Used Cold Water for sale (8,689)

Condition: new, Year of construction: 2021, machine/vehicle number: 2200383125, Sales exclusively to customers with a German billing and delivery address! Process chiller / refrigeration unit / chilled water system, air-cooled, Type: TAEevo Tech 1002 P3-20-OFF MTA S.p.A. TAEevo Tech 1002 P3-20-OFF are air-cooled compact water chillers suitable for outdoor installation (from -20°C to +46°C). Includes crankcase heater, phase monitoring, buffer tank 950 liters, built-in P3 circulation pump, and winter package -20°C (variable speed control of the fans, condenser pressure control). Chilled water outlet temperatures from -10°C to +30°C can be adjusted. Cooling capacity kW 200 [682428 Btu (IT)/h] Chilled water temperature outlet/inlet (°C): 7 / 12 Flow rate (m³/h) 34.2 Available pump pressure (bar) 3.09 Ambient temperature (°C) 32 Refrigerant R 410A Electrical data: Voltage V 400, Frequency Hz 50, Phases Ph 3, Max. power consumption (kW) 99 Max. current (A) 167 Starting current circuit (A) 371 Protection class: IP54 Dimensions: Kdsdpfxjlgzcde Ahbju Length (mm) 4655, Width (mm) 1250, Height (mm) 2155 Weight (kg) 2998 Connection Victaulic DN 100 Serial No.: 2200387535 Year of manufacture 2022 Condition: Visually 2, Technically ok Used Price: on request in Euro (plus VAT ex Nettetal) – 3 months warranty Used machines may have visual imperfections due to their use. (Subject to technical changes and prior sale!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: new, Available from stock / available in the short term! Speed: 17/34 rpm. For saw blades up to 350 mm in diameter. With pole-changeable three-phase motor, 1.4/1.9 kW, stationary base frame with integrated coolant system and chip drawer. Cutting range: Flat 90° 170 x 100 mm Flat 45° 120 x 100 mm Flat 30° 85 x 100 mm (only to the right) Square 90° 100 mm Square 45° 95 mm Square 30° 85 mm (only to the right) Round 90° 120 mm Kedsllvpwjpfx Ahbodu Round 45° 120 mm Round 30° 100 mm (only to the right) Technical data: Length 895 mm Width 665 mm Height 1750 mm Weight 300 kg Table height 900 mm Options: Roller conveyors and length measuring devices (image = example, available in manual and automated versions, upon request) We recommend our coolant concentrate, which has been tried and tested for "Eisele" saws for decades, our microspray oil (for machines with a microspray system), as well as high-quality circular saw blades and band saw blades for your specific needs. Feel free to contact us for a non-binding quote!

Condition: used, Year of construction: 2005, Overview This Labeling Machine was built in 2005 by Gernep. It was in operation in a fruit juice plant in Germany till 01/2022. In this company it was only used in single-shift operation for about 100 days a year, which is why the condition of the machine is still very good. Tech Specs: Kdodel Hxzvjpfx Ahbsu - Capacity: 6,000 bph at 1L bottles - Number of aggregates: 2 Accessories: - Formats for 1.0 l VdF glass bottles, 0.7 l VdF, 0.2 l glass bottles goiter neck - Various spare parts included

Condition: excellent (used), GRUNDFOS PUMP TP80-400/2 Item: D-5490-Grundfos pump USED WATER PUMP, GRUNDFOS Type TP80-400/2, 15,0 kW, Bar/C - 16/120 Q - 114,8 m3/h Kedpfx Ajl I R T Nehbodu H - Max 34,7 m O/m- 2940 Nice condition 3 pieces identical

