Used Colomn Drill for sale (4,900)

Condition: good (used), Year of construction: 2004, Ref. -No.: 10604 Manufacturer: UNION Type: TC 110 Year of construction: 2004 Type of control: CNC Control: SINUMERIK 840 D Powerline Storage location: Halberstadt Country of origin: Germany X-Travel: 2000 mm Y-Travel: 1250 mm Z-Travel: 1000 mm W-Axis: 550 mm Table Height: 1050 mm Spindle Diameter: 110 mm Kodpfx Asx Sw Nmeh Njll Number of T-slots: 10 Max. Workpiece Weight: 6000 kg Clamping Area: 1250 mm T - groove width: 22 mm T - slot spacing: 125 mm Tool Taper: ISO 50 Max. Torque: 1639 Nm Feed Speeds X/Y/Z Axis: 6000 mm / min Rapid Traverse X-Axis: 15000 m / min Rapid Travel Y-Axis: 15000 m / min Rapid Traverse Z-Axis: 15000 m / min Feed Capacities X/Y/Z: 16000 x 16000 x 20000 N swivel angle: 360 °

Condition: good (used), Year of construction: 1989, Ref. -No.: 10600 Manufacturer: G.BREDA Type: R 55 2000 Year of construction: 1989 Storage location: Halberstadt Country of origin: Italy Machine-No.: 16XXXXX Spindle Taper: MK 5 Clamping Area: 1000 - 1700 mm Automatic feeds: 0,06 - 1,00 mm / rev Spindle Speed: 30 - 1200 RPM Drive Capacity - Spindle Motor: 400 V / 5,5 kW Ksdpfxjx Sw Nge Ah Nsll Bore Capacity In Steel (Diameter): 55 mm Weight Of The Machine Ca.: 4800 t Dimensions Of The Machine Ca.: 2,99 x 1,12 x 2,85 m Drill spindle stroke: 240 mm Drilling performance reaming: 80 mm Thread cutting: M 40 approx. Further information: - Reach min. / max. / 320 / 2005 mm - Column diameter 360 mm - Boom stroke 855 mm - Spindle - base plate approx. 1000 - 1700 mm - E - Central clamping - Cube table - Hydraulic vice - Coolant device The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 1992, Ref. -No.: 10578 Manufacturer: UNION Type: BFT 130 NC Year of construction: 1992 Type of control: CNC Control: Heidenhain 430 Storage location: Halberstadt Country of origin: Germany X-Travel: 2000 mm Y-Travel: 1600 mm Z-Travel: 1600 mm W-Axis: 600 mm Spindle Diameter: 130 mm W-Travel (Boring Spindle): 900 mm Table Load: 8000 kg Clamping Area: 1800 x 2000 mm T - groove width: 28 mm T - slot spacing: 160 mm Tool Taper: ISO 50 Spindle Turning Speed - Stepless: 1000 RPM Klsdpfx Aox Sw Ipsh Nol Spindle Speed: 10 - 2000 RPM Max. Torque On The Boring Spindle: 3150 Nm Rapid Traverse X-Axis: 2500 m / min Rapid Traverse Z-Axis: 2500 m / min Drive Capacity - Spindle Motor: 15 - 30 kW Borehole Diameter: 800 mm W-axis feed: 2500 mm / min Y-axis feed: 2500 mm / min Table size: 2000 x 1600 mm Rapid adjustments W-axis: 3150 mm/min. Rapid adjustment Y-axis: 5000 mm / min Cross slide movement: 320 mm Torque max. face support: 5300 Nm Tarpaulin diameter max.: 1400 mm Machine length: 6000 mm Machine width: 4000 mm Machine Height: 4000 mm Weight Of The Machine Ca.: 40 t Further information: The machine can be viewed under power by arrangement.

