Used Cnc Fräsen Center for sale (20,282)

Condition: good (used), Year of construction: 2009, Ref. -No.: 10026 Manufacturer: SCHIESS Type: VMG4 MA90 Year of construction: 2009 Type of control: CNC-Steuerung Control: Siemens Sinumerik 840 D Storage location: Halberstadt Country of origin: Deutschland Turning Diameter: 5000 mm Turning Diameter Over Bed: 4000 mm Spindle Speeds: 0 - 120 RPM Clamping Diameter: 4000 mm Cross Travel: 420 x 340 mm Max workpiece height: 3000 mm Main Drive: 52 kW Max. Tension: 120000 N Max. Payload: 50 t Power Capacity - Table: 110 kW Max torque faceplate: 100 kNm Further information: Automatic tool changer with 80 positions (AAC) Automatic attachment changer for 6 milling heads Live spindle C-axis table Travel of the Y-axis gantry columns Drilling and milling head (master head principle) Straight drilling and milling head GB-1B Renishaw RBP 60 touch probe Hand terminal Teleservice Internal and external coolant Operator cabin Chip conveyor SADDLE (X-AXIS): Horizontal movement from the center to the right side 4,800 mm Horizontal movement from the center to the left side 3,100 mm Vertical distance between the saddle rails 1,400 mm Speed / range 0 - 16,000 mm / min GANTRY TRAVEL (Y-AXIS): Gantry stroke 5,000 mm Feed 0 - 16,000 mm / min RAM (Z-AXIS): Maximum cutting force when turning 60 Kn Enter minimum bore 550 mm Guide length 1,600 mm Speed / feed range 0 - 16,000 mm/min Spindle speeds: Range 1 rpm Dsdpfx Aszx Nw Tjiiscp Range 2 0 - 1,100 - 3,150 rpm Spindle torque: Range 1 2,400 - 2,400 - 850 Nm Range 2 450 - 450 - 160 kNm

Condition: good (used), Year of construction: 2014, Ref. -No.: 10654 Manufacturer: DMG Type: DMU DMC 80 FD duoblock Year of construction: 2014 Type of control: CNC Control: Siemens Sinumerik 840 D Storage location: Halberstadt Country of origin: Germany X-Travel: mm Y-Travel: 1050 mm Z-Travel: 850 mm B-Axis: 180 ° C-Axis: 360 ° Machine length: 5100 mm Machine width: 2500 mm Machine Height: 3100 mm Tool Taper: HSK - 100 Numbers Of Tools In Magazin: 243 Turning Speeds: 10000 RPM Max. Torque: 2050 Nm Feed Speeds X/Y/Z Axis: mm / min Rapid Travel X/Y/Z: 60 mm / min acceleration: 7 / 7 / 7 m/s² Total Power Requirement: 36 kW Weight Of The Machine Ca.: 15300 t Spindle speed gear stage 1: min Dedpfe Ahmvxex Aiiocp Spindle speed gear stage 2: min Holding torque: 3400 Nm Max. rotation of the table top: rpm Resolution of the measuring system: 0,001 ° Pallet clamping surface: Ø x 630 mm Weight of the pallet: 300 kg Feed force in X and Y axes: 13 Feed force in the Z-axis: 9 furnishing operation: 20 - 2000 m / min Further information: The machine can be viewed while it is powered on, subject to prior arrangement.

