Used Colorization for sale (7,426)

Condition: like new (used), Year of construction: 2021, operating hours: 180 h, functionality: fully functional, machine/vehicle number: 35120025 (inkl. Zubehör 35120030/35120035/35120040), type of input current: three-phase, space requirement height: 2,010 mm, space requirement length: 2,374 mm, space requirement width: 754 mm, Sollich nut mixing unit, type NM 200 VA, year of manufacture 2021, for the continuous mixing of dry ingredients into chocolate, fat, and spreadable products. Performance: • max. 1,200 kg/h of spreadable product with 5% dry ingredients (60 kg/h) • max. 1,200 kg/h of spreadable product with 10% dry ingredients (120 kg/h) Equipment: • retractable mixing screw for simplified cleaning, recommended for frequent product/color changes • 2 installed rotary valve feeders TD 1 (machine no. 35120030 and 35120035), arranged opposite each other, each with a level switch and a 150-liter hopper. This allows two different dry ingredients to be dosed in parallel or double the dosing capacity for one dry ingredient to be achieved. • Double-walled collection hopper at the mixer outlet with emptying pump SKP 1000 L-VA (machine no. 35120040) • Unheated connecting pipe attached to the side of the lower container section to the hopper for complete emptying via the attached rotary lobe pump SKP 1000 L-VA, can be shut off on both sides with flat flap valves, pipe can be removed via milk pipe fittings and quick-release couplings. • Hot water circulation system with water-water heat exchanger and circulation pump to supply the mixer, collection hopper, emptying pump, and piping to the filling system, for connection to the customer's cold water supply. • Stainless steel control cabinet for housing the power electronics • Visualization and operation are carried out ex works via the HMI of the associated tempering machine; a separate operating panel is not part of the unit. Hfsdpfx Aozzvhdsk Ujl • Completely installed on a mobile stainless steel frame with swivel casters or lifting tabs for moving with a lifting device, frame with ergonomic handle, all media connections are pluggable or with quick-release couplings. This makes the unit mobile and can be switched between several lines. For operation with another control system, an adjustment of the visualization is required; the power electronics are included in the supplied stainless steel control cabinet. Connection requirements: • customer's cold water for the hot water circulation system • 400 V, 3 phases, 50 Hz + neutral + earth Condition, history and process: Year of manufacture 2021, delivery and commissioning by Sollich in week 40/2021, approximately 180 operating hours. Used exclusively for palm oil-free spreads including nut-containing products, stored dry in Wuppertal since the end of 2024, inspection by appointment. Documentation and conformity documents are available. Purchase value in 2021 according to order confirmation: €116,830 (unit complete including rotary valve feeders, emptying pump and stainless steel frame). Sale from business to business with exclusion of warranty, technical specifications according to manufacturer's documents, subject to errors. This nut mixing unit is also available as part of a complete tempering and mixing system (including Turbotemper TE 1600 D and cooling unit), see advertisement ID A22725782.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: c5200s, resolution (max.): 1,200 dpi, paper weight (min.): 53 g/m², paper weight (max.): 360 g/m², number of feeding trays: 3, counter reading (black): 18,921, counter reading (color): 127,434, Equipment: auto duplex, We offer: Ricoh Pro C5200 Multifunction fully functional professional printing device with low printer for wholesale purchase. Counter: Black: 18 921 pages Colour: 127 434 pages You can view the device in person or watch a video of it in operation. The gallery includes photos of the toner stack, the counter, and test samples of color printing on thicker paper. Please contact us with any questions. Hfjdpfezyam Isx Ak Uol We can help arrange transport. The price is negotiable. Specification General: -Continuous print speed: 65 pages per minute -Warm-up time: Less than 120 seconds -Maximum monthly duty cycle (ppm): 150,000 pages per month -Dimensions (W x D x H): 799 x 880 x 1648 mm (including ADF and status light) -Weight: Less than 262 kg -Duplex printing: Yes Paper: -Paper weight: A4/LT cassette (optional): 52.3 - 216.0 g/m² / SRA3 cassette (optional): 52.3 - 360.0 g/m². Paper weight (from bypass tray) 52.3 - 360.0 g/m² -Paper weight (from cassette) 52.3 - 300.0 g/m² -Recommended paper size A6 to SRA3. Length up to 1260 mm. -Maximum paper input capacity 8250 sheets -Paper output capacity 3000 sheets Printer -Maximum print resolution 1200 x 4800 dpi VCSEL Copier -Copying process 4-drum, dry electrostatic transfer with internal transfer belt. Oil-less belt fusing method -Maximum copy resolution 1200 x 4800 dpi VCSEL Scanner -Scanning speed: 110 (single-sided) / 220 (duplex) -Scanning resolution: 100/150/200/300/400/600 dpi (default: 200dpi). -Original size: 297 x 432 mm