Condition: new, Year of construction: 2024, NEW FLOTT SB 25 plus pillar drill - Thread cutting device - Control panel with OLED display - LED lighting - Quickly adjustable and ergonomic drilling depth stop - Stepless speed control via central rotary knob - Thermal overload protection - Spindle stop - Drilling protection with electrical fuse - Continuous/normal drilling capacity (mm): 23/25 - Thread cutting capacity (depending on pitch): M16x1 - Spindle: MK III - Drilling depth (mm): 115 - Projection (mm): 260 - Usable work surface (W x L) (mm): 420 x 340 - Table height adjustment with rack - Spindle speeds continuously variable (1/min): 20 – 2000 - Dimensions (mm): 430 x 715 x 1800 For further TECHNICAL DATA, please refer to the product sheet! Kedpfx Ahef S Tfns Nell OPTION drilling package 4 (296593) - € 595.00 - Vice [felix] 2.0 120 - Keyless drill chuck B18 3-16 mm (accuracy 0.17 mm) - Taper mandrel B18/MK III - Reducing sleeve MK III/MK II - Reducing sleeve MK III/MK I 3 year guarantee for single-shift operation Delivery: free of charge including packaging (Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, Year of construction: 2026, Spindle speed electronically variable, 40-4000 rpm Spindle: MT2 Kledpfxeig H Rdo Ah Nsl Table height adjustment via rack and pinion Maximum tapping capacity: M12 Setting of tapping depth via digital depth indicator digital speed display digital drilling depth display Drilling depth stop via stop ring Feed: manual Table height adjustment via rack and pinion Continuous/standard drilling capacity in steel: Ø 15 mm / 18 mm Drilling depth: 70 mm Throat (distance from spindle to column): 220 mm Column diameter: 70 mm Usable table area (W x L): 300 x 250 mm Machine dimensions (W x D x H): 420 x 520 x 850 mm Weight: 65 kg Max. distance spindle/table/base: 300 / 370 / 420 mm Motor: single-phase AC, controlled by frequency inverter, 230 V, 0.54 kW OPTIONAL Drill Package 2 (No. 296591) - Felix 80 vice - Quick-action drill chuck B16 1-13 mm - Morse taper arbor B16 / MT2 - Reducing sleeve MT2 / MT1 Price: €315 Factory warranty: 3 years Delivery free of charge including packaging (within Germany only) NOT THE RIGHT MACHINE? WE ARE AN AUTHORIZED FLOTT SERVICE PARTNER AND CAN OFFER YOU ANY PRODUCT FROM THE FLOTT RANGE! ASK US FOR AN OFFER!

Condition: used, machine/vehicle number: 008198, X axis working area: 4200 mm Y axis working area: 1400 mm Working Table: Pod and Rail Kledex A Hbkopfx Ah Njl Main Electrospindle power: 18.5 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 35 Total number of tool changer positions: 26

Condition: excellent (used), functionality: fully functional, Grindable diameter from 2 to 40 mm. Kledpfxex U Eddj Ah Nol Smallest and largest point angle: 40 – 180°. For right- and left-cutting tools, 1-12 cutting edges. Suitable for sharpening twist drills, step drills, and taps. Accessories and an operating manual are included.

Condition: good (used), Description: Robust industrial pillar drill manufactured in the Soviet Union. The STANKO 2H118-1 is designed for workshop use and is suitable for drilling, boring, countersinking, as well as basic thread cutting operations. Exceptionally heavy-duty construction, mechanical gearbox, and long-lasting design. Technical Data (typical version) - Drilling capacity in steel: approx. 23 mm - Spindle taper: Morse taper MT2 - Spindle speeds: 9 steps - Speed range: approx. 90 – 1,400 rpm - Feed: manual Klsdpfsx U Agcox Ah Nel - Feed stages: mechanical selection - Motor power: approx. 1.5 – 2.2 kW - Connection: 380–400 V / 50 Hz - Clockwise/Counterclockwise rotation: yes - Spindle brake: mechanical - Depth stop: available - Machine weight: approx. 400 – 500 kg (estimated) - Space requirement: approx. 700 × 800 × 2,100 mm Equipment: - Mechanical gearbox - Solid machine table - Depth stop with scale - Tool ejector - Main switch Condition: The machine is used and shows age-appropriate signs of use. Functionality checked. Visual signs of wear are present, technically solid.

