Used Cold Light Source for sale (17,252)

Condition: used, maximum load weight: 29,380 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2024, loading space length: 13,590 mm, loading space width: 2,480 mm, loading space height: 2,710 mm, loading space volume: 91 m³, Equipment: ABS, Coil well 9,000 mm for accommodating coils with a diameter of 900 - 2,100 mm. 20 x coil trough covers. Stake pockets in the coil well and in the outer frame. ----Kögel Light Coil. Construction specification available on request! ----* Lift axle * BPW axles * WABCO SmartBoard multi-function system * Coil well * Raise and lower device for air suspension * Sliding roof * Sliding curtain left and right sides * Anti-lock braking system (ABS) * Disc brakes * Air suspension * Roof tarpaulin de-icing system * Load securing certified according to VDI2700 + DCE RL9.5 * Lashing rings in the outer frame * Outer perforated frame for load securing * Load securing certified to DIN EN 12642 Code XL * Aluminium rims * Tyre pressure monitoring * Rear access ladder * Rear doors * EBS Dksdpfx Aisyuluzowol * Without spare wheel ----Sale only to businesses! No guarantee for the information provided! Subject to prior sale! Only our general terms and conditions apply! We would be happy to make you a leasing or financing offer.

Condition: used, functionality: fully functional, machine/vehicle number: 3133, overall weight: 25,000 kg, ESAB Column & Boom Manipulator with ESAB LAF 1250 DC & ESAB TAF 800 AC Welding power sources 7,000mm Vertical travel 5,500mm Horizontal travel 10.510mm Overall total 25.00kg Weight Dksdpey Azh Uofx Aiwol

Condition: used, functionality: fully functional, Miller Subarc DC 1250 Digital Welding Power Source 1250A, 44V, 3-Phasefeatures digital controls Dkedpfsy Azh Isx Aiwol

Condition: excellent (used), saw blade diameter 400 mm cutting diameter 130 mm stroke 150 mm mitter cutting - all-position +90°/-90° ° cutting speed 10/20 m/min voltage 400 V feed speeds infinitely variable 0 - 1000 mm/min Dksdpfey Aytvex Aiwel total power requirement 3,4 kW weight of the machine ca. 840 kg dimensions of the machine ca. 1,10 x 0,9 x 1,50 m

Condition: new, Year of construction: 2025, Saw Diameter: 500 mm Motor Power: 4 kW Cutting Range of the 500 mm Diameter Circular Saw Cutting Capacity 0° (square) for solid material: 170 x 170 mm Cutting Capacity -45° (square) for solid material: 160 x 160 mm Cutting Capacity +45° (square) for solid material: 160 x 160 mm Cutting Angle: -67.5°, -45°, -30°, -22.5°, -15°, 0°, 15°, 22.5°, 30°, 45° Dimensions (without feeders): Width 825 mm x Depth 1074 mm x Height 1397 mm Saw Speed: 3000 rpm Motor: 4 kW, 50 Hz, 400V AC, three-phase (3PPE) power supply Machine weight: 220 kg Djdpfx Aisxdciaewekl Cutting disc diameter: 500 mm Cutting disc bore diameter: 32 mm Operating pressure in the pneumatic system: 6–8 bar Cooling system: The machine is equipped with an oil mist system to cool the cutting blade, which increases the tool's durability and performance. Note: A coolant tank is not included and must be installed by the customer.

Condition: used, Year of construction: 1990, saw blade diameter 300 mm cutting diameter 90 mm turning speeds 40/80 U/min total power requirement 1,5 kW weight of the machine ca. 350 Kg dimensions of the machine ca. 0,9 x 0,8 x 1,5 m Dedpfoy Ehx Eex Aiwokl Cold circular saw - Machine light - Coolant system

Condition: good (used), Year of construction: 1996, cutting range min. 250 - 2200 mm saw blade diameter 250 x 20 mm cutting range 50 x 70 mm mitter cutting - all-position 90 u 45 ° total power requirement 2 x 1,1 kW weight of the machine ca. 0,42 t dimensions of the machine ca. 2,94 x 1,15 x 1,22 m Including positioning control Including electronic measuring rod We connected the machine, but unfortunately couldn't operate it because we are unfamiliar with it. The hoses should be replaced because air is leaking from some of them. Dedpfey Aa R Iox Aiwjkl Feel free to come by and take a look in person.