Condition: good (used), functionality: fully functional, Year of construction: 2017, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control system: Basic Rexroth IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Closed machine frame - Hybrid axis system - Linear magazine with 20 slots for clamping jaws and tools - Drives with maintenance-free three-phase motors - Follow-up device with programmable clamping beam - Foot pedal for clamping jaw closure - Beam protection - Dividing chute on the right - Part flap on the left - Sensor for part flap Hjdozy Hpispfx Ak Usfl - Work area lighting - FocusLine - Protective tool TRUMPF Laser - Solid-state laser TruDisk 3001 with one laser beam cable (LBC) output - LBC according to standard layout (10 m) - Laser power control - Laser logbook function - Enclosed beam guidance via laser beam cable (LBC) The TruDisk laser is subject to international export control. According to EC Dual-Use Regulation 428/2009 (lasers covered under 6A005). Compact cutting unit - Solid-state laser compact cutting unit - Protective glass - Collision protection - ControlLine Punch head - Delta Drive - Rotatable mono-tool holder - Programmable clamping beam position - Tool length compensation - Spray lubrication for the punch - Scrap extraction - Forming function - Stroke counter for the punch Control system - TRUMPF control system based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color display - Integrated technology data - Programmable cutting gas pressure - Teleservice interface via Internet - Automatic shutdown including wake-up function - Program management - Production plan Data transfer - USB interface - RJ45 network connection - Central Link Safety - CE marking - Multi-beam light curtains - Protection against scattered radiation Extended laser equipment - Copper cutting package - Brass cutting package Extended punching equipment - MultiTool function - MultiBend function - Thread forming function with thread counter - Signing/fast beading function - Engraving function - Deburring and rolling technology function - Adaptive stroke calibration - Spray lubrication for the die and level monitoring - Smart Punch Monitoring Part removal - Integrated sorting function for dividing chute - Sensor for dividing chute - Container track for 4 standard containers - Containers supplied by the customer Special sheet metal processing - Brush tables - Loading and unloading aid for brush tables Options Compact dust collector - CO2 extinguishing system for the compact dust collector Data transfer - Wireless operation point SheetMaster Compact 2500x1250mm (AK05) - Suction frame - Unloading trolley for scrap grid and microjoint sheets - Loading station with spreader magnet for separating sheets - Double sheet detection - Vacuum sensor - 2nd operator station for loading and unloading - Compact installation (double-wing swing doors) - Peeling system

Condition: used, 1 Farben Offsetdruckmaschine - 1 Color Sheet-Fed Offset Press HAMADA 500 CDASerial-No. HR-6462 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Hjdpfx Ash Aw Ucok Uefl Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), Year of construction: 2009, operating hours: 93 h, machine/vehicle number: GS000526, Size 36 x 52 cm, Alcolor Vario dampening system, Technotrans cooling and recirculation system, Ink unit temperature control, Anicolor inking units, Double sheet detection, Side guide control, Blanket washer, Roller washer, Impression cylinder washer, Autoplate system, IR dryer, Extended delivery. Hfodpfx Akjznl T As Uel

Condition: good (used), Year of construction: 1998, functionality: fully functional, total length: 2,860 mm, total width: 1,850 mm, Two-color offset printing press Heidelberg Speedmaster 52-2 Year of manufacture: 1998 Number of impressions: 63 million Equipment: Heidelberg CPTronic Heidelberg suction head with lifting/dragging suction grippers Heidelberg Autoplate with Heidelberg register system Alcolor dampening system Numbering and embossing unit Interface adapter for connecting external devices Largest sheet size: 37 x 52 cm Smallest sheet size: 10.50 x 14.50 cm Hjdpfxezwhbbo Ak Uofl Max. printing area: 36 x 52 cm Max. printing speed: 15,000 sheets/hour

