Used Coiler for sale (204)

Condition: used, Year of construction: 2019, controller manufacturer: Sonstige, controller model: , _____ Description: Year of manuf. : 2019 Control : Sonstige Double unwinding reel with drive Design:Short design Band width min./max.:230 – 520 mm Coil weight max.:2 × 30 kN Number of reels:1 Coil outer diameter min./max.:1,500 – 2,000 mm Spreading range min./ max.:460 – 525 mm Coil delivery:Industrial truck Reel loading:From the front (operating side) Coil unwinding:From the underside of the coil Kedpfx Ajycnf Soh Ejdt Material:Aluminium, soft Strip thickness min./max.:0.8 – 1.2 mm Tensile strength (Rm) min./max. :100 – 250 N/mm² Strip cross-section max.:600 N/mm² Straightening capacity:See straightening diagram Strip speed min./max.:2 – 10 m/min Strip infeed height above floor: 2,100 mm Degree of automation:Fixed / ± XXX mm Operating mode:Jog mode on sight system parameters System stroke rate:45 rpm Working direction:Right–left, front loading with forklift truck Flatness of installation site:± 15 mm Connection voltage:400 V, 50 Hz Ambient temperature:20 – 40 °C Compressed air connection:5 bar reel :Double reel with drive :Spreading :- Manual toggle lever system with hand crank :Coil limitation :22 November 2019 :22 November 2019 :- Single arms, manually adjustable according to scales, fixed at the front via :quick-release lever and at the rear via clamping screws :Brake/drive :- 2 frequency-controlled asynchronous motors :- 2 dual-circuit safety air pressure disc brakes :Swivelling :- Manual with 180° locking via pedal :Pneumatic pressure rollers with rubberised rollers at the top :mounted on brackets. :Hydraulic spreading :- Hydraulic spreading instead of manual spreading with hand crank :- Hydraulic unit with valves and piping mounted on the reel head :Belt pull-off and belt feed Belt loop :- Control via ultrasonic sensor/laser on the unwinding side

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2010, Equipment: CE marking, TECHNICAL SPECIFICATIONS DOUBLE MANDREL DECOILER MILLUTENSIL TYPE SL MD 600: Model: SL MD 600 Type: 600x400 Kdjdpfsyt Eldsx Ah Est Serial number: SM2-0043 Year of manufacture: 2010 Max. load per mandrel: 600 kg Max. strip width: 400 mm Max. strip width with arms: 300 mm Min. opening: 360 mm Max. opening: 620 mm Revolutions per minute: 16 Installed power per mandrel: 1.1 kW Voltage/frequency: 400 V / 50 Hz Auxiliary voltage: 24 V Weight: 1,000 kg Machine is in excellent condition. Complete with user manual and CE conformity declaration.

Condition: good (used), Year of construction: 2006, coil weight: 500 kg, Millutensil SLMD 500. Kdodpsu A T Hzofx Ah Eet Double decoiler / double rewinder. Capacity load: 500 kg x 2. Inner diameter min 350 mm max. 600 mm. Strip width up to 300 mm. Outer diameter max. 1600 mm. High frequency inverter Danfoss. Sensor for loop control. Dimension 2000 mm x 2000 mm height 1800 mm. Made in Italy. More coilers, and presses on stock, Bruderer, Schaal, Mabu, Bihler, Schuler, Amada, San Gimignano, Kaiser, EBU...

Condition: good (used), functionality: fully functional, Motorized decoiler, manufacturer SOPREM Load capacity: 200 kg Coil diameter: 900 mm Maximum strip width: 220 mm Expanding range: approx. 240 - 550 mm Kdsdpfxeztknvs Ah Ejt

Condition: used, Decoiler and straightener, sheet uncoiler, sheet straightener, coil unwinder, feeder, used machine Overall dimensions: Width: 2000 mm Depth: 900 mm Height: 1500 mm Weight: 636 kg Decoiler coil diameter range (min–max): 360–520 mm Kdjdpfx Ajybazpjh Eot Electrical data: 400V Straightening width: 205 mm Roller diameter: approx. 35 mm Lower roller set: 4 pcs Upper roller set: 3 pcs

