Used Cnc Processing Center for sale (36,048)

Condition: good (used), Year of construction: 2007, operating hours: 88,040 h, functionality: fully functional, machine/vehicle number: 07400003691, turning diameter: 120 mm, spindle bore: 118 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,500 mm, total length: 5,500 mm, total width: 2,500 mm, overall weight: 11,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D POWERLINE, DMG GILDEMEISTER TWIN 102 CNC Turning and Milling Center - Recorded spindle hours: 43,558 - Spindle speed range: 3,200/5,000 rpm - Swing diameter: 270 mm - Spindle distance: 900 mm - X1 axis travel: 290 mm - Z1 axis travel: 650 mm - X2 axis travel: 180 mm - Z2 axis travel: 650 mm - Y1 axis travel: ±40 mm - Z3 axis travel: 670 mm - X3 axis travel: 175 mm - Max. bar diameter: 100/104 mm - Number of driven tools per tool turret: 12 - Including chip conveyor, with 2 tool turrets (each with 12 tool stations), main and counter spindles, as well as foot switches Attention, the machine has the following defects: - The B-axis is defective (mounted on turret 1) - Guideways and drives show age-related wear - X2 axis (guide rails) runs slightly out of alignment by approximately 0.03 mm (should be re-measured) Hodpfx Aoyaqgysdash - Occasionally, axis reference value setting in the control system fails - The hydraulic pump was replaced after a failure and is now installed externally as a standalone unit FCA D-58256 Ennepetal, loaded on truck at a mutually agreed date at the end of February 2026.

Condition: good (used), Year of construction: 2008, operating hours: 72,899 h, functionality: fully functional, machine/vehicle number: 07510001241, turning length: 1,185 mm, turning diameter: 640 mm, spindle speed (max.): 12,000 rpm, workpiece weight (max.): 150 kg, total height: 3,040 mm, total length: 7,800 mm, total width: 4,100 mm, overall weight: 16,500 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, DMG GILDEMEISTER GMX 250 LINEAR CNC Turning and Milling Center - Recorded spindle hours: 39,361 - Swing diameter: 640 mm - Counter spindle turning diameter: 400 mm - Spindle distance: 1,500 mm - X1 axis travel: 550 mm - Y1 axis travel: 180 mm - Z1 axis travel: 1,185 mm - B1 axis travel: 240° - X2 axis travel: 180 mm - Z2 axis travel: 1,050 mm - Z3 axis travel: 1,150 mm - Spindle speed range: 3,200/4,000 rpm - Rapid traverse rate, Slide 1 (X/Y/Z): 40/24/70 m/min - Rapid traverse rate, Slide 2 (X/Z): 24/36 m/min - Rapid traverse rate, Slide 3 (Z): 36 m/min - Tool holder: HSK 63 - Spindle speed: 12,000 rpm - Number of tool stations in chain magazine: 40 stations - Incl. tool holders mounted on the turret - Incl. bar loader, manufacturer: COCCHE GIOVANNI, type: CNC-DB 110, year of manufacture: 2008, serial number: CNCDB-08.306, weight: 1,500 kg Note: The machine has the following defects: - The hydraulic unit is faulty – it needs to be repaired - The Q2 axis (milling spindle tool changer) fails frequently - X2 axis (guideways) moves slightly askew - The linear guides and drives show wear commensurate with age Hedpfoyaqczox Adajh Attention: A vehicle with 3,000 mm transport width is required for transport! FCA D-58256 Ennepetal, loaded onto truck at a mutually agreed date at the end of February 2026.