Condition: used, 1 Farben Offsetdruckmaschine / 1 Color Sheet-Fed Offset Press Heidelberg SORK Hfodpfx Akev Ezfmj Uol Year 1978 - Serial-No. 514329 Size max. 480 x 650mm Dampening System conventionel Guter Zustand - Schneidmaschine aus einer Schule / Good condition machine is from School. Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), mileage: 127,752 km, fuel type: diesel, Year of construction: 2011, Equipment: ABS, AdBlue, EBS, air conditioning, airbag, central locking, compressor, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, hill-start assist, navigation system, parking heater, power assisted steering, power mirror, soot filter, tachograph, tire pressure monitoring, traction control, For sale: a Scania P320 6x2 truck with a Zoeller garbage compactor body. The vehicle was imported from Germany and previously used by municipal services in Würzburg. The truck has a complete set of German documents. The engine starts, and the vehicle runs. The cab and body show normal signs of wear and tear, consistent with the vehicle's age and intended use. Technical specifications: Make: Scania Model: P320 Type: P320 DB6X2*4MNB Year of manufacture / first registration: 2011 Date of first registration: 29.11.2011 Hjdpfx Ajz Atndek Uofl Mileage: 127,753 km Diesel engine: 9,290 cm³ Power: 235 kW / 320 hp Axle configuration: 6x2 Gross vehicle weight: 26,000 kg Curb weight: 15,400 kg Number of seats: 3 Body: Zoeller garbage compactor Color: orange VIN: YS2P6X20002067000 Vehicle dimensions: Length: approximately 9,900 mm Width: approximately 2,550 mm Height: approximately 3,720 mm The vehicle is equipped with, among other things, a reversing camera, air conditioning, a pneumatic driver's seat, electric windows and mirrors, work lights, and a rear container loading system.

Condition: used, Year of construction: 1998, impressions 91 Mio. max. printing speed sheets 15000 /h Hfsdpfx Akozwqb Re Uol max. paper size 38 x 52 cm numbering unit + Version optional with numbering unit

Condition: used, Year of construction: 2006, 38 Mio. prints approx. Format: 370×520 mm (14×20″) Easyplate CP-Tronic, Alcolor Streamfeeder Low-pile delivery Hjdpfx Aezzwrdek Ujfl Perfecting Powder sprayer Available: at short term

Condition: used, mileage: 97,000 km, power: 90 kW (122.37 HP), first registration: 11/2017, fuel type: diesel, overall weight: 3,100 kg, next inspection (TÜV): 03/2026, color: white, gearing type: mechanical, emission class: euro6, loading space length: 2,750 mm, loading space width: 1,600 mm, loading space height: 1,330 mm, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Special equipment: Audio navigation system NAC 3-D, DAB with color display, front and rear parking sensors incl. rear view camera, increased payload, tailgate, fixed window, wooden floor in cargo area with anti-slip profile and side paneling (wood) with wheel arch covers, partition wall with window in cargo area, sound and thermal insulation, front side airbags, auxiliary heater Additional equipment: Driver and passenger airbags, dual passenger seat, onboard computer, driver assistance system: hill start assist, body type: panel van, lumbar support for driver's seat, adjustable, adjustable steering column, engine 2.0 L - 90 kW Blue-HDI FAP, wheelbase 3275 mm, spare wheel with standard tire, low emissions according to Euro 6, right sliding door, SCR system (AdBlue technology), full-depth side protection strips, visibility package, height-adjustable driver's seat, seat upholstery: fabric, steel rims 7x16, Start/Stop system, 12V socket in load compartment, 12V socket in center console, seat heating The vehicle is in good condition! Internal cargo area dimensions: L 2.75 m x W 1.60 m x H 1.33 m Last inspection at 96,028 km Hjdpfjz Aralex Ak Usfl Only 1 vehicle key Financing available through Santander Bank