Condition: excellent (used), functionality: fully functional, power: 125 kW (169.95 HP), emission class: euro5, Year of construction: 2019, operating hours: 4,500 h, Conrad Boxer 200 drilling rig with desanding unit Advanced wash drilling system, ideal for clay soils and geothermal applications. Includes 150 meters of drill pipes. The machine is equipped with a custom sand separation unit that efficiently separates clay and water, optimizing the drilling process. Hydraulically driven crawler chassis with rubber-vulcanised track shoes, track width 400 mm. Self-supporting welded steel subframe with stabilizing cylinders. Iveco NEF 45 ENT diesel engine, approx. 125 kW. Fully equipped hydraulic system with stainless steel reservoir. Modem installation for remote diagnostics. Radio remote control for travel and drilling functions. Fixed control panel with lockable enclosure. Hydraulically folding mast for 4 m drill rods. Mast translation system with 400 mm stroke. Vertical hydraulic feed system. Drill carriage and guide rail system. 4-inch hydraulic drill head Conrad T-4-5-600. Hydraulic tilting system. Weight compensator for drill rod protection. Hose and cable management system. Hydraulic top clamp. Hydraulic flushing pump. Prepared for displacement pump installation. Hydraulic piston pump. 3-inch water circuit with flow meter. Flow control valve. Kledpfex Uyukjx Ah Nsl Hydraulic breakout clamp. Drill rod storage cassette. Pipe handling manipulator. Automatic lubrication system.

Condition: reconditioned (used), Year of construction: 1988, functionality: fully functional, This 2A576 radial drilling machine has been completely overhauled and restored to full producbon capacity. Basic technical data: Drilling diameter: in steel 80 mm / in cast iron 100 mm Headstock travel along the arm: 2000 mm Max drilling radius: 2500 mm Spindle travel: 500 mm Spindle: ISO50 Stepless sefng of spindle feed rates Spindle speed range: 2-1600 rpm. Column diameter: 500 mm Ksdpfxour H I Nj Ah Nsll Main drive engine power: 7.5 kW Dimensions L/W/H: 4180/1280/4125 mm Weight: 12 tons This drilling machine meets the minimum safety and health requirements set out in Direcbve 2009/104/EC, known as the "Tools Directive". Machine ready for checking under power in our warehouse in central Poland.

Condition: new, Year of construction: 2026, NEW FLOTT SB 13 plus Pillar Drilling Machine - Spindle: B 16 (MK II additional charge €160 / Article no. 212504) - Tapping device - Control panel with OLED display - LED lighting - Rapidly adjustable and ergonomic drilling depth stop - Infinitely variable speed control via central rotary knob - Thermal overload protection - Spindle stop - Drill guard with electrical interlock - Continuous/normal drilling capacity (mm): 13/15 in E335/ST60 - Tapping capacity (depending on pitch): M10 - Drilling depth (mm): 60 - Throat depth (mm): 220 - Usable work surface (W x L) (mm): 300 x 250 - Rack-and-pinion table height adjustment - Infinitely variable spindle speeds (rpm): 40 – 4000 - Dimensions (mm): 420 x 540 x 1780 For more TECHNICAL DATA, please refer to the product sheet! OPTION Drill Package 2 (296591) - €300.00 - [felix] 2.0 80 bench vice - Quick-action drill chuck B16 1-13 mm (accuracy 0.17 mm) - Taper arbor B16/MK II - Reducing sleeve MK II/MK I Kljdpfsxrdrxox Ah Nel 3-year warranty for single-shift operation NOT THE RIGHT MACHINE? WE ARE AN OFFICIAL FLOTT PARTNER AND CAN OFFER YOU ANY PRODUCT FROM THE FLOTT RANGE! REQUEST A QUOTE!

Condition: excellent (used), CATALOG NUMBER 6608 TECHNICAL DATA - Number of spindles: 21 pcs - Distance between outermost spindles: 640 mm - Spindle pitch: 32 mm - Max drilling depth: 60 mm - Vertical drilling width: 60 mm - Adjustable drilling (up/down and at an angle) - Right/left drill bits, mounted with hex screws - Pneumatic clamps: 2 pcs - Table surface dimensions: 490x1040 mm - Height to table surface: 920 mm - Main motor: 2.2 kW - Operating pressure: 6-8 bar - Dimensions (L/W/H): 2830/1150/1320 mm - Weight: 442 kg - German manufacture - Original DTR documentation Kljdpfx Ajx Sq Amjh Njl - Unpainted - Mobile Net price: 7,900 PLN Net price: 1,880 EUR (based on a rate of 4.2 EUR) (Prices may vary in case of significant fluctuations)