Condition: good (used), Year of construction: 2011, Machine is in good working condition. Parts shown by hand not come. Toolholders will come without cutting tools. Hedpfox I Nr Eex Adaoh

Condition: excellent (used), Year of construction: 2017, operating hours: 35,000 h, functionality: fully functional, Year of manufacture: 2017 Commissioning: 06-2017 Spindle hours: approx. 8,000 Control: Mazatrol Smooth X 5-axis simultaneous machining Maximum turning diameter: 658 mm Maximum turning length: 1,519 mm Travel paths: - X-axis: 615 mm - Y-axis: 250 mm - Z-axis: 1,585 mm - W-axis: 1,574 mm - B-axis: -30° to 210° Rapid traverse: - X/Y/Z/W: 50/40/50/30 m/min Main spindle: - Drive power: 30 kW - Maximum spindle speed: 4,000 rpm - C-axis - Max. bar capacity: 80 mm Sub spindle: - Drive power: 26 kW - Maximum spindle speed: 4,000 rpm - C-axis Milling spindle: - Drive power: 24 kW (oil-air lubrication) - Maximum spindle speed: 12,000 rpm - B-axis: 0.0001° - Capto C6 Tool magazine / ATC: - 72 tool stations - Max. tool diameter: 90/125 mm - Max. tool length: 400 mm - Max. tool weight: 12 kg Special equipment: - Mayfran Consep 2000 II chip conveyor, dual change filter - Preparation for high pressure coolant (IKZ) 70 bar - 70 bar high pressure pump, 7 pressure stages - Air blow device at upper turret - Interface for bar feeder - Automatic parts catcher (D:80 x L:150 x 5 kg) - Gear milling - Milling spindle synchronized thread cutting - Constant incline angle during rapid traverse movement - Thread re-cutting function - Turning/milling function in Mazatrol - 5-axis machining package for SmoothX: - EIA/ISO 5-axis simultaneous machining Hjdpfxjyam D Us Adaeh - F) Tool tip control for 5-axis simultaneous machining - Spline fine interpolation - 5-axis spline interpolation - Sub spindle with C-axis including synchronization C1+C2 - Preparation for multiple and flash tool toolholders Dimensions / Weight: - Dimensions (L x W x H): 4,910 x 2,800 x 2,720 mm - Weight: 16,900 kg General machine options: - B-axis 0.0001° - C-axis main spindle input accuracy 0.0001° - Sub spindle positioning without C-axis input accuracy 0.001° - Absolute positioning system (linear axes) - Working area lighting - Operator door with safety interlock - CE standard - Double foot switch for both main and sub spindle - Separate switches for opening/closing chucks - Hydraulic pressure lock - Fully enclosed work area - Automatic opening/closing of chuck jaws for main and sub spindle - Chuck status feedback for main and sub spindle - Chuck status feedback via sensors - Tooleye for upper and lower turret - Lead error compensation input X, Y, Z - Standard tool set (lower turret)

Condition: good (used), Year of construction: 2010, Mazak Integrex 200 - IV, year of manufacture 2010 / overhauled in 2020 for €75,000, Mazak control, turning length 1500 mm, sub-spindle, lower turret with 9 stations, stepless B axis in milling head, 2 x C axis, Y axis, 40-position tool magazine, high-pressure coolant 70 bar, SMW steady rest SR 3.1 clamping range 25 - 165 mm, prepared for probe, measuring probe RMP 60 Q, SMW chuck KNCS NB 260 - 78 with 2 sets of base jaws, machine overhauled by Mazak in 2020 for €75,000, post processor. Hodpfx Adjyc Uk Ieaoh