Condition: used, empty load weight: 9,329 kg, maximum load weight: 26,671 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 12/2018, next inspection (TÜV): 01/2027, loading space length: 13,324 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, total length: 26,000 mm, total width: 40,000 mm, total height: 140,400 mm, suspension: air, tire size: 385/65 R22,5, color: white, Year of construction: 2018, front tire size: 385/65 R22,5, rear tire size: 385/65 R22,5, emission class: none, Equipment: ABS, ABS, axle manufacturer Schmitz SCB, type: freezer trailer, operating hours: diesel hours 11,439 / electric hours 3,328, double-deck without beams, electrical connection, color: white, suspension: air suspension with lift function, lifting and lowering, cooling type: transport cooling with diesel drive & stationary cooling, lift axle: 1st axle, air distribution channels, air distribution mat, pallet box for 36 + 8 pallets, portal door, brake: disc brake, start/stop function, temperature recorder DataCold T 600, refrigeration unit type Carrier Vector 1950 Mt d/e, evaporator 2, anti-spray, partition, edge protection profiles, circulation wall, aluminum floor, remote thermometer, load securing rail, 2x 7-pin + 15-pin electrical connections, compressible roller ramp buffers (DRP), 2x reversing lights LED. Hfedpez Au Npefx Ak Uel

Condition: used, Year of construction: 1963, machine/vehicle number: 310417, 1 Color Sheet-Fed Offset Printing Machine Heidelberg KORD64Year 1963 - Serial-No. 310417 Size max. 400 x 570mm Speed max. 8.000sh/h Hsdoh U Dm Sopfx Ak Uofl Dampening System conventionel Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2024, color: other, empty load weight: 2 kg, fuel type: gasoline, gearing type: other, TITLE: NEW FLAT CONTAINER WITH REMOVABLE IRON PILLARS AND TWO TR5 SIDES PER SIDE AND 3-WAY BOOK-SHAPED IRON REAR SIDE, TIPPABLE UPWARDS AND TIPPABLE DOWNWARDS WITH A CRYSTAL BOTTOM AND 200 MM SUPPORT BEAMS WITH 2 DISAPPEARING INTERNAL ANCHORING HOOKS REF: 22-N-36 TYPE: flatbed with TR5 BM sides Hsdpfx Aksv Hib Ss Uofl NEW: yes LID: no OPENING: triple iron rear opening and 2+2 side OVERALL DIMENSIONS TOTAL EXTERNAL LENGTH: 6.00 m + 0.20 m of beam + 0.15 rear door with hinges EXTERNAL WIDTH OF THE BODY: 2.55 mt FRONT SIDE: 1.60 mt REAR SIDE: 1.00 mt in iron or 0.80 mt in iron SIDE SIDE: 0.60 mt MC: BOTTOM FROM: 5 mm smooth WALL FROM: / COLOR: greyThe prices shown do not include VAT. Please contact the sales representative for an updated comparison of prices and conditions. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the sector of the sale and purchase of industrial and commercial vehicles specialized mainly in the waste sector. Specialized in trucks, trailers and hook lift equipment. With a fleet of over 50 trucks and over 150 skips, containers with and without hook-lift cranes ready for delivery. S.E.&O Given the quantity of ads and details entered, Aurora invites you to verify the correctness of the data entered with the sales staff.

Condition: good (used), RICOH C Pro 7200 digital press, in good working condition. Color print count: 7,400,000, black print count: 2,900,000. Hjdpjz Atxpofx Ak Ujfl Video available upon request.

Year of construction: 2013, operating hours: 25,254 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: S40302, TOMRA AUTOSORT 4 optical sorting system equipped with VIS/NIR technology for the automatic separation of materials based on polymer and/or color. • Working width: 2,000 mm • Hour counter: 25,254 hours • Condition: operational until December 2025 • Current status: disassembled and available for inspection Hfsdpfx Akozbtvte Ujl The hour counter indicates 25,254 hours, although a significant portion of these corresponds to periods in standby mode, meaning the actual operating hours of the scanner are lower. Suitable for sorting plastics and other materials using VIS/NIR identification, enabling separation by polymer type and by color.

