Used Collet Chuck for sale (4,252)

Condition: good (used), Year of construction: 2006, functionality: fully functional, overall weight: 70 kg, chuck outer diameter: 315 mm, three-jaw chuck diameter: 315 mm, total height: 245 mm, short taper mount: 8 mm, outer diameter: 315 mm, cone diameter: 140 mm, through hole: 104 mm, jaw width: 26 mm, construction height: 152 mm, rotational speed (max.): 4,200 rpm, bar passage: 104 mm, Well-maintained Schunk 3-jaw power chuck ROTA THW plus 315-104 with quick-change jaws, KK8 chuck flange, and connection for hydraulically actuated standard stroke cylinder for sale. Suitable for machine spindle DIN 55026-AB and compatible with Schunk jaws GBK 250 and UVB 250. Additional technical information is available in the attached PDF. Since we can no longer use this chuck on our new turning-milling machine, it is being sold. The new price of the chuck is over 12,000 euros. Predpfjxycx Hjx Adned

Condition: good (used), Four-jaw chuck, 4-jaw chuck Prsdpfxodtap Ij Adnsd -Mouth size: Ø 200 mm -Passage: Ø 57 mm -Thread: Ø152 / Pitch 4mm -Weight: 19 kg

Condition: new, functionality: fully functional, overall weight: 8 kg, chuck outer diameter: 500 mm, three-jaw chuck diameter: 400 mm, jaw width: 45 mm, construction height: 57 mm, SFG, 400 as-new base jaws "helical geared" for SCHUNK, FORKARDT three-jaw chucks, approx. 500 mm size. Other base or clamping jaws available on request. Photo No.: 404-400. Supplied with M16 x 1.5 mm screws. Manufacturer: SCHUNK. Condition: NEW. The listed price is net. Gross price: €416.50 plus shipping. Weight approx. 7.5 kg/set. Additional jaws available on request. Shipping within Germany at buyer's expense. For international shipping, please enquire. Prjdpexx U Nhefx Adnjd ---- Technical Data: Width B: 45 mm Length L: 160 mm Height H: 57 mm Cross groove N: 30 mm Bar S: 18 mm Hole spacing: L: 60 mm With/without screws: M16 x 1.5 Original price: over €550.00

Condition: good (used), Internal item No.: 18054 HSK-A50 Shrinking Chuck 50 PCs. Manufacturer: E.g. Haimer / FH / SK Schüssler-Gewefa Type: including 6 x 80 / 8 x 80 / 16 x 95 / 12 x 90 / 10 x 85 / 6 x 120 Differential taxation according to § 25a Ust.Ges. There are other, different holders in stock. About 700Stk. Prsdjdxpucepfx Adnjd

Condition: used, diameter 315 mm 3-jaws chuck without jaws. Psdpfxou Sbiie Adnjrd

Condition: used, diameter 200 mm height 150 mm hollow 55 mm weight of the machine ca. 30 Kg Podexwzd Aepfx Adnerd dimensions 0,2 x 0,2 x 0,2 m 3-jaw chuck with 1 sets of drill jaws Short taper mount size 6 (131,4mm bolt circle) Bayonet lock Chuck wrench

Condition: used, As-new CNC chuck lathe TAIKAN model HPT 08-380 Serial No. 2015122 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Maximum turning length without chuck: 350 mm Pjdpfxowz Rifs Adnerd Maximum turning length with chuck: approx. 300 mm Turning diameter (nominal): 250 mm Swing diameter over bed: 500 mm Travel of Z-axis: 385 mm Travel of X-axis: 200 mm Feed rate (X + Z): 1–8000 mm/sec. Rapid traverse (X): 30,000 mm/sec. Rapid traverse (Z): 36,000 mm/sec. Spindle speed, max.: 4500 rpm Spindle bore: 66 mm Draw tube bore: 50 mm Spindle nose: presumably A2-6 Workpiece weight incl. chuck: max. 200 kg Spindle drive motor power: 11 kW Power supply: 400 Volt, 50 Hz - Electronic handwheel - USB, LAN data interface + CF card - Drum turret with 12 tool stations - Hydraulic 3-jaw power chuck, Ø 215 mm - Infinitely variable spindle speed - Coolant unit - Chip conveyor with rear discharge + basic chip cart Machine footprint with chip conveyor: Length 2200 mm x Depth 2750 mm x Height 1700 mm Machine space requirement: Length 2200 mm x Depth 1750 mm x Height 1700 mm Chip conveyor dimensions: Length 2700 mm x Width 600 mm x Height 1400 mm Weight: 3.5 t Very good condition – as new Machine comes from a showroom and has only a few operating hours.

