Used Coiler for sale (210)

Condition: good (used), functionality: fully functional, Year of construction: 2002, coil weight: 5,000 kg, coil width: 1,500 mm, total length: 3,300 mm, total width: 1,500 mm, total height: 2,000 mm, power: 7.7 kW (10.47 HP), Decoiler, Coil size 1500 mm, max. load 5000 kg, inside dia. 430 - 530 mm, motor 7,7 KW, dimensions 330x150x200 cm, weight 2500 kg Lasdpfoyci Smsx Anuec

Condition: used, Year of construction: 2008, material width 600 mm coil weight 2 x 1,5 t coil internal dia. 370 - 630 mm coil outside dia. 1560 mm speed 12 U/min Power capacity 1,1 kW Weight 1,5 t Dimensions (WxDxH) 2,5 x 1,2 x 1,9 m double decoiler, swivellable Laedpfjv Svbisx Anuec with motor, manual expansion, coil loop control

Condition: used, Year of construction: 1995, material width 400 mm coil weight 2,0 t Laodpfx Aevuungenuec coil internal dia. 480 - 520 mm coil outside dia. 1500 mm with hydraulic auxiliary drive with mechanical lag brake, hydraulic centralized expansion, pneumatic snubber roll, coil loop control via contact plate min. material width 20 mm

Condition: used, Year of construction: 2001, material width 410 mm coil weight 2,0 t coil internal diameter 380 - 520 mm coil external diameter 1400 mm power requirement 2,2 + 1,1 kW weight of decoiler 0,7 t Lajdjvut Thepfx Anuec dimensions decoiler (WxDxH) 1,4 x 1,4 x 1,65 mm weight of the pulling device 1,15 t required space of the pulling device (WxDxH) 1,7 x 1,1 x 2,2 m Decoiler 2370 DFPS without drive, with pneumatic lag brake, hydraulic centralized expansion, pneumatic snubber roll pulling device / hydraulic threading device 235 D with infinitely variable drive, coild loop control via ultrasonic material thickness up to approx. 6,0 mm roll diameter approx. 160 mm

Condition: new, In addition to standing a PDF document, see the description of positions - Prices on request! RUCHSER standard offer with layout for a wooden window production with being milled Glass bar and screwed corner joints. Daily capacity approximately 15 Window Manufacturing consisting of: Item 1.0 - Item 107 850 000 RU-PWD-H1600/130/4 profile carriage double-sided Length 1600 mm, width 850 mm, height 2140 mm for horizontal position round and transport of Profile sections. 12 support arms each column welded to the column, 2 adjustable center column, Ledeytx Urepfx Anusac clear spacing of the support arms 130 mm, Depth of the support arms on each side 400 mm, Support arms covered with felt, with 4 plastic swivel castors, diameter 150 mm, of which 2 with stop means. Item 2.0 - Item 0150001 RU-M rotation - tilting table manually tiltable bearing surface 1300 x 1400 mm, with 4 plug extension 1000 mm long, including tool tray without weatherboard- ausspaarung. Item 2.1 - Item 5009-1 2 trays with 2 drawers (for RU-4, RU-2/4) Item 2.2 - Item 5062-1 Extract left and right 500 mm and up to 7000 mm folded down with one support leg Item 2.2 - Item 5012-1 Hinged extension tubes Length 700 mm (max. 3 pairs) Item 2.4 - Item 6125-2 Corner mounting fixture AoE attacks rectangular pneumatic lowered with clamping unit for 2 profiles mounted on RU-M Item 2.5 - Item 2069-1 tilting instead of manually, pneumatically operated Item 3.0 - Article 10.782 million RU-EW-2S two-sided vehicles in stock Storage capacity max. 36 piece sash L - shaped screw, length 1200 mm, Depth 800 mm, height 2200 mm, edition of Holme felted, 4 swivel castors, 2 with brakes Item 4.0 - Item 6600000 RU-KWI-1000 Commission cart unladen be nested, Length 1120 mm, width 1100 mm, working width 850 mm, height 1900 mm, Plant height 1500 mm, bearing capacity 750 kg mobile on 4 plastic castors, Diameter 150 mm, 2 with Stop device, 2 drawers on the left and right each 350 mm in length, max. 1800 mm and Height max. 2100 mm Item 5.0 - Item 740-300 RU-DH-F2 double reel cart for 2 rolls to roll size 620 x 350 mm (without coil) to roll size 800 x 350 mm (with coil) with 4 swivel castors, 2 with stop device Item 5.0a alternative to Item 5.0 - Item 744-200 RU-DH-F4, double coiler car for 4 wheels to roll size 620 x 350 mm (without coil) to roll size 800 x 350 mm (with coil) with 4 swivel castors, 2 with stop device Item 6.0 - Article 7.36 million RU-BW-1200-fog Cart with 16 divisions, length 1200 mm, Width 700 mm, height 1100 mm, with 2 shelves, mobile on 4 Plastic castors with a Diameter of 125 mm, 2 with stopper Item 7.0 - Article 10.0092 million RU-FMOG / K wing mounting rotary tilting table * for wings with attached bar and milled glass Bolt on corner joint. Rotary-tilting table with pneumatic tilting device and 6 piece sliding vacuum suction cups. Adjustment range in width from 4...