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: CON.07.10.0154, compressed air connection: 8 bar, input voltage: 230 V, total width: 1,329 mm, total length: 1,150 mm, total height: 1,725 mm, overall weight: 812 kg, pneumatic connection: 8 bar, Equipment: documentation/manual, 6-color pad printing machine from the manufacturer TAMPOPRINT, model Concentra 60-6 Max. printing area diameter (circle diameter) 55mm, total of 6 colors Year of manufacture 2010, weight 812 kg Air consumption 48 standard liters per cycle Good overall condition, machine fully functional, minimal air loss on one of the main valves. Visual condition as shown in the current photos. Scope of supply: TAMPOPRINT Concentra 60-6 as a stand model + Foot pedal + Hand crank for height adjustment of the tilting table + 6 used ink pots 60mm + 6 used printing rings (for the ink pots) Hjdpfx Akjzwv Rwe Uofl + 2 used mounting tables (for ink pot and cliché mounting) + 2 used gripper tongs (for ink pot and cliché mounting) + 2 used pad coupling devices plus mounting screws (4 pad coupling devices still need to be purchased) + 1 heavy-duty hook for transporting the machine + Documentation (operating manual, parts list, wiring diagram) Option 1 6 additional used ink pots 60mm, EUR 420,- excl. VAT. Option 2 4 pad coupling devices (new) from the manufacturer, EUR 1,098,- Packaging: The machine can only be packaged by wrapping it completely in cardboard and bubble wrap; it will not be placed on a pallet. The pad printing machine can be inspected and tested in Pottendorf by appointment. Delivery: Ex works Pottendorf (Austria). For collection, only trucks with a tail lift are permitted; please note the machine's weight. The transport of this machine is at the buyer's expense and risk. Packaging costs EUR 120,- Selling price EUR 18,200,- excl. VAT. New price approx. EUR 70,000,-

Condition: used, Year of construction: 2018, functionality: limited functionality, total length: 5,850 mm, total width: 1,730 mm, total height: 1,950 mm, For sale is a highly professional UV inkjet printer, the Durst Rho P10 200 Plus. This industrial hybrid machine combines the unsurpassed precision of 10-picoliter technology with the high productivity of a high-speed system. Ideal for print shops that need to switch flexibly between rigid sheet media and flexible roll materials. Technical highlights: Versatile hybrid system: Processes rigid media (Forex, Dibond, acrylic, wood) up to 40 mm thick, as well as flexible roll media up to a width of 205 cm. Outstanding print quality: The Durst Quadro Array 10 technology delivers a native resolution of up to 1,200 dpi with 10-pl droplets – perfect for small text and fine gradients. Maximum productivity: Depending on the configuration/mode, production speeds of up to 350 m²/h. Color gamut: Standard CMYK [Here, if applicable, add special colors such as white, light cyan, light magenta]. Year of manufacture: [2018] Hfsdpfoy Thc Hsx Ak Uol Condition: Technically and visually in good condition. The machine only ran in a single-shift operation and was consistently maintained. Availability: Available [immediately] or by arrangement. Location: [83410 Laufen D] Scope of delivery: Durst Rho P10 200 Plus base machine, infeed and outfeed tables for sheet printing [Optional: mention roll option / RIP software license / accessories]. Price: On request (plus VAT, ex works, self-collection/dismantling by the buyer). On-site inspection and print samples are available after prior appointment. More pictures or information on request.

