Used Cnc Toolroom Milling Machine for sale (91,749)

Condition: used, As-new CNC Vertical Machining Center, Milling Machine VMC, BAZ, HSC Milling, Machining Center TAIKAN B540Z Serial No. 1171009 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Travel range for working area X: 488 mm, Y: 400 mm, Z: 230 mm X-axis travel for tool change position X: 540 mm Table size 520 x 400 mm Spindle taper ISO 25 Distance spindle nose - table 165 - 395 mm Max. spindle speed 36,000 rpm, infinitely variable Feed rate 0 to 10,000 mm/min Rapid traverse 15 m/min Table load capacity 200 kg Max. tool length 120 mm Max. tool diameter 80 mm Max. tool weight 0.8 kg Tool change time approx. 10 sec. Axis drives 0.8 kW each Spindle drive 3.5 kW at 100% duty cycle Electrical connection 400 Volt, 50 Hz, 7.5 kW CNC path control SIEMENS Sinumerik 828 D Basic - Software: NCU V04.05+SP06+HF01 - Interfaces: LAN, USB and CF-Card - Measuring system for tool setting: METROL tool sensor - Vertical milling spindle = high-frequency spindle with liquid cooling and external recooling unit - Tool changer with 13 tool stations - Electronic handwheel - Coolant system - Protective enclosure with sliding door - Central lubrication - incl. 10 tool holders ISO 25 with ER20 collet chuck and a set of collets Transport dimensions (L x W x H): 1800 x 1500 x 2300 mm Iodpfx Asw Ed U Nefietn Weight: 2,900 kg Excellent condition – as new Machine comes from a showroom with very few operating hours.

Condition: ready for operation (used), X-travel: 500mm, y-travel: 400mm, z-travel: 350mm, quill stroke: 50mm, rotational speed: 20-5000/min, connected load: 10kVA, controls: Maho CNC 432, length: 2022mm, width: 3030mm, height: 1915mm, weight: 2.1t, operational hours counter: 29,578h, with documentation, without spare parts, mechanically and electrically the machine runs flawlessly, the control elements were recently overhauled. Itodekn R Dhepfx Afisn

Year of construction: 1990, condition: ready for operation (used), Control: Deckel Dialog 11, with vice, an inspection is possible. Iedpfsqi D S Uex Afiotn

Year of construction: 2005, condition: ready for operation (used), Table dimensions: 4000x2000mm, connected load: 11kW. Isdpfx Aofdr Iijfistn

Year of construction: 2018, condition: ready for operation (used), Rotation axis: 360°, max. rotational speed: 60.000/min, including accessories and documentation. Itedpfx Afjihp Ipjijn

Year of construction: 2008, condition: ready for operation (used), Pneumatic pressure: 6bar, connected load: 26.92kW, weight: 400kg, with documentation. Isdpfx Afelvu Rujijtn

Year of construction: 2013, condition: ready for operation (used), Travel X/Y/Z: 2000mm/1000mm/650mm, axes: 5, spindle power: 10kW, speed: 27000rpm, control: Siemens Sinumerik 840 DSL, weight: approx. 7000kg. An on-site inspection is possible. Itedpjugmxiofx Afisn

Year of construction: 2019, condition: ready for operation (used), Travel X/Y/Z: 1100mm/560mm/510mm, rapid traverse X/Y/Z: 36m/36m/30m/min, table-spindle distance: 120mm-630mm, table dimensions X/Y: 1400mm/560mm, max. table load: 1000kg. Speed: 12000rpm, spindle power: 15kW, spindle mount: CAT40, tool positions: 30, machine dimensions X/Y/Z: approx. 3200mm/2750mm/2950mm, weight: approx. 5500kg, operating hours: 2049h, spindle hours: 716h, control: DMG Mori SLIMline with Siemens 840D SL. Including chip conveyor, oil mist separator preparation, direct path measuring systems X/Y/Z, measuring probe kit for Siemens control. Documentation available. On-site inspection is possible. Iedpjuk I Eysfx Afietn

Year of construction: 1997, condition: ready for operation (used), Tool length: 250mm, max. tool weight: 6kg, control: Heidenhain CNC 234, connected load: 40kVA, machine dimensions (LxWxH): 4700mm/4100mm/2300mm, weight: approx. 2.8t, operating hours: 43,408h. The guide rail of the front door is broken. Documentation available. An on-site inspection is possible. Iedpfoulzlcsx Afijtn