Condition: new, Year of construction: 2026, Standard features: With pivoting head (left/right) for miter cuts, two speeds, Sturdy cast iron machine housing, Reduction gear in oil bath, consisting of a bronze gear and hardened, ground steel worm. Quick-action vise with counter-clamping device for double workpiece clamping. Durable, mechanical coolant pump Adjustable length stop Operating tool Machine color: RAL 7037 Technical specifications KS 315 M Motor: three-phase 400 V, pole-changing (kW) 1.3/1.9 Vise clamping width (mm) 110 Cooling tank capacity (l) 5 Ksdpfx Aeuihkljhbjdu Working height with base frame (mm) 980 2 speeds (rpm) 41/82 Machine dimensions with base frame (mm) 1,000 x 1,100 x 1,800 Machine dimensions 12-month warranty for single-shift operation Not included: Saw blade (mm) Ø 315 x 32 Steel base frame DELIVERY: FREE (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: good (used), Year of construction: 1976, functionality: fully functional, Cold circular saw with automatic feeder Year of manufacture: approx. 1976 Equipment: - Standard accessories - Automatic feeder, cutting length 1700 mm - Various saw blades - Coolant system - Infeed roller conveyor 2400 mm, split (2 x 1200 mm) - Outfeed roller conveyor 500 mm Kdsdpfx Ahowtdi Asbju - Documentation Condition: good, workshop tested

Condition: used, Year of construction: 2004, Overview  The labeller was built in 2004 by Italian manufacturer KOSME. The machine is in a good condition, already professionally dismantled and stored in a warehouse. Two cold glue stations. One label, one neck label, one counter label + one adhesive station. The labeler is working in counter-clockwise direction Kdedpfx Ahev Df I Nebsu Technical details - Capacity: - 6,000 bph - Labeling stations: - 2 cold glue - 1 self adhesive

Condition: used, Year of construction: 2010, operating hours: 3,426 h, functionality: unexamined, pressure: 6 bar, power: 12,600 kW (17,131.21 HP), temperature: 110 °C, operating temperature: 110 °C, total height: 3,025 mm, total length: 6,315 mm, nominal heat output: 12,600 kW (17,131.21 HP), total width: 2,724 mm, insulation thickness: 100 mm, tank capacity: 18,300 l, We offer this Buderus S825L-12600 hot water boiler, in very good condition, manufactured in 2010. Type: S825L-12600 Maximum permissible pressure: 6 bar g Test pressure: 9.6 bar g Maximum permissible temperature: 110 °C Nominal thermal power: 12600 kW Total volume: 11830 l Serial number: 31022150-00-106809 Month/year of manufacture: 08/2010 Manufacturer: Bosch / LI LA If you have any further questions or require more information, please do not hesitate to send us a message or call us. Kedpfjzlqb Tex Ahbedu

Year of construction: 2025, condition: excellent (used), 2025 heavy duty stationery hot water pressure wash system. Recently removed from a closed food factory, they had several of these outside the main building to wash separate areas of the factory. 175 bar pressure, 1,260 litres per hour max flow. 8.2Kw motor and 115 Kw boiler. Frost protected to -20 degrees C. This is the newest one which was only used for a short time, we also have two from 2017 and 2019 both in nice condition. Kedpfxezt N R Nj Ahbjdu

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Reverse osmosis plant. Inlet pressure: 3 bar. Capacity: 4 m³/h. Power: 34 kW. Maximum pressure: 55 bar. Equipped with Grundfos pumps, frame, stainless-steel piping, pretreatment system, tanks and control panel. Serial No.: 2005118. Kedpjzvchasfx Ahbjdu

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, CARRIER 09VE 1064 WATER DRY COOLER – YEAR 2025 Industrial Carrier dry cooler featuring a V-shaped coil, two independent water circuits and axial fans. Supplied with a steel support frame, electrical control panel and DN 65 hydraulic connections. TECHNICAL DATA Manufacturer: Carrier Model: 09VE 1064 UI 1270A9B 12A1V1 CU Product reference: 7416018.702174 Serial number: 04136261/0001 Year of manufacture: 2025 Working fluid: Water Number of circuits: 2 Volume per circuit: 120 litres Maximum working pressure: 13 bar Kodpezvf Ebjfx Ahbedu Maximum temperature: 110 °C Hydraulic connections: DN 65 Power supply: 400 V / 3-phase + N / 50 Hz Electrical power input: 35 kW Rated current: 46.8 A Weight: 1,340 kg PED: 2014/68/EU PED classification: Article 4.3, Group 2 liquid Certifications: CE, UKCA and EAC The unit is installed outdoors and available for inspection. The scope of supply includes the dry cooler and its electrical control panel.

Condition: good (used), Year of construction: 1996, functionality: fully functional, Automatic Sheet Feeder A-20-P (Pile Table, Mabeg Suction Head, Double Sheet Control, Suction Belt Table) Automatic Laminating Unit EK 102 (Waterbased & Thermal) Seperating Unit: Seperating Roller Jogging Table (Delivery) Format: 1020 x 1140 mm Condition: Cleaned Kdedpfxezvwkvj Ahbsu

Condition: good (used), Year of construction: 2016, operating hours: 100 h, functionality: fully functional, total width: 6,300 mm, total length: 15,000 mm, total height: 4,000 mm, overall weight: 2,000 kg, type of cooling: air, Equipment: type plate available, The chamber is in perfect condition and has barely been used. It is currently disassembled, with all its components included (walls, doors, lighting fixtures, ceiling, evaporator compressors). It does not include the refrigerant gas. Everything can be loaded onto a trailer. Kdodpfxszwmwno Ahbju

Condition: used, feed pressure 10 bar power capacity / kW Kedpjymgavofx Ahbodu liter capacity / l Wilo DPL80/130-3/2 DPL standard twin-head glanded pump

Condition: used, Year of construction: 2001, sheet width 1650 mm plate thickness 0,5- 3 mm Kdodpfxezafi Nj Ahbeu number of rolls 21 straightening feed 0- 60 m/min straightening roll diameter 50 mm adjustment 30 mm weight of the machine ca. 24,5 t dimensions of the machine ca. 4,5x 2 x 2,8 m voltage 400 V passage width 1720 mm number of support rolls 18 main drive motor 45 kW run-in height 1250 mm 6 HI High-performance straightening machine with 21 rolls for fine straightening work of steel or non-ferrous metals. Machine has 23 intermediate rolls and 18 support points. Working rolls are adjustable with DRO in 0,01 mm. Main Gearbox was renewed in 2021.

Condition: used, Year of construction: 2017, Automatic cold press Manufacturer: CMB Type: PFR-CCL Year of manufacture: 2017 Technical data: Motorized loading table 3,500 x 1,600 mm for manual assembly of the plates and automatic loading into the press on the 1,600 mm side. Structure made of welded steel profiles. Devices for adjusting the working height to compensate for unevenness in the floor. Steel rollers. Foot switch. PRESS Plate size: 5,500 x 1,600 mm Loading side: 1,700 mm Stroke: from top to bottom Opening: 450 mm Cold press The plates are made of steel sheet and attached to a steel frame structure. Maximum pressing force: 160 tons. Specific pressure (on 100% of the area): 1.82 kg/cm2 Kdedpfezuzw Djx Ahbju Specific pressure (on 80% of the area): 2.27 kg/cm2 Pressure cylinder: 12 x 80 mm Auxiliary cylinders: 6 x 50/30 mm Power supply: 400 Volt EU/50 Hz/3 PH. + G AUTOMATIC LOADING and UNLOADING of the plates on the lower plate, on the 3,500 mm side. The transport is carried out via a motorized MYLAR belt. The belt is activated by 2 rollers, one of which is located at the entrance and one at the exit of the press. The rollers are driven by a motor with a chain that slides on special guides. The Mylar belt rotates around the lower plate, which rests on special side supports. The belt rotates on 2 rollers, which are located at the entrance and exit of the press. The ends of the MYLAR belt are attached to special rods with devices for tensioning the MYLAR. The upper plate is covered with a Mylar film. The press plates consist of thick steel sheets that are welded to the frame structure. HYDRAULIC UNIT with pump, oil tank and valves for operating the pressure cylinders and auxiliary cylinders that move the upper plate. The hydraulic control unit is located in the upper part of the press to facilitate maintenance. CONTROL PANEL with buttons and switches. Pressure control manometer on the front of the press. UNLOADING MOTORIZED ROLLER TABLE 2,000 x 1,600 mm The unloading table is located at the exit of the press for manual unloading of the pressed plates. Exit side from the press: 1,600 mm. Note: The loading table of the press with the dimensions 3,500 x 1,600 and the unloading table with the dimensions 2,000 x 1,600 are shorter than the press table with the dimensions 5,500 x 1,600, as the press was installed in a line. Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: new, power: 316 kW (429.64 HP), first registration: 09/2025, fuel type: diesel, tire size: 315/80R22.5, axle configuration: 6x4, wheelbase: 38,000 mm, fuel: diesel, fuel tank capacity: 290 l, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro3, suspension: steel, total length: 9,000 mm, total width: 2,500 mm, total height: 3,500 mm, loading space volume: 20 m³, Year of construction: 2025, Equipment: air conditioning, = Additional Options and Accessories = - Leaf spring suspension - Windshield - Power take-off (PTO) = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,882 cc Kodpfxszq D T Tj Ahbjdu Transmission Gearbox: ZF16TX2240TO, Automatic Axle Configuration Tire size: 315/80R22.5 Brakes: Drum brakes Suspension: Leaf spring suspension Front axle: Steerable Weights Unladen weight: 12,700 kg Payload: 20,800 kg GVW: 33,500 kg Functional Body manufacturer: Ravasini Drinking water tank Number of compartments: 1 Pump: Yes

Condition: used, Year of construction: 2017, functionality: fully functional, Rotox FWS 381 Kodpozpygyofx Ahbedu

Condition: used, Quantity: 3 units Industrial temperature control units from thermobiehl for water temperature control of tools or consumers. Manufacturer: thermobiehl Model series: puffin Device type: water temperature control unit / tool temperature control unit Temperature control circuits: 2 circuits Kedpfx Ajzx Tdwehbjdu Operation: separate thermobiehl controllers for each temperature control circuit Connections: including mold/system circuit, cooling water, and utility water Design: mobile

Condition: like new (used), Year of construction: 2023, operating hours: 800 h, functionality: fully functional, HAMMELMANN® Aquajet 50™, HDP503™, manufactured in 2023, approximately 800 operating hours. Installed in a 20´ soundproof container. Scania® diesel engine, 566kW, Stage V, AdBlue™. ES4™ control unit. 1600 bar / 166 liters. Fully inspected. Ideal for hydrodemolition robot applications and industrial cleaning (TRG 1600 XL). Trailer not included. Kdedpfszy Hahjx Ahbju

Condition: excellent (used), Year of construction: 2005, power: 225 kW (305.91 HP), fuel type: diesel, type of cooling: water, Regularly maintained Volvo Diesel fire water pump for sale in new condition Kdjdshfl Dmepfx Ahbou Machine hours: 298 inspection and oil change at all maintenance intervals, regardless of use. Manufacturer: Kagema DPA Engine: Volvo Penta TWD 710 V 218 kW / 296 HP 6-cylinder diesel engine Data: Manufacturer: Volvo Penta Type: TWD 710 V. Spec.NO .: 868725 Serial number: 2071093240 Vermogen: 225 kW / 304hp Speed: 2450 rpm Fuel: diesel Length: 330 cm Width: 120 cm Height: 220 cm tank: 400liter water transport ca: 800-900m3 6.5 bar pressure water pump type: KSR-MXN 150-315 "missing" Purchase of industrial equipment and machinery. Wide Range of Used Machinery, Industrial Equipment

Year of construction: 2026, condition: new, functionality: fully functional, New unit with a 12-month warranty. Advantages of chilled ice water: + consistently low water temperatures + precise dough temperature control year-round + rapid swelling when mixing without ice + fluffier doughs due to freshly chilled, liquid ice water + precise dosing possible via water mixing and dosing unit + water-carrying parts are made of stainless steel and require no cleaning + hygienically impeccable clean drinking water Langheinz ice water systems are characterized by: Kedpfsivdvvox Ahbodu + consistently low water temperatures + high-performance refrigeration units + refrigeration systems with expansion valve + electronic ice bank controllers + stainless steel cooling evaporators + multiple stainless steel water heat exchangers + insulated stainless steel ice water tank + drain valve in the ice water tank + high flow rate + compact dimensions + easy-to-clean surface structure + low energy consumption SPECIAL accessories, optionally available at an extra charge: - Wall bracket made of stainless steel (for models L130 + L170): + €499.00 net - Machine table (for models L130 + L170): + €589.00 net - 3-way diverter valves --- for water mixing and dosing units with only 2 inlets (cold / warm) + €349.00 net Technical data: - Batch size (recommended): up to 50 liters - Continuous output*: 115 liters/hour - Peak cooling capacity*: 330 liters/hour - Ice bank: 40 kg - Cooling capacity (CECOMAF): 1.86 kW - Refrigerant: R290 (new 2021 standard!) - Connection values: 230 V - 50 Hz - Power consumption: 1.45 kW - Water connection: 1/2 inch - Water flow rate at 2 bar: 20 liters/min - Dimensions: 560 x 590 x 900 mm (L x W x H) - Net weight: 80 kg - Energy consumption for 100 liters: 1.5 - 2.5 kWh * at +17.5°C inlet and +2.5°C outlet

Condition: new, Year of construction: 2025, Automatic water filling system for up to 4.000 bottles per hour. Including feeding system for empty bottles to the 18-head rotary rinser. Rotary filling station (12 heads) with gravity filling principle. The capping unit is working with 6 capping heads and is suitable for 28 and 30mm PE standard caps. All product contacting parts are made of SS304 or standard food package plastic. The frame is made of high quality carbon steel Q235 (optional SS304). MITSUBISHI PLC, WEINVIEW Touchscreen. - Specifications: max. speed of the machine in neutral: 66 cycles/minute; number of rinsing heads: 18, number of filling heads: 12, 6 capping heads; bottle volume: 350-2000ml; bottle diameter: 50-90mm; bottle height: 150-310mm; filling tolerance: +/- 2%; compressed air: 0.5m³/6bar; filling water: 1.5m³/h; rinsing water: 0.5m³/h; power: 380V, 3.5kW; machine dimensions: L2700xW1600xH2800mm; weight: 2.500kg. Kdedsv Nlacepfx Ahbsu Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Automatic water filling system for up to 18.000 bottles per hour. - Including feeding system for empty bottles to the 40-head rotary rinser. - Rotary filling station (40 heads) with gravity filling principle. The capping unit is working with 12 capping heads and is suitable for 28 and 30mm PE standard caps. - All product contacting parts are made of SS304 or standard food package plastic. - The frame is made of high quality carbon steel Q235 (optional SS304). - MITSUBISHI PLC, WEINVIEW Touchscreen, Specifications: productivity 6.000-18.000 bottles per hour, number of rinsing heads: 40, number of filling heads: 40, 12 capping heads, bottle volume: 350-2000ml, bottle diameter: 50-90mm, bottle height: 150-310mm, filling tolerance: +/- 2%, compressed air: 0.5m³/6bar, filling water: 9m³/h, rinsing water: 3m³/h, power: 380V, 7.5kW, machine dimensions: L4300xW3400xH3050mm, 12.000kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Kjdpfev Nlaisx Ahbsdu

Condition: good (used), Year of construction: 2010, saw blade diameter: 250 mm, overall weight: 130 kg, input voltage: 380 V, coolant pump power: 100 W, Huvema HU250 DV cold circular saw for sale Kedpfx Astwdvijhbodu Manufacturer: Huvema Type: HU 250 DV Year of manufacture: 2010 Voltage: 400 V 50 Hz Mounted on a tripod, rotating head, quick clamp. 2-speed motor Liquid cooling with pump Dimensions of the saw blade: 250 x 32 mm Cutting capacity 45° straight: 50 x 60 mm Cutting capacity in a 45° circle: 65 mm Cutting capacity 45° square: 55 mm Cutting capacity 90° straight: 55 x 95 mm Cutting capacity in a 90° circle: 70 mm Cutting capacity 90° square: 70 mm Dimensions: Height: 150 cm Width: 60 cm Length: 90 cm Weight: approx. 150 kg