Condition: used, Year of construction: 2018, functionality: fully functional, Standard configuration: Control and operation: • Control system: HEIDENHAIN TNC 640 - Handwheel: HEIDENHAIN HR510 - Swiveling control panel with two 19" monitors - 3 potentiometers (feed rate, rapid traverse, speed) - 3-color status indicator light - HEIDENHAIN DCM; collision monitoring between the machine and the tool Standard configuration: Machine: - Travel range, X-axis = 1,000 mm - Travel range, Y-axis = 1,100 mm - Travel range, Z-axis = 810 mm - NC rotary table 1,000 x 800 mm with T-slots 18H7 / 100 mm, driven by a pre-loaded worm gear drive - Swivel range 1,350 mm - Direct measuring systems on all axes, manufactured by HEIDENHAIN, connected to the pneumatic system - Micro-Epsilon "Spindle Growth System" for detecting and dynamically compensating for thermally induced spindle growth - Full enclosure with a large angled door for crane loading and a quick-access door - View windows in the working area made of laminated safety glass - Coolant nozzle - Oil collection pan made of chrome steel sheet - Leveling elements - Machine paint: Blue and light gray Milling head: - Automatic horizontal/vertical swiveling milling head as a full-fledged, stepless NC axis from -1° to +90° - Speed: 16,000 min-1 - Main drive: 38 kW (100% duty cycle) - Torque: 105 / 135 / 155 Nm (100% / 40% / 25% duty cycle) - Tool holder: HSK 63-A Coolant supply: - Internal coolant supply: 30 bar, Form A, paper band filter and high-performance filter with integrated chip extraction system - Milling head external cooling via nozzle ring Tool changer: - Rack magazine with 85 positions - 5-position tool loading station - Dialog-based operating panel Chip removal: - Scraper conveyor for chip removal at the front along the machine bed, chip discharge height 1,100 mm Documentation: - Acceptance test report for circularity test, laser inspection - Technical documentation in duplicate - CE declaration of conformity Milling head: Compressed air through the spindle center The compressed air can be selected via an M-function. Internal coolant supply with paper band filter: - Internal coolant supply with 80 bar (Form A) with 20 l/min, incl. paper band filter, coolant nozzle, and additional fine filter, particle size minimal 40 µm. Pressure regulation for each tool via tool table or a switch on the control panel during operation. Measuring probe and tool measurement: - Radio measuring probe BLUM TC60 incl. software adaptation, fully set up, Hsdpfxozzp Taj Ak Usfl incl. KinematicsOpt and calibration sphere on magnetic stand - TRS2 tool breakage detection system non-contact. Only suitable for tools with a solid core from 2 mm, e.g. drills, tapping drills. Additional machine options: - Oil and emulsion mist extraction Mechanical air filter 1,800 m3/h suction capacity - DXF converter - HEIDENHAIN AFC "Adaptive Feed Control" adaptive feed rate control - HEIDENHAIN ACC "Active Chatter Control" active chatter suppression

Condition: used, mileage: 212,134 km, power: 240 kW (326.31 HP), first registration: 08/2016, fuel type: diesel, empty load weight: 16,060 kg, maximum load weight: 9,640 kg, overall weight: 25,700 kg, axle configuration: 3 axles, fuel consumption (urban): 990 l/100km, color: other, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, total length: 9,900 mm, lifting height: 3,500 mm, Color: green, unladen weight: 16,060 kg, permissible total weight: 25,700 kg, tire size: 295/80 R22.5, 1st axle: , 2nd axle: , 3rd axle: , seats: fabric, interior color: gray, air suspension, refuse collection vehicle body: Geesinknorba, production: year of manufacture: 2016, serial number: 21500988, body type: GPM IV i 23h25, lifting device type: GHC, load capacity: 900 / 2500 kg, rated power: 21 kW. This is a non-binding offer; errors and prior sale are subject to change. The image may not correspond to the offer. Hfjdsz Awmwjpfx Ak Ujl

Condition: good (used), Year of construction: 2008, functionality: fully functional, Film coating machine Ryobimatic PCS-H remote control for color Technotrans alpha.d cooling system Coating unit with Baldwin IR dryer Grafix Digit. 3000 powder application unit Double sheet detection system, electric Slant sheet and side guide detection Semi-automatic plate changer All washing systems Strip feeder Non-stop delivery Hedpfx Aezqyr Eok Usfl Stenz envelope feeder Compressors