Year of construction: 1992, condition: ready for operation (used), Travel X/Y/Z: 1700mm/800mm/800mm, table dimensions X/Y: 2000mm/630mm, tool holder: ISO50, max. table load: 6000kg, feed: 5m/min, rapid traverse: 15m/min. Machine dimensions X/Y/Z: approx. 5200mm/2800mm/2950mm, weight: approx. 12000kg, control: Heidenhain TNC-630, documentation available. On-site inspection is possible. Ijdpfx Afewnr Iioijtn

Year of construction: 1992, condition: ready for operation (used), Travel X/Y/Z: 1000mm/150mm/200mm, table dimensions X/Y: 1300mm/300mm, speed: 6000rpm, tool positions: 8, control: Siemens Sinumerik 810, weight: approx. 3200kg. Coolant system included. Documentation available. On-site inspection is possible. Ijdpfevyirqjx Afijtn

Year of construction: 1990, condition: ready for operation (used), Travel X/Y/Z: 800mm/600mm/550mm, table diameter: 630mm, max. table load: 300kg, swivel range B: -15°/45°, turning range C: 360°, spindle speed: 6300rpm, power: 12kW, tool positions: 40, tool holder: SK40, feed: 10m/min, rapid traverse: 6m/min. Machine dimensions X/Y: approx. 3200mm/3000mm, weight: approx. 5750kg, control: Grundig Dialog 11, including chip conveyor and cooling lubricant system Knoll PF 50, year of manufacture: 1989. On-site inspection is possible. Itedpfowtg Ibex Afijn

Condition: ready for operation (used), A CNC 4-axis wet processing machine (dental milling machine) vhf of the first generation is available. Axes: 4, speed: 60000rpm, max. block dimensions X/Y/Z: 45mm/20mm/20mm, repeat accuracy: +/-3µm, axis of rotation: 200°, materials: glass ceramic/zirconium/composite/titanium/CoCr. Machine dimensions X/Y/Z: approx. 365mm/460mm/475mm, weight: approx. 50kg. Documentation available. On-site inspection is possible. Itodpfxsw Az Nro Afion

Condition: ready for operation (used), A CNC portal milling machine FKD-Feichter with 2 columns is available. Travel X/Y/Z/W: 6000mm/4800mm/1500mm/1300mm, table dimensions X/Y/Z: 6000mm/3000mm, max. workpiece weight: 115000kg, max. table surface load: 6400kg/m², total machine bed length: 14500mm, portal dimensions X/Y: 3000mm/4400mm, C-axis: 360°, A-axis: +/-120°, ram cross-section: 700mm/700mm, feed rate: 10m/min. Total system dimensions X/Y/Z: approx. 15100mm/6100mm/7000mm, total system weight: approx. 115000kg, control: Heidenhain. Including chip protection, cooling lubricant system and hydraulic unit. The machine was built at the site in 2022. The ram and spindle are currently being overhauled. Documentation available. On-site inspection is possible. Expected to be available from September 2025. Itjdpfxjw Az N Se Afien

Condition: ready for operation (used), A CNC fine milling machine Iselautomation KG with defective spindle is available. Travel X/Y: 400mm/200mm, machine dimensions X/Y/Z: approx. 1200mm/900mm/1600mm, weight: approx. 500kg. On-site inspection is possible. Isdswydhlopfx Afiotn

Year of construction: 1995, condition: ready for operation (used), A CNC traveling column bed milling machine (lateral milling machine) Zayer is available. Travel X/Y/Z: 10000mm/1500mm/3000mm, rapid traverse X/Y/Z: 10m/15m/10m/min, spindle power: 37kW, tool holder: SK50/DIN2080, feed and spindle motors: Indramat, power consumption: 64.1kVA. Machine dimensions X/Y: approx. 18m/6.5m, weight: approx. 40t, control: Heidenhain TNC 415B, operating hours: approx. 61975h, spindle hours: approx. 41500h. Expected to be available from August 2025. Documentation available. On-site inspection is possible. Itsdpfxowpk Ahe Afijn

Year of construction: 2006, condition: ready for operation (used), A DMG Mori 3-axis precision milling machine is available. Travel X/Y/Z: 200mm/200mm/190mm, speed: 40000rpm, feed: 30m/min, accuracy: 0.001mm. Machine dimensions X/Y/Z: approx. 1800mm/1550mm/1850mm, weight: approx. 2200kg, control: Siemens 840D, operating hours: 4979h, spindle hours: 1041h. The spindle was completely overhauled in 2023. An on-site inspection is possible. Iedpfx Asvi N D Sofijtn