Condition: good (used), Year of construction: 2001, functionality: fully functional, turning length: 555 mm, Nakamura-Tome WT-250 Year of manufacture: 2001 Control: Fanuc 18 IT INCLUDED: LOADING SYSTEM (bar feeder for a maximum bar length of 6m) and UNLOADING SYSTEM (for a maximum bar length of 2m) NEW CHIP CONVEYOR (10/2021) LIFTER OVERHAUL (09/2020) Machine Equipment ▪ Bar feeder – max. bar length 6m Max. load length 6200 mm 8 channels with channel diameters Ø 22 mm, Ø 27 mm, Ø 32 mm, Ø 37 mm, Ø 42 mm, Ø 47 mm, Ø 57 mm, Ø 67 mm Includes 8 pusher rods with pusher rod cones Intermediate sizes can also be loaded ▪ Unloading magazine – max. bar length 2m ▪ Coolant tank ▪ Chip conveyor – new as of 10/2021 ▪ Last loader overhaul in 09/2020 – channel replacement, replacement of various bearings, replacement of pusher rods and spindle liner tubes, including maintenance Technical Details ▪ Main spindle power: 18.5 kW / 15 kW ▪ Sub spindle power: 11 kW / 7.5 kW ▪ Main spindle torque: approx. 200 Nm Data sheet: 10-13 kgfm = 100 Nm – 125 Nm ▪ Sub spindle torque: approx. 100 Nm, data sheet: 7.3-10 kgfm = 100 Nm -125 Nm ▪ Spindle speed: 59-4500 rpm ▪ Bar capacity (main spindle): 65 mm ▪ Bar capacity (sub spindle): 51 mm ▪ Axis configuration: X both turrets, Y upper turret only, Z both turrets, C both spindles ▪ Travel X1 / X2: 195 mm Y: ± 41 mm Z: 600 mm ▪ Spindle nose (main spindle): A 2-6 ▪ Spindle nose (sub spindle): A 2-5 ▪ Max. workpiece diameter: 250 mm ▪ Max. turning length: 555 mm ▪ Number of tool stations: upper turret 12, lower turret 12 Hsdpeyc Uknsfx Adash All stations can be equipped with driven tools ▪ Feed power X1 / X2 and Y: 1 kW ▪ Feed power Z1 / Z2: 2.1 kW ▪ Machine dimensions (LxW): 4.5m x 2.6m ▪ Magazine dimensions (LxW): 7.0m x 1.5m ▪ Unloader dimensions (LxW): 6.0m x 1.5m

Condition: used, Year of construction: 2001, turning diameter 390 mm centre distance 1850 mm swing diameter 610 mm control SINUMERIK 840D turning speeds 20-4000 U/min spindle bore 79 mm bar capacity 65 mm total power requirement 33 kW Control System Siemens Sinumerik 840D Bed Design: 4-rail bed Guideways: Roller guides Working Area Maximum swing diameter: 610 mm Standard turning diameter: 390 mm Distance between spindles: 1850 mm Traverse travel cross/longitudinal – Slide 1: 605 / 1470 mm Y-axis – Slide 1: 210 mm B-axis – Slide 1: 240° Traverse travel cross/longitudinal – Slide 2: 227 / 1440 mm Longitudinal travel – Slide 3: 1460 mm Turning and Milling Spindle – Slide 1 Number of tools: 80 Tool holder: HSK-A63 Max. spindle speed: 12,000 rpm Max. drive power 40/100% duty cycle: 10 / 15 kW Indexing unit: 1.0° Clamping torque (locking): 500 Nm Spindle 1 – Left Max. bar capacity: 65 mm Spindle nose faceplate: 220 h5 Spindle bore: 79 mm Internal draw tube: 68 mm Front bearing diameter: 140 mm Spindle 2 – Right Max. bar capacity: 65 mm Spindle nose faceplate: 220 h5 Spindle bore: 79 mm Internal draw tube: 68 mm Front bearing diameter: 140 mm Main Drive 1 and 2 – Left / Right Max. drive power 40/100% duty cycle: 25 / 33 kW Speed range: 20 – 4000 rpm Rated speed: 700 rpm Max. torque 40/100% duty cycle: 840 / 460 Nm Drive type / design: AC / 1 Design: Integrated spindle motor C-axis speed (rapid traverse): 100 rpm C-axis torque (holding torque): 350 Nm C-axis indexing accuracy: 0.025° Slide 1 Hodox Tu Suopfx Adash Rapid traverse speed X/Ys/Z: 46 / 24 / 60 m/min Feed force X/Ys/Z: 11 / 16 / 11 kN Position resolution X/Y/Z: 0.001 mm Ball screw X (d × p): Ø40 × 15 mm Ball screw Ys (d × p): Ø40 × 10 mm Ball screw Z (d × p): Ø50 × 25 mm Slide 2 Rapid traverse speed X/Z: 24 / 60 m/min Feed force X/Z: 7.5 / 11 kN Position resolution X/Z: 0.001 mm Ball screw X (d × p): Ø32 × 15 mm Ball screw Z (d × p): Ø50 × 25 mm Slide 3 Rapid traverse speed Z: 60 m/min Feed force Z: 12 kN Position resolution Z: 0.001 mm Ball screw Z (d × p): Ø50 × 25 mm Tool Changer – Turret Head Gripper type: Double gripper Control type: Cam-controlled Tool change time G1/G2: 1.3 / 2.6 s Tool Spindle Speed 4000 rpm Coolant Unit 180 liters