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 12790-T, total width: 1,400 mm, total length: 1,560 mm, total height: 1,100 mm, overall weight: 2,000 kg, input voltage: 400 V, input current: 32 A, type of input current: three-phase, input frequency: 50 Hz, operating pressure: 10 bar, space requirement length: 1,800 mm, space requirement height: 1,800 mm, space requirement width: 1,500 mm, coolant tank capacity: 800 l, The system was decommissioned one year ago due to a switch to a central system. One year before decommissioning, all TCF elements were replaced. In 2018, the filter elements in the sludge treatment system were upgraded to a more modern and process-reliable extraction system. Cooling was implemented via an on-site control system, including a chilled water unit. The cooling pump (oil side) is still present and installed. Should you require assistance with the design of the cooling system, we would be happy to support you. We can also assist with a restart on-site, if required. Technical data: - Total filter capacity approx. 210 l/min - Filter fineness approx. 3 μm nominal - Tank volume approx. 800 l - Designed for two hoppers WU305L/325L/105L including interface Equipment: - 3 filter groups, individually automatically backwashable, each with 2 TCF filter cartridges - 1 filter pump - 1 pneumatic unit - 1 automatic sludge treatment system consisting of a sedimentation tank and a scraper conveyor - Color RAL 7035 - 1 control cabinet, wired according to VDE standards, PLC control, operation and parameterization via touch panel 1 pcs. Variable speed machine supply pump for supplying the machines with filtered coolant as a submersible centrifugal pump Technical data: - Flow rate: approx. 200 l/min - Delivery pressure: approx. 10 bar - Drive: 7.5 kW, 400 V, 50 Hz with frequency inverter - Pressure sensor for constant coolant pressure, independent of the draw at the machine, included Hfsdpfszxn Nnox Ak Uol 2 pcs. Drive cooling pump as a submersible centrifugal pump Technical data: - Flow rate: approx. 30 l/min - Delivery pressure: approx. 10 bar - Drive: 400 V, 50 Hz 1 pcs. Cooling pump Brinckmann TA400/550 380 l/min 2m Drive 400 V, 50 Hz, 0.85 kW 2 pcs. Shut-off valve 5/4" NC for coolant supply lines closing against the media flow as a shut-off valve between the machine and the central supply line.

Condition: used, Year of construction: 1991, functionality: fully functional, Heidelberg MOZP (1991) – 2-Color Offset Printing Press with Perfecting (1/1 or 2/0) Hjdjzur E Sjpfx Ak Uofl Short Technical Description / Summary High-performance 2-color sheetfed offset press Heidelberg MOZP, year 1991. Features an integrated perfecting unit (P) allowing dual capability: printing 2/0 (two colors on one side) or 1/1 (one color on both sides in a single pass). Renowned for exceptional registration accuracy, high durability, and consistent print quality. Key Technical Specifications Manufacturer: Heidelberger Druckmaschinen AG Model: MOZP (P = Perfecting / Свртувач) Year of Manufacture: 1991 Serial Number (Masch. Nr.): 612 123 Country of Origin: Germany Number of Printing Units: 2 colors Max. Sheet Size: 480 x 650 mm (18.9" x 25.6") Min. Sheet Size: 140 x 185 mm Max. Printing Speed: Up to 10,000 sheets/hour Plate Size: 525 x 650 mm Weight: approx. 5,200 kg Features & Equipment CPC 1-01 / CPC Control Desk: Centralized remote ink and register control console. Perfecting Unit (1/1 or 2/0): Quick convertible unit for straight printing or perfecting options. Alcolor / Standard Dampening System: Continuous dampening system for fast ink-water balance. Powder Sprayer: Integrated anti-setoff powder spray device. Quick-action plate clamps for fast job changeover. Standard stream feeder and high-pile delivery. Condition & Availability Condition: Used, clean, visually very good, well-maintained in a professional printing environment.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 13341-T, total width: 1,420 mm, total length: 1,576 mm, total height: 1,100 mm, overall weight: 2,000 kg, cooling capacity: 20 kW (27.19 HP), input voltage: 400 V, input current: 32 A, type of input current: three-phase, input frequency: 50 Hz, operating pressure: 10 bar, space requirement length: 1,800 mm, space requirement height: 1,800 mm, space requirement width: 1,500 mm, coolant tank capacity: 800 l, Equipment: cooling unit, The system was taken out of service a year ago due to a switch to a centralized system. One year before decommissioning, all TCF elements were replaced. We can provide support for recommissioning. Technical data: - Total filter capacity approximately 210 l/min - Filter fineness approximately 3 μm nominal - Tank capacity approximately 800 l - Designed for two hoppers WU305L/325L/105L including interface Hsdpfx Akezxhcne Uofl Equipment: - 3 filter groups, individually automatically backwashable, each with 2 TCF filter columns - 1 filter pump - 1 pneumatic unit - 1 automatic sludge treatment system via a settling tank and scraper conveyor - In-line cooling via the return flow from the filter columns to the clean oil area via the plate heat exchanger, including flow control in the chilled water circuit - Color RAL 7035 - 1 control cabinet, wired according to VDE standards, PLC control, operation and parameterization via touch panel 2 pcs. machine supply pump for supplying the machine with filtered coolant as a submersible centrifugal pump Technical data: - Flow rate: approximately 100 l/min - Delivery pressure: approximately 10 bar - Drive: 400V, 50Hz 2 pcs. drive cooling pump as a submersible centrifugal pump Technical data: - Flow rate: approximately 30 l/min - Delivery pressure: approximately 6 bar - Drive: 400V, 50Hz 1 pcs. screwed plate heat exchanger with cooling control approximately 20kW Designed for cooling water 70 l/min, 13°C supply temperature.

