Used Combined Planing Machine for sale (92,879)

Condition: new, With a 520 mm planing width, motorized thickness table adjustment, and comfort switching Tjdpfx Aoxnqyheb Ded - Stable steel and cast iron construction - Large, ribbed jointer tables made of cast iron - Smooth operation due to high dead weight - Four feed speeds - Motorized thickness table lift with two speeds and digital display - Segmented pressure beam at the infeed - Precision ball bearings on the four-knife cutterblock - Helical, hardened steel infeed roller for especially consistent and gentle wood feed - Outfeed roller with rubber coating - Large tiltable fence, adjustable from 90° to +45° - Standard auxiliary fence included - Powerful industrial motor - Pneumatic quick-change system with pneumatic raising and lowering of the jointer table - The extraction port remains in the same position for both jointing and thicknessing operations—no need for additional extraction hoses, inconvenient switching, or rerouting around the machine Scope of delivery: Technical Data: Dimensions and Weights: - Length (product): approx. 2300 mm - Width/Depth (product): approx. 1100 mm - Weight (net): approx. 980 kg Jointer: - Total table length: 2300 mm - Infeed table length: 1200 mm - Working height: 930 mm - Max. planing depth: 6 mm - Fence length: 1200 mm - Fence height: 190 mm - Fence tilt: 90 – 45° Extraction connection: - Extraction port diameter, thicknesser: 120 mm Installation Information: - Space requirement, length: 2300 mm - Space requirement, width/depth: 1610 mm Explanation: Max. travel paths or usable lengths are taken into account. - Machine body length: 1235 mm - Machine body width/depth: 850 mm - Working area length: 1000 mm - Working area width/depth: 3500 mm Note: Please add the working area to the space requirement to determine the recommended free installation space for the machine. Thicknesser: - Min. working height: 3.5 mm - Max. working height: 250 mm - Max. cutting depth: 8 mm Electrical Data: - Main drive motor power: 7 kW - Connection voltage: 400 V - Frequency: 50 Hz Cutterblock: - Cutterblock type: TERSA - Cutterblock diameter: 120 mm - Number of knives: 4 - Cutterblock speed: 5000 rpm - Max. planing width: 520 mm Feed: - Feed speed: 5/8/12/18 m/min

Condition: new, Working width 318 / 295 mm Tsdpfx Abou Imn Ns Dod Working height 170 mm Motor output 2,25 kW Length of the planing table 1300 mm Number of knives 3 St. Feed speed 5,3 m/min. Dust suction hood 100 mm connected load frequency 400 V machine weight ab. 160 kg Dimensions (L/W/H) 1150 x 530 x 930 mm The planer and thicknesser is delivered almost fully assembled. For thickness planing, the same connection is used for suction as for surface planing used. However, this is placed upwards over the storage table.

Condition: good (used), Working width 630 mm Working height 230 mm Todpfx Abew In E Ae Ded Motor output 5 kW Length of the planing table 2100 mm Number of knives 4 St. Feed speed 10 / 16 m/min. machine weight ab. 1300 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2300x1150x980 mm Tsdjv A Hhujpfx Ab Ded Weight 900 kg Total power requirement 7,5 kw