Condition: used, functionality: fully functional, Year of construction: 2001, NOXON Schroeder + Bauer DPH 1400 Double Pallet Decoiler – Year 2001 Technical Specifications: Model: DPH 1400 Year of Manufacture: 2001 Serial Number: 167041 Tabe diameter: 1400 mm Max load: 3000 kg. Voltage: 400 V Frequency: 50 Hz Power Consumption: 0,75 kW Current: 14.2 A Weight: 1000 kg Strip pulling motor Lasdpfxewpciyo Anujc Loop control sensor Original documentation in English and schematics CE Certified Manufactured in Germany General Description: The DPH 1400 is designed for reliable coil unwinding from pallets, particularly suitable for large and heavy coils. With its robust construction and 1400 mm table diameter, it is perfect for demanding applications in metal forming, stamping lines, and automated feeding systems. Condition: Used, Fully functional Ready for immediate use German origin, well-maintained We can assist with international shipping and loading. On stock stamping equipment from renowned brands Bruderer, Mabu, Schaal, Bihler, Soprem and more.

Condition: used, Unwinding and rewinding reel for coil material, HMS type BA 1.5-06/80 Machine No. Year of manufacture 1991 Coil weight max. 8000 kg Coil outer diameter max. 1600 mm (with loading carriage) Coil outer diameter max. 2000 mm (without loading carriage) Diameter of the coil running disk Ø 1700 mm Coil inner diameter, spreading range 460-520 mm Coil width, nominal width max. 630 mm Width of the spreading jaws 750 mm Height of the reel crown above the base plate 1500 mm - Drive of the reel crown via hydraulic motor with gearbox and gear - Pneumatic trailing brake on the reel crown TWINFLEX - Hydraulic operating brake - Hydraulic stop brake - Hydraulic spreading of the reel crown, centrally via wedge slide system - Hydraulic pressure arm with hydraulically driven double rocker roller - Coil loading carriage with 12 ton lifting capacity and 300 mm stroke Ljdpfx Anohx R Etsuoac - Reel on above-ground travel frame with motorized lateral travel drive - Hydraulic unit located nearby (also used for other functions on a conveyor system) - Without electrical control cabinet (or, there is an electrical control cabinet that supplied the entire conveyor system) Transport dimensions L x W x H 3500 x 1900 x 2500 mm Own weight approx. 5 tons Good condition - not electrically operational.

Condition: used, Unwinding reel, reversing reel GSW SCHWABE Type LHD 50/800 Special Double unwinding reel Manufacturer's No. 5775, Year of manufacture approx. 1995 Coil weight 50 kg per side Coil width max. 130 mm Coil inner diameter 155 - 445 mm Coil outer diameter 850 mm Lajdpfx Aehubgwsnuoc Support discs Ø 850 mm Guide rings Ø 850 Center of reel shaft to reel base 980 mm - Reel can be manually rotated 180° with locking positions - Central spreading via rotary lever adjustment - Mechanical disc brake, adjustable brake shoes via knurled screw Space requirement L x W x H 1000 x 850 x 1500 mm Weight 190 kg Good condition

Condition: good (used), Double reel, reel, unwind reel -Unwind reel: Double reel with 2 servo motors (each reel driven individually) -Drive: 2 Nucleus NUDrive MP85 10A Bgr2 R Rev2 IP64 servo motors -Reel: Ø 1050 mm -Photos: see photos -Dimensions: 1050/840/H1755 mm -Weight: 200 kg Lodpfx Aneylil Eeueac

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2010, Equipment: CE marking, TECHNICAL SPECIFICATIONS DOUBLE MANDREL DECOILER MILLUTENSIL TYPE SL MD 600: Model: SL MD 600 Type: 600x400 Serial number: SM2-0043 Year of manufacture: 2010 Max. load per mandrel: 600 kg Max. strip width: 400 mm Max. strip width with arms: 300 mm Min. opening: 360 mm Max. opening: 620 mm Revolutions per minute: 16 Installed power per mandrel: 1.1 kW Voltage/frequency: 400 V / 50 Hz Auxiliary voltage: 24 V Weight: 1,000 kg Lodoyt Eldepfx Anujac Machine is in excellent condition. Complete with user manual and CE conformity declaration.