Condition: good (used), Year of construction: 2014, Description: The machine is in good technical condition, and a test run is possible upon prior arrangement. It is more suitable for serial production; it also includes a feeder and an output belt for finished parts. It comes with accessories – 2 universal chucks, clamps, and holders. Dcsdpfxsz S Hnhs Aiiop Parameter PUMA MX 1600 ST Max. machining / turning diameter: 330 mm Recommended turning diameter: 170 mm Max. machining length: 900 mm Diameter over bed: 680 mm Diameter over carriage: 630 mm Bar diameter: approx. 51 mm Standard chuck: 6" Main spindle – speed: 6,000 rpm Main spindle – power: 15 / 11 kW Max. torque of main spindle: approx. 208 Nm Spindle nose: A2-5 Tailstock – speed: 6,000 rpm Tailstock – power: 15 / 11 kW Tailstock – nose: A2-5 Milling spindle: 12,000 rpm Power of milling spindle: 9 kW Torque of milling spindle: approx. 49 Nm Y-axis: 170 mm (??85 mm) B-axis: ??120?? / range 240?? X1: 450 mm Z1: 935 mm X2: 165 mm Z2: 925 mm Tool magazine: 40 positions Max. tool Ø: 70 / 95 mm Max. tool length: 200 mm Tool change time: approx. 2.1 s Lower turret: 16 positions, BMT45 Driven tools of lower turret: 6,000 rpm Power of driven tools: 5.5 kW Control system: Fanuc 31i-A Weight: approx. 11,600 kg Dimensions: approx. 3,800 × 2,530 × 2,760 mm

Condition: reconditioned (used), Haas ST-30 CNC Lathe / Turning Centre (2015) Haas Classic CNC Control Standard chuck diameter: 254 mm / 10″ Maximum turning diameter: Up to 533 mm Maximum cutting length: 660 mm Bar capacity: 76 mm / 3″ Spindle bore: 88.9 mm Maximum spindle speed: 3,400 rpm Maximum spindle power: 22.4 kW / 30 hp Standard maximum spindle torque 407 Nm at 500 rpm Spindle nose: A2-6 X-axis travel: 318 mm Z-axis travel: 660 mm Rapid traverse, X and Z: 24 m/min Tool turret” 12 stations Swing over front apron: 806 mm Swing over cross-slide: 527 m Supplied With: Three-jaw power chuck, 12-station tool turret with assorted holders, Tailstock with centre, Fully enclosed machining area, Haas control with colour screen and handwheel. For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79298 Machine Serial Number: 3103531 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Dcsdpe Agn Dcjfx Aiiop Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2012, functionality: fully functional, DOOSAN PUMA 2600S – CNC turning center with subspindle, FANUC, year 2012 We offer for sale a DOOSAN PUMA 2600S CNC turning center with subspindle, equipped with a reliable DOOSAN-FANUC i Series control system. The machine is in operation and can be demonstrated and tested upon request. Technical specifications: Manufacturer: Doosan Infracore Model: PUMA 2600S Year of manufacture: 09/2012 Serial number: ML0218-000034 CNC control: DOOSAN-FANUC i Series Configuration: main spindle + subspindle Max. turning diameter: approx. 376 mm Max. turning length: approx. 760 mm Main spindle chuck: approx. 10" Bar capacity through main spindle: approx. 76 mm Max. main spindle speed: approx. 3,500 rpm Main spindle power: approx. 18.5 / 22 kW X-axis travel: approx. 260 mm Z-axis travel: approx. 830 mm Turret: 12 positions Automatic subspindle for complete part machining Chip conveyor Rated machine power: 40.7 kVA Power supply: 200/220 V, 3 phases, 50/60 Hz Machine weight: 5,400 kg Robust CNC turning center suitable for both series and single-piece production. Thanks to the subspindle, it enables machining of the part from both sides without the need for manual switching between individual operations. Dodpfx Aij Acnp Tsijcp The machine is currently powered on and can be demonstrated in operation.