Condition: new, Ideal for demanding craftsmen and carpentersThe particularly long dressing tables made of one piece enable easy dressing of the workpiecesWork tables are made of gray cast iron, making them robust and permanently flatRear-opening dressing tables with tension spring support for quick and easy retoolingThanks to the fixed extraction hood, it is not necessary to reposition the extraction hose during retooling, This saves valuable working timeHelically toothed steel infeed roller ensures constant and even wood infeedRubber outfeed roller in the thickness run-out ensures even wood outfeedMaterial feed with four speedsPlane thicknessing table adjustment via handwheel with integrated display for the planing heightDIGITAL: with electric thicknessing table height adjustment and digital displayOn/off switch in operator positionPowerful industrial motorThe high machine weight ensures maximum precision and smooth paration for slot drilling deviceQuality Made in ItalyTECHNICAL DATADimensions and weightsLength (product) approx. 2250 mm Width/depth (product) approx. 1370 mmWeight (net) approx. 695 kgJointerTotal length of tables 2250 mmChip removal max. Dressing 5 mmDressing fence length 1200 mmDressing fence height 150 mmSuction connectionSuction nozzle diameter thickness 1 x 120 mmInstallation informationSpace requirement length 2250 mmSpace requirement width/depth 1440 mmExplanation of space requirement: The dimensions take into account maximum travel distances or effective cknessThicknessing table length 520 mmThicknessing table width 850 mmWorking height thickness min. 3 mmWorking height thickness max. 240 mmWorking length thickness min. 220 mmChip removal max. thickness 5 mmElectrical dataDrive motor power 7 kWSupply voltage 400 VMains frequency 50 HzPlaner cutterheadPlaner shaft type TERSAPlaner shaft diameter 120 mmNumber of planer knives 4 pcsPlaner shaft speed 5000 min¯¹Planer width max. 520 mmFeedFeed speed 5/8/12/18 m/minSCOPE OF DELIVERYJointer-jointer fence with round bar guide4 feed speedsTersa planer shaftManufacturer no.5503501 Todpfx Absvwflbo Dsd

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1480x580x1120 mm Weight 280 kg Tsdpfx Aevz E Drsb Dsd Total power requirement 2,2 kw

Condition: new, Exhibition machinemain features:quick changeover system to open the tables,speed, ergonomics and safetywork table adjustment via parallelogramdurable precisiontechnical data:usable working width 520 mmtotal table length 2310 mmcutterhead D 120 mmplaner shaft speed 5000 rpm.4 knives 35 mm x 3 mm x 520 mmaluminum planing fence 1200 mm x 190 mmplaning fence inclination from 90° bi s-45°min./max. planing height 3 / 250 mmfeed speed thickness 5-8-12-18 m/tion stroke diameter dressing 120 mmsuction stroke diameter thickness 120 mmbasic equipment and accessories- work table adjustment in infeed by means of parallelogram system,for chip removal by means of degree scale- simultaneous height adjustment and locking of the work tables completewith anti-tilt device- quick changeover system for changing from dressing to thickness machining(CE version) by means of a special support for opening the dressing tablesand an autom. pneumatic positioning system of the suction hood, withhydraulic system- "READY" electronic control. Includes:* Thicknessing table adjustment* Manual, semi-automatic and automatic modes with 99storable work programs* Additional functions: Calculator and hour meter- Machine table with height adjustment through 4 steel threaded spindles- Feed with independent motorization Thickness- Rubber coated feed roller in outfeed- Link pressure shoes in infeed- Planer shaft and cutter holder with markings as positioning aid, withsetting gauge for planing knives- automatic star delta start for main motor- motor power kW9 Hz50 (kW 11 Hz60) (S6 -40%)[S1] kW7,5 PS10 Hz50 (kW9 PS12 Hz60)[S6 -40%] kW9 PS12 Hz50 (kW11 PS15 Hz60)- Operating toolsSafety/protection- Micro-protection switch for the correct positioning of the dressing tablesand extraction hoods- Dressing protection hood (CE Ausf.)- Automatic motor brake on main motor- Thermal protection switch- 110V auxiliary circuit- Emergency stop switch- Lockable main switch- CE declaration of conformity (CE version)Consisting of:R0.20.20 Linvincibile FS 7 CE version93.07.31 Volt 400 EU93.12.01 Frequency 50 Hz34.02.15 "TERSA" cutterhead with disposable reversible knivesComplete with a set of knives24.06.15 Swivelling auxiliary fence for thin workpieces08.32.28 base Tjdpfx Asvxr Sweb Djd

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1800x740x1000 mm Weight 420 kg Total power requirement 4 kw Tedpfx Ajvz Expjb Dsd

