CNC turn-mill center

Takisawa TS 4000 YS

Condition: excellent (used), Year of construction: 2021, operating hours: 6,400 h, functionality: fully functional, turning diameter over cross slide: 600 mm, turning length: 750 mm, turning diameter: 370 mm, spindle bore: 82 mm, spindle speed (max.): 4,200 rpm, travel distance X-axis: 267 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 840 mm, spindle motor power: 22,000 W, rotational speed (max.): 6,000 rpm, total height: 2,300 mm, total length: 3,000 mm, total width: 2,140 mm, turning diameter over bed slide: 370 mm, overall weight: 6,200 kg, bar diameter (max.): 82 mm, Equipment: documentation/manual, rotational speed infinitely variable, TAKISAWA TS-4000YS FANUC 32i-B JAPAN Made in Japan High rigidity (6200 kg weight, 30° inclined machine bed, slide rails) - Built-in main and sub-spindle - High rigidity and built-in main and sub-spindle enable precise and vibration-free machining - 22 kW main spindle with 618 Nm max. torque - High performance and solid machine bed enable high-volume chip removal - Y-axis Technical data: Capacity Max. swing diameter Ø 600 mm Max. turning diameter and length Ø 370 x 750 mm Trought hole: Ø 82 mm Spindle Axle height from the ground 1,140 mm Spindle bearing/bore diameter Ø 140 / Ø 90 mm Spindle head A2-8 Spindle speed 4,200 rpm C-axis resolution 0.001 ° Sub spindle Axle height from the ground 1,140 mm Lsdpex Tf Rzsfx Ad Nsrg Spindle bearing/bore diameter Ø 90 / Ø 53 mm Spindle head F-140 Spindle speed 6,000 rpm C-axis resolution 0.001 ° Strokes and rapid traverses Strokes X-axis = 267 mm Z-axis = 840 mm Y-axis = - 50 ~ +70 mm A-axis = 780 mm Rapid traverse X-axis = 30 m/min Z-axis = 30 m/min Y-axis = 10 m/min A-axis = 30 m/min Power Spindle motor (30 min. / 100 % ED) AC 22 / 15 kW Max. torque: 618 Nm (S3 25%) Driven tools Number of tool positions on the turret 15 pcs Max. tools speed 6,000 rpm Drive power (30 min. / 100 % ED) 7.5/3.7 kW Maximum torque 48 Nm Tooling Driven tool positions 15 pcs Tool cross-section 25 x 25 mm For hole machining Ø 40 mm Dimensions Height 2,300 mm Depth (without chip conveyor) 2,140 mm Width (without chip conveyor) 3,000 mm Net weight 6,200 kg Including options: FANUC Data SERVER LNS Barfeeder interface Part catcher chip conveyor Renishaw tool mesaurement (main and subspindle also) Kitagawa BB-250 3 jaws hydraulic chuck – main spindle Kitagawa SS1881K hyraulic holow cylinder – main spindle Kitagawa B-206 3 jaws hydraulic chuck – sub spindle Kitagawa SS12640K hyraulic holow cylinder – sub spindle 15 pos turret High power coolant pump (520W) Work lamp 3-3 pcs live tool (radial-axial) Live center some static tool holder NOT INCLUDING: 2 pcs SMW chuck (possible buy) transporting

Condition: excellent (used), Year of construction: 2018, Tool holder VDI 30 Lredpfsx Nnbhox Ad Nsg Tool turret with 12 stations Main spindle speed: 5,000 rpm Drive power: 16.5 kW Including bar feeder Including documentation