Condition: used, mileage: 299,658 km, power: 120 kW (163.15 HP), first registration: 10/2017, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 11/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 1, total length: 6,961 mm, total width: 1,993 mm, total height: 2,612 mm, loading space volume: 14 m³, loading space length: 4,300 mm, loading space width: 1,780 mm, loading space height: 1,940 mm, Year of construction: 2017, Equipment: ABS, electronic stability program (ESP), navigation system, Mercedes-Benz Sprinter 316 CDI Box Van L3H2 | Long/High | Navigation | Seat Heating VIN: WDB9066351P538425 CHASSIS / COMPONENTS * 4x2 * Leaf spring suspension * Wheelbase: 4,325 mm * ABS BODY * Box van * Long/High – L3H2 * Wooden floor in the cargo area * Side paneling in the cargo area * Rear double doors * Tie-down points Cargo area dimensions approx.: * Length: 4,300 mm * Width: 1,780 mm * Height: 1,940 mm * Volume: approx. 14.0 m³ TIRES * 235/65 R16C 115/113R * Axle 1: Remaining tread approx. 90% * Axle 2: Remaining tread approx. 30% ENGINE / TRANSMISSION * 120 kW / 163 hp // 2,143 cm³ // Euro VI C * 6-speed manual transmission * Engine brake CABIN / DRIVER'S CAB * Navigation * Mercedes Audio 50 APS * CD radio * Heated driver's seat WEIGHTS * Permissible total weight: 3,500 kg * Unladen weight: 2,356-2,585 kg * Payload: 915-1,144 kg Hedsz Al R Depfx Ak Uefl OTHER * Color: White * Year of manufacture: 2017 * First registration: 10.10.2017 * Mileage: 299,658 km * MOT: 11/2027 * Tachograph test valid until: 12.11.2027 New MOT/technical inspection and weight adjustments (increase or decrease) are available upon request. We won't leave you alone even after the purchase: We will assist you in obtaining export or short-term license plates. We can also arrange for the transport of your vehicle within Germany. Just contact us – we will be happy to help! We speak German, English and Russian. All information is subject to change without notice. Changes, errors, printing and typographical errors, as well as prior sale are reserved. About us: Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. For many years, we have stood for experience, reliability and competence in the field of refurbishment and sale of commercial vehicles. Our strength lies in the purchase and sale of new and used commercial vehicles. On our approximately 11,000 m² site, you will find a wide selection of vehicles for a variety of applications. With us, it's not just about the vehicle, but also about the service behind it. Fairness, integrity and customer satisfaction are our top priorities. That's why we support you personally and reliably – from the first contact to the handover of your vehicle. Convince yourself. We look forward to your inquiry! Our service for you: Vehicle loading We will help you load your purchased vehicles. Special transport We will support you in organizing special transport. Export and short-term license plates We will assist you in obtaining export or short-term license plates. Customs formalities We will also support you with customs matters. Vehicle transport On request, we will arrange for the transport of your vehicle within Germany.