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck -Manufacturer: Röhm, three-jaw chuck, chuck size Ø 160 mm -Passage: Ø 42 mm -Hole circle: Ø 133 mm Prjdpfjqlgvhox Adnod -Receptacle: Short cone 6 / cone 103 - 105 mm -Weight: 10.5 kg

Condition: new, Year of construction: 2017, Kitakawa orginal 5 inch 3 jaw Large hole power chuck A2-8 direct spindle connection condition new, never use. in stock Pedpfx Ajm E Imzsdnord include 3 soft jaws for spindle A2-8 new price 11.000

Condition: good (used), functionality: fully functional, used (as new) 3-jaw chuck RÖHM D = 160 mm Mount MK 4 and 3-jaw chuck FORKARDT D = 160 mm Prodpfx Adjxwkczsnod Mount MK 5

Condition: used, diameter 200-400 mm different adapting flanges available. Price per pc. Podpfx Aeu Sbgbsdnsrd

Condition: used, diameter 500 mm height 250 mm hollow 150 mm weight of the machine ca. 0,2 t dimensions 0,5 x 0,5 x 0,3 m Predpfxjxwzcro Adned 3-jaw chuck with 2 sets of drill jaws Short taper mount size 11 (235mm bolt circle) Bayonet lock Chuck wrench

Condition: used, Automatic lathe, turning machine with copy attachment UMA Type F1 NK 60 Predpfoib D H Rox Adnod Copy lathe for chuck parts Machine no. 28-0031 Year of manufacture: 1971 Maximum turning diameter: 150 mm Swing diameter over bed: 400 mm Turning length: approx. 200 mm Spindle bore in machine spindle: approx. 42 mm Spindle speeds: 580 / 930 / 1480 / 2380 rpm, 4 steps Main motor power: 5.5 kW Electrical connection: 380 Volt, 50 Hz - Spindle flange for chuck mounting, short taper 55021, size 6, flange outer diameter Ø 180 mm - Spindle speed via 4 gearbox steps - Hydraulic clamping device with expanding mandrel, without spindle bore, clamping diameter Ø 15 mm - Right side with copying slide, copying unit SAUTER Type KMCA 61, with hydraulic feed movement - Left side with cross slide with hydraulic feed movement - Coolant system mounted below the machine bed - Hydraulic unit positioned behind the machine - Operating manual, electrical diagram, hydraulic diagram Space requirement automatic lathe with hydraulic unit (L x W x H): 2900 x 1900 x 1700 mm Space requirement automatic lathe (L x W x H): 2400 x 1900 x 1500 mm Space requirement hydraulic unit (L x W x H): 1400 x 850 x 1700 mm Weight automatic lathe: 2400 kg Weight hydraulic unit: 400 kg Total weight with pallet: 3000 kg In good condition

Condition: new, functionality: fully functional, number of clamping sleeves: 1, clamping range: 30 mm, Collets / Collet Caps / Support Sleeve for Collet System new - unused 5 pcs collet caps for collet size Ø30, item no. 314567.00 4 pcs collets size Ø 30.0 1 pc support sleeve for collet size Ø30 - for Reishauer RZ 301 / RZ 362 from our stock Pjdswccp Hjpfx Adnjrd Price / details on request All technical information subject to errors and omissions. We sell exclusively to countries within the European Community.