Condition: new, functionality: fully functional, Drilling capacity in St 60: 40 mm Tapping capacity in St 60: M 24 Tapping capacity in GG 20: M 30 Spindle speeds - stepless: 160-2250 rpm Short taper spindle: MT 3 Spindle stroke: 120 mm Throat: 293 mm Column diameter: 115 mm Machine table - usable surface: 515x360 mm Distance spindle/table min./max.: 117/701 mm T-slots number - width - spacing: 2 x 14 x 224 mm Feed: 0.1 + 0.2 mm/rev Machine height: 1840 mm Standard equipment: - Main switch with lockable motor protection circuit breaker - Mushroom-head emergency stop button (latching) - Infinitely variable speed adjustment - Digital speed display - Feed overload protection - Protection class IP 54 - Terminal block in control cabinet (no connecting cable) - Spindle guard with electrical interlock Optional equipment: Pos. 12 LED machine light with radially adjustable light beam, connection rating 230 V, protection class IP65 Pos. 20.1 Thread cutting device with foot switch, for tapping with end-stop, max. 6 threads/min. (thread cutting capacity depends on spindle speed) Pos. 25 Coolant system B, consisting of: separate tank (33 l), pump with motor protection circuit breaker, complete fittings Pos. 37.1 Klsdpex Sq A Tsfx Ah Nol Digital drilling depth indicator Zero point setting (drilling start), 5-digit LED display, character height 13 mm

Condition: new, functionality: fully functional, Drilling capacity in steel St 60: 25 mm Drilling capacity in cast iron GG 20: 30 mm Boring capacity in St 60: 30 mm Thread cutting in ST 60: M 16 Thread cutting in GG 20: M 20 Short spindle: MK 3 Spindle stroke: 140 mm Throat: 293 mm Column diameter: 115 mm Machine table – usable surface: 514 x 360 mm T-slot quantity – width – spacing: 2 x 14 x 224 mm Distance spindle-table min./max.: 132 / 724 mm Feed: manual Spindle speeds – stepless: 100 – 1,800 rpm Total power requirement: 1.0/1.6 kW Machine weight approx.: 260 kg Standard equipment: - Mushroom pushbutton (latching) for emergency stop - Reversing switch for clockwise and counterclockwise rotation - Motor protection switch - Stepless speed adjustment Kledpfx Ahox Sqt Ss Njl - Digital speed display - Protection class IP 54 - Plug connector (pre-installed) - Spindle guard with electrical interlock - Paint finish: DD textured varnish signal white RAL 9003, Pantone 7545c, black Special equipment: Pos. 12 LED machine lamp with radially adjustable light beam, connection power 230 V, protection class IP65

Condition: new, functionality: fully functional, Drilling capacity in St 60 40 mm Kljdpeifkpwsfx Ah Nsl Thread cutting in St 60 M 24 Thread cutting in GG 20 M 30 Short spindle MK 3 drilling stroke 120 mm throat 293 mm column diameter 115 mm machine table - usable support 514x360 mm T-slots number - width - distance 2 x 14 x 224 mm distance spindle-machine table min./max. 117/701 mm feed rate 0,10 + 0,20 mm/rev. spindle speeds 160-2,250 rpm Total power requirement 1.45/1.9 kW machine height 1840 mm Machine weight approx. 285 kg Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right/left rotation - motor protection switch - Speed adjustment stepless - digital speed display - feed overload protection - protection class IP 54 - Connector plug (ready mounted, cable length 2 m) - Spindle protection with electrical fuse

Condition: good (used), Paper drilling machine Hang 106DTK4, machine number 62407, in a good condition, immediately available Kedpfoihpkhsx Ah Njll

Condition: good (used), Paper drilling machine Nagel Citoborma 490, machine number 41648, 4 drilling heads, functional, in good condition, immediately available Kljdsvr U Rvspfx Ah Nsl If you are interested, we would be happy to inform you about other machines in our company. You are welcome to view the machine in our company by prior appointment.

