TOMRA AUTOSORT 4 – VIS/NIR 2000MM

Tomra AUTOSORT 4

Condition: new, Year of construction: 2026, load capacity: 3,500 kg, lifting height: 5,000 mm, free lift: 5,000 mm, load center: 500 mm, fuel type: diesel, mast type: triplex, construction height: 2,550 mm, motor manufacturer: Yunnei EUR5 2,7L, fork length: 2,000 mm, overall weight: 4,400 kg, empty load weight: 4,400 kg, total height: 2,550 mm, total width: 1,800 mm, color: blue, Equipment: CE marking, air conditioning, all wheel drive, cabin, fork extension, front guard, lighting, pallet forks, sideshift, trailer coupling, I have a 3.5T rough terrain forklift for sale with a permanent 4x4 drive. EUR5 Yunnei DEF20CAF4 Dieselmotor 55kW 75KM Air-conditioned cab The truck is equipped with: - Triplex mast, 5m lift height - Fork side shift - Fork positioner - Carriage width: 1500mm Cjdpfx Aiexa Anhsiori - 1220mm long forks - Additional 2000mm long forks included - Pneumatic tires, size: 20.5/70/16 Truck dimensions: 370cm long, 180cm wide, 255cm high Truck weight: 4400kg option to purchase a 1800mm wide hydraulic bucket as a direct importer, we provide access to spare parts !!! Forklift price: 19800 EUR EXW PayPal payment available

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Credpeua Tbwofx Aiioi Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: excellent (used), functionality: fully functional, Kiremko, Agrico Potato Peeling Line Comprises: - Kiremko Steam Peeler: With feed hopper: approx. 2400 x 3000 x 6000 mm Equipped with feed screw conveyor: length approx. 6000 mm - Agrico Two-Way Peeler: Equipped with screw conveyor - Double-Brush Machine (Type AT-OBC-2500): Working length: 2500 mm Equipped with screw conveyor - Discharge system and filtration: Discharge screw conveyor: length 2500 mm Collection tray / filtration unit with pump: approx. 1550 x 1070 x 1160 mm Codeyku Hropfx Aiisri Platforms are not included A complete, industrial-grade potato peeling line constructed entirely from stainless steel, designed for high-capacity processing. The system utilizes state-of-the-art Kiremko steam peeling technology, which, when combined with the two-way Agrico peeler and brush machine, ensures maximum raw material cleanliness with minimal product loss. An extensive system of screw conveyors guarantees fully automated material flow between processing stages. The line is equipped with its own filtration and water recovery system featuring a high-performance pump, enabling operational cost optimization.

Condition: used, Year of construction: 2023, No. 10017 Two-fraction star screen GÜNTHER MULTISTAR ONE / MS ONE Used, year of construction 2023 Approx. 200 operating hours Mobile star screen for screening waste wood, biomass, green waste and other screenable materials in 2-fractions as well as for overlength recycling - Input material: specific weight 200 - 650 kg/m³ / moisture max. 55% / piece size and individual weight max. 1000 mm and 20 kg / material feed with conveyor belt or wheel loader / throughput capacity up to 200 m³/h - Control, operation, switch cabinet: Type PLC / Operation display, control panel / Manual or automatic operating mode / Power supply AC 400 V, 3P, 50Hz via 32A plug on site - System interlinking: 16-pin plug connection / Cable (15 m) incl. winding device on base frame / Screen deck overrun for EMERGENCY STOP / Dummy plug in control cabinet door - Hydraulic support legs: 4 hydraulic support legs / Increase the discharge height of the useful fraction by 450 mm / All support legs can be controlled individually - Feed hopper: Capacity approx. 2.5 m³ / Feed height 2500 - 3000 mm / Free throw-in length 2300 mm / Conveying medium scraper chain conveyor with maintenance-free flat link chain / Drive 2.2 kW adjustable via frequency inverter - Collecting belt: Center distance 4600 mm / Belt width 1000 mm / Belt type smooth / motor 2.2 kW, v=1.2 m/s - Connect: Connect! is the innovative telematics solution from Komptech / overview of operating status, error messages, statistics, GPS localization, capacity utilization - Petrol-powered hydraulic pump - HyDrive System 2.0 MS ONE Crjdpfxswhy T Te Aiiji - Screen deck 60/90: Output: 0-60/90 and > 60/90 mm / Length 4500 mm / Width 1450 mm / Screen area 6.5 m² / Position 11° incline / Star shafts 17 pieces / Star diameter 340 mm / Star width 55 mm / Center distance 266.5 mm / Cleanstar cleaning elements / motor 2 x 4 kW / Adjustable via frequency inverter - Drive motors 50 Hz: motors for driving the screen deck / 2x 4 kW 50 Hz - Dosing roller: width 1560 mm / diameter 215 mm / drive 3 kW drum motor - FKAB with magnetic drum: Center distance 6200 mm / Belt width 1000 mm / Installation position 30° inclined / Belt type profiled, 15 mm chevron / 3.0 kW motor, v=2.2 m/s / Usable discharge height 3500 mm - 3950 mm / Multi-pole magnetic drum in permanent version / incl. discharge chute - Over-grain discharge conveyor: Center distance 6200 mm / Belt width 1000 mm / Installation position 30° inclined, 220° pivoting / Belt type profiled, 15 mm chevron / motor 3.0 kW, v=2.2 m/s / Usable discharge height 3600 mm - 4050 mm Transport dimensions approx. 8176 x 2466 x 2600 mm LWH Weight approx. 9200 kg Sale on behalf of customer, ex location near 85456 Wartenberg, without dismantling, transport and assembly Subject to errors in the description and price Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of manufacture and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “purchased as viewed” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Year of construction: 2020, condition: excellent (used), hopper with an integrated conveyor belt, featuring a metering screw at the front. Length: 9 meters, width: 2 meters. Crjdsilqfqopfx Aiiji

