Metal cutting Tooling ROHM - 3538

RÖHM 3538

Condition: excellent (used), Year of construction: 2020, travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,500 mm, rapid traverse X-axis: 35,000 m/min, rapid traverse Y-axis: 40,000 m/min, rapid traverse Z-axis: 40,000 m/min, total width: 5,800 mm, total height: 4,500 mm, total length: 13,500 mm, table length: 10,000 mm, table width: 1,250 mm, Travelling Column High performance, precision and machining power Linear guiding of RAM combined with Hydrostatic Guiding HDS ACD2 Milling head with 5000 Rpm and 1400 Nm torq Aitek ATC chain 60 position with L=400 and 250 diameter x 35 Kg Filtration with IKZ 15 Bar Chip conveyor BLUM 3D Measuring probe Wide bed linear guided in X-Travel W=930 mm Rotary table driver prepared in E-Cabinet X-Axis: 8000mm Y-Axis: 1300mm Z-Axis: 2500mm Table Length: 10000mm Table Width: 1250mm Nledpfxoyr Dmde Ag Ijh Power on spindle: 40kW Spindle speeds: 5000Rpm Spindle Taper: 40ISO/Bt/Mk Feed rate X-Axis: 35000mm/min. Feed rate Y-Axis: 40000mm/min. Feed rate Z-Axis: 40000mm/min. Millinghead auto-index:0.001 x 0.001 Gr° Working hours: 3800H Length: 13500mm Width: 5800mm Height: 4500mm Weight: 45000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Technical details: bending angle max.: 0 - 225 ° working height: 850 mm operating voltage: 380 V bending angle max.: 0 - 225 ° number of bars max.: 15 mm diameter max.: 55 mm revolutions per minute: 5 -16 U/min total power requirement: 5,5 kW Njdpfjx Adbnjx Ag Iolh Weight approx.: 0,7 t dimension machine xH: 1,60 x 1,20 x 1,02 m Reinforcing Steel Bending Machine Perfekt 55 KA, PA, PLA — high-performance production machine. Thanks to the control system with four different bending speeds, the machine operates with exceptional efficiency. The bending angle is continuously adjustable from 0 to 225 degrees for left or right rotation. With its correction potentiometer for material spring-back compensation, the machine is ideal for medium and large-scale series production. Using the PA program control unit, up to eight different bending angles can be continuously pre-programmed from 0 to 225 degrees via rotary knobs. without accessories! *

Condition: good (used), Year of construction: 2007, control 840 D x-axis 2500 mm y-axis 2500 mm z-axis 1700 mm Control system - Siemens Sinumerik 840 D Max. workpiece weight - 6000 kg Spindle diameter - 130 mm Quill stroke - 700 mm Tool holder - ISO 50 DIN 69871 - AD Max. torque at the spindle - 1847 Nm Total power requirement - 65 kW Machine weight approx. 45 t Nlodpfx Aowzyp Ueg Ish Space requirement approx. 10.9 x 9.3 x 5.7 m

Condition: good (used), total length undivided: 3000 mm edge heigth: 90 x 90 mm Nljdpfxshwwfxs Ag Ish

Condition: new, pressure: 600bending length: 6050column width: 5100daylight: 680stroke lenght (max.): 455column throat depth: 450messurements (LxWxH): 7100x3275x3910weight approx.: 50.2004 axes (Y1, Y2, X, R): Ja alle Achsen über die Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die Esa S630 (2D Grafik Steuerung)motor power: 45Standard Equipment:KK Kletzer Europa We have developed a high-quality model specifically for the European market:The CNC press brake by KK Industries, made in Turkey. Model: KK Kletzer EUROPA XL The powerful EUROPA XL press brake stands out for its high precision, accuracy, and versatile offers a very large open height, resulting in a long cylinder stroke, and an extra-large throat depth to provide maximum flexibility during operations. We focus on delivering quality—reflected also in the control system:As standard, the machine comes equipped with the ESA S640 2D graphic controller. Additionally, the KKI EUROPA XL is equipped with CNC-controlled Y1, Y2, X, and R axes via the wning is also included and fully CNC-controlled through the same ESA S640. When it comes to tooling, we make no machine is fitted with premium top tools and dies from EUROSTAMP Italy. Naturally, a machine is only as good as the service behind t’s why we rely on highly qualified staff with many years of experience in CNC sheet metal processing. Technical Highlights: CNC axes: Y1, Y2, X, and R Controller: ESA S640 (2D graphical interface) Backgauge with double linear guides and ballscrews Motorized CNC-controlled crowning system Heavy-duty height adjustment with handwheel(from 175 tons: on linear guides) Laser safety system on the upper beam CE-compliant safety equipment Nsdpfed Ehh Rsx Ag Islh Various options available Optional Controllers: ESA S640 – 15” 2D Touchscreen: ¤ 4,520.00 ESA 675 W – 21” 3D Touchscreen (Windows-based): ¤ 6,485.00 DELEM DA-66T – 17” 2D Touchscreen (Windows-based): ¤ 10,165.00 DELEM DA-69T – 17” 3D Touchscreen (Windows-based): ¤ 16,350.00