Year of construction: 2021, condition: ready for operation (used), General Data Measurements width 2140 mm Measurements depth 3000 mm Measurements height 2300 mm Machine weight 6200 kg Control Unit Brand FANUC Model Series 32i-Model B Main Drive Spindle speed range 4200 Main motor power 22 kw Movement X-Axis Rapid Traverse 30 m/min Y-Axis Rapid Traverse 30 m/min Z-Axis Rapid Traverse 30 m/min X-Axis Movement 267 mm Y-Axis Movement -50 to 70 mm Z-Axis Movement 840 mm Media Chip conveyor Yes Additional Equipment LNS Barfeeder interface Part catcher Renishaw tool measurement (main and subspindle also) Kitagawa BB-250 3 jaws hydraulic chuck – main spindle Kitagawa SS1881K hydraulic hollow cylinder – main spindle Kitagawa B-206 3 jaws hydraulic chuck – sub spindle Lrsdpfex D Iu Iex Ad Njg Kitagawa SS12640K hydraulic hollow cylinder – sub spindle 15 pos turret High power coolant pump (520W) Work lamp This 3-axis Takisawa TS-4000YS was manufactured in 2021. It features a robust 6200 kg frame with a 30° inclined bed for stability and precision. Key specs include a 22 kW main spindle, 618 Nm torque, and rapid traverses up to 30 m/min. It's equipped with a dual spindle, Y-axis, and a 15-position turret for versatile machining. If you are looking to get high-quality turning capabilities, consider the Takisawa TS-4000YS machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 2015, TAKISAWA TS4000YS year 2015 CNC control FANUC 32i-MODEL B Max. turning diameter 315 [mm] Max. swing over bed 600 [mm] Max. Turning length 735 [mm] Stroke X axis 267 [mm] Stroke Z axis 840 [mm] Stroke Y axis -50 [mm] / +70 [mm] Stroke A axis 780 [mm] Rapid traverse rate X axis 30000 [mm/min] Rapid traverse rate Z axis 30000 [mm/min] Rapid traverse rate Y axis 10000 [mm/min] Lodpfx Adewq Sf To Norg Rapid traverse rate A axis 30000 [mm/min] Spindle nose A2-8" Max. bar diameter 82 [mm] Spindle throughbore 94 [mm] Max. spindle speed 4200 [rpm] Spindle power 22 [kW] Counter spindle nose F140 Counter spindle throughbore 53 [mm] Max. counter spindle speed 6000 [rpm] Counter spindle power 11 [kW] Max. tool holder cross-section 25 [mm] Number of tool stations 15 Number of tool stations driven 15 Max. speed driven tools 6000 [rpm] Lubrication tank capacity 370 [l] Total power required 37 [kVA] Supply voltage 400 [V] Chip conveyor with machine 5 live tool holders Weight 6700 [Kg]

Condition: good (used), Year of construction: 2013, Turning diameter 376mm, turning length 760mm, Lrjdpfxexv Svms Ad Nsg bar capacity 76mm, Y axis -/+ 52.5mm, C axis 0.001 degrees on both spindles, 12 station turret, 22KW Motor, Main spindle 4000rpm, sub-spindle 4500rpm, 3 jaw chucks, swarf conveyor, tool setter, magazine barfeed unit.

Condition: good (used), Year of construction: 2004, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and Lrodpfx Asul Efmod Neg easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: C4652, grinding length: 5,100 mm, grinding width: 250 mm, overall weight: 9,100 kg, space requirement height: 2,300 mm, space requirement length: 9,000 mm, space requirement width: 4,000 mm, Reform AR 51 Type 7 Surface grinding machine Lrodpfx Adjtqtk Aj Nog Year of manufacture: 1990 Grinding length: 5100mm Grinding width: 250mm Workpiece height: 220mm Total power requirement: 36kW Used water system Lifting station, magnetic roller, pump

Condition: new, Horizontal Bending Machine Fastech FP 30 Description • Pressure: 30t • Stroke: 285mm • Max. tool height: 250mm • Flat bar on the tall edge: 200 x 18mm Lsdpfx Adefg Eu Uo Nsrg • Working speed: 10.0mm/sec • Return speed: 10.0mm/sec • Working height: 930mm • Table: 660 x 1250mm • Total power requirement: 3.0kW • Motor: 400 Volt 50Hz • Weight: 850kg • Dimensions (L-W-H): 1250 x 650 x 1250mm • Oil capacity: 40.0l Equipment: • Hydraulic horizontal bending machine • Solid work surface made of stabilized steel • Machine made from hardened and ground forged steel • Digital stroke adjustment display • 1x tool set • Double foot switch

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, turning length: 810 mm, turning diameter over cross slide: 800 mm, turning diameter: 320 mm, spindle motor power: 25,000 W, spindle speed (max.): 5,000 rpm, spindle bore: 73 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 810 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 50 m/min, rotational speed (max.): 6,000 rpm, CNC FANUC MSX-701 / MAPPS IV CAPACITY Swing diameter over bed: mm 800 Swing diameter over cross slide: mm 800 Maximum turning diameter: mm 320 Standard turning diameter: mm 200 Maximum distance between the center: mm 1.130 Maximum turning length: mm 810 Maximum workpiece size: mm 300 TRAVELS X axis turret 1 and 2: mm 210 Y axis turret 1 and 2: mm +65 / -45 Z axis turret 1 and 2: mm 810 B axis headstock 2: mm 920 MAIN SPINDLE Maximum speed: rpm 5.000 Drive power (30 min / continuous operation): kW 25/22 Maximum bar diameter: mm 65 Spindle bore: mm 73 Spindle diameter in front bearing: mm 120 Spindle mount: JIS A2-6 C-axis resolution: degrees 0,001 SUB SPINDLE Maximum speed: rpm 5.000 Drive power (30 min / continuous operation): kW 25/22 Maximum bar diameter: mm 65 Spindle bore: mm 73 Spindle diameter in front bearing: mm 120 Spindle mount: JIS A2-6 C-axis resolution: degrees 0,001 FEED DRIVES Rapid traverse turret 1 X/Y/Z: m/min 30/20/50 Rapid traverse turret 2 X/Y/Z: m/min 30/20/50 TOOL TURRET Ljdpfjwlvlgsx Ad Nerg Number of turrets: 2 Number of tool stations per turret: 16 Shaft cross – section for turning tools: mm 20 x 20 Maximum shaft diameter for boring bars: mm 32 Turret switching time (1 station): s 0,18 Maximum speed of the driven tools: rpm 6.000 Drive power for driven tools (5 min/continuous operation): kW 7,5/5,5 DIMENSIONS Installation area with chip conveyor: mm 5.120 x 2.720 Net weight: kg 8.300 Macchina equipped with: • High pressure cooling system • Bar loader interface • Gantry-type piece unloading arm • Cutting effort management system and load monitor • No. 1 double radial motorized tool holder • No. 3 axial motorized tool holders • No. 2 external tool holders • No. 2 double boring bar holders • No. 2 single radial motorized tool holders • No. 2 internal boring bar holders • No. 2 Kitagawa BD 208 self-centering chucks diam. Mm 210 • No. 1 set of jaws for each self-centering chuck • Instruction manuals and CE declaration Year of manufacturing: 2010

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Double spindle CNC lathe with 2 spindles, 3 turrets and 3 Y axes each turret with 15 stations, BMT 44 driven tool holder 2x C-axis 3x Y axis Fanuc 32i -TB control Bar passage 65 mm Left spindle 15/11 KW, Hainbuch Spanntop mini Axle pull size 65 Right spindle 11/7.5 KW, Kitagawa three-jaw chuck Finished part gripper Conveyor belt Bar loader interface Coolant system, separate tank 200 l Cooling unit Lredpfsvxu Eajx Ad Njg High pressure on turrets 1-3 via M function 15 bar/40 l/min 2x Brinkmann pump Renishaw tool measurement for all turrets Tool monitoring for spindle and AGW Spindle flushing through the counter spindle IKZ, Deublin Rotary distributor Hinged belt conveyor Transformer available immediately