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, 3 axes CNC work center for glass Hedjx Ux N Topfx Adajh with one rotating tool store : 14 positions max. glass size : 3250 x 1620 mm electro spindle power : 15 Kw speed electro spindle : 12000 rpm power : 22,5 Kw weight : 6000 kg

Condition: used, Year of construction: 2008, functionality: fully functional, turning diameter: 200 mm, spindle motor power: 11 W, spindle speed (max.): 5,000 rpm, spindle bore: 50 mm, travel distance Z-axis: 450 mm, type of input current: three-phase, chuck outer diameter: 210 mm, bar diameter (max.): 50 mm, We offer this used DMG Gildemeister CTX 310 eco CNC turning and milling center, year 2008. Hjdpfx Adeyc Nrgsash The lathe is in perfect working condition, and various sets of chucks and driven tools are included in the price. All original paper manuals are available. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Year of construction: 1994, TRAUB TNS 65 D / 5-axis CNC turning-milling center - TX8 D control Hedpfx Adsyc Nnzoash - Complete technical data see photos - Year of manufacture 1994 - Hydrobar bar feeder - Various driven tool holders - Tool holders - Three-jaw chuck - Complete documentation Subject to errors and omissions.

Condition: used, Year of construction: 2002, LATHE MORI SEIKI CL 2000 BM WITH DRIVEN TOOLS SUPPLIED WITH 7 DRIVEN TOOL POSITIONS MAX. TURNING DIAMETER: 260 mm MAX. TURNING LENGTH: 320 mm TRAVELS: Hjdpfxsyc Hmhe Adaoh X: 245 mm Z: 350 mm SPINDLE SPEED: 3,500 RPM TOOL MAGAZINE: 10 POSITIONS NO TAILSTOCK COMPLETE WITH ALL MANUALS YEAR: 2002

Condition: used, Year of construction: 2012, For sale: Combined sheet metal and tube laser cutting machine BLM ADIGE-SYS LT COMBO This unit is designed for both sheet and tube/profile cutting in a single system – the ideal solution for versatile and flexible production. The machine is connected and fully operational, available for inspection and demonstration under power. Single owner. Complete service history available, the machine has been consistently maintained with annual technical servicing. Manufacturer: BLM Group Model: ADIGE-SYS LT COMBO Technology: Fiber laser Year of manufacture: 2012 Laser cutting hours: 8543 h Hedpfx Adeyaavdoash Should you have any additional questions, we are happy to advise.

Condition: good (used), Year of construction: 2020, 5-Axis CNC Machining Center - Universal - Manufacturer: MAZAK Machine Model: Variaxis J-500 Control Unit: Mazatrol SmoothG Year of Manufacture: 2020 Number of Controlled Axes: 5 TECHNICAL DATA Travel - X-Axis (mm): 350 - Y-Axis (mm): 550 - Z-Axis (mm): 510 - Swivel Range A-Axis (degrees): -120 / +30 - C-Axis (rotary axis, rotary and tilt table): (degrees): 360 Feed Rate X/Y/Z (mm/min): 8,000 Rapid Traverse - X-Axis (mm/min): 30,000 - A-/C-Axis: 10,800 degrees/min. Spindle - Max. Spindle Speed (rpm): 12,000 - Drive Power (ED) 100 / 40 (kW): 7.5 / 11.0 Tool Magazine - Tool Holder: BT40/CAT40 - Pull Stud: Yamazaki ANSI Type - Number of Tool Positions: 30 - Tool Diameter (mm): 90 - Tool Length (mm): 300 Machine Table: Swivel rotary table Pallet System - Pallet Changer: 2-position - Clamping Table Dimensions (mm): 500 x 400 Swivel Rotary Table - Rotary Table Diameter (mm): 500 x 400 - Max. Workpiece Weight (kg): 200 FEATURES + Through-spindle coolant 70 bar + Hinged belt chip conveyor Hedpfxoyabu Ij Adaeh + Oil mist extractor + Tool length measurement and breakage control + Additional interior lighting + Signal tower (3-color) Subject to change and errors in technical details and specifications.