Year of construction: 1991, condition: ready for operation (used), X-axis: 1600mm, Y-axis: 800mm, Z-axis: 800mm, tool holder: ISO 50, speed: 20-4000/min, feed rate: 1-4000mm/min, max. rapid traverse: 10m/min, number of tool positions: 36, max. tool diameter: 160/210mm, max. tool length: 315/400mm, max. tool weight: 15kg, control: Heidenhain iTNC 530, connected load: 40kVA, machine dimensions: 5080mm/36xWxH Tool length: 315/400mm, max. tool weight: 15kg, control: Heidenhain iTNC 530, connected load: 40kVA, machine dimensions (LxWxH): 5080mm/3650mm/2005mm, weight: approx. 16t, documentation available, complete retrofit 2015. Itedpsulzk Ssfx Afien

Condition: ready for operation (used), Travel X/Y/Z: 600mm/400mm/500mm, speed: 5000rpm, tool holder: SK40, machine dimensions X/Y/Z: approx. 3900mm/2900mm/2000mm, weight: approx. 3600kg, control: Maho CNC 432, operating hours: 47333h. On-site inspection is possible. Isdpovyr Nrsfx Afiotn

Year of construction: 2008, condition: ready for operation (used), A 5-axis CNC milling machine Geiss with full encapsulation is available. Travel X/Y/Z: 2500mm/2200mm/760mm, tool holder: ER25, spindle power: 11kW, milling head type: orthogonal milling head, control: Siemens Sinumerik 840 Di solution line. Documentation available. On-site inspection is possible. Itedpjwih Alsfx Afisn

Condition: ready for operation (used), Speed: 3150 rpm, travel X/Y/Z: 710mm/500mm/500mm, number of spindle speeds: 21, feed: 2000mm/min, spindle mount: ISO40/M16, milling head table height: 559mm, table dimensions X/Y: 500mm/1000mm, T-slot spacing: 63mm, max. workpiece weight: approx. 500kg. Dimensions X/Y/Z: approx. 2700mm/2300mm/2200mm, weight: approx. 3300kg, control: Heidenhain TNC 155, documentation available. Iedpfx Ajtuwk Usfijtn

Year of construction: 1997, condition: ready for operation (used), Travel X/Y/Z: 1300mm/1100mm/1000mm, table dimensions X/Y: 800mm/800mm, number of pallets: 14, max. table load: 2200kg, table indexing: 0.001°. Speed: 7000rpm, spindle power: 50hp, tool magazine: 80, dimensions X/Y/Z: approx. 7000mm/3400mm/3800mm, weight: approx. 24000kg. On-site inspection is possible. Itodpfstx Dn Ujx Afijn

Year of construction: 1983, condition: ready for operation (used), Travel X/Y/Z: 700mm/500mm/450mm, table dimensions X/Y: 900mm/500mm, spindle mount: ISO40, speed: 3150rpm, feed: 3m/min, rapid traverse: 6m/min, spindle stroke: 100mm, machine dimensions X/Y/Z: approx. 3800mm/3600mm/2200mm, weight: approx. 3500kg, control: Philips CNC 432, on-site inspection is possible. Iodpewpu Ibefx Afistn

Year of construction: 2001, condition: ready for operation (used), X-axis: 400mm, Y-axis: 350mm, Z-axis: 400mm, table dimensions: 650mm/350mm, tool holder: SK 40, spindle speed: 1-4000/min, quill stroke: 60mm, max. feed: 2000mm/min, control: Heidenhain TNC 124, connected load: 5.5kW, dimensions: 2000mm/1000mm/2100mm, weight: 1.8t. The machine is not functional, errors occur repeatedly: Problems with the movement monitoring of the Z and Y axes, gross positioning error on the Z axis, faults when moving the control housing. The operational readiness controller is missing and appears continuously when switching on. A reference run is possible after several attempts. The spindle gear is worn out. On-site inspection is possible. Itodpfxeuqacwe Afisn

Year of construction: 1990, condition: ready for operation (used), Travel X/Y/Z: 1200mm/600mm/500mm, table dimensions X/Y: 1600mm/675mm, max. table load: 2000kg, speed: 6300rpm, feed: 10m/min, rapid traverse X: 10m/min, quill stroke: 800mm, tool holder: SK40, spindle power: 12kW. Machine dimensions X/Y/Z: approx. 3600mm/3000mm/2300mm, weight: approx. 7000kg, control: Deckel Dialog 11. The screen and the drive modules of the X and Y axes have been replaced. The rotary axis is disconnected and defective. Documentation available. On-site inspection is possible. Itodpfxswzbblo Afisn