Condition: used, sheet width 400 mm plate thickness 3 mm stations . System with the best coiler, straightener, eccentric press, and profile rolling machine Cutting-off system and numerous accessories Iron double coiler Type SFD 2000 Schleicher straightener Edelhoff AZR 3/100 eccentric press Press force 100 t Stroke adjustment 20-110 mm Ram adjustment 100 mm Ram strokes 105 /min The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team Lasdpoyq Sx Eofx Anusc

Condition: excellent (used), Year of construction: 2004, year of last overhaul: 2004, 4-Hi CRM Rolling Mill Head – Froehling Froehling is a renowned brand known for its reliability and robustness in the rolling mill industry. 4-Hi rolling mill head with bending and tension control. The following are its features: Manufacturer: FROEHLING (Germany) – Refurbished in 2004 Material processed: Aluminum alloys – brass – copper – low-carbon steel Strip width: 282mm (300mm) Strip thickness: 0.15 – 2mm Coil dimensions: ID 400mm – OD 1500mm Maximum rolling speed: 400m/min Work rolls: Diameter 130mm – Face 340mm Back-up rolls: Diameter 390mm – Face 335mm Complete with: Uncoiler and coiler Many sets of spare work rolls and back-up rolls Sold EXWORKS, disassembled and loaded onto a truck. Ready for any inspection by a prospective buyer. For any questions, please do not hesitate to contact us. IF YOU ARE INTERESTED, PLEASE SUBMIT YOUR OFFER; WE ARE SURE WE CAN REACH AN AGREEMENT. Ljdpfxsg Ryqkj Anujac

Condition: used, Year of construction: 2019, controller manufacturer: Sonstige, controller model: , _____ Description: Year of manuf. : 2019 Control : Sonstige Double unwinding reel with drive Design:Short design Band width min./max.:230 – 520 mm Coil weight max.:2 × 30 kN Number of reels:1 Coil outer diameter min./max.:1,500 – 2,000 mm Spreading range min./ max.:460 – 525 mm Laedpsycnf Sjfx Anusc Coil delivery:Industrial truck Reel loading:From the front (operating side) Coil unwinding:From the underside of the coil Material:Aluminium, soft Strip thickness min./max.:0.8 – 1.2 mm Tensile strength (Rm) min./max. :100 – 250 N/mm² Strip cross-section max.:600 N/mm² Straightening capacity:See straightening diagram Strip speed min./max.:2 – 10 m/min Strip infeed height above floor: 2,100 mm Degree of automation:Fixed / ± XXX mm Operating mode:Jog mode on sight system parameters System stroke rate:45 rpm Working direction:Right–left, front loading with forklift truck Flatness of installation site:± 15 mm Connection voltage:400 V, 50 Hz Ambient temperature:20 – 40 °C Compressed air connection:5 bar reel :Double reel with drive :Spreading :- Manual toggle lever system with hand crank :Coil limitation :22 November 2019 :22 November 2019 :- Single arms, manually adjustable according to scales, fixed at the front via :quick-release lever and at the rear via clamping screws :Brake/drive :- 2 frequency-controlled asynchronous motors :- 2 dual-circuit safety air pressure disc brakes :Swivelling :- Manual with 180° locking via pedal :Pneumatic pressure rollers with rubberised rollers at the top :mounted on brackets. :Hydraulic spreading :- Hydraulic spreading instead of manual spreading with hand crank :- Hydraulic unit with valves and piping mounted on the reel head :Belt pull-off and belt feed Belt loop :- Control via ultrasonic sensor/laser on the unwinding side

Condition: new, Year of construction: 2026, SLS12 is suitable for Bending & Cutting your rebar from the coils to the desired shape. High productivity and fast solution for projects. Product information: - Single Wire: 6-12 mm - Double Wire: 6-10 mm - Driving Motor Power: 11 kW Servo - Driving Speed: 120 m/min - Bending Motor Power: 4 kW Servo - Bending Speed: 1200°/sec. - Voltage: 400 V 50 Hz / optional 60 Hz - HMI 15" Display - Coiler: 3 to. (optional 5 to.) - Dimension Machine: 5000mm x 1710mm x 2340mm - Dimension Coiler: 2150mm x 2120mm x 2300mm Laodpfx Aom Tm H Ajnujc - Net weight Machine: 3000 kg - Net weight Coiler: 1000 kg Shipping: Europe-wide (self-collection also possible) If you have any questions, please do not hesitate to contact us!

Condition: good (used), Year of construction: 1996, Reel, unwind reel, motorized reel for sheet metal processing, motor reel, unwind reel, sheet metal unwinder, strip feeder, strip feeder for eccentric press, hydraulic press Ljdoitdikopfx Anuoac -Handover: in its current condition as inspected -Condition: without drive motor, without control unit, see photos -Manufacturer: Cisam Impianti, FEEDER belt feeding system -Type: 1000/2B -Passage: 395 mm -Transmission: Ratio 68.37:1, max. 251 Nm -Pneumatic cylinder contact force: 1.6 tons -Individual components: see photos -Dimensions: 1340/920/H1690 mm -Weight: 829 kg

Condition: new, sheet thickness: 10bending length: 4100upper roll diameter: 330 Technical specifications: - Hardened and polished rolls Lasdpfed Ab Ryjx Anuec - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- - oil coiler EURO 1.040,-- - center support EURO 13.600,-- - side supports EURO 10.250,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: used, Pay-off and Take-up Decoiler KEMMERICH / STANGE Type HA 1500 / 500 Serial No. 51673 Year of Manufacture: 2023 (unused) Maximum coil weight: 1500 kg Coil width with guide arms: 500 mm Coil width without guide arms: 670 mm Coil inner diameter: 300 - 370 mm Coil inner diameter with extension jaws: approx. 380 - 440 mm Decoiler turntable diameter: Ø 2080 mm Coil outer diameter without pressure arm: max. 2350 mm Coil outer diameter with pressure arm: max. 2200 mm Center of turntable to decoiler base: 1200 mm Decoiler shaft, support shaft: Ø 70 mm Speed: approx. 1.5 to 20 rpm Motor power: 1.1 kW Power supply: 400 Volt, 50 Hz - stepless turntable speed adjustment via frequency converter - loop switch / proximity switch for decoiler STOP - central expansion via hand crank - clockwise and counterclockwise rotation - pneumatic pressure arm with running roller - 4 guide arms, 870 mm each - 4 plastic extension jaws for adapting the turntable Space requirement (L x W x H) Weight: 970 kg Very good condition Lasdpfx Aneua Nngjusc

Condition: new, sheet thickness: 45bending length: 3100upper roll diameter: 480 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Lajdpfxod Ab Rcs Anujc Options: - variable speed of rotation EURO 5.858,-- - metarial feeding table EURO 5.100,-- - oil coiler STD. - center support EURO 18.750,-- - side supports EURO 15.150,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: new, bending length: 3100sheet thickness: 45upper roll diameter: 510 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: - variable speed of rotation EURO 5.858,-- Ljdpod Ab Snjfx Anuoac - metarial feeding table EURO  - oil coiler STD. - center support EURO 18.750,-- - side supports EURO 15.150,-- We have many references!

Condition: new, sheet thickness: 45bending length: 3100upper roll diameter: 510messurements (LxWxH): 6300 x 2300 x 2590prebending: 35weight approx.: 33500 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 7.000,-- - metarial feeding table EURO 3.700,-- - oil coiler EURO 800,-- - center support EURO 9.500,-- - side supports EURO 10.200,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) Laedpfed Ab N Uex Anuec We have many references!

Condition: new, bending length: 2600sheet thickness: 6upper roll diameter: 190 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls Lsdpfox Twiiex Anujac - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: - variable speed of rotation EURO 4.682,-- - metarial feeding table on request - oil coiler EURO 1.040,-- - center support EURO 8.250,-- - side supports EURO 6.600,-- We have many references!

Condition: new, Year of construction: 2025, Single band console decoiler RAZ-ENO 1250/2 - Loading capacity 2.000 kg - Inner φ 480-530 mm - with 4 clamping arms, ball bearings and with disc brakes Laedpfxjxd Rgmo Anuec - max coil width: 1.250 mm

Condition: new, Year of construction: 2025, Decoiler RAZ-DV 1250/2 - up to 2,0 t stationary - with 4 clamping arms, ball bearings and with disc brakes Lsdpfov I Ur Ejx Anueac - ecordable coil width: 1250 mm - Upper loading capacity: 2.000 kg - Downer loading capacity: 2.000kg

Condition: new, Year of construction: 2025, Single band decoiler 1.250 mm - Loading capacity up to 4.000 kg - Inner φ 480-530 mm Lasdpfsxd Rgasx Anusc - with 5 clamping arms, ball bearings and with disc brakes - max coil width: 1.250 mm

Condition: new, Year of construction: 2025, Decoiler RAZ-DV 1250/4 - up to 4,0 t stationary - with 5 clamping arms, ball bearings and with disc brakes Lsdpfev I Um Njx Anuoac - ecordable coil width: 1250 mm - Upper loading capacity: 3.000 kg - Downer loading capacity: 4.000kg