Cold Circular Saw

MEP TIGER 352 SX EVO

Condition: used, Year of construction: 2019, MEP Tiger 352 SX EVO Cut Off Saw, 4000mm Roller Conveyor with Length Stop, Weight 410kg. S/No. 562821/31B (2019) Lasdpfx Aszr I Ahspmsf Location: These lots are located in Burton-on-Trent, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Year of construction: 2023, operating hours: 11 h, condition: as good as new (ex-display), machine/vehicle number: MA0144_1922, Exhibit: Compressor Kaeser SX 8 (10 bar) with SIGMA CONTROL 2 Year of construction: 2023 Operating hours: 1 Bh Techn.Daten: Volume flow at 10 bar: 0.67 m³ / min Motor power: 5.5 kW Electrical connection: 400 V / 3/50 Hz Dimension W x D x H: 590 x 632 x 970 mm Weight: 155 kg Connection compressed air: G 3/4 " Laodpfx Apsh Ey Rcjmsf Sound pressure level: 64 dB (A) Visit our store in Erlangen. On more than 450 square meters of exhibition space you will find a large number of used and new compressors

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, SEMI-AUTOMATIC CIRCULAR SAW MEP TIGER 352 SX EVO - Blade rotation at 4 speeds (15/30/45/90 rpm) - Rotating table mounted on central spindle and axial bearing - Cutting head feed on double linear guideway - Mechanical stops at -45°, 0°, +45°, and +60° with locking device at any angle - User interface with display Lasdjxdr Rtjpfx Apmjf

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm saw blade turning speeds 15+30+45+90 U/min total power requirement 1,8/2,5 kW weight of the machine ca. 0,41 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Electro-pneumatic - semi-automatic vertical circular saw with micro Processor control for miter cuts from 60° left to 45° right. With Linear guide of the saw head. Lasdpfx Apefg Rlbomsf •new system with head sliding vertically on linear guides Upstream slide rails with recirculating balls. •Double gear set for high transmission performance •4 speeds 15/30/45/90 rpm •Vice opening 190 mm • Stroke of the saw head can be programmed directly from the control panel for adjustment to the cutting material •Pneumatic vertical vice •Saw blade HSS DMO 5 Æ 350x32x2.5 for solid and profile material •Vise with counter-clamping device for double workpiece clamping •Base with removable coolant tray •Chip clearing brush •Length stop for cuts of the same length •Material support arm, at the same time connection option for roller conveyor/ loading side •Turntable with additional central axis

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, new KAESER SXC8 screw compressor system (10 bar) available immediately with integrated refrigeration dryer with 215 liter compressed air tank with electrically level-controlled condensate drain with Sigma Control 2 control Year of construction: 2022 Operating hours: 1.5 operating hours Technical data: Volume flow at 10 bar: 0.67 m³ / min Nominal power drive motor: 5.5 kW Electrical supply: 400 V / 3 ph / 50 Hz Dimensions W x D x H in mm: 620 x 980 x 1480 Weight: 260 kg Compressed air tank: 215 liters Compressed air connection: G 3/4 " Sound pressure level: 69 dB (A) Ledpfxjhhiw No Apmoaf Refrigeration dryer pressure dew point: 6 ° C Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Condition: new, saw blade diameter 350 x 32 mm Lajdpfx Ajxabd Iopmjf capacity degrees: round 1 mm capacity degrees: round 110 mm capacity 60 degrees: round .0 mm capacity degrees: square 95 x 95 mm capacity degrees: square 95 x 95 mm capacity 60 degrees: square x mm capacity degrees: flat 180 x 95 mm capacity degrees: flat 125 x 95 mm capacity 60 degrees: flat x mm

Condition: as good as new (ex-display), A fully hydraulic demonstration bending machine WIEGAND with NC- 10 control system manual or automatic bending mode automatic mode: Close upper beam, bend set angle, open upper beam bending beam or upper beam manually adjustable according to sheet thickness Ljdpopgmqiofx Apmsaf adjustable opening width of upper beam backgauge manually adjustable CE standard documentation bending length: 2500 mm bending capacity: 2,5 mm max. bending angle: 0 - 120°. backgauge manually adjustable min/max: 60/1000 mm power: 3,0 kW weight: 2500 kg Tech. Data and dimensions: Errors excepted Further tech. Data see pdf. Document

Condition: new, Year of construction: 2025, machine/vehicle number: MASM13T, Stock machine available immediately New Kaeser SM 13 T - 10 bar screw compressor with integrated refrigeration dryer with ECO-Drain (level-controlled condensate drain) Control: SIGMA CONTROL 2 Year: 2025 Pressure: 10 bars Rated power: 7,5 kW Delivery quantity at 10 bar: 1.08 m³/min Sound level: 65 dB(A) Compressed air outlet: 3/4" Dimensions length x width x height: 630 x 1090 x 1100 mm Weight: 315 kg Lodpjix Akpefx Apmjaf Operating hours: 0 hrs Visit our store. We always have a wide range of new and used compressors in stock!

Condition: ready for operation (used), Max. working width: 3060 mm Laedpfx Apexwnltjmof For sheets (at 40 kg strength) up to: 4 mm Min. bending radius: sheet thickness x 1.25 Min. inside flange height: sheet thickness x 6 Upper beam opening width: 220 mm Lower/bending beam adjustability: 90 mm Max. bending angle: 180° Stroke speed down/up: 40/60 mm/s Hydraulic drive: 380 V, 7.5 kW Weight: 4.3 t Required space: 4150 x 1800 x 2500 mm

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, cutting height (max.): 260 mm, cutting width (max.): 260 mm, cutting range round steel at 45°: 260 mm, cutting speed: 100 mm/min, saw band length: 1,900 mm, Manufacturer: Jaespa Model: W260 HA Lodexvd Tqopfx Apmsaf Year of manufacture: 2018 Technical data: ----- - Bandsaw blade: 3,660 x 27 x 0.9 mm - Drive power: 1.5 kW - Cutting speed: 15 - 100 mm/min - Max. cutting capacity (round): 260 mm - Max. cutting capacity (square): 260 x 260 mm - Infinitely variable angle adjustment +/- 45° - Hydraulic material clamping - Hydraulic feed with automatic shut-off - Automatic bow lifting after cutting - Coolant pump - Frequency-controlled band drive - Weight: 420 kg - Dimensions LxWxH in mm: 1,900 x 750 x 1,220 Accessories: ----- - Roller conveyor 1,500 mm