Condition: excellent (used), Year of construction: 2007, 1.) Work area: 500x552x300 mm 2.) Max. workpiece weight: 400 kg 3.) Milling spindle: 42,000 rpm 3.) Tool changer: 42 positions 4.) Guide system: Hydrostatic on all axes 5.) Drive: Linear motors 6.) Control: Röders RMS6 7.) Machine weight: approx. 10,000 kg 8.) Required space: 3015x2510x2750 mm Hjdpfxeyaa Ume Adaeh

Condition: excellent (used), Year of construction: 2008, Technical Specifications: Hsdpoycyn Esfx Adajh 5 axes: X, Z, Y, C, and B axes Turning diameter: 2350 mm Turning length: 1800 mm 2 pallet positions Travel distances (X/Y/Z): 3055 / 1850 / 1800 mm CNC control: MAZAK MAZATROL MatFix Chuck speed: max. 205 rpm Milling spindle speed: max. 10,000 rpm Tool changer: 80 positions Further technical details upon request Machine weight: approx. 65 t Equipment: Band filter 2 pcs. chip conveyors Spindle cooling unit Oil cooler Infrared probe Various tools Tool cabinets 2 pcs. lifting magnets The seller is not liable for typographical or data transmission errors. The machine’s appearance, technical condition and wear are appropriate for its age; second-hand machines are sold without any warranty.

Condition: excellent (used), CNC machining center, horizontal moving column type, with automatic tool changer, linear digital scales on X, Y, and Z axes, and Siemens 850M computerized numerical control. Hjdpfx Adeycxnkeash Includes all standard machine equipment: Travel ranges: X = 1500 mm (60”) Y = 1500 mm (60”) Z = 810 mm (32”) Spindle speed range: 20 – 6000 RPM Operator station mounted on the platform with CRT display Portable pushbutton station for manual machine control Pushbutton for machine setup Safety door mounted on the platform, electrically interlocked Cartridge-type spindle with automatic power input and quick-change system Oblong matrix tool magazine for 90 tools, dual chain, carriage-mounted to ensure interference-free storage Tool chain guard with electrical interlock Tool change mechanism mounted on the carriage, transferring tools between the magazine and spindle Complete unit composed of a double arm and corresponding tool change mechanism, swinging the magazine chain to the spindle and vice versa, operated by hydraulic cylinder. Double arm. Rotation is powered by a hydraulic motor, and the feed/retraction movement is operated by a hydraulic cylinder.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, This multi-axis CNC lathe, CMZ TTL-66-66-T1Y-T2Y, was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power output of 35.5 kW. The machine is equipped with two high-performance spindles with a 66 mm bar passage, two turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, and Y-axis capability on both the upper and lower turrets. It includes a 35-bar high-pressure coolant system, complete with a filtration system and an additional tank. For more information about this lathe, please refer to the attached brochure or contact us directly. Hodjxmhdnjpfx Adajh Equipment includes: - LPS for left spindle - Reduction tube for left spindle - Hainbuch AXFIX 65 collet chuck (standard) 2703/0008 for left spindle - Hainbuch AXFIX 65 collet chuck (standard) 2703/0008 for right spindle - Tool presetting device - Side-mounted chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75µm filter - Coolant wash nozzle - TA/06000/10 8,000W coolant chiller unit - Machine status indicator light - Tool life management system - Tool load monitoring - Programmable automatic parts catcher (pneumatic) - The workpiece extractor is equipped with a pneumatic gripper for automatic opening and closing to retrieve finished parts - Pneumatic ejector for the sub-spindle with 100 mm adjustable stroke. End position detection via sensor - Coolant supply through right spindle - Interface for bar feeder (unimag) - Preparation for extraction unit, connection flange Ø100 The machine comes complete with a chip conveyor, coolant unit, and tool package. It is available for immediate inspection under power, and available at short notice. Single-shift operated. Further information available on request.