Condition: new, Special offer price incl. shipping within DE (without islands) While stocks last Technical data: Drill diameter: 3 - 13 mm point angle: 90° - 140 Speed: 4800 1/min Connection: 230 V Motor power: 0,18 kW weight, approx.: 8,1 kg Dimensions, approx.: 320 x 180 x 190 cm Features: - Ideal for grinding HSS/hard metal twist drills. - Safe operation due to force-guided grinding process - Point angle adjustable from 90° - 140 Kodjd R A Dcopfx Ah Nell - Compact design, with collet storage in the machine and handle for quick stowage - Including pointing device to reduce the feed force - Device for relief grinding of drill cutting edges to reduce friction between drill and workpiece - Rotor with precision ball bearing Scope of delivery: - Grinding wheel CBN - 11 collets ER 20, 3 - 13 mm - Collet holder ER 20

Condition: excellent (used), Four-head paper drill. Several pieces available !!! Brand Hang Model 106DTK4 Details 4-head paper drilling machine With adjustable drilling heads Operation Electric foot switch, 2 speeds Available directly This additional information is standard for this model. Always check the details carefully during your visit. Klodpfx Ahjudl Iks Nol The 1975 Hang 100DTK4 printing machine is an iconic and reliable piece of equipment that has made a significant impact on the printing industry. Manufactured by Hang, the machine offers advanced features for its time and set the standard for high quality and efficient printing. The Hang 100DTK4 features a robust and durable design, ensuring stability and consistent performance during the printing process. Its printing technology, although conventional by today's standards, allowed for precise and sharp prints with satisfactory resolution for its era. Equipped with user-friendly controls and mechanical automation, the machine offered programmable settings for various printing formats and configurations. Its operation required skilled operators who were able to achieve accurate and repeatable printing results. The printing machine's capabilities extended to a variety of substrates, including paper, paperboard and lightweight cardboard, satisfying a range of printing applications common at the time. Launched in 1975, the Hang 100DTK4 presented a technological advance for its era. Its sustained performance and contribution to the printing industry are remarkable. While newer printing machines with advanced digital technology have emerged, the Hang 100DTK4 remains a historic symbol of performance and innovation in the printing industry in the 1970s. The machine has collector's value and serves as a testament to the evolution of printing technology over the decades.

Condition: good (used), Year of construction: 2007, functionality: fully functional, drilling depth: 1,150 mm, overall weight: 12,000 kg, drill diameter: 32 mm, Heidenhain iTNC530 cnc control 12-fold tool changer Technische Daten / technical details: Wege: / travels: X-Achse längs (Tisch) / X-axis longitudinal (table) 1800 mm Z-Achse quer (Ständer) / Z-axis cross (column) 1700 mm W-Achse quer (Bohreinheit) / W-axis cross (drilling unit) 1150 mm Y-Achse senkrecht (Bohreinheit) / Y-axis vertical (drilling unit) 1200 mm Klsdpewcldasfx Ah Nol B-Achse (Rundtisch) / B-axis (rotary table) 360 ° A-Achse (Bohreinheit) / A-axis (drilling unit) -25 - +15 ° Bohrbereich-Tiefbohren (ELB): / drilling area-deep drilling (ELB): Durchmesserbereich / diameter range 6-32 mm max. mögliche Bohrtiefe / max. drilling depth 1150 mm Antriebsleistung / drive capacity 40 kW Gewicht der Maschine ca. / weight ca. 12000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. For more technical details please look at the photos

Condition: new, The R 32 Basic is a robust radial drilling machine ideal for those entering the world of Radial Drilling Machines, offering an exceptional drilling capacity of 32 mm (1.26 in) and a throat depth ranging from 320 to 820 mm. This model, part of the renowned R Basic series, features manually switched gears and manual clamps, ensuring ease of use while maintaining a stable and reliable performance suitable for various applications, including workshops and steel construction. Built from high-quality fine-grain cast iron with heavy ribbing, the machine minimizes vibrations, enhancing operational precision with its precision-ground gears. It includes a standard cube table for handling smaller workpieces, making the R 32 Basic a powerful addition to your workshop. Equipped with features such as motorized arm height adjustment and mechanical clamping for important components, this radial drilling machine is designed for your operational needs. Buy now to experience the efficiency of the R 32 Basic, a standout in the Radial Drilling Machines product group. Kljdpfx Aeu E Hzkoh Njl

Condition: new, The R 40 V is a powerful radial drilling machine from KNUTH, part of our renowned Radial Drilling Machines category. This precision tool excels at drilling, reaming, and countersinking in steel or cast iron, making it ideal for various industrial applications. With a robust and versatile design, the R 40 V features a premium, high-quality cast base and column, alongside a torsion-resistant boom that allows easy handling of large workpieces. It boasts a 40 mm drilling capacity and a large throat depth of 300 to 1,300 mm, ensuring high accuracy and efficiency even in demanding environments. The machine is equipped with an infinitely variable spindle speed control and a powerful coolant system, facilitating smooth operation and minimizing wear. Operators will appreciate the user-friendly controls and the modern design that enhances comfort. Trust the R 40 V for reliable performance in your production needs. To learn more or request a quote, explore our Radial Drilling Machines product group today. Kljdjqc S Ivjpfx Ah Nsl