Condition: good (used), Year of construction: 2009, functionality: fully functional, saw blade diameter: 500 mm, Equipment: documentation/manual, Technical data and cutting diagram can be downloaded on the right. 730 mm per stroke, limited to 3 repetitions. Saw blades Ø 500 x 4.4 x 30 mm. Cutting only at 90° angle. Maximum cutting length with 3 repetitions: 2180 mm. Dedpjy D Sywsfx Aiwekl

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 92361, overall weight: 270 kg, Circular saw for cutting steel and steel pipes Year of manufacture: 2011 Weight: 270 kg Dedpfxowlz I Te Aiwskl Prepayment required Shipping costs not included Can be inspected upon request.

Condition: good (used), Year of construction: 1998, saw blade diameter: 300 mm, For sale is an MEP Tiger 300, a high-quality circular saw for metalworking. This machine was built in 1998 but is in good condition. It is perfect for workshops and production environments that require a reliable and precise sawing solution. Machine Features: Manufacturer: MEP (Mecchia Eredi Pio) Model: Tiger 300 Year of Manufacture: 1998 Saw Type: Semi-automatic/Manual Circular Saw Saw Blade Diameter: 300 mm Cutting Capacity: Suitable for round materials, square profiles, and miter cuts Dkjdpfxsv Tlcre Aiwol Cutting Angles: 90° and 45°, with miter cuts in both directions Materials: Ideal for cutting iron, steel, and other metals Condition: Good condition Coolant Supply: Integrated cooling system for better cut quality and extended saw blade life

Condition: used, TECHNICAL DETAILS - Parts per minute : 300 - Cutting diameter : 6 [mm] - Die ejection : 55 [mm] - Floor space (width) : .97 [m] - Floor space (length) : 2.77 [m] - Motor : 7.5 [hp/kW] - Net Weight : 3500 [kg] - Gross Weight : 4100 [kg] Dkodpfxsuhb T Dj Aiwol EQUIPMENT - Tooling as per photo - Positive ejection on 2 punches - Ejector retraction in die - Various spare parts

Condition: used, TECHNICAL DETAILS - Parts per minute : 300 - Cutting diameter : 6 [mm] - Die ejection : 55 [mm] - Floor space (width) : .97 [m] - Floor space (length) : 2.77 [m] - Motor : 7.5 [hp/kW] - Net weight : 3500 [kg] - Gross weight : 4100 [kg] Dodpfxouhb Two Aiwekl EQUIPMENT - Equipped with ejector recoil between rough part and finishing (RLKO) - Positive ejection (TKO) - Tooling as per photo

Condition: used, TECHNICAL DETAILS Dodpouhb Tqsfx Aiwskl - Parts per minute : 450 - Cutting diameter : 4 [mm] - Die ejection : 25 [mm] - Floor space (width) : .74 [m] - Floor space (length) : 1.88 [m] - Motor : 4 [hp/kW] - Net Weight : 1600 [kg] - Gross Weight : 2100 [kg] EQUIPMENT - Tooling as per photo

Condition: used, TECHNICAL DETAILS - Parts per minute : 400 - Rivet length : 12 [mm] - Drilling depth (max.) : 5 [mm] - Cutting diameter : 3 [mm] - Floor space (width) : 1.12 [m] - Floor space (length) : 2.21 [m] - Height : 1.77 [m] - Motor : 4 [hp/kW] - Net weight : 2,500 [kg] - Gross weight : 3,000 [kg] EQUIPMENT Dedpfx Ajuhb Tkeiwekl - Tooling as per photo