Condition: used, Year of construction: 2016, MORBIDELLI AUTHOR M400 MAIN FEATURES 5-AXIS MACHINING UNIT "PRISMA: QUALITY AND PRODUCTIVITY AT THE HIGHEST LEVEL XILOG MAESTRO SOFTWARE: EXTREMELY SIMPLE MATIC PROGRAMMING" WORKTABLE: ONE POSITIONING FOR MULTIPLE MACHINING OPERATIONS TECHNICAL DATA AUTHOR M400 AXES Working area X-axis (inside stop) mm 3,680 Working area Y-axis (max. loadable piece on rear stops) mm 1,680 Workpiece passage Z / number of Z axes mm 170 / 1 Workpiece length with pendulum machining mm 1,650 Travel speed X-Y axes Pro-Speed m/min 85 Z-axis speed m/min 30 INSTALLATION Installed power KVA 62÷82 Compressed air requirement NL/min 400 Extraction air requirement m³/h 4,430 Extraction air speed m/s 25 Extraction nozzle diameter mm 250 GENERAL CHARACTERISTICS CNC-controlled drilling and milling center in gantry design and work table with workpiece supports, for carrying out: - vertical drilling on the panel surface - horizontal drilling on all four sides of the workpiece - groove milling with disc milling cutters - general milling work 3-4-5 axes MACHINE STRUCTURE The basic structure is a monolithic construction made of thick-walled steel. It is stiffened by welded reinforcements across the entire machine bed, making it extremely stable. The table shape used, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow with a minimum of space requirements. The mobile gantry support is made of a solid monoblock. It is positioned in the X direction on prismatic ground guides via recirculating ball slides. On this mobile unit carrier, the work unit is mounted on prismatic, ground guides and recirculating ball slides. All axes are moved on large-section prism linear guides and recirculating ball bearings with a large contact surface, ensuring optimal gliding even at the highest speeds and accelerations. Precise and rapid positioning of the movable gantry (X-axis) is achieved by a pinion and rack with helical teeth. Large-section recirculating ball screws ensure precise positioning of the work unit along the movable gantry (Y and Z axes). MOTORS, DRIVES AND INVERTERS Perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors, designed to achieve speeds of up to 90 m/min while ensuring the best finishing quality. CONTROL The control unit consists of a numerical control for milling and drilling machines with "Xilog Maestro" graphical user interface based on the Windows 7 Office operating system. 17-inch LCD color screen. QWERTY keyboard. Tilting control panel. Machine interface with Xilog Maestro software. Xilog Maestro Features Programming Parametric graphic programming Import of DXF files (2D; SPLINE, POLYLINE 3D geometries), linear or circular interpolation in three axes, linear in space, spiral in the selected plane. Programming with graphic and syntax aids for drilling and milling operations Automatic optimization of drilling operations and tool change cycles Possibility of Plate zero point shift for drilling on inclined or curved plate sides Hjdpfxoxnldbo Adaeh

Condition: ready for operation (used), Travel X/Y/Z: 450mm/310mm/300mm, table dimensions X/Y: 840mm/320mm, tool stations: 12, tool holder: SK40, speed: 4000rpm. Machine dimensions X/Y/Z: approx. 2000mm/2000mm/2200mm, weight: approx. 2500kg, control: Heidenhain TNC 155. On site inspection is possible. Hodpfx Adoycwq Rjaeh

Condition: ready for operation (used), Travel X/Y/Z: 650mm/400mm/425mm, table dimensions X/Y: 545mm/540mm, max. table load: 500kg, speed: 10000rpm, tool stations: 20, rapid traverse: 30m/min, feed rate: 20m/min. Machine dimensions X/Y/Z: approx. 3400mm/2100mm/2800mm, weight: approx. 5500kg. On-site inspection is possible. Hodjycwrbspfx Adaoh