Condition: good (used), Year of construction: 1985, Decoiler for unwinding rolls of sheet, e.g. zinc. Brand: Kader BV Type: Geska 4 Year of construction: 1985 Engine: 0.25 kW Mains voltage: 380 V Rear roller diameter: ± 450 mm Ksdeqctq Eepfx Ah Eodt Machine is in very clean condition.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: CNC control, degree of automation: automatic, actuation type: electric, For sale: lightly used sheet metal rewinding machine SVM-100, designed for automatic rewinding of sheet metal from large coil rolls into smaller rolls of 25m2 (1250*20,000 mm). The machine was manufactured in 2024, has been used very little, is in excellent technical and visual condition, and is fully ready for operation. It is an excellent solution for companies that produce roofing materials or other sheet metal products supplied in rolls. The machine automatically: - Unwinds the sheet metal from the coil up to 1 ton. If you want to rewind from 2-5 ton coils, an automatic unwinding unit is required to feed the sheet metal. - Winds the sheet metal into a roll. - Cuts the sheet to a specified length. - Allows the roll to be wrapped with stretch film. - Applies protective film to the surface of the sheet metal. The machine is connected – it can be inspected and tested. Technical specifications: Manufacturer: Foldsolutions / UAB Pakservisas Model: SVM-100 Year of manufacture: 2024 Made in: Lithuania Operating parameters: Sheet metal width: 1230–1260 mm Sheet metal thickness: 0.4–0.6 mm Maximum roll length: 20 m Roll diameter: approx. 300 mm Equipment: Automatic sheet metal winding Kdedpozibwgsfx Ah Eot Sheet metal cutting to a specified length Automatic roll packing process with stretch film Option to use protective film on the sheet metal Integrated length measuring encoder Touchscreen control panel Manual and automatic operating modes Pneumatic cutting system Adjustable operating speeds Length calibration function for precise production Emergency stop system Technical data: Electrical power: 400 V / 50 Hz / 3 phases Power: 2.6 kW Required compressed air pressure: 0.65 MPa Air consumption: 0.3 m³/min Dimensions (L × W × H): 2555 × 1730 × 1800 mm Weight: approx. 600 kg Application: Ideally suited for roofing materials, facade, sheet metal products, sheet metal processing companies, and other manufacturers who require fast, accurate, and safe preparation of sheet metal rolls for transport or storage. If you have any further questions, we will be happy to answer them.

Condition: new, functionality: fully functional, Decoiler for up to 150 kg coil weight, fixed rotation speed of 10 rpm. Kdedpfez Aybwsx Ah Eot

Condition: used, Year of construction: 1988, gebraucht 1988 070009 prompt, Zwischenverkauf v Deutschland Kdedpowirq Tofx Ah Est 1600 € 1 400 mm 700 mm 1500 mm 2050 mm 820 mm 1000 mm with brake with 2 spare mandrels

Condition: used, Year of construction: 1998, sheet width:130 mm coil weight:0,150 t coil internal dia.:300 mm Kdodsh Ra I Tepfx Ah Eot coil external diameter:1000 mm dimensions of the machine ca.:0,75 x 1,50 x 1,70 m volt:230 V total power requirement:0,25 kW weight of the machine ca.:0,3 t Motor-driven Decoiler with mechanical central expansion, stepless coil speed, tip switch, emergency cut-off.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2001, laoding capacity: max. 200 Kg. coil outside diameter: max. 1.000 kg. coil innert diameter: 210 - 500 mm strip metal width: max. 200 mm Kedpfx Aezlrvfsh Ejdt speed: 23 U/min.

Condition: good (used), Offer 25475 Manual double unwind/rewind reel Technical data: - Coil weight, left + right, up to approx. 1 t - Coil width, each side, up to approx. 300 mm - Coil inner diameter, approx. 380 to 500 mm - Coil outer diameter, up to approx. 1250 mm Ksdjzkhbnopfx Ah Eodt - Arbor height, approx. 750 mm - Space requirement, approx. W 1250 x D 900 x H 1300 mm - Weight, approx. 200 kg

Condition: good (used), Coil reel, unwinding reel, winding reel Load capacity: 10 tons Spreading range: up to 508 mm Spreading mandrel length: 1500 mm Several units available Frequency inverter control Control cabinet has been newly refurbished. Hydraulic tensioning of the coil. The reel can be moved laterally using 4 rollers. Year of manufacture and manufacturer unknown. Kdodpfxsipx Ufe Ah Eot

Condition: excellent (used), functionality: fully functional, Year of construction: 1994, Load capacity: 150 kg Band width: max. 240 mm Coil diameter: max. 800 mm Spreading range: 320 ... 520 mm Kdodszi Ex Ijpfx Ah Eet Design: • Motorized drive • Loop control via contact switch on the bobbin base • Limiting disc at the rear • Limiting ring at the front • Manually adjustable brake • Potentiometer for start-up delay

Condition: used, functionality: fully functional, Year of construction: 2001, NOXON Schroeder + Bauer DPH 1400 Double Pallet Decoiler – Year 2001 Technical Specifications: Model: DPH 1400 Year of Manufacture: 2001 Serial Number: 167041 Tabe diameter: 1400 mm Max load: 3000 kg. Voltage: 400 V Frequency: 50 Hz Power Consumption: 0,75 kW Current: 14.2 A Weight: 1000 kg Strip pulling motor Loop control sensor Original documentation in English and schematics CE Certified Manufactured in Germany General Description: The DPH 1400 is designed for reliable coil unwinding from pallets, particularly suitable for large and heavy coils. With its robust construction and 1400 mm table diameter, it is perfect for demanding applications in metal forming, stamping lines, and automated feeding systems. Condition: Used, Fully functional Ready for immediate use Kodpfx Ahowpciyj Ejdt German origin, well-maintained We can assist with international shipping and loading. On stock stamping equipment from renowned brands Bruderer, Mabu, Schaal, Bihler, Soprem and more.