Condition: new, mileage: 1 km, first registration: 01/2026, fuel type: diesel, number of seats: 49, gearing type: automatic, emission class: euro6, color: other, brakes: retarder, total length: 10,800 mm, total height: 3,460 mm, Year of construction: 2026, Equipment: ABS, cruise control, = Additional Options and Accessories = - Webasto Djdpsx Ahb Ssfx Aiwjkl = Further Information = Damage: none = Company Information = We are an international company based in Belgium, located in the Brussels area (approx. 20 km). Belgian Bus Sales is your ideal partner for the purchase and sale of used buses and offers a large premises serving as an exhibition area. We always have numerous buses of all brands, capacities, models, and price ranges in stock. We can find the right coach, school bus, or city bus for you, tailored to your needs and budget. All information is provided without guarantee. Errors, prior sale, and typographical mistakes excepted. Opening hours for viewing used buses: Mon.-Fri.: 08:30 - 12:00, 12:30 - 17:00. Mowimy po Polsku (Agata) We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski, and more.

Condition: new, mileage: 1 km, power: 235 kW (319.51 HP), first registration: 01/2026, fuel type: diesel, number of seats: 56, gearing type: automatic, emission class: euro6, color: other, brakes: retarder, total length: 12,100 mm, total height: 3,460 mm, Year of construction: 2026, Equipment: ABS, air conditioning, cruise control, = Additional options and equipment = Djdpfjxwnrtjx Aiwjkl - Air conditioning - Webasto heater = Further information = Damages: none = Company information = We are an international company based in Belgium, near Brussels (+/-20 km). Belgian Bus Sales is your ideal partner for buying and selling used buses, featuring an extensive parking area serving as our showroom. We always have a large selection of buses in stock—various brands, capacities, models, and price ranges. We can find the right touring coach, school bus, or city bus tailored to your requirements or budget. All information is provided without guarantee. Subject to errors, prior sale, and typos. Viewing hours for used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. Mówimy po polsku (Agata). We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski, and more.

Condition: like new (used), Year of construction: 2023, operating hours: 1,809 h, functionality: fully functional, machine/vehicle number: 1559, saw blade diameter: 550 mm, feed length X-axis: 800 mm, total length: 2,400 mm, total width: 2,000 mm, total height: 1,800 mm, cutting range round steel at 90°: 190 mm, type of input current: three-phase, rotational speed (max.): 2,850 rpm, cutting height (max.): 150 mm, overall weight: 1,650 kg, section length (min.): 3 mm, section length (max.): 4,000 mm, saw blade speed: 2,850 rpm, input voltage: 400 V, saw drive: 7,500 W, cutting diameter: 270 mm, saw blade bore: 40 mm, Circular Saw Fully Automatic PROFILMA 502 + Chip Extraction MG 3 ST Circular Saw Fully Automatic PROFILMA 502 Fully automatic operation, 7.5 kW drive, S6, 400 V, 50 Hz, 2850 rpm. Suitable for saw blades Ø 550 mm, cutting capacity 270 x 150 mm (width x height), Ø 190 mm. Max. profile width 270 mm. Equipped with Siemens S7 controller with touch display incl. piece counter. Includes CPU 315 and Flexisoft, batch multiplier for bundle material processing. Cycle time indication in seconds, chain dimensions, includes reversing device for cut lengths up to 4 m max. Automatic shut-off via limit switch at end of material, fault diagnostics, including IXON router for VPN connection (see datasheet). Motorized saw blade feed, steplessly adjustable, vertical and horizontal clamping from bottom to top (both on feed and discharge side of saw head). Cutting gap extension on both sides of the saw blade. Electronic material feed unit with 800 mm feed length, utilizing ball screw and servomotor, including pneumatic horizontal and vertical clamping system. The profile support area in the feed zone is equipped with a lift/lower roller. Remnant cut from 75 mm, profile-dependent. Clamping pressure reduction horizontally and vertically with 6 pressure regulators. Intermittent spray device with level monitoring and automatic shut-off, 1-liter lubricant reservoir. Noise protection package—frame interior lined with soundproofing mats. Two extraction nozzles Ø 100 mm. Safety guard over both the saw head and the feed unit. 740 mm roller conveyor with intrusion guard on the infeed side, 450 mm pertinax tabletop with intrusion guard on the outfeed side. Dsdpfjy Dtpmsx Aiwskl MG 3 Chip Extraction Dust and chips are collected in a 172-litre metal container, which is removable for easy emptying. Two outlets with 100 mm hose adapters (no extraction hose included). 3.0 kW drive, 400 V, 50 Hz, three-phase motor. Max. air flow rate 2,600 m³/h, vacuum 30 mbar, with fan snail housing above the extractor. Large filter surface, pneumatic shaker unit for filter cleaning, filter class M. Max. noise level 80 dB(A). Selector switch for continuous operation or saw-controlled operation (no power cable). Painted: RAL 7035 / 9016.

