Used Cnc Lathe Machine for sale (83,991)

Condition: good (used), Year of construction: 1998, turning diameter max. 250 mm control Fanuc 16 T 2 toll turrets 2 x 12 tool taper HSK 63 frequency 50 Hz Bljdjqn A Rgopfx Ab Ter ampere 168 A Chip conveyor: JAKSS Filter system: JABelade

Condition: used, Year of construction: 2018, operating hours: 2,900 h, functionality: fully functional, Perfect machine, for example, for the production of artillery shell housings according to NATO standards or ideal for industries like oil and gas, construction, aerospace and shipbuilding. Very good condition and immediately available. The machine has seen very little use and is in absolutely like-new condition. 21" Doosan Puma 600L 3200 CNC lathe with steady rest (automatically adjustable steady rest) Year of manufacture: 2018 Including steady rest Machine operating hours: 2,036 hours Bedpfx Asxz Hbujb Tslr Technical specifications: CNC control: Fanuc 32i-MA Max. turning diameter: 900 mm Max. turning length: 3,200 mm Chuck size: 21" Spindle bore: 152 mm Number of tool stations in turret: 12 X / Z travels: 940 mm / 3,200 mm All further information available on request. The machine can be demonstrated under power at any time on site.

Condition: excellent (used), Year of construction: 2018, Maximum cutting diameter 356mm, maximum machining length 406mm, bar capacity 63.5 mm, spindle speed 4,000 rpm, Bjdpfsxz Ekuex Ab Tjlr 20 hp spindle motor, 12 station turret, coolant and tool setter.

Condition: used, Year of construction: 2006, functionality: fully functional, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station Bodpfx Aboxz D Rgs Telr C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600 4 driven axial tool holders 2 driven radial tool holders

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 2,450 h, machine/vehicle number: LST3015F1 / 30158295, control type: CNC control, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, For sale is a high-performance and reliable CNC laser cutting machine from AMADA, model FLC3015AJ with a 2 kW fiber laser source, manufactured in December 2017. The machine is fully operational, in good condition, and ready for immediate use. This system is perfectly suited for precision metalworking, and comes fully equipped with extensive accessories such as an extraction unit, pallet changer table, chiller, and light protection system. Technical Data: • Manufacturer: AMADA • Model: FLC3015AJ Fiber Laser 2000 • Year of manufacture: 2017 • Laser power: 2,000 W (fiber laser) • Working range (X/Y): 3,070 × 1,550 mm • Machine weight: approx. 11,200 kg • Control: AMNC 3i with 21” monitor • Pallet changer: AMADA LST3015F1, 3,000 kg, YOM 12-2017 • Extraction system: Herding Comp 1500-8/9 SB, 7.5 kW, YOM 2018 • Chiller: KKT Chillers YBOXX 12, YOM 2018 • Laser welding source: AMADA AJ2000, 2.1 kW • Connected load: max. 8.8 kVA • Safety features: Light curtain protection system ✅ Condition and Notes: • The machine is in well-maintained, used condition • Fully operational and regularly serviced • Includes full equipment package for immediate commissioning • On-site inspection and testing can be arranged by appointment — Location for inspection and pickup: 12277 Berlin Price: €115,000 net plus 19% VAT or Bodpfx Aboxftpae Tolr Net Export Pickup only – disassembly and transport to be managed by buyer or upon agreement If interested or if you have any questions, please feel free to send me a message. Additional photos and technical details available upon request. All information provided without guarantee, subject to errors and prior sale. Net export price. For domestic deals, plus 19% VAT. For further questions, please call or email. We accept trade-ins and can offset the value of your used vehicle. We also accept defective vehicles, those due for TÜV, or with damage as down payment or part exchange. Trucks, cars, vans, and construction machinery. Just contact us. Nous parlons Français / Мы говорим по-русски We speak English / Noi vorbim românește Viber / WhatsApp / Skype For an extra fee, we handle all customs and registration formalities. We can also arrange transport to the port at additional cost.

Condition: excellent (used), functionality: fully functional, turning diameter over cross slide: 1,000 mm, turning length: 7,000 mm, turning diameter: 1,250 mm, spindle bore: 130 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 10 rpm, swing diameter over bed slide: 1,250 mm, chuck outer diameter: 1,200 mm, very nice Heyligenstaedt lathe wit R&D control, 2 fixed steadies, 4-jaw chuck 1200 mm, all manuals present Blsdpfeu R Tl Hjx Ab Tsr

Condition: used, Year of construction: 1989, functionality: fully functional, The digital stand control-unit visible in the pictures and video is not included (it is visible because it is interchangeable between machines). The machine operates with its own controller. Bledpfx Abexz Awre Ter