Condition: used, Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 35-10.000 1/min spindle: 37 / 30 kW max. torque on the spindle: 525 / 206 Nm Tool bore: BT 50 rapid traverse: 60 m/min tool change unit: 160 Pos. size of pallet: 500 X 500 mm control: MAZATROL 640M Nexus Nsdpewix Hhsfx Ag Ijlh c-axis: 0,001° x 360.000 workpiece weight: 1.000 kg workpiece height max.: 1.000 mm interference area: 900 mm 2 pcs. horizontal machining centers (HCN 6000-II + HCN 6000, 2005), interlinked with pallet pool (16 pallets) MAZAK FMS, 2 pallet changer, chipconveyor, coolant device with internal coolant supply, *

Condition: used, Year of construction: 2000, centre height 400 mm centre distance 3.000 mm max. swing over bed 810 mm max. swing over facing slide 510 mm max. swing-dia. in gap 850 mm control WEILER max. workpiece weight 3.800 kg spindle diameter in front bearing 150 mm spindle bore 106 mm faceplate diameter 630 mm worktool system Parat tailstock quill taper MT 6 dia. of quill 115 mm spindle turning speed range 1 - 1.800 U/min Lathe - cycle-controlled | WEILER - E80 x 3000 equipped with 630mm faceplate, 400mm SCHUNK ROTA-S plus chuck, boring bar attachment, PARAT tool system as well as a chip conveyor. A comprehensive tool package is included in the scope of delivery. The machine video from the production plant will be shared on request. The machine is in good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Nledpfey Ty Ihjx Ag Ieh #Tags: E-80 | E 80 | E80 x 3000 | E80x3000 | E 80 x 3000

Condition: new, Year of construction: 2026, functionality: fully functional, tank capacity: 50,000 l, Heating oil tank – storage tank – diesel tank – tank system – steel tank brand new – with a capacity of 50,000 liters – according to EN 12285-2 – Class B – (replacement for DIN 6616), above ground, double-walled, including test certificate, Nljdpfx Aoi A Hz Ajg Ijh suitable for installation in areas of seismic zone 0. The tank has two saddle supports, a manhole with a dome cover, and is equipped with the following fittings: 1 filling pipe with a TW closure (filling cap) and dip tube, 1 gauging pipe with a gauging rod and gauging rod closure, 1 vent pipe with a vent cap, 1 brand new limit switch with type approval (AIII), 1 ladder and 1 spare socket for withdrawal purposes, 1 optical leak detection device with type approval and leak detection fluid. The tank will be sandblasted, primed, and painted white externally / RAL 9016 color (sample photo). (Other RAL colors are also available on request!) L = approx. 10.70 m – D = 2.50 m – Weight approx. 9.5 tons – ex works, loaded free of charge – General: You will receive an invoice with VAT shown. The purchase is subject to our general terms and conditions. Other tank systems (new and used) as well as rental systems are also available! In addition, we purchase existing tank systems and can, with certified specialist company qualifications in accordance with the German Water Resources Act (§ 62 WHG), professionally empty, clean, dismantle, and transport them away.

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 420 mm, spindle bore: 103 mm, turning diameter: 660 mm, turning length: 3,000 mm, spindle speed (max.): 1,320 rpm, spindle speed (min.): 9 rpm, spindle motor power: 15,000 W, Equipment: rotational speed infinitely variable, Immediately available. No waiting, start machining right away! Machine: MEXPOL TUB 660 x 3000 mm with stepless speed adjustment via frequency inverter Bed width: 560 mm Distance between centers: 3000 mm Center height: 330 mm Spindle bore: 103 mm Workpiece weight: up to 3000 kg Spindle nose: DIN 55027/11 Speed range: 9 – 1320 rpm Main drive: 15 kW Feed rate: longitudinal feed 0.039–18 mm/rev, cross feed 0.02–9 mm/rev Rapid traverse: longitudinal 3800 mm/min, cross 1900 mm/min Tailstock: Quill diameter 105 mm, Stroke 225 mm, MT6 Thread cutting: metric, inch, module, DP Standard equipment: frequency inverter, quick-change toolpost size C, coolant system, interlocked chuck guard, Nljdpfeyr Dmksx Ag Ioh work light, change gear set, CE conformity Dimensions: 4970 × 1650 × 1500 mm Weight: 4750 kg Fixed steady rest (roller jaws) Ø 20–200 mm Fixed steady rest (roller jaws) Ø 180–430 mm Delivery: Immediate from stock (while stocks last)

Condition: good (used), spindle bore: 360 mm, travel distance X-axis: 798 mm, travel distance Z-axis: 358 mm, spindle motor power: 45,000 W, rotational speed (max.): 500 rpm, total height: 2,100 mm, total length: 8,100 mm, total width: 2,750 mm, overall weight: 13,000 kg, Chip conveyor  SMW Front and Rear chuck 700 mm  Double revolver 6+8 positions Big Bore 360 mm Tailstock with power quill Tooling package included with inserts and jaws Max. turning Ø:665mm X-Axis: 798mm Z-Axis: 358mm Nodpowxb Ersfx Ag Iolh Spindle bore: 360mm Speedrange: 500Rpm Spindle power: 45kW Pinole taper: 6Mk Stroke pinole: 230mm Quill Ø: 150mm Length: 8100mm Width: 275mm Height: 2100mm Weight: 13000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!