Condition: good (used), Year of construction: 2021, Ref. -No.: 10630 Manufacturer: MATEC Type: HV 700 Year of construction: 2021 Type of control: CNC-Steuerung Control: Heidenhain TNC 640 Storage location: Halberstadt Country of origin: Germany X-Travel: 2600 mm Y-Travel: 700 mm Z-Travel: 950 (horizontal) / 900 (vertikal) mm Swivel range: ± 105 ° Table speed range: max. 700 min/-1 Tool Taper: HSK-A63 Numbers Of Tools In Magazin: 50 Turning Speeds: 20 - 15.000 RPM Dcodpfx Aij Ahmvmoijp Max. Torque: 195 (40 % ED) / 150 (100 % ED) Nm axes: 5 + Spindel Drive Capacity - Spindle Motor: 41 (40 % ED) / 31 (100 % ED) kW Operating hours: Steuerung ein 19.381 / Maschine ein 7.220 / Programmlauf 2.285 H Internal cooling: 20 / 40 bar Holding torque: 5.000 Nm NC rotary table: 2.000 kg Tabletop C-axis: NC-Rundtisch Ø 750 mm, im Maschinentisch eingelassen Further information: - NC swivel head, infinitely variable ± 105°, torque drive, swivel radius 250 mm - Motor spindle HSK-A63, 20 - 15,000 rpm, 41 kW (40 % duty cycle) / 31 kW (100 % duty cycle) - NC rotary table Ø 750 mm recessed into the machine table (torque drive, max. 700 rpm, indexing accuracy ± 2.5", max. load 2,000 kg) - Direct measuring system X, Y, Z axes (absolute) - 50 tool pockets - Internal coolant supply 20 bar and 40 bar with paper band filter (450 l) - Hydraulic motor spindle clamping for turning operations - Partition wall for pendulum (dual-station) machining - Automatic safety doors - 3D touch probe with radio transmission - Renishaw RTS tool setting probe with radio transmission (2 pcs) - Software option KinematicsOpt incl. calibration ball with holder - Dynamics package for free-form surfaces - Collision monitoring SETAC-ADVANCED - Electronic handwheel (portable) - Full work area enclosure with roof - Bellows with steel slats - Chip conveyor, special version for high-volume machining - Mechanical air filter CMC 1500 (2 pcs) - Cooling unit for electrical control cabinet - Flushing gun - Central oil lubrication - LED work area lighting - Installation elements The machine can be viewed under power by arrangement.

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Video available at: Base machine - Dynestic 7535-R Automatic 12.7 Dynestic table For classic nesting machining with wear plate Machining length: 3700 mm Working direction: from right to left Machine frame in welded construction with ground and hardened prism guides for the traversing carriage, aggregate head and consoles Traversing carriage in gantry design Rack and pinion drive, helical, in X and Y direction, Ball screw spindles Z-axis for precise positioning Technical data: Djdezt Twyepfx Aiiecp Machining dimensions: Max. load on nesting table X = 3700 mm Y = 2200 mm Max. travel distances X = 5295 mm Y = 2935 mm Z = 565 mm Max. clearance height DYNESTIC table Z = 250 mm from the top of the table (without wear plate) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood with pneumatic height adjustment and viewing window Voltage 400 V, 50/60 Hz CONTROL: Dual-core processor Operating system: Windows XP 80 GB hard drive / 1 GB RAM RJ45 network connection 10/100 Base-T Fast Ethernet US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD burner) Remote maintenance Integrated network card for data transmission of control and program data. Data transmission via high-speed internet connection Requirement: High-speed internet connection to the machine. DYNESTIC table Solid, continuous machining table with grid spacing, continuous grooves in X and Y direction, Groove spacing: 50 mm with 25 meters of sealing cord for securing the wear plate 1 machining field with stop strips / stop Height: 30 mm, pneumatically lowerable 2 stop strips in Y direction and 1 stop in X direction on the right (when viewed from the front of the machine) Vacuum fields 1-circuit vacuum system Drilling unit 7881-R, 24 spindles Drive power 3.0 kW, incl. saw unit 18 vertical spindles individually selectable Arrangement in L-shape, 11+2 in X and 6 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from the mounting end (depending on plate thickness) Spindle extension stroke: 70 mm Rotation direction: alternating clockwise / counterclockwise n(max.) 1000 - 5710 min-1, infinitely variable Mount: M 10 thread - clearance fit 11 mm without tool, without mount 6 horizontal spindles 2 twin drill spindles in X direction (distance 32 mm between 1st and 2nd horizontal drill spindle) 1 twin drill spindle in Y direction Mount: M 10 thread, clearance fit 11 mm Total drill length max. 70 mm from the mounting end without tool, without mount Pressure booster, increases the standard pressure from 6 to 8 bar 5-axis milling unit 7844, Power: 10.0 kW (S6) cardanic, C-axis rotatable +/- 360°, A-axis rotatable +/- 180° n(max.) = 0 - 24000 min-1, infinitely variable, max. power at 12000 min-1 to 24000 min-1 Liquid cooling (cooling unit included) with HSK-F 63 tool holder with right-hand thread (for right-hand cutting tools) with collet chuck with HSK shank Ceramic ball bearings (hybrid bearings) Tool weight max. 6 kg (incl. holder) Tools:

Condition: good (used), Year of construction: 2013, 230mm Swing, 230mm Max Turned Diameter, Djdpfx Aisz Sqcvoiecp 230mm maximum turning length, 12 + 12 Station Turrets, 65mm Bar Capacity, 5000rpm 15KW Main Spindle, Fanuc 31i Control, C Axis to both Spindles, 5000rpm Sub Spindle, +/-50mm Y axis, coolant, swarf conveyor, tool setter, parts catcher, Magazine Bar-feed.

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 665182, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, total height: 2,850 mm, total length: 3,300 mm, total width: 2,400 mm, overall weight: 9,000 kg, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, Equipment: documentation/manual, OPS INGERSOLL SPEED HAWK 650 CNC machining center - Important note: the spindle was replaced in 2025 for approximately EUR 40,000, resulting in very few spindle operating hours! - Pallet dimensions: approximately 320 x 320 mm - The pallets are clamped onto the rotary table - Tool holder: HSK-E 40 Dsdpsy Tvcujfx Aiijcp - For further technical data, see the images - With technical documentation - With HSK-E 40 tool holders and three pallets Attention: The item must be picked up between July 21st and July 23rd, 2026, on a date to be confirmed. FCA D-73529 Schwäbisch Gmünd - loaded onto a truck

Condition: ready for operation (used), Year of construction: 2012, operating hours: 10,000 h, functionality: fully functional, turning length: 1,000 mm, turning diameter over cross slide: 800 mm, spindle motor power: 26,000 W, spindle speed (max.): 4,000 rpm, spindle bore: 91 mm, travel distance X-axis: 370 mm, travel distance Y-axis: 70 mm, travel distance Z-axis: 1,050 mm, rotational speed (max.): 4,000 rpm, feed length X-axis: 25,000 mm, feed length Y-axis: 15,000 mm, feed length Z-axis: 30,000 mm, total height: 2,574 mm, total length: 3,930 mm, total width: 2,280 mm, spindle nose: A2-8, overall weight: 9,100 kg, Equipment: documentation/manual, The Mori Seiki NZX 2500/1000Y is an extremely robust and versatile CNC turning machine, designed for companies that demand high levels of productivity, accuracy, and flexibility. The machine is equipped with a Y-axis, which, in addition to conventional turning operations, enables complex milling and drilling operations. In combination with powered tools, this offers extensive possibilities for completely machining workpieces in a single setup. Dsdpfxoz R T Exe Aiijcp The two turrets provide a large tool capacity and enable simultaneous operations. This makes the NZX 2500/1000Y particularly suitable for complex workpieces and series production. Additional options & accessories: - Double turret configuration (Turret 1 and Turret 2) - Y-axis - Powered tools - Interface for bar feeding - SMW Autoblok (SLU-X-2_ZS) hydraulic chuck - Renishaw measuring arm for tool measurement on Turret 1 and Turret 2 - High-pressure pump - HAINBUCH SPANNTOP nova Kombi Axfix Gr. 65 chuck - Various tool holders (powered and static) - All original Mori Seiki documentation Weight & dimensions: 9100 kg approx. 3930x2280x2574 mm (LxWxH)

Condition: used, Year of construction: 2018, operating hours: 5,200 h, functionality: fully functional, spindle bore: 52 mm, spindle diameter: 200 mm, VICTOR P20 8 INCH BAR CAPACITY 52 MM WITH LINEAR SLIDE 2018 MODEL CAN BE SEEN IN WORKING CONDITION Dodpfx Aio Afpbpeijcp THE MACHINE CAN BE SEEN IN WORKING CONDITION AT OUR TEKIRDAG CORLU WAREHOUSE.