Condition: excellent (used), Quality Vision OGP SmartScope FLASH CNC 300 For sale is an OGP SmartScope FLASH CNC 300, a high-quality multi-sensor coordinate measuring machine for precise 2D/3D measurement tasks. This system comes from industrial use and is ideally suited for quality assurance, production, toolmaking, and laboratory applications. Description: The FLASH CNC 300 is a CNC-controlled optical measuring system with optional laser and touch probe technology. It enables highly precise measurement of mechanical components – e.g. diameters, heights, distances, contours, and geometric elements. Thanks to its video technology, motorized zoom optics, and multi-sensor-capable architecture, it is particularly versatile in application. Technical Data: Model: SmartScope FLASH CNC 300 Manufacturer: Optical Gaging Products / Quality Vision International (USA) Measuring range (XYZ): 300 × 300 × 250 mm Max. workpiece weight: up to 30 kg System weight: approx. 160 kg Power supply: 230 V~, 50/60 Hz, 2.5 A Shipping weight (packed): approx. 340 kg Measuring Methods & Equipment: Optical video system with motorized 12:1 AccuCentric® zoom Automatic zoom calibration for highest repeatability LED illumination: - Transmitted light (profile) - Coaxial incident light - SmartRing™ LED ring light Optionally usable sensors: - Laser (TTL laser) - Touch probe / scanning probe - Microprobes / height measurement Supported software (model-dependent): Measure-X, ZONE3, etc. Fields of Application: - Quality assurance - Batch and single part inspection - Measurement of plastic, metal, and milled parts - Precision optics, mold, and tool measurement - Laboratory, production, and research Condition: used Bsdpfoxz A Evex Ab Tslr Scope of supply: (see image) (Specifications are subject to change and errors excepted!) We would be happy to answer further questions for you by phone.

Condition: excellent (used), Year of construction: 2023, Distance between Centres 1000mm, Swing 360mm, Swing over cross-slide 225mm, Spindle Speed 50-4000rpm, 52mm spindle bore, Prototrak RLX control, Bodpfxjxz Dqgs Ab Tslr toolpost, 3 jaw chuck, Coolant, interlocked guards

Condition: excellent (used), Year of construction: 2003, Deep Hole Drilling and Milling Machine TBFZ 1600 CNC Bodpfexz Aygjx Ab Telr Year of manufacture: 2003 X-AXIS TRAVEL: 1600 MM Y-AXIS TRAVEL: 1200 MM Z-AXIS TRAVEL: 500 MM W-AXIS TRAVEL: 1200 MM B-AXIS TRAVEL: 360° (Rotary table) * Table size (LxW): 1500x1500 mm * T-slots: 5x DIN 650-22 h12, 150 mm spacing * Tool clamping: hydraulic * Electrical connection: 400 V, 50 Hz * Compressed air connection: rated flow rate 7000 l/min, operating pressure: 6 bar * Botek driller optionally available * Feed drive: brushless AC servo motors * Feed rate: 0-20000 mm/min * Rapid traverse: X 20000 mm/min, Y+Z 20000 mm/min * Manual mode: 20000 mm/min * Setup operation: 0-2000 mm/min

Condition: excellent (used), Year of construction: 2000, Operating hours: approx. 28,000 Blodpjxzzq Djfx Ab Tjr

Condition: good (used), Year of construction: 2008, control type: CNC control, Stainless steel tube diameter: up to 42 x 2.0 mm Steel tube diameter: up to 42 x 3.0 mm Max. bending angle: +/- 180 + 10° Section modulus: 4.1 ccm Operating pressure: 6 bar Total power requirement: 5.5 kW Machine weight approx.: 3 t Space requirement approx.: 6100 x 2300 x 1300 mm Blsdpfjx A Tu Rjx Ab Ter

Condition: used, Year of construction: 1989, functionality: fully functional, The digital stand control-unit visible in the pictures and video is not included (it is visible because it is interchangeable between machines). The machine operates with its own controller. Blodoxz Arvepfx Ab Tsr

Condition: good (used), Year of construction: 1980, functionality: fully functional, turning length: 1,580 mm, turning diameter: 510 mm, spindle bore: 80 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 6 rpm, travel distance X-axis: 450 mm, travel distance Z-axis: 1,060 mm, rapid traverse X-axis: 10 m/min, rapid traverse Z-axis: 12 m/min, quill travel distance: 130 mm, overall weight: 6,800 kg, spindle nose: M.T. No. 5, Manufactured by Mazak (Japan) Year of manufacture 1980 CNC control: Fanuc 6T Max. swing, mm 510 Standard cutting diameter, mm 305 Distance between centers, mm 1580 Turret travel, mm: X axis 450 Z axis 1060 Hole through spindle, mm 80 Spindle center, M.T. No. 5 Spindle speed range, rpm 6...3000 Turret rapid traverse, mm/min: X axis 10000 Z axis 12000 Bledex A Tb Depfx Ab Tsr Tailstock spindle travel, mm 130 Main drive motor, kW 22 Machine weight, kg 6800

Condition: good (used), Year of construction: 2012, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 250 mm, workpiece weight (max.): 40 kg, total height: 1,778 mm, total width: 1,027 mm, total length: 1,407 mm, overall weight: 579 kg, Immediately available. Nationwide delivery within a maximum of 7 days after order. General machine data: Bedow Hqx Repfx Ab Telr Machine type: Quick Vision Apex CNC Year of manufacture: Mid 2012 Manufacturer: Mitutoyo Measuring range: 400 x 400 x 250 mm Control unit: Mitutoyo QV Remote Box Operating manual: Available Hardware and software configuration: Computer/CPU: Brand new unit Monitor: Brand new unit Software: Mitutoyo QVPAK V13.2 Probe holder: Renishaw PH-6 with PI200-3 Probe: Renishaw TP200 Power supply: Mitutoyo Power Supply Unit 600 Additional accessories: Objectives - 02AKT250 1x & 02AKT300 2.5x This Mitutoyo Quick Vision Apex CNC from mid-2012 is designed for versatile measuring applications. Equipped with modern hardware and the latest Mitutoyo software, it offers high precision and reliability. The comprehensive accessories—including the Renishaw probe and calibration sphere—enable a wide range of measurement tasks. Kneissl Messtechnik GmbH is a trusted Mitutoyo partner. Thanks to our close cooperation, we can respond to individual customer requirements and implement specific modifications to the Mitutoyo Quick Vision Apex.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Reishauer RZ 362A with approx. 60 sets of diamond wheels Grinding worm dimensions: Min/Max. outside diameter: 280/350 mm Width: 84/104 mm Bledpfx Ajxb Ufueb Tor Max. module with restrictions: MOD 8.0 (DP 3.2) Number of starts: with restrictions up to 3 Max. usable width (axial shift): 90 mm For detailed technical information, please refer to the attached PDF file. Accessories: Dressing device Approx. 60 sets of diamond wheels Grinding stones Turbo separator

Condition: used, Year of construction: 2014, functionality: fully functional, turning length: 3,200 mm, turning diameter: 900 mm, spindle speed (max.): 1,500 rpm, travel distance X-axis: 470 mm, travel distance Z-axis: 3,235 mm, spindle motor power: 45 W, total height: 2,780 mm, total length: 7,360 mm, quill travel distance: 150 mm, quill diameter: 160 mm, swing diameter over cross slide: 800 mm, overall weight: 21,800 kg, swing diameter over bed slide: 1,030 mm, bar passage: 164 mm, spindle nose: A1-15, Doosan Puma 700L Large Capacity Lathe Blsdpfx Abswqf Uuo Tsr Built 2014 Accessories include Swarf Conveyor, Tailstock with Mt #6 Taper, SMW Hydraulic Steady, 800mm 3 Jaw Chuck, FANUC 32i Control.

Condition: good (used), Year of construction: 2005, control type: CNC control, - Max. bending angle: +/- 180 + 10° - Tube feed length: 4100 mm - Round steel tube up to 30 x 2.2 mm² - Round stainless steel tube up to 30 x 1.5 mm - Square tubes: 20 x 2.5 mm - Bending time for 90 degrees: 1.5 sec (advance) - Longitudinal feed speed: 450 mm/sec - Maximum bending radius: 125 mm Bledpex A Tuqsfx Ab Tsr - Freestanding bending head, 850 mm long - Bending axis drive: electrohydraulic

Condition: used, Year of construction: 1990, functionality: fully functional, Type: CNC Turning Center Manufacturer: Leadwell Model: ECO 250 HS Year of manufacture: 1990 Serial number: L290009025 Condition: Used Blodpexz Akxefx Ab Tjr Quantity: 1

Condition: excellent (used), Year of construction: 1997, Control Fanuc Series 20-T Turning diameter 330 mm Bar diameter 42 mm Turning length 650 mm Speed 5,000 min-1 8-position turret Minimum quantity lubrication Bedpswh U Dtsfx Ab Tjlr

Condition: good (used), Year of construction: 2012, 900mm Swing, 650mm max. machining diameter, 992 mm maximum turning length, 1500rpm spindle, 165mm bar capacity, 10 station turret 45kW spindle motor, Bedpfxownfzcs Ab Tjlr FANUC control, 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant,

Condition: excellent (used), Year of construction: 2021, Mazatrol SMOOTH control unit Max. Swing diameter: 695 mm Max. Machining diameter: 340 mm Max. Bar diameter: 35 mm Bedpfxswlu Ndj Ab Tolr Turning length: 600 mm Spindle speed 6,000 min-1 Counter spindle 12-position turret with driven tool Chip conveyor FMB bar feeder SL 80V

Condition: excellent (used), Year of construction: 1998, Heidenhain CNC-Pilot 3190 control Swing diameter 570 mm Turning diameter 420 mm Turning length 600 mm Spindle speed 5,000 rpm 12-position turret Bodow Rc Hyspfx Ab Tolr Tailstock Chip conveyor Various tool holders

Condition: excellent (used), Year of construction: 1999, Fanuc 21T control system Turning diameter 158 mm Swing over bed 340 mm Blodpewmzhpefx Ab Ter Speed 6,000 rpm 8-station turret Tailstock 3-jaw chuck, 2-jaw chuck, collet chuck Collets Various tool holders

Condition: excellent (used), Year of construction: 2003, Siemens 840D control system Turning diameter 254 mm Turning length 500 mm Chuck diameter 210 mm Turning length 410 mm Spindle speed 4,500 rpm Bledpfxewv Hq Io Ab Tsr 8-position turret Chip conveyor