Condition: used, Year of construction: 1991, used Manufacturer: Casadei Model: FS 51 Year of manufacture: 1991 Machine no.: H 5884 Motor: 4 kW Planing width: approx. 510 mm Planing height: approx. 230 mm Table length: approx. 2200 mm Infeed and outfeed tables can be tilted - complete Tjdpew U Emdefx Ab Djd Slotted table lips Low-noise table lips Motorized automatic brake Number of knives: 4 pcs Safety cutter block Table roller: 1 Feed rate: 8 + 14 m/min Digital display for planing height Electric height adjustment Extraction port diameter: 140 mm Space requirement approx. 2200 mm x 1300 mm x 1000 mm Weight: approx. 900 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in its current condition as inspected, without warranty or guarantee

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1800x740x1000 mm Weight 420 kg Todpovz Ewlefx Ab Djd Total power requirement 4 kw

Condition: new, - Maximum equipment for the professional with Tersa knife shaft.- Ideal for demanding craftsmen and joiners- The particularly long planing tables enable easy dressing of the workpieces- Work tables are made of gray cast iron, because of that insensitive and permanently flat- To the rear, planing tables that open at the same time for short set-up times- Helical-toothed steel feed roller ensures constant and even wood intake- Rubber pull-out roller in the outlet of the thickness ensures even wood pull-out- Material feed at four speeds- Plane thickness table adjustment via handwheel with numerical display for the planing height- TERSA planing knife system enables Knife changes within seconds as well particularly quiet running- The large planing fence (1200 mm x 150 mm) can when opened the planing tables remain in position- The high machine weight ensures the highest Precision and smooth running- Preparation for slot drilling equipment Digital version with electric thicknessing table adjustmentTechnical specificationsTotal length of the tables 2250 mmWorking width 520 mmmax. chip removal 5 mm--- Technical data thickness ---Dimensions thickness table 520 x 850 mmmin./max. Working height 3/240 king length thickness 220 mmFeed speeds 5/8/12/18 m / min Planer shaft diameter / planer knife 120 mm / 4 ed ??5,000 rpmMotor 400V / 50Hz / S6-40% 7.0 kW (9.5 HP)Extraction nozzle diameter 1 x 120 mmWeight 695 kg Slot drilling device (option)Table size 470x230 mmCross / longitudinal stroke 160mm / 110 mmVertical stroke 120 mmExtraction nozzle diameter 1x120 mmManufacturer number 5503511 Tsdpfx Abovwd U Is Djd

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1480x580x1120 mm Weight 280 kg Total power requirement 2,2 kw Todpevz Eqxofx Ab Dod

Condition: used, with Tersa knife shaft used, good condition Make Müller Brugg Type DA 6 M Planing width approx. 610 mm Planing height approx. 220 mm Table length approx. 2200 mm Bridge protection Slotted table lips Low-noise table lips Number of knives 4 pieces Knife system - Tersa reversible knives Table sliding rollers Space required approx. 2300 mm x 1500 mm x 1100 mm Weight approx. 2000 kg Tedpfxovwgh Re Ab Ded Storage location 97447 Gerolzhofen, free loading, unpacked Handed over in the current condition as viewed, without guarantee or warranty

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2200x745x1100 mm Weight 580 kg Total power requirement 4 kw Todsvz Emyjpfx Ab Dsd