Condition: excellent (used), Year of construction: 2002, coil weight: 25,000 kg, coil width: 1,550 mm, sheet thickness (max.): 4 mm, strip width: max. 1.550 mm strip thickness: 0,4 - 4 mm coil weight: 25 t Kodpfjy Nxn Ejx Ah Esdt mandrel Ø: 508/610 mm coil OD: max. 2.000 mm speed: max. 135 m/min working direction: left-> right

Condition: used, functionality: fully functional, Year of construction: 1992, Ref. No.: Lg 35325 Single-sided decoiler PBK E 1200 Used, in good condition Year of manufacture: 1992 Technical data Load capacity approx.: max. 1,200 kg Strip width: max. 300 mm Expansion range: approx. 360 to 420 mm Kjdexn Tpropfx Ah Eodt Outer coil diameter: approx. max. 1,500 mm Without drive, with pneumatic brake. Expansion of the supporting segments is manual via hand crank over joints. Number of supporting segments: 4 Coil side guide via heavy-duty limiting arms, can be clamped using quick-release fasteners. Uncoiler stand in robust box-type design as a welded structure.

Condition: good (used), Year of construction: 2019, functionality: fully functional, Valmet RoboCoiler for automatic de-wiring of bales. There are 2 units. Each unit consist of a turntable, metal detection, cutting and spooling unit. CHARACTERISTICS ▪ Max. 140 balen/hr ▪ Bale length: 700 – 1000mm ▪ Bale width: 580 – 900mm Kodpfjzy Nlajx Ah Eedt ▪ Bale height: 350 – 650mm ▪ Bale weight: max. 333kg ▪ Wire diameter: 1.8 – 3.0mm ▪ Strength: 500 – 1250 N/mm2

Condition: used, sheet width 250 mm coil weight 2,5 t coil internal dia. 450 - 530 mm sheet thickness - max. 4 mm coil outside dia. 1400 mm total power requirement kW weight of the machine ca. 1000 kg Overall size 1,95 x 1,95 x 1,7 mm Kdjdoizxu Uopfx Ah Ejt

Condition: good (used), functionality: fully functional, Year of construction: 1996, coil outer diameter: 1,700 mm, coil width: 600 mm, rotational speed (min.): 17 rpm, overall weight: 750 kg, total length: 1,900 mm, total width: 1,600 mm, total height: 2,000 mm, - Hydraulic pump output: 0.75 kW Kdodpoy R Sv Eefx Ah Eot - Motor power: 2.2 kW

Condition: excellent (used), Year of construction: 1980, spool width: max. 1.600 mm spool ID: 150/250/400 mm coil weight: max. 4 t Kdodswzuwtjpfx Ah Eot coil OD: max. 1.250 mm year: approx. 1980

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, wire diameter (max.): 10 mm, The BLM GROUP E-FLEX is a fully automatic, all-electric, single-head CNC wire-bending machine designed to produce complex 3D wire parts directly from a coil. Key Capabilities Full Automation: It processes wire directly from a spool, seamlessly performing inline operations like straightening, cutting, chamfering, and bending.Dual-Direction Bending: The bending head features a double turret capable of rotating both clockwise and counter-clockwise. This layout allows it to use multiple bending technologies simultaneously to avoid impossible geometries. Continuous Operation: Engineered with a small physical footprint and all-electric axes, it is optimized for non-stop, 24/7 industrial manufacturing. Technical Specifications The system is built to handle heavy production environments with the following configurations: Parameter Specification Bending CapacityUp to Ø 8 mm (with Wire R=900 N/mm²) or Ø 10 mm (with Wire R=500 N/mm²)Control System5 CNC axes Kdedpfxezu Auwe Ah Eot Bending Angle0.1° to 240°Bending Radius 0.5 mm to Infinite Coiler Capacity Up to 1,500 kg Power Consumption22 kW maximum installed power (8 kW average drawn power)Machine Weight2,400 kg (5,291 lbs)

Condition: excellent (used), Year of construction: 2009, decoiler - expansion mandrel type: AE-050 strip width: 400 - 1.500 mm strip thickness: 0,5 - 3 mm coil weight: 20 t coil OD: max. 1.800 mm mandrel Ø: 508 mm year: 2009 Kjdpfx Ahoupg Scj Eodt

Year of construction: 1976, condition: used, Bihler winding machine AH-2 ready for operation. Kdedeh Nvnljpfx Ah Eot

Condition: excellent (used), round gutter roll forming line: 14 stations. manual de-coiler, precutting. automatic measurement. Dx53d quality working. Kdjdpfx Aszyythsh Eot input 333mm