Condition: like new (used), functionality: fully functional, machine/vehicle number: 115090324, KITAGAWA POWER CHUCK e.g. OKUMA, MAZAK, MORI Three-jaw chuck with serration. cylindrical holder for spindle flange Spindle mounting flange in scope of delivery KK6 Drawtube connection thread M60x2,0mm currently under investigation Jaw interface: 1.5 x 60 ° Prjdpfxei Hqhqj Adnod Weight without clamping jaws approx. 30 kg For further inquiries, we are at your disposal. Shipping costs on request

Condition: used, Rubo H ½" Rubo H ¾" Rubo H 1" Rubo H 1 1/4" Rubometric GR 3 ½" Rubometric GR 4 ¾" Predpfx Adoxvtu Ronod

Condition: ready for operation (used), - 500mm faceplate by Bison - good condition Pedpfx Adexvmmmjnord - individually adjustable jaws - mounting size 8 - 125mm bore - 4x T-slot

Condition: good (used), Thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment -Tapping chuck: MK2 mount Pjdexrmp Tepfx Adnord -Cutting performance: -Bore: Ø 10 mm -Dimensions: Ø 55 x 200 mm -Weight: 1.4 kg

Condition: excellent (used), functionality: fully functional, We are offering a used EROWA UPC chuck here. ER-016841. The UPS chuck is in very good condition and fully functional. Viewing possible by appointment Pedpfxjxqnqve Adnsrd Shipping and viewing possible!

Condition: excellent (used), functionality: fully functional, three-jaw chuck diameter: 160 mm, Three-jaw chuck eccentric – clamping chuck 1 piece used, very well-preserved Horvath Fischer eccentric clamping chuck (three-jaw chuck) with a diameter of 160 mm, maximum adjustable eccentricity: 25 mm, chuck mounting cylindrical diameter 150 mm, supplied with chuck key and a set of hardened stepped jaws, as well as the assembly and operating manual for the Horvath eccentric clamping chuck in what is presumably the original wooden case (Hahn & Kolb). Year of manufacture unknown. From our own inventory. Eccentric lathe chuck for clamping workpieces in a lathe. Price / details on request. All technical details are subject to error or typographical mistakes. Prjdpfx Aog Umb Eodnsd Sales exclusively to countries within the European Community.

Condition: used, Technical details: diameter: 250 mm width: 80 mm revolution per minute: 1800 U/min weight of the machine approx.: 17 kg dimensions: Ø 250 x B: 110 mm Flange mount on base body = Ø 210 x 6 mm, pitch circle Ø 228 mm with 3x M12 holes incl. 3 soft jaws mounted as outer jaws, max. clamping range outside: Ø 60 - 188 mm and max. inside: Ø 17 - 192 mm Equipment: with chuck key Prjdpfjvgbhqex Adnod *

Condition: good (used), live center, live center, live morse taper, live center, live lathe center, live center, centering cone, centering ball, centering mandrel, centering chuck, pipe centering chuck, live centering chuck -Manufacturer: Kondamat, centering chuck pipe centering chuck -Recording: MK4 -Dimensions: see photos -Dimensions: Ø 78 x 230 mm -Weight: 2.7 kg Pjdsxrlvlepfx Adnsrd

Condition: good (used), live center, live center, live morse taper, live center, live lathe center, live center, centering cone, centering ball, centering mandrel, centering chuck, pipe centering chuck, live centering chuck -Manufacturer: Kondamat, centering chuck pipe centering chuck -Recording: MK4 Prodpfexrlt Rjx Adnsd -Dimensions: see photos -Dimensions: 200/200/H285 mm -Weight: 10.1 kg

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outside: Ø 130 mm -Bolt circle: Ø 75 mm -Hole: short cone 3, cone Ø 51 - 53 mm -Dimensions total Ø 130 x 50 mm Prodpfx Adjxrlfgoned -Weight: 1.4 kg

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outside: Ø 200 mm -Bolt circle: Ø134 mm -Hole: short cone 6, cone Ø 101 - 106 mm -Dimensions total Ø 200 x 145 mm -Weight: 7.6 kg Pedpfx Asxrk T Njdnsrd