Condition: good (used), Year of construction: 1990, Johnford 5 VH Milling machine by Johnford with Fagor digital readout, year of manufacture 1990, in good condition CE-compliant!! Technical data: Dcodpeyalc Asfx Aiiep Year of manufacture: 1990 Working area Table clamping surface: 1370 mm x 250 mm Maximum table load: 350 kg Travel distances X-axis travel: 800 mm Y-axis travel: 390 mm Z-axis travel: 380 mm Vertical milling head Spindle speed (vertical): 70 rpm - 3600 rpm Spindle taper: SK40 DIN 2080 Quill stroke: 127 mm Feed Quill feeds (3): 0.04; 0.08; 0.15 mm/rev Drive power Main drive motor output: 3.75 kW Dimensions and weights Dimensions (L x W x H): 2.54 m x 2.16 m x 2.24 m Weight: 1590 kg About the machine: This versatile universal milling machine combines all the advantages of the world’s best-selling milling machine with additional stability. Belonging to the category of conventional milling machines, it stands out as the top model of the 5 VH series with an SK 40 tool taper and a 30% higher net weight. Both the X and Y axes are equipped with infinitely variable feed units. The swiveling vertical milling head offers a wide speed range for machining steel and non-ferrous metals. Further features include a four-stage automatic quill feed, pneumatic tool clamping, and a large table for workpieces and clamping devices. Further milling machines from well-known manufacturers can be found on our website.

Condition: ready for operation (used), For sale: 4 Mazak machines – 1 milling machine and 3 lathes, all in working condition. Must be sold due to lack of space. 1 FJV 25 2 Qturn 8 Dcjdpfx Aij Agpy Hjisp 1 Qturn 6 with robot Total price: €14,000.

Condition: excellent (used), Year of construction: 2020, This NTX 2500/1500 Second Generation is a fully equipped turn-mill center featuring a separate milling spindle and B-axis, designed for more complex 5-axis machining operations. Spindle hours: ca 7800h Control unit Fanuc F31iB5 with CELOS Ergoline (NTX Gen2) XYZ Travel 675 mm (-125+500) x 300 mm (±150) x 1562 +164mm for ATC Turning length 1530 mm Turning diameter 670 mm B-axis 240°(±120°) Main spindle speed 4000 rpm Through spindle hole 91mm Sub-spindle speed 4000 rpm Main spindle chuck 304mm (KITAGAWA B212) Sub-spindle chuck 304mm (KITAGAWA N-12A) Tool spindle speed 12000 rpm Toolchanger 76 ATC Spindle taper CAPTO C6 Machine weight 18160 kg Machine Height 2750 mm Machine floor space 6250 x 2830 mm Including: Renishaw RMP60 workpiece measuring system Tool presetter Chip conveyor Automatic Centering Steady Rest SMW Mist collector Interlit-TMF300/600 compact filter unit 70 bar Paper belt filter TMF300, tank volume 600L high pressure pump 70 bar - 32 L/min Workpiece unloader, conveyor and stocker Etc. Full technical description and options in the attached document. Machine can be viewed in operation upon appointment. Available for immediate delivery. Dodpfxe Afnzhs Aiiecp Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: used, Year of construction: 2007, Machine design: Cantilever machine Travel in X-direction: 5000 mm Travel in Y-direction: 1815 mm Travel (Z-axis): 600 mm Clearance height: 370 mm Number of main spindles: 1 Main spindle power: 12 kW Main spindle speed: 600-24000 rpm Vector-controlled spindle: Yes Clamping system: HSK-63 F Spindle cooling: Liquid cooling Number of axes: 5 Tool changer: Disc tool changer Tool change positions: 24 Back wall milling units: Yes Vertical drilling spindles – in X-direction: 12 Spindle speed vertical drilling spindle: 2000-6000 rpm Dcsdpfxszwg H Aj Aiiep Horizontal drilling spindle in X-direction: 2 + 2 Horizontal drilling spindle in Y-direction: 1 + 1 Spindle speed horizontal drilling spindle: 2000-6000 rpm Monitor size: 15" Control type: PC control Operating system: Windows XP Typewriter keyboard: Yes Mouse: Yes Programming system: xilog Plus DXF interface: Yes Online connection possible: Yes CD-ROM drive: Yes Floppy disk drive: Yes Table design: Console table, tubeless Stop system: Stop cylinders Support arms: 8 Suction plates and clamps: various included Linear guides: 2 Number of vacuum pumps: 1 Vacuum pump capacity: 250 m³/h Alternating field configuration: Yes Safety guard, left: Yes Safety guard, right: Yes Extraction hood: controlled via axes Setup aid: Dot laser setup aid Safety features: Safety floor mats Central lubrication: automatic Tools: various tools available at an extra charge Dimensions: 7820x4730 mm Extraction diameter: 300 mm Storage location:

Condition: excellent (used), Year of construction: 2023, 400mm swing, 220mm max diameter, 490mm between Centres, Siemens 828 Control, 65mm bar capacity, 12 station VDI30 turret, 17kW Spindle Motor, Dedpfx Aoz Srv Doiiecp Spindle Speed 4000rpm, 0.001 degree C axis, +/- 35mm Y axis, low volt light, coolant, Tool setter, Tailstock, swarf conveyor

Condition: used, Year of construction: 2015, axis stroke (X,Y,Z) 6175x1550x300 mm Number of spindle head vertical 20 St. Number of spindles head horizontal 10 St. Number of milling agregates 1 St. Speed 24.000 U/min. Capacity 300 kg/h Sawing unit ja_yes 0 Control Homag PC85 CNC powerTouch HOMAG BMG 511 /60/12/F/K Profi ----- Machine already professionally dismantled and stored at our warehouse in Oberkochen: - 5-axis CNC processing center - Moving gantry machine (dual-drive gantry system) - 1 HOMAG DRIVE 5 C+ routing spindle, 5-axis, HSK-F63, 15 kW, max. 24,000 rpm - 1 HOMAG Multi Processing Unit Drilling head with 30 spindles: V20 / H10 / S360° "MPU" MultiProcessingUnit with C-axis +/- 185° - 1 Chain tool changer, 30-position - Includes SL laser projector - Includes vacuum suction cups (as available) - Spare parts and accessories as shown in photos - Last HOMAG 5-axis service: 2024 - Last HOMAG service: 2025 - Price includes professional dismantling and loading onto customer's truck - Costs for loading frames/transport securing devices NOT included; see note at the end of the description Technical Data ----- Max. workpiece lengths: All aggregates: Single 6,000 mm; Pendulum min. 1,550 mm, max. 3,200 mm Tool dia. 25 mm: Single 6,175 mm; Pendulum min. 1,550 mm, max. 3,200 mm Max. workpiece width: All aggregates, front stop 1,100 mm Milling operation tool dia. 25 mm: Front stop 1,325 mm, rear stop 1,550 mm Workpiece thickness: Max. 300 mm including clamping devices Routing spindle and drilling head ----- 2 independent Z-axes 1 HOMAG DRIVE 5 C+ routing spindle, 5-axis, HSK-F63, 15 kW, max. 24,000 rpm Liquid-cooled routing spindle, DRIVE5C+ aggregate interface with 3-point torque support 1 HOMAG Multi Processing Unit Drilling head with 30 spindles: V20 / H10 / S360° "MPU" MultiProcessingUnit with C-axis +/- 185° for drilling and sawing operations at any angle 1 motor 2.3 kW, frequency-controlled, max. speed 7,500 rpm selectable via program for rapid processing even with small diameters 20 vertical HIGH-SPEED spindles 10 horizontal spindles 1 grooving and parting saw Includes Z-axis module Includes extraction hood Tool changer: ----- 1 Pick-up station for 350 mm saw blade for DRIVE5(C)+ 1 Chain tool changer, 30-position, D=80 For tools and aggregates with HSK-F63 Chain changer with 30 tool/aggregate positions for use with machines featuring 1 main spindle 1 upstream double gripper for rapid tool changing Console table with ----- 12 consoles, Y=1,500 mm for K-table 6 lifting rails (HPL), lift 100 mm Dcodpfezqggvox Aiijp Additional accessories: ----- SPEED PACK: Increase in... Max. traverse speed of X-axis: 80 m/min; vector speed = 110 m/min Contour laser positioning aid 1 vacuum pump (300 m³/h) Chip conveyor belt with extension Vacuum clamping system SL-Laser Energy-efficient 5-axis extraction hood Safety equipment: ----- Laser, bumper SAFESCAN for Speed ??Pack CE mark HOMAG Speed ??Pack HOMAG Quality Package Enclosed energy chain Control system ----- PowerControl PC85 HOMAG powerTouch Handheld terminal HOMAG IPC Powerpack Software ----- HOMAG woodWOP 7.1 WoodScout diagnostic system MMR B...