Condition: used, functionality: fully functional, Manufacturer: MAS-KOVOSVIT Machine type: Radial drilling machine Kodpfx Aox Uqcfeh Njll Condition: used, good technical condition, ready for operation Technical specifications: • Drilling capacity in steel: 80 mm • Drilling capacity in cast iron: 110 mm • Arm length: 4,000 mm • Vertical arm travel: 1,600 mm • Horizontal head travel: 3,470 mm • Spindle taper: Morse 6 • Spindle diameter: 65 mm • Spindle stroke: 475 mm • Spindle speed: 9–1,400 rpm • Feed rate: 0.035–2.8 mm/rev • Distance spindle nose to table: 710–2,785 mm • Max. workpiece height: 2,785 mm • Drilling diameter range: 80–300 mm • Swing range: 0°–360° • Total power: 13.8 kW • Weight: approx. 19.5 t • Overall dimensions (L×W×H): 6,010 × 1,800 × 5,205 mm Equipment: • 2 worktables Location: Machine in stock in central Poland. Further information available upon request.

Condition: new, Year of construction: 2026, functionality: fully functional, Edge banding machine – NB860EC - Machine with 6 edge band magazines and servo feed • Robust machine structure and most of the machine's mechanical parts are machined with advanced CNC machines for greater stability and longer life without deformation; • Combines multiple functions in one machine, including pre-milling, pre-heating, pre-melting, end trimming, servo fine cutting, servo scraping, surface scraping and polishing, spraying, all in one process. • Intelligent PC control, feed guide, belt pressing rollers, fine cutting and scraping are controlled by a servo motor. Corner rounding is adjusted pneumatically. Machine speed 16/20/24 m/min; • Nesting kit design • Fine refilling and corner rounding via HSK25 TECHNICAL DATA Panel length: ≥120 mm; ≥200 mm with rounded corners Panel width: ≥60 mm Min. Panel size: 120× 120mm; 120× 60mm long edge; 200*80 mm short edge Panel thickness: 9-60 mm Thickness C=edge: 0.4-3 mm Feed speed: 16/20/24 m/min Power supply: 380 V; 50 Hz Required air pressure: 0.7 MPa Distance between panels ≥50 Console 2 Dust collection outlet Φ 125 mm*5 Total power: 28 Kw Approximate weight: 3,000 kg Overall dimensions: 5,930*1,050*1,850 mm 6-sided drilling CNC and double workstation ND712DTL The ND712D is designed to have 2 independent workstations of 1200+650 mm, integrating 2 machines into one, thus doubling efficiency with less space required. The integrated, high-rigidity machine body structure gives the entire machine a longer service life and fast, stable machining. The optimized drill layout makes drilling more efficient. TECHNICAL DATA Total power: 52.36 kW Machine size: 7400 * 4,620 * 2,650 mm Power supply: 380V/50Hz 3 phases Air supply: 0.6-0.7MPa Total weight: 7,850 kg Control system: SYNTEC Panel size: Length: 250-2,800 mm / Width: 250-650/1200 mm / Thickness 10-60 mm Maximum travel speed: ( X) Axis /U ) - 135 m/min Y axis - 75 m/min Z axis - 30 m/min Kledpfx Aox Uplxoh Nsl Transmission mode X axis - Rack and pinion Y axis - Rack and pinion Z axis - Ball screw Drilling blocks: Top 2+2; Bottom 1+1 Vertical drills (top): 19*4 Horizontal drills (top): X: 3 × 8 + Y: 2 × 8 Vertical drills (bottom): 9 × 2 Maximum drilling diameter: Φ35mm Distance between holes: 32 mm Rotation speed: 5000 rpm Shank diameter: Φ10mm Main shaft: 4* ER25 Power: 2*3.5kw; 2*5.5kw max. 18000rpm

Condition: new, Control unit for BT-2 / BT-12 drilling machines Kjdpocwgaujfx Ah Njll Other spare parts for these machines available on request!