Used Cold Light Source for sale (20,541)

Condition: used, Year of construction: 2017, Automatic cold press Manufacturer: CMB Type: PFR-CCL Year of manufacture: 2017 Technical data: Motorized loading table 3,500 x 1,600 mm for manual assembly of the plates and automatic loading into the press on the 1,600 mm side. Structure made of welded steel profiles. Devices for adjusting the working height to compensate for unevenness in the floor. Steel rollers. Foot switch. PRESS Plate size: 5,500 x 1,600 mm Loading side: 1,700 mm Stroke: from top to bottom Opening: 450 mm Cold press The plates are made of steel sheet and attached to a steel frame structure. Maximum pressing force: 160 tons. Gkjdezuzw Dspfx Ak Ueb Specific pressure (on 100% of the area): 1.82 kg/cm2 Specific pressure (on 80% of the area): 2.27 kg/cm2 Pressure cylinder: 12 x 80 mm Auxiliary cylinders: 6 x 50/30 mm Power supply: 400 Volt EU/50 Hz/3 PH. + G AUTOMATIC LOADING and UNLOADING of the plates on the lower plate, on the 3,500 mm side. The transport is carried out via a motorized MYLAR belt. The belt is activated by 2 rollers, one of which is located at the entrance and one at the exit of the press. The rollers are driven by a motor with a chain that slides on special guides. The Mylar belt rotates around the lower plate, which rests on special side supports. The belt rotates on 2 rollers, which are located at the entrance and exit of the press. The ends of the MYLAR belt are attached to special rods with devices for tensioning the MYLAR. The upper plate is covered with a Mylar film. The press plates consist of thick steel sheets that are welded to the frame structure. HYDRAULIC UNIT with pump, oil tank and valves for operating the pressure cylinders and auxiliary cylinders that move the upper plate. The hydraulic control unit is located in the upper part of the press to facilitate maintenance. CONTROL PANEL with buttons and switches. Pressure control manometer on the front of the press. UNLOADING MOTORIZED ROLLER TABLE 2,000 x 1,600 mm The unloading table is located at the exit of the press for manual unloading of the pressed plates. Exit side from the press: 1,600 mm. Note: The loading table of the press with the dimensions 3,500 x 1,600 and the unloading table with the dimensions 2,000 x 1,600 are shorter than the press table with the dimensions 5,500 x 1,600, as the press was installed in a line. Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 1976, functionality: fully functional, Cold former double stroke, cold press Gkodpfx Aezwpxbek Uob Max. dimensions for standard bolts: M12 x 150 mm Max. wire cutting length: 180 mm Max. output: 105 pieces/min The machine can be viewed whilst powered on. Weight: 10 t

Condition: good (used), Year of construction: 2016, operating hours: 100 h, functionality: fully functional, total width: 6,300 mm, total length: 15,000 mm, total height: 4,000 mm, overall weight: 2,000 kg, type of cooling: air, Equipment: type plate available, The chamber is in perfect condition and has barely been used. It is currently disassembled, with all its components included (walls, doors, lighting fixtures, ceiling, evaporator compressors). It does not include the refrigerant gas. Everything can be loaded onto a trailer. Gsdpozwmwnsfx Ak Uskb

Condition: used, Year of construction: 1994, Cutting diameter 520 mm Blade length 7239 mm Gjdpfswqz Azjx Ak Uokb Cutting width 1.3 mm POSIMOD control Cutting area square 520 x 520 mm Feed length 500 mm Feed length multiple 4500 mm Smallest section length 6 mm Remaining piece length min./max. 10 / 100 mm Cutting speed 20 - 130 m/min Saw band dimensions 7239 x 50 x 1.3 mm Saw motor 5.5 kW Total power requirement 10.0 kW Machine weight approx. 3.8 tons Machine dimensions L x W x H 3.42 x 2.30 x 2.40 m - 2-column-guided - Accessories: Roller feeder 2500 mm long, chip conveyor, cooling system

Condition: used, heavy-duty saw head with a robust base and material clamp for non-ferrous metals and aluminum, Gjdpjzwhd Ajfx Ak Uokb saw blade 350 mm, more powerful motor, with pneumatic feed and 2 pneumatic material clamps.

Year of construction: 2022, condition: new, New! Roof cutout dimensions: 2,350 x 13,000 mm Gedpfx Akslrtdbj Uskb Light panel order dimensions: 2,550 x 13,311 mm

Condition: new, input voltage: 400 V, welding current at 60% duty cycle: 400 A, welding current at 100% duty cycle: 300 A, welding current (min.): 25 A, welding current (max.): 400 A, Lorch iQS series – Top-level welding for maximum productivity in industrial manufacturing Maximum performance and reproducible quality: The Lorch iQS series is a powerful, digitally networked MIG-MAG welding system for demanding industrial applications. The newly developed inverter generates an exceptionally stable and smooth arc. All parameters can be continuously adjusted to the optimal operating point – for high-quality, reproducible welds on steel, stainless steel, and aluminum. The iQS is suitable for both manual welding and robotic integration, providing a future-proof platform for modern manufacturing companies. Less spatter, less rework: The innovative Smart Process Control Engine enables continuous development of the available welding programs. New processes and functions can be transferred to the system, ensuring that users always work with the latest technology. The integrated RCS module improves short-circuiting in particular: the process runs more cleanly, the weld pool is easier to control, and spatter formation is reduced. This increases weld quality and reduces time-consuming and costly rework – especially on thin sheets under 3 mm. Lorch Speed processes for higher productivity: Depending on the configuration, proven Lorch processes such as SpeedPulse XT, SpeedArc, SpeedTwin, SpeedRoot, SpeedUp, and SpeedCold are available. They enable higher welding speeds, better penetration, attractive weld bead surfaces, and precise process control. Users receive a flexibly configurable solution for a wide range of materials, weld geometries, and welding positions. Intuitive operation with Smart Cockpit: The robust 7-inch Smart Cockpit can be operated via touchscreen or rotary control – even with welding gloves. A clear menu guides users, displaying only suitable material, wire, and gas combinations, thereby reducing incorrect settings. Important parameters can be accessed immediately via the configurable QuickAccess menu. Current values are visualized during welding; subsequently, the Hold function indicates whether the specified parameters have been met. Networked, robust, and easy to service: WLAN and Lorch Connect enable the recording, documentation, and analysis of welding data, as well as updates and future function upgrades. The encapsulated air duct, the dust-protected electronics area, and the modular design simplify maintenance and ensure uncomplicated service. Optionally, the robust MF-09 wire feeder complements the system with 4x4 drive, a quick-change system, and various chassis and transport options. Gkjdpfxezwfgbs Ak Ujb Technical performance variants: The iQS 3 offers a welding range of 25 to 320 A, and the iQS 5 offers a range of 25 to 400 A. Both models operate on 3-phase power supplies from 380 to 480 V, have an IP23S protection rating, and a robust 4x4 wire feed unit. The equipment and scope of delivery depend on the chosen configuration. Document 1: technical details IQS series (EN) Document 2: brochure IQS series (EN) Document 3: technical data IQS series (DE) Document 4: brochure IQS series (DE)

Year of construction: 1975, condition: excellent (used), daylight width: 70 mm speed: approx. 15 m/min working direction: any work roll diameter: 80 mm Gkodop E Efvspfx Ak Ujb

Year of construction: 2000, condition: excellent (used), daylight width: 170 mm speed: approx. 25 m/min working direction: any work roll diameter: 120 mm barrel length: 150 mm backup rolls: backup block/chain Gsdpfjp E Eglex Ak Uekb

Condition: excellent (used), strip width: 6 - 200 mm Gkedpjp E Ed Rsfx Ak Usb strip thickness: 6 – 0,5 mm speed: max. 100 m/min working direction: any work roll diameter: 250 mm barrel length: 250 mm roll core for rolling rings: 190 mm

Condition: used, empty load weight: 5,560 kg, maximum load weight: 29,440 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 07/2019, next inspection (TÜV): 06/2027, loading space length: 13,642 mm, loading space width: 2,480 mm, loading space height: 2,674 mm, total length: 25,500 mm, total width: 40,000 mm, total height: 140,400 mm, suspension: air, tire size: 385/65 R22,5, Year of construction: 2019, front tire size: 385/65 R22,5, rear tire size: 385/65 R22,5, emission class: none, ABS / EBS, axle manufacturer SAF, anti-splash guard, disc brakes, coil well 8,200 mm, plug-in side boards, 3 rows of aluminum slats, spare wheel holder with 1 wheel, air suspension with lift and lower function, lifting axle on axle 1 and 3, toolbox 1, Edscha tarpaulin, 2x7 + 15-pin electrical connections, 4-fold twist lock, continuous lashing eyelets in the outer frame, 16 pairs of lashing eyelets, 5 pairs of anchor eyelets. Gedpfxjzv U Ewj Ak Uekb

Condition: used, total width: 1,100 mm, shelf height: 4,130 mm, Technical specifications for the pallet racking upright: Racking system: Redirack Included in the scope of supply: 1x pallet racking upright, used Material color: light blue Gkjdpezul Slefx Ak Ueb Frame profile: S Profile dimensions: C 83 x 50 x 15 x 1.75 mm Includes cross and diagonal braces, and base plates The uprights are pre-assembled (welded framework) Height: 4,130 mm Depth: 1,100 mm General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: new, height / mm working width / mm distance to reflector / mm SICK safety light curtains C4000 C40S-1301AA030 + C40E-1301BH030 Gedpfx Asymqrvek Ujkb Transmitter: C40S-1301AA030 Receiver: C40E-1301BH030 Operating range: 0 - 5 m Condition: New

Condition: used, height 1500 mm working width / mm distance to reflector / mm Safety light curtains Leuze electronic CT90 + CR90 1500/A Set Sender + recipient Set: 1x transmitter - CT90-1500/A 1x receiver - CR90-1500/A Resolution: 90mm Protective Field Height: 1500mm Gkjdpfxoy Sumvo Ak Ueb Range: 0-18m Rating: IP65

Condition: new, height / mm working width / mm distance to reflector / mm SICK DETEC 4 CORE safety light curtains C4C-SA09010A10000 + C4C-EA09010A10000 / NEW Gsdjyn R R Iepfx Ak Uskb Transmitter: C4C-SA09010A10000 Ident No.: 1211475 Receiver: C4C-EA09010A10000 ID No.: 1211515 Condition: New

Condition: new, Year of construction: 2017, height / mm working width / mm Gjdpfeyn R Tvex Ak Uokb distance to reflector / mm

Condition: used, height 1500 mm working width / mm distance to reflector / mm Safety light curtains Leuze electronic CT90 + CR90 1500/A Set Sender + recipient Set: 1x transmitter - CT90-1500/A 1x receiver - CR90-1500/A Resolution: 90mm Protective Field Height: 1500mm Range: 0-18m Godpfoy Sup Djx Ak Uokb Rating: IP65

Condition: new, Year of construction: 2017, height / mm working width / mm distance to reflector / mm Gksdpfxjyn R Ruj Ak Uob

Condition: new, saw blade diameter: 550 mm, sheet thickness aluminum (max.): 4 mm, total length: 1,130 mm, total width: 980 mm, total height: 1,430 mm, cutting range round steel at 90°: 155 mm, cutting range round steel at 45°: 130 mm, rotational speed (min.): 3,580 rpm, rotational speed (max.): 3,580 rpm, The Gerd Wolff AC 550 is an automatic aluminium cutting machine, manufactured in Turkey by a renowned producer for our distribution brand "GERD WOLLF Maschinenfabrik". CUTTING CAPACITY: Cutting range 90° round: 155 mm Cutting range 90° square: 155 x 155 mm Cutting range 90° rectangular: 260 x 200 mm Cutting range 45° round: 130 mm Cutting range 45° square: 130 x 130 mm Cutting range 45° rectangular: 180 x 200 mm Standard equipment: - Indexing positions for 15° – 22.5° – 30° – 45° – 67.5° - Fixing handle for locking at intermediate angles - Adjustable cutting speed for various profile types - Saw cover with safety switch - Belt-driven saw - Two-hand safety operation - Easy-to-replace saw blade - 2x pneumatic vertical clamps with pistons - 1x air blow gun Optional equipment: - Hydrocheck – hydraulic speed adjustment for aluminium profiles - Cooling system for aluminium cutting - Auxiliary conveyor with rulers Gjdjxb Urnepfx Ak Uskb

Condition: new, saw blade diameter: 400 mm, sheet thickness aluminum (max.): 4 mm, total length: 720 mm, total width: 760 mm, total height: 1,330 mm, cutting range round steel at 90°: 120 mm, cutting range round steel at 45°: 100 mm, rotational speed (min.): 3,000 rpm, rotational speed (max.): 3,000 rpm, The Gerd Wolff AC 400 is an automatic aluminium cutting machine, manufactured for our sales brand "GERD WOLLF Maschinenfabrik" by a renowned producer in Turkey. Standard Equipment - Fixing points for 15° - 22.5° - 30° - 45° - 67.5° - Locking handle for securing at intermediate angles - Adjustable cutting speed for various profile types - Saw guard with safety switch - Belt-driven saw - Two-hand safety operation - Easily replaceable saw blade - 2 pneumatic vertical cylinders with clamps Gedpoxb Ur Ujfx Ak Uekb - 1 compressed air gun Optional Equipment - Hydrocheck – Hydraulic speed regulation for aluminium profiles - Cooling system for cutting aluminium - Auxiliary conveyor with measuring rulers

Condition: used, MIG MAG welding machine, gas-shielded welding system, MESSER LINCOLN, type MagStar 18 Serial No. 4210048, Year of manufacture approx. 1995 Output: 180 amps = 60% duty cycle 140 amps = 100% duty cycle Setting range: 8 power levels Mains connection: 400 volts, 50 Hz, 16 amp plug - Spot welding attachment - 2-roller wire feeder - 3 meter hose assembly with central connection - Welding gas pressure regulator Space required L x W x H: 1150 x 460 x 650 mm Gjdpfxjzugn Is Ak Uokb Weight: 100 kg In good condition

Condition: used, MIG MAG welding machine, gas-shielded welding unit CLOOS, type GLC 403 PA-TS Manufacturer's No. 8198, Year of manufacture 1994 Rated power 400 amps Power 400 amps - 60% duty cycle 310 amps - 100% duty cycle Adjustment range: stepless Connection hose package: 4.5 meters Mains connection: 380 volts, 50 Hz, 32 amp plug Godpfxozugnzs Ak Uokb - 2-cycle and 4-cycle welding unit - External wire feeder, type CK 72/5TSZK with 2-roller drive and 4.5-meter hose package - 4-meter hose package with central connection and EHRIG hand torch, type Senator-800-D - Water-cooled - Pressure gauge for gas cylinder - Welding unit equipped with 1 mm welding wire Space requirement L x W x H: 1250 x 600 x 1100 mm Weight: 300 kg Good condition

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Kasto Kastodisc M10 Vertical Circular Saw, Metal Cutting Saw Manufacturer: Kasto Type: Kastodisc M10 Metal Cutting Saw Year of Manufacture: 2009 Gksdpfx Aoztyldjk Ujb Condition: Used, very good, ready for demonstration Scope of Delivery: - Documentation - Coolant system - 1 x Saw blade (used) - Material stop, 1000 mm

Condition: used, machine/vehicle number: IC1479, Year of construction: 2021, operating hours: 2,091 h, load capacity: 1,200 kg, lifting height: 2,900 mm, fuel type: electric, mast type: duplex, construction height: 1,900 mm, battery voltage: 24 V, 5257567 Serial Number: 90635761 Gkedpfjzv A Uaox Ak Usb Battery Details: 24v 166ah COLD STORE

Condition: used, machine/vehicle number: IC1474, Year of construction: 2021, operating hours: 653 h, load capacity: 1,200 kg, lifting height: 3,200 mm, fuel type: electric, mast type: duplex, construction height: 1,915 mm, battery voltage: 24 V, 5257564 Serial Number: 90627693 Battery Details: 24v 166ah Gedpfjzv A T Asx Ak Uokb COLD STORE