Condition: ready for operation (used), Year of construction: 2005, operating hours: 9,091 h, functionality: fully functional, spindle motor power: 20 W, spindle speed (max.): 6,000 rpm, spindle bore: 65 mm, travel distance X-axis: 155 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 400 mm, total height: 1,850 mm, total length: 2,500 mm, total width: 1,910 mm, distance table center to spindle nose: 1,100 mm, overall weight: 4,300 kg, spindle diameter: 65 mm, feed force X-axis: 105 N, feed force Z-axis: 400 N, We are selling our INDEX G200 Compact. The machine is in excellent condition. Dedpfx Ae Ah Tn Usiiscp It will be sold including a bar loader, chip conveyor, and various tools.

Condition: excellent (used), Year of construction: 2017, operating hours: 13,426 h, functionality: fully functional, type of input current: three-phase, 7 axes: X1, X2, Y1, Z1, Z2, C1, C2 - High rigidity and high precision Dcjdpfxo Ahdrgj Aiijp - Y-axis - 2 spindles, 1 turret (8 stations plus half-index positions) - Superimposition function (synchronized, simultaneous machining): Coordinated operation of the main spindle, sub-spindle, and turret enables overlapping machining operations, significantly reducing cycle times and increasing productivity. - 173E collet chuck on the main spindle and 171E collet chuck on the sub-spindle - Maximum spindle speeds: main spindle 6,000 rpm; sub-spindle 5,000 rpm - Mitsubishi M70V CNC control - Maximum bar capacity: 42 mm - Maximum driven-tool speed: 6,000 rpm

Condition: good (used), Year of construction: 1998, operating hours: 95,843 h, functionality: fully functional, machine/vehicle number: 313369, For sale is an extremely robust and precise Gildemeister CTX 400E universal lathe, manufactured in 1998. This machine comes from a factory liquidation and is characterized by its high durability and solid construction. It is ideally suited for precise single-piece and series production. The machine is fully functional and can be inspected while powered on. Equipment: - 3-jaw chuck - 11-position tool turret (some powered tools) - Automatic tailstock - Control panel, Heidenhain CNC Pilot control system - Chip conveyor Accessories: - Workbench (5 drawers, 1 door) with partition Contents: Hand tools Attractive offer – flexible & worry-free We offer you not only a high-quality product but also tailored financing options that adapt to your needs. Whether it’s a down payment, installment payments, or individual financing models – together we will find the right solution. Upon request, we will also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process, so you don't have to worry about anything. 📞 Please contact us for more information or a non-binding offer. We will advise you personally and competently. Subject to prior sale, changes, and errors! Dcsdpfe Afpmxex Aiiop

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 25.0122, For sale is a highly precise CNC turning and milling machine, type Benzinger TNE5, manufactured in 2007. Benzinger machines are known worldwide for their exceptional mechanical rigidity, extreme repeatability, and durability. They are particularly used in the watchmaking industry, