Used Cnc Press for sale (34,077)

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 Dedpfx Abow Iq Ugo Tecr - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition

Condition: excellent (used), Offer for COMEXI FP Gearless flexo printer, 10 colors, year 2003, 1270 mm width Dcsdsxf U A Iopfx Ab Tsr

Year of construction: 1983, condition: used, machine/vehicle number: 28148, pression: 150 t working width: 4500 mm clear support width: 3050 mm support throat: 300 mm rear stop: 1000 mm Dodpfx Aob N Evmjb Tscr electrical connection: 380 V, 18,5 kW weight: 14,8 t space needed: 4200 x 2000 x 3000/3150 mm

Condition: good (used), Year of construction: 2000, machine/vehicle number: 7532000080, Offer 25092 Technical specifications: - Working width 3500 mm - Pressure capacity 160 t - Clearance between columns 3100 mm - Table width 405 mm - Throat depth 260 mm - Installation height approx. 240 mm - Ram stroke 180 mm - Working height approx. 870 mm - Motor power approx. 15 kW - Oil capacity approx. 300 l - Space required approx. W 3800 x H 2750 x D 2100 mm - Weight approx. 11500 kg - With: - Swivel arm - Control panel with CYBELEC CNC control - Y 1 + 2 ; X ; Z Dedpfov Tli Eex Ab Tocr - Motorized backgauge up to 620 mm - Manual crowning WILA - 4-way universal die + pointing tool - Two-hand control panel with foot switch - Support arms

Condition: new, Year of construction: 2025, control type: CNC control, bending force (max.): 63 t, working width: 2,000 mm, travel distance X-axis: 550 mm, back gauge adjustment: CNC-controlled, back gauge: 550 mm, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Brand new 3-axis CNC-controlled press brake with automatic bending angle calculation and color graphics. Maximum pressing force: 630 kN = 4 mm steel sheet S235jr bent along the entire bending length with a V-width of 36 mm Maximum bending length: 2,000 mm Distance between side frames: 1,320 mm Throat depth in side frames: 250 mm Ram stroke length: 100 mm Maximum installation height: 320 mm Ram travel speed downwards: 50/6 mm/sec, upwards: 60 mm/sec Dcodpfoxdiyrex Ab Tor Table width: 160 mm Back gauge adjustment range: 550 mm Oil tank capacity: 250 liters Dimensions approximately 2.6 x 1.5 m x height 2.4 m Drive power: 5.5 kW Weight: approx. 3,500 kg Equipment: - Die block - Bending punch

Condition: used, Year of construction: 2004, machine/vehicle number: P020504, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Delem, controller model: DA-66W, bending force (max.): 130 t, working width: 3,150 mm, stroke length: 350 mm, throat depth: 500 mm, distance between stands: 2,600 mm, installation height: 550 mm, operating speed: 10 mm/s, reverse speed: 115 mm/s, number of axes: 6, table height: 950 mm, type of crowning: CNC-controlled, oil tank capacity: 160 l, travel distance X-axis: 500 mm, back gauge adjustment: CNC-controlled, back gauge speed R-axis: 100 mm/s, back gauge travel distance R-axis: 160 mm, overall weight: 13,500 kg, total length: 2,300 mm, total width: 4,000 mm, total height: 3,100 mm, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, lower tooling, safety light barrier, upper tooling, Offered Machine: Used CNC Hydraulic Press Brake Manufacturer: CR Electronic Model: GOLD 130/31 Year of manufacture: 2004 Control: Delem DA-66W (8-axis capable) Condition: used, fully functional (Z-axes currently out of service, see below) Technical Specifications: - Press force: 1,300 kN (130 t) - Bending length: 3,100 mm - Distance between uprights: 2,600 mm - CNC-controlled axes: Y1, Y2, X, R, Z1, Z2 (Note: Z1 and Z2 are currently electronically out of service – new servo drives required. Manual movement possible.) - Stroke: 350 mm - Installation height: 550 mm - Throat depth: 500 mm - Backgauge (X): 600 mm - Table height: 950 mm Dsdpfx Asw A Rggeb Tscr - Working speed: 10 mm/s - Return speed: 115 mm/s - Motor power: 11 kW - Operating pressure: 275 bar - Weight: approx. 13,500 kg Equipment & Features: - CNC-controlled hydraulic crowning - System tool holders top & bottom - Manual quick clamping of upper tools - Laser optical finger guard (safety light curtain) - PLC-supported diagnostic system - 2 support arms with quick adjustment - Operating manuals available - CE compliant Including accessories: - Fully equipped tool cabinet - Upper tool 88°, full machine length - Upper tool 35°, full machine length - Round bending upper tool - V8 T-die, full machine length - V12 T-die, full machine length - Flattening die, approx. 2,000 mm length Condition / Remarks: - Machine is in well-maintained condition, currently connected - Inspection and test run under power possible on site - Z1/Z2 currently not operational – new servo drives required - Machine is being replaced due to a planned modernization involving the acquisition of a new press brake. Price: €26,500 net (plus VAT) Negotiable for quick and straightforward purchase.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, actuation type: hydraulic, bending force (max.): 56 t, working width: 2,200 mm, throat depth: 200 mm, distance between stands: 2,100 mm, TECHNICAL DETAILS Press force: 56 t Bending length: 2,200 mm Distance between uprights: 2,100 mm Throat depth: 200 mm MACHINE DETAILS Total power requirement: 20 kW Dimensions & Weight Space requirement: 2,800 x 1,800 x 2,400 m Dcsdpfx Absw Sxcys Ter Machine weight: 6,100 kg

Year of construction: 2010, condition: ready for operation (used), General Data Machine weight 21000 Dcjdpfx Abow N Tnro Tjr Control Unit Brand FANUC Model n/a Main Drive Number of axis 3 Turret Number of turrets 45 Additional Equipment Power Required: 27 kVA Noise Level: 91 dB (A) This 3-axis AMADA EMZ 3510 NT was manufactured in 2010. It features a punching capacity of 300 kN and includes 45 turret stations. With a power requirement of 27 kVA and a weight of 21000 kg, this CNC punch press is robust and efficient. If you are looking to get high-quality punching capabilities, consider the AMADA EMZ 3510 NT machine we have for sale. Contact us for more information about this machine. Application Types Punching

Year of construction: 1991, condition: used, machine/vehicle number: K2940, pression: 150 t working width: 4300 mm Dedo Dnf Uopfx Ab Tscr clear support width: 3600 mm support throat: 300 mm max. assembly height: ca. 500/700 mm working speed: auf-/abwaerts 41 - 65/10 mm/sec rear stop: 1000 mm electrical connection: 400 V, ca. 15 kVA kW weight: 14 t space needed: 4600 x 1950 x 3100 mm

Year of construction: 1992, condition: good (used), machine/vehicle number: 03.323.36002, Lg.No. 22621 Technical data: - max. working length 3500 mm - column passage 3050 mm - max pressing force 2000 kN - max distance table / ram 480 mm - column throat 260 mm Dcsdpfx Abjip Niks Ter - ram stroke approx. 300 mm - Stroke speeds - downward speed idle max. 100 mm/sec - Upward speed 80 mm/sec - Downward press speed max. 10 mm/sec - Total drive power 25 kW - Space requirement approx. W 4500 x H 3150 x D 2100 mm - weight approx. 16000 kg - with: - CNC - control CYBELEC renewed in 2008 - controlled crowning device - controlled backgauge with height adjustment 5 - 1000 mm - hydr. tool clamping - upper tool + universal die tool - material supports - two-hand control panel

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) Dcjdpfjhmmfksx Ab Tjr - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition

Condition: good (used), Year of construction: 2004, overall weight: 40,000 kg, pressing force: 450 t, AXIAL 4100x450tn + Cybelec ModEva 10 + 5 axes (Y1, Y2, X, R, Z) + WILA cnc compensation table + WILA hydraulic punch and die clamp Bending length: 4.100mm Dcjdpeu Au U Tefx Ab Tor Force: 450tn Cursa: 365mm Axes: 5 axes (Y1, Y2, X, R, Z) *Z-axis (double prismatic guide nipples) WILA hydraulic clamping of punch and die WILA cnc compensation table Trancha working speeds: Approach speed: 110mm/sec. Working speed: 8mm/sec. Up speed: 90mm/sec Distance between uprights: 3600mm Neckline: 410mm Opening between table and truss: 500mm Pit penetration: 975mm Cnc: Cybelec ModEva 10 (Control CPU New as of September 2023) Laser safety: DSP LASER - TX Weight: 40tn Motor power: 30KW

Year of construction: 1989, condition: ready for operation (used), A Darley CNC press brake is available. Pressing force: 2000kN, working width: 5200mm, power: 15kW, oil capacity: 160l, machine dimensions X/Y/Z: approx. 5500mm/1900mm/3100mm, weight: approx. 20000kg. Including tools and accessories. Documentation available. On-site inspection is possible. Dcodpfovf Ixyex Ab Ter

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBO-4016-CNC Delem DA-58T Specifications - Max working thickness (S235): up to 8.0 mm - Nominal pressure: 1600 kN - Max working length 4000 mm - Throat depth: 320 mm - Max stroke: 180 mm - Daylight: 455 mm - Distance between side frames: 3200 mm - Max backgauge distance: 600 mm - Nominal motor power: 15.0 kW - Length: 4100 mm - Width: 1650 mm - Height: 2600 mm - Weight: 10700.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Delem DA-58T controller - Advanced operator support based on algorithms - Advanced, graphic simulation of bending sequences - Operator prompts included - Algorithms to shorten the production process - Automatic calculation of crowning Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Dedpfjtizavjx Ab Tocr Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Year of construction: 1990, condition: used, pression: 250 t working width: 3550 mm clear support width: 3050 mm support throat: 300 mm rear stop: ja mm electrical connection: 400 V, ca. 26 kW weight: 20 t space needed: 2100 x 3800 x 3100 mm Dodpfxe Dqaqo Ab Tecr

Condition: used, Year of construction: 1986, machine/vehicle number: 200485, Lg.no. 24243 Technical data: - max. working length 4050 mm - upright clearance 3050 mm - max. pressing force 110 t - ram stroke 200 mm - throat 350 mm - Table height 900 mm - Opening width 400 mm - Drive power 17.5 kW - Space requirement approx. W 4250 x H 2850 x D 2200 mm - Weight approx. 15.0 t - with: - CYBELEC ModEva 10 S control unit renewed in 2011 Dodpfotqmvzex Ab Tjcr - Y 1+ 2 , X , Z - Two-hand control panel: - Mot. backgauge 5 - 1000 mm - front support arms - split pointing tool, - universal die

Condition: ready for operation (used), Year of construction: 1997, Press force: 1700kN, bending length: 4000mm, stroke: 215mm, installation height: 365mm, passage width: 3680mm, throat depth: 410mm, feed speed: 200mm/s, bending speed: 1-10mm/s, retraction rate: 135mm/s, working height: 1050mm, control: Delem. Including spare parts and accessories. Documentation available. Dcedjtqfqiepfx Ab Tjr

Year of construction: 1998, condition: ready for operation (used), Pressing force: 2000kN, working width: 3100mm, column passage: 3240mm, max. stroke: 400mm, throat depth: 250mm, max. installation height: 965mm, NC axes: 11, hydraulic volume: 550l, machine dimensions X/Y: approx. 4400mm/3400mm, weight: approx. 16600kg, control: Cyb-Tech Infinitron. Documentation available. On-site inspection is possible. Dedpfx Abewhp Ndj Tocr

Year of construction: 1995, condition: ready for operation (used), Pressing force: 200t/2000kN, bending length: 3550mm, upright distance: 3050mm, upright projection: 350mm, max. ram stroke: 200mm, max. ram-to-table distance: 540mm. Dimensions X/Y/Z: approx. 4400mm/2100mm/3200mm, weight: approx. 16000kg, control: Cybelec DNC 800. Including a matrix, 2x upper tool (30°/60°) and a new light barrier. Documentation available. On-site inspection is possible. Dcedpfxjtva Dnj Ab Tjr

Year of construction: 1996, condition: ready for operation (used), Pressing force: 1200kN, working width: 4100mm, stand distance: 3550mm, table width: 215mm, throat depth: 400mm, stroke: 800mm, working speed: 80mm/s, power: 11kW, weight: approx. 12000kg. An on-site inspection is possible. Dcodjumwh Nspfx Ab Tjr

Condition: ready for operation (used), Pressing force: 440kN, working width: 1600mm, cylinder stroke: 150mm, travel X/R: 400mm/200mm, adjustment speed R-axis: 200mm/s, installation height: 400mm, throat depth: 200mm, machine stand distance: 1530mm, motor power: 7.5kW, weight: approx. 2100kg. Including various accessories and tools. Documentation available. On-site inspection is possible. Dcedou N Hc Nopfx Ab Tor

Year of construction: 2003, condition: ready for operation (used), There are 3 retrofit Feintool fineblanking presses with controls from Pneutronik available. 1) Feintool GKP-F 160, year of manufacture: 2001, cutting force: 100t, total pressing force: 160t, head pressure: 40t, table pressure: 50t, stroke rate: 70/min, power: 22kW, max. material thickness: 6mm, stroke height: 62mm, machine dimensions X/Y/Z: approx. 1800mm/1800mm/2800mm, weight: approx. 9000kg, control: Pneutronik. 2) Feintool GKP-F 160, year of manufacture: 2003, cutting force: 100t, total pressing force: 160t, head pressure: 40t, table pressure: 50t, stroke rate: 70/min, power: 22kW, material thickness: 6mm, stroke height: 60mm, machine dimensions X/Y/Z: approx. 1800mm/1800mm/2800mm, weight: approx. 9000kg, control: Pneutronik. Presumably there is bearing damage to the flywheel. 3) Feintool GKP-F 250, year of manufacture: 2000, total pressing force: 250t, head pressure: 75t, table pressure: 75t, ejector force: 18t, material thickness: 10mm, lifting height: 61mm, machine dimensions X/Y/Z: approx. 2100mm/3100mm/3200mm, weight: approx. 14500kg, control: Pneutronik. Presumably there is bearing damage to the worm shaft. Documentation available. On-site inspection is possible. Dodpfxeu Dalys Ab Tjcr

Condition: ready for operation (used), Year of construction: 2008, Pressing force: 3200kN, enlarged stroke: 810mm, working width: 4050mm, ram speed: downwards: 130mm/s, pressing: 6.5mm/s, upwards: 75mm, stop time: 109ms, safety distance: 174mm, weight: approx. 29000kg, operating hours: 16010h, control: Cybelec ModEva 15S. Including 4 bending aids and angle measuring sensor. Dies, embossing tools, pointed punches, roe foot punches, closing bar, extension for upper tool, radius tool and adapter available on request. Documentation available. Dcsdpfx Abjwxb Igs Tor

Year of construction: 1995, condition: ready for operation (used), A Promecam (Amada) APX 103 CNC press brake is available. Pressing force: 1000kN, working width: 3000mm, column distance: 2550mm, gap opening: 370mm, stroke: 100mm, column depth: 400mm, infeed speed: 70mm/s, bending speed: 9mm/s, return speed: 85mm/s, drive power: 10.5kW. Machine dimensions X/Y/Z: approx. 3500mm/2200mm/2300mm, weight: approx. 6400kg, control: Amada Operator, operating hours: 36261h. The press is still in operation, therefore the operating hours change continuously. Documentation available. On-site inspection is possible. Dcedpfx Aowm Nn Rob Tjr

Year of construction: 2000, condition: ready for operation (used), Working width: 2500mm, max. sheet thickness aluminium/steel/stainless steel: 3mm/2mm/1.25mm, feeding length range: 575mm-2500mm, feeding width range: 210mm-1500mm, max. bending height: 200mm, max. negative bend: 35mm, max. diagonal twist: 3300mm, rotary table position: 0°/90°/180°/270°, working height: 1150mm. Clamping stroke: 210mm, clamping force: 240kN, clamping lowering and return speed: 50mm/s, upper beam swivel range: 135°, upper beam swivel speed: 90°/s, lower beam swivel range: 135°, lower beam swivel speed: 90°/s. Machine dimensions X/Y/Z: approx. 4050mm/1600mm/2400mm, weight: approx. 13000kg. Documentation available. An on-site inspection is possible. Dcodpew N Shksfx Ab Ter