Condition: used, Year of construction: 2011, operating hours: 4,598 h, functionality: fully functional, machine/vehicle number: 3087698, turning length: 806 mm, turning diameter over cross slide: 584 mm, turning diameter: 457 mm, spindle motor power: 22,000 W, spindle speed (max.): 6,000 rpm, travel distance X-axis: 318 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 584 mm, rotational speed (max.): 4,800 rpm, rotational speed (min.): 4,500 rpm, type of input current: three-phase, We offer this used Haas DS-30Y CNC turning and milling center, year of manufacture 2011. Voltage: 360-480 V Phase: 3 Frequency: 50/60 Hz Full load current: 40 A Maximum current: 70 A Short-circuit interrupting capacity: 10,000 A Hodpjycwbpsfx Adajh Symmetrical short-circuit current: 5,000 A If you have any questions or need more information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2015, Technical data: Capacity Max. swing diameter Ø 600 mm Max. turning diameter and length: Ø 370 x 750 mm Through-hole: Ø 82 mm Spindle Axis height from floor: 1,140 mm Spindle bearing/bore diameter: Ø 140 / Ø 90 mm Spindle nose A2-8 Hedpfx Adowp Uhhoaoh Spindle speed: 4,200 rpm C-axis resolution: 0.001 ° Counter spindle Axis height from floor: 1,140 mm Spindle bearing/bore diameter: Ø 90 / Ø 53 mm Spindle nose F-140 Spindle speed: 6,000 rpm C-axis resolution: 0.001 ° Stroke lengths and rapid traverses Stroke lengths X-axis: 267 mm, Z-axis: 840 mm Y-axis: -50 ~ +70 mm, A-axis: 780 mm Rapid traverse stroke X-axis = 30 m/min Z-axis = 30 m/min Y-axis = 10 m/min A-axis = 30 m/min Power Spindle motor (30 min. / 100% duty) AC 22 / 15 kW Max. torque: 618 Nm (S3 25%) Driven tools Number of tool stations on turret: 15 pcs Max. tool speed 6,000 rpm Drive power (30 min. / 100% duty) 7.5/3.7 kW Maximum torque 48 Nm Tool equipment Driven tool stations: 15 pcs Tool cross-section: 25 x 25 mm For boring operations: Ø 40 mm Dimensions Height: 2,300 mm Depth (without chip conveyor): 2,140 mm Width (without chip conveyor): 3,000 mm Net weight: 6,200 kg

Condition: used, Year of construction: 1999, operating hours: 65,090 h, functionality: fully functional, ET365 GS with bar feeder and chip conveyor The machine is fully equipped - Collection tray - High-pressure pump - Control cabinet air-conditioning unit - Kupa loader - The machine was purchased from a running production operation and has been technically inspected - Geometry measured and all settings adjusted Hjdpfx Aoycvaqjdash - Wearing parts replaced - All functions checked and adjusted as required The machine is fully operational and ready for immediate production The machine is available immediately

Condition: excellent (used), Year of construction: 2009, Description The machine was used exclusively for plastics! Excellent condition TECHNICAL DETAILS X-axis travel: 260 mm Y-axis travel: 100 mm (+/- 50 mm) Z-axis travel: 590 mm C-axis movement: 0.001 Max. main spindle speed: 6,000 rpm Maximum turning diameter: 356 mm Some axial and radial milling holders Tool turret: 16-position all driven Bar capacity: 65 mm Axis: 4 Hodpeycu Ruofx Adajh MACHINE DETAILS Control: MSX-850 III CONTROL Dimensions & Weight Dimensions (L x W x H): 2,705 mm x 2,000 mm x 2,120 mm Weight: 5,800 kg EQUIPMENT Parts catcher Driven tools Tailstock Tool setting probe Dust extraction

Condition: excellent (used), Year of construction: 2003, Technical data: 5 axes: X; Z; Y; C, and B axis Turning diameter: 1250 mm Turning length: 1450 mm 2 pallet stations Travel paths (X/Y/Z): 1875 / 1550 / 1345 mm CNC control: MAZAK MAZATROL 640 M Pro Chuck speed: max. 500 rpm Milling spindle speed: max. 10,000 rpm Tool changer: 80 positions Tool holder: SK 50 Further technical details on request Machine weight: approx. 55 t Accessories: Belt filter Chip conveyor Hedpfxjyctgnj Adash Spindle cooling unit Oil cooler Infrared probe Various tools Tool cabinets The seller accepts no liability for typographical or data transmission errors. The machine's appearance, technical condition, and wear are appropriate for its age; used machines are sold without any warranty.