Condition: new, - new -manufactured by Holzkrafttype FS 41 elite S Tersa DigitalDigitale version with motorischer Dickentischverstellung- Hobelmessersystem ermögclear opening sekundenschnellescutter change soas particularly geräuscharmer Lon- Besonders lange Abrichttische (2200 mm)aus einem piece ermöglichen leichtes  Abrichten derWerkstücke- Arbeitstische sind aus Grauguss, nachgeglüht andspannungsfrei, dadurch unempfindlich and dauerhaft planar- Gleichzeitiges opening der tables- to rear, gleichzeitig öffnende Abrichttische for kurzeRüstzeiten- Leistungsstarker Industrie-motor- Festmontierte dust extraction hood- robuste steel-/Graugußkonstruktion- Gleichzeitiges opening der tables- großer surface fence (serial-production with auxiliary fence)- Materialvorschub with two speeds aboutspearatem motorTechnische Daten:total length der tables:  2200 mmworking width:   410 mmmax. chip removal: 5 mmthickness:dimensions Dickentisches: 775x410 mmmin/max. working height:  3/240 mmfeed speeds: 6/12 m/elwellen D./Hobelmesser: 95 mm/4 piecerpm:   5000 1/minmotor 400 V/50 Hz/S6 - 40 % 5,0 kW (6,6 PS)suction nozzle diameter: 1 x 120 mmweight:    450 kgArt-No.: 550 3441located in: 97447 Gerolzhofen- free on truck- Tjdpfxjvwgc Uo Ab Dod

Condition: new, - new -BeschreibungMit TERSA cutter block for sekundenschnelles HobelmesserwechselnTERSA-Hobelmessersystem ermögclear opening particularly geräuscharmen Lonangular verzahnte steel input roller for konstanten and gleichmäßigen HolzeinzugDie particularly langen Abrichttische aus einem piece ermöglichen leichtes Abrichten der WerkstückeGroßer surface fence kann beim opening der Abrichttische in seiner Position bleibenNach rear öffnende AbrichttischeDas hohe Maschinengewicht sorgt for höchste Präzision and ruhigen LonLeistungsstarker Industrie-motorRobuste steel-/GraugusskonstruktionArbeitstische aus Grauguss, nachgeglüht and spannungsfrei, dadurch unempfindlich and dauerhaft planarsurfacing table lip plates for geräuscharmen LonAusstattungsdetails:TERSA-HobelmesserwelleKein Einstellen and Schrauben mehrHobelmesserwechsel in SekundenSelbstarretierendBesonders low noisePerfektes HobelergebnisAbsaugschlauch-AnschlussDie suction nozzle der surface planer and thickness zeigen in the selbe Schlauchanschluss erfolgt from nur einer side wird kein Schlauch benötigt, der um the machine veStabil ausgelegter KettenantriebAntriebsräder aus steelMassiver GraugusslagerbockHobelwerkMassive Rückschlagsicherungen verhindern den kick-back from WerkstückenTERSA-Hobelmesserwelle with three Messern sorgt for ein optimales HobelbildDer MaterialeinzugSchrägverzahnte Stahleinzugswalzen for einen konstanten and gleichmäßigen Materialeinzug without AbdrückeMehreright hand Zähne greifen gleichzeitig for kraftvollen feederVerschleißfrei im Gegensatz zu GummieinzugswalzenTechnische Daten:dimensions and Gewichtelength (Produkt) ca.     2015 mmweight (Netto) ca.     330 kgwidth/depth (Produkt) ca.     990 mmdrive powercapacity driving motor     5 kWsurface planertotal length der tables     1800 mmchip removal max. surface planer     4 mmworking height     900 mmAnschluss Absaugungsuction nozzle diameter thickness     2 x 120 mmAufstellinformationenrequired space length     2015 mmMaschinenkörper width/depth     596 mmrequired space width/depth    1 460 mmworking dimensions length     1000 mmErläuterung required spaceDie dimensions berücksichtigen maximale Verfahrwege or Nutzläking dimensions width/depth     3500 mmMaschinenkörper length     659 mmErläuterung zu working dimensionsDie angegebenen dimensions bitte with dem required space addieren, um the for the machine empfohlene freie assembly area zu cknessDickentisch length     605 mmworking height thickness max.     230 mmDickentisch width     420 mmchip removal max. thickness     4 mmworking height thickness min.     3 mmElektrische DatenAnschlussspannung     400 VStromart     ACPhase(n)     3 PhNetzfrequenz     50 HzHobelmesserwelleHobelwellentyp     TERSAHobelwellendrehzahl     5200 min¯¹Hobelwellendurchmesser     72 mmplaning width max.     410 mmnumber of Hobelmesser     3 Stfeederfeed speed     7 m/minincluded in deliveryTERSA-Hobelmesserwelleeloxierter Aluminium-surface fenceNo. 550 3414 Tsdpfsvwga Hsx Ab Djd