Condition: used, -External dimensions: 2600x2900x2110mm -Internal dimensions: 2400x2700x1950mm -Wall thickness: 80 mm -Temperature: -2+8 ºC / -18-23 ºC -Refrigerant: R452A -Climate class: 5 -Pre-assembled refrigeration unit on the panel -Automatic condensate water evaporation -Internal lighting -Panel finish in pre-painted sheet metal, specially designed for food use, light grey colour -300mm gaps with panels of 300, 600, 900 and 1200mm -Panel interlocking system with double-latch hooks -Rounded doors and interior corners cut at 45º -Ergonomic handle with lock and safety release system -Pressure balance valve -Stainless steel floor with non-slip surface -Reversible door, self-locking at 90º, available in 2 sizes, with clear opening of 600 and 700mm Dsdpfsx Eyhfox Aiwekl -Hinges with sloped system -Insulation in CFC-free polyurethane, high-pressure injected, with density 41 Kg/m³

Condition: used, Year of construction: 2021, Overview This rotary cold glue labelling machine was manufactured in 2021 by Germany GERNEP. The machine is designed for cold glue labelling of glass bottles, primarily in the beer industry. It is equipped with one cold glue labelling aggregate and is prepared for the installation of an additional unit. The system features a mechanical bottle table drive (control cam system) and a Krones glue pump for consistent label application. Technical data Capacity: approx. 5,000 bottles/hour Speed range: approx. 1,000 – 6,000 bottles/hour Formats: 0.33 L / 0.5 L glass bottles Application: Labelling of glass bottles (beer) Configuration: Rotary machine with 1 cold glue labelling aggregate (prepared for 2nd unit) Label positions: Body / wrap label, neck / chest label Utilities: 400 V / 50 Hz / GND / N Scope of Delivery Labelling machine | GERNEP | Labetta 4/3/8 480 1A | 2021 | Rotary cold glue labeller with 1 aggregate (prepared for second unit) Glue system | Krones | Glue pump Control system | GERNEP | Touch panel Dedpfxjyzcyvs Aiwskl

Condition: used, Year of construction: 2019, Overview This rotary cold glue labelling machine was manufactured in 2019 by Germany GERNEP. The machine is designed for cold glue labelling of glass bottles, particularly in the wine industry. It is equipped with two cold glue labelling aggregates for the application of body, neck ring and back labels. The machine features a servo-driven bottle table and a Krones glue pump for precise label application. Technical data Capacity: approx. 5,000 bottles/hour Speed range: approx. 1,000 – 5,500 bottles/hour Formats: 0.75 L Bordeaux (H=309 mm, Ø74 mm) 0.75 L Schlegel (H=330 mm, Ø76 mm / H=350 mm, Ø78 mm) 1.0 L Schlegel (H=309 mm, Ø89 mm) 0.75 L Burgunder (H=297 mm, Ø82 mm) Application: Labelling of glass bottles (wine) Configuration: Rotary machine with 2 cold glue labelling aggregates Label positions: Body (front), neck ring, back Utilities: 400 V / 50 Hz / 3 Phase / N / PE Scope of Delivery Labelling machine | GERNEP | Labetta 4/3/12 784 2A SD | 2019 | Rotary cold glue labeller with 2 aggregates Glue system | Krones | Glue pump Control panel | GERNEP | Touch panel Dedpfeyzcycjx Aiwjkl

Condition: used, Year of construction: 1971, functionality: fully functional, machine/vehicle number: 3229, type of input current: three-phase, rotational speed (min.): 35 rpm, rotational speed (max.): 70 rpm, input voltage: 500 V, For sale is a robust metal circular saw from the manufacturer Eisele, model VMS III. This machine is a classic cold circular saw designed for industrial use and stands out due to its solid construction and durability. Ideal for workshops, metal fabrication, or locksmith operations. Technical data: • Manufacturer: Eisele • Type: VMS III • Year of manufacture: 1971 • Machine number: 3229 • Rotational speeds: 35 / 70 rpm • Voltage: 500 V • Motor power: approx. 1.8 to 2.6 kW • Frequency: 50 Hz • Version: Three-phase current • Equipped with a vise and mechanical feed Dedpsy Dc I Sofx Aiwokl Condition: Used condition, appropriate for its age. The machine is of heavy-duty construction and well-suited for refurbishment or immediate use. Visually with signs of wear.

Condition: good (used), Year of construction: 1980, functionality: fully functional, Type VMS III - PV Dksdpfx Aiey Dcmbjwel Machine No. 8518 Year of construction 1980 Technical data : 2-stage saw motor 2.0 / 2.6 kW Saw blade 350 mm 4 cutting speeds 8.5 / 17 / 34 / 68 rpm Clamping range, flat / round 200 / 120 mm Feed length, single stroke 5 - 600 mm Feed length, double stroke 1200 mm

Condition: excellent (used), mileage: 7,575 km, power: 90 kW (122.37 HP), first registration: 06/2023, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,640 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, total length: 6,250 mm, total width: 2,090 mm, permissible axle load (axle 1): 2,100 kg, permissible axle load (axle 2): 2,250 kg, Year of construction: 2023, Equipment: ABS, AdBlue, Apple CarPlay, Bluetooth, airbag, cruise control, electric window regulation, electronic stability program (ESP), full service history, navigation system, onboard computer, power assisted steering, power mirror, soot filter, traction control, = Additional options and equipment = - Alarm system - Outside temperature display - Cup holder - Passenger airbag - Tachometer - Third brake light - Electric front windows - Driver’s seat height adjustment - Tinted glass - Particulate filter - Radio/CD player - Spare wheel - Disc brakes - Side doors - Immobilizer = Remarks = Refrigeration unit brand: Cold Car = Further information = Technical information Number of cylinders: 4 Engine displacement: 1,968 cc Maximum front axle load: 2,100 kg Maximum rear axle load: 2,250 kg Weights Unladen weight: 3,145 kg Payload: 355 kg Gross vehicle weight: 3,500 kg Maintenance APK (Technical Inspection): New TÜV upon delivery History Booklets: Available (dealer serviced) Condition Technical condition: Very good Visual condition: Very good Damages: None Warranty Warranty: 3 months Dkedpfsy A Sg Iex Aiwsl = Company information = Nidro Cars Holland is located in the centre of the country and is your trusted address for purchasing a car, van, or truck. The indicated price is the 'internet take-away price.' For questions or to schedule a test drive, please contact us: SEE OUR COMPLETE STOCK AT All types of trade-ins are welcome! (Our listings are created with great care; however, no rights can be derived from their content.)

Year of construction: 2017, condition: used, functionality: fully functional, GENERAC Light Tower V 20 — Year of manufacture 2017 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Condition & Notes: - Condition: Used, ex-rental, regularly serviced Dodpjy A E Ewofx Aiwokl - Functionality: Fully operational - Product photos to follow — please contact us for current images - On-site inspection in 37574 Einbeck available by appointment Price EUR 9,900 plus VAT | EXW Einbeck | Delivery upon request

Year of construction: 2015, condition: ready for operation (used), Saw blade diameter: 400mm, miter range: +/-90°, max. round material cutting capacity: 130mm, max. square material cutting capacity: 120mm, max. flat material cutting capacity: 305mm/20mm, machine dimensions X/Y/Z: approx. 1050mm/900mm/1850mm, weight: approx. 850kg, on-site inspection is possible. Dkjdpoy Ax Ursfx Aiwsl