Condition: refurbished (used), Year of construction: 2012, operating hours: 7,340 h, Doppstadt DW 3060K Büffel - Year of manufacture: 2012 Codpfx Aeyhyuyeiijri - Operating hours: 7,340 - Engine: Mercedes Benz, 430 HP - Roller with 21 teeth - Crawler chassis - Remote control - Weight: 30,000 kg Machine is overhauled and immediately available.

Condition: new, sweeping width 2000 mm dimensions 2350 x 1450 x 1000 mm weight of the machine ca. 350 kg working width 2000 mm, dirt collection tray 300 ltr, Sweeper for forklift, wheel loader, Hoftrac, with leveling and front support wheel, PPN roller brush 520 mm diameter, splash guard, dirt collection tray with hydraulic emptying, mechanical tilting device, height-adjustable support wheels with metal rims, hydraulic drive, hoses and couplings. Crsdeulnbqjpfx Aiiei Extra storage on the hydraulic motor, Pockets W/H: 200x70 mm. Weight approx. 350 kg. - Made in Germany, powder-coated. Incl. side sweeper 600mm Ø with drive

Condition: refurbished (used), “SGM DIS 100” for Sale Manufacturer: SGM Magnetics Type: DIS 100 Belt widthness: 1.000 mm (New belt) Included: Csdpfx Ajy U N Exoiieri – New Control-unit Eddy Current Separator is overhauled, sandblasted and painted.

Year of construction: 2013, condition: used, functionality: fully functional, Tomra Halo 1500 (Titan 60") for sale. The machine is currently in use in a potatoe packhouse in Germany and will become available June/July 2026. Crsdpfx Aiox A Ebpsisi Prior delivery, the machine will undergo a service and througough cleaning in our workshop, including the replacement of broken fingers, infeed conveyor as well as the hedgehog band.

Condition: new, Year of construction: 2026, Extremely powerful industrial magnet for iron separation Special price: €990 net (shipping €14.90 net) *Construction lengths can be found in image 2 The active side is equipped with a stainless steel end plate (material 1.4301). Threaded holes are provided on the rear side for mounting; *handle available on request The block magnet systems can be used at temperatures of up to max. +100°C operating temperature. The magnet surface should be cleaned regularly from captured iron parts. Pickup distances for all types, for example: For a steel nut M5: approx. 60 mm Crjdpfx Astqfhxsiisi For an M5 x 30 screw: approx. 100 mm Mounting example 1: Mounted above a conveyor belt, 'iron parts jump onto the holding surface of the magnet.' Mounting example 2: Mounted within a pipeline system with direct contact to the material flow. For maximum separation safety, a cascade setup of multiple block magnets in series is possible. Assembly and safety instructions: When handling, already upon unpacking and later during installation, ensure that there are no loose iron parts, such as tools or screws, nearby. The magnetic force is so strong that painful injuries may occur if fingers get caught between iron parts and the active surface. There should be no steel parts under the active surface within a minimum distance of 400 mm.