Condition: new, - NEW -- With TERSA cutter block for secondsChange planer knives- TERSA planing knife system enables particularlyquiet running- Helical-toothed steel feed roller forconstant and even wood intake- The particularly long planing tables from onePiece allow easy dressing of theWork pieces- Large planing fence can open when openingthe planing tables remain in position- Planing tables that open to the rear- The high machine weight ensures the highestPrecision and smooth running- Powerful industrial engine- Robust steel / cast iron construction- work tables are made of gray cast iron,post-annealed and stress-free, therebyinsensitive and permanently flat- Table lips for quiet runningEquipment detailsTERSA planing knife shaft- No more adjusting and screwing- Blade change in seconds- Self-locking- Particularly quiet- Perfect planing resultSuction hose connection- The suction nozzle of the planer and thicknesspoint in the same direction.- The hose connection is made by just oneSide off.- No hose is needed aroundthe machine passes ve- Stable chain drive- Steel drive wheels- Solid cast iron bearing blockPlaning mill- Prevent massive kickback protectionthe kickback of workpieces- TERSA planing knife shaft with three knivesensures an optimal planing patternThe material feed- Helical steel feed rollers for oneconstant and even material intakewithout prints- Multiple teeth grip at the same time for powerfulFeed- Wear-free in contrast to rubber feedrollingTechnical specifications:Length approx. 1725 mmWidth / depth approx. 880 mmWeight approx. 270 kgDressing chip removal max. 4 mmExtraction nozzle thickness 2 x 120 mmThick working height min. 3 mmThick working height max. 230 mmThickness of the chip removal max. 4 mmDrive motor power 4 kWConnection voltage 400 VMains frequency 50 HzPlaner knife shaft type TERSANumber of planing knives 3 pcsSpeed ??5200 min¯¹Planing width max. 300 mmFeed speed 7 m / minItem No. 5503031Storage location 97447 Gerolzhofen- free loaded- Todpfovwgaajx Ab Ded

Condition: new, Type 300C Todpfx Ajd Nl Skjb Dsd Surface planer: Table dimensions 300х1500 mm Cutterblock diameter 70 mm Cutterhead rotating speed 5700 rpm 3 knives 300x20x3 mm Max table adjustment 4 mm Thickness: Table dimensions 300x660 mm Max cutting depth 4 mm Feed speed 7 m/min Cutterblock rotation speed 5700 rpm Max working height 220 mm Min working height 4 mm Mortising: Table dimensions 250х500 mm Longitudinal stroke 205 mm Trasversal stroke 95 mm Chuck (SX) 16 mm Chuck rotation speed 5700 rpm Motor 2,2 kW Accessories: service wrenches, guards on mortise chuck, planer guide. Weight 290 kg

Condition: new, Type 400C Surface planer: Table dimensions 400х1800 mm Cutterblock diameter 70 mm Tjdpfx Aed Nl Sfjb Dsd Cutterhead rotating speed 5700 rpm 3 knives 400x20x3 mm Max table adjustment 4 mm Thickness: Table dimensions 400x760 mm Max cutting depth 4 mm Feed speed 7 m/min Cutterblock rotation speed 5700 rpm Max working height 220 mm Min working height 4 mm Mortising: Table dimensions 250х500 mm Longitudinal stroke 205 mm Trasversal stroke 95 mm Chuck (SX) 16 mm Chuck rotation speed 5700 rpm Motor 3 kW Accessories: service wrenches, guards on mortise chuck, planer guide. Weight 390 kg

Condition: used, Year of construction: 2001, with air cushion table, chamfering unit Maximum working width: 260 mm Maximum working height: 160 mm Number of spindles: 6 units 1st spindle: bottom Spindle diameter: 40 mm Clamping length: 270 mm Rotational speed: 6000 rpm Motor power: 11.0 kW 2nd spindle: right Spindle diameter: 40 mm Clamping length: 170 mm Rotational speed: 6000 rpm Motor power: 11.0 kW 3rd spindle: left Spindle diameter: 40 mm Clamping length: 170 mm Rotational speed: 6000 rpm Shared motor with right spindle, with ATS/M system (automatic positioning control) 4th spindle: top Spindle diameter: 40 mm Clamping length: 270 mm Rotational speed: 6000 rpm Motor power: 11.0 kW With ATS/M system (automatic positioning control) 5th spindle: top, chamfering unit 6th spindle: bottom Spindle diameter: 40 mm Clamping length: 270 mm Tjdpfx Aexr A Npsb Ded Rotational speed: 6000 rpm Motor power: 11.0 kW Motor brakes: mechanical Electrical hood interlock: Yes Height adjustment of top spindle: electric with feed Feed brake system: Yes Feed speed steplessly adjustable up to: 3 - 26 m/min Feed roller pressure: pneumatic Feed power: 4.0 kW Feed drive: cardan shaft Lubrication pump: automatic Max. jointing cutting depth: 10 mm Jointing cutter on jointer: Yes Driven rollers in table: 1 unit Control type: PLC control Spindle measurement display: digital readout Infeed rollers before jointer: Yes Air cushion table: two-lane Central lubrication point: Yes Description: Jointer table with jointing fence 1.0 m, pneumatic pressure Infeed roller before jointer driven rollers in table Total connected load: 52 kW Location: supplier

Condition: excellent (used), CATALOG NUMBER: 7081 TECHNICAL SPECIFICATIONS - JOINTER: - Shaft width: 260 mm - Table length: 1190 mm - Cast iron fence, angle adjustable - Adjustable tables - THICKNESSER: - Max workpiece thickness: 110 mm - Thicknesser shaft guard - From above: - Anti-kickback fingers Todpfx Abonabqzo Dsd - Toothed feed roller - Planing shaft - Smooth outfeed roller - Extraction port diameter: 85 mm - CIRCULAR SAW: - Max blade diameter: 160 mm - Cutting height: 25 mm - Blade bore diameter: 30 mm - Blade height adjustable (up/down) - Blade guard - Cutting width with fence: 160 mm - Table dimensions: 710 x 420 mm - SPINDLE MOULDER: - Spindle diameter: 30 mm - Spindle height adjustable (up/down) - Spindle height: 110 mm - Max tool diameter: 190 mm - Fence - Motor approx. 2.2 kW - Dimensions (L/W/H): 1200 x 900 x 800 mm - Weight: 325 kg ADVANTAGES - Compact, takes up little space - Very good condition - Used multifunctional machine Net price: 7,900 PLN Net price: 1,880 EUR (based on 4.2 EUR/PLN exchange rate) (Prices are subject to change due to currency fluctuations)

Condition: used, Year of construction: 2014, Cannon/Breyer Combined extrusion thermoforming line for producing of continous 6-layer PE plate to thermoform automotive tanks Max. plate size: 1500x1600mm min. plate size to be precessed: 500 x 500mm max. plate thickness: 10mm min. plate thickness: 4,0mm max. plate weight: approx. 24kg (bei 1600x1500x10 mm) processing height: approx. 700mm max. capacity: 1.100 to 1.170 kg/h Comprising: Breyer Extrusion Line composed of - Breyer Extruder 105mm for HDPE and Master batch - Breyer Extruder 120mm for HDPE Regrind Tsdpexpxfbsfx Ab Djd - Breyer Co-Extruder 45mm for HDPE ADMER - Breyer Co-Extruder 45mm for HDPE EVOH LDPE - Breyer Extruder 105mm for HDPE Cannon thermoforming press (7x) Kuka Industrial robots for plate supply to press, feeding of internal tank parts, unloading from press, edge trimming, loading/unloading to calibration station FDM/Piovan batch supply Vacuum supply Tempering units for tooling Condition: Good

Condition: new, Year of construction: 2025, Surface planer minimax fs 41es TERSA Maximum equipment for the professional. Part number 5503431 Brand Holzkraft / SCM Diagonally toothed steel feed roller for constant and even material feed, resulting in chip removal from as little as 0.2 mm (with min. workpiece thickness of 3 mm) - ideal for economical planing of precious woods Models with TERSA cutterblock for changing planing knives in seconds and particularly quiet running Material feed with two speeds Particularly long dressing tables allow easy and precise dressing of workpieces Work tables made of gray cast iron, annealed and stress-free, thus insensitive and permanently flat Dressing tables opening to the rear simultaneously for short set-up times Planer thickness table adjustment via handwheel with numerical display for planer height Cgiptddi High machine weight for maximum precision and smooth running Powerful industrial motor Robust steel/cast iron construction Quality - Made in Italy TECHNICAL DATA Dimensions and weights Length (product) approx. 2200mm Weight (net) approx. 450kg width/depth (product) approx. 1160mm Dressing table Total length of tables 2200mm Dressing fence length 1200mm Working height 905mm Dressing fence height 150mm chip removal max. dressing 5mm Connection suction Suction port diameter thickness 1 x 120mm Thickness thickness table length 775mm working height thickness max. 240mm Thickness table width 410mm Chip removal max. thickness 5mm Working height thickness min. 3mm Electrical data Power drive motor 5kW Mains frequency 50Hz Supply voltage 400V Planer cutterhead Planing shaft type TERSA Planing shaft speed 5000min¯¹ Planing shaft diameter 95mm Planing width max. 410mm Number of planing knives 4pcs Feed rate feed speed 6 / 12m/min SCOPE OF DELIVERY Tjdpfxolht Hto Ab Djd Planer jointing fence with round bar guide & auxiliary fence Two feed speeds Tersa planer shaft Location: Ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2017, Cannon/Breyer Combined extrusion thermoforming line for producing of continous 6-layer PE plate to thermoform automotive tanks Max. plate size: 1500x1600mm min. plate size to be precessed: 500 x 500mm max. plate thickness: 10mm min. plate thickness: 4,0mm max. plate weight: approx. 24kg (bei 1600x1500x10 mm) processing height: approx. 700mm Todoxpxc Tjpfx Ab Djd max. capacity: 1.100 to 1.170 kg/h Comprising: Breyer Extrusion Line composed of - Breyer Extruder 105mm for HDPE and Master batch - Breyer Extruder 120mm for HDPE Regrind - Breyer Co-Extruder 45mm for HDPE ADMER - Breyer Co-Extruder 45mm for HDPE EVOH LDPE - Breyer Extruder 105mm for HDPE Cannon thermoforming press (8x) Kuka Industrial robots for plate supply to press, feeding of internal tank parts, unloading from press, edge trimming, loading/unloading to calibration station FDM/Piovan batch supply Vacuum supply Tempering units for tooling Condition: Good

Condition: excellent (used), 5-axis combined machine (thickness planer, jointer, mortiser, saw, and router) Thickness planer: Usable width: 310 mm Usable height: 230 mm Cutter block: 3 planer knives Joint planer: Usable width: 310 mm Table length: 1400 mm Shaft diameter: 70 mm Tsdpowh U Eqofx Ab Ded Router: Spindle diameter: 30 mm, length: 125 mm Table width: 800 mm Router stop Saw: Saw blade diameter: 250 mm, pivotable by 45°. Cutting height with 250 mm blade: 80 mm Table width: 800 mm Rip fence length: 635 mm Mortise drilling machine: Mortise milling from (0 to 16 mm) Power and motors Voltage: 380 V Connection: Three-phase Location: From stock, 54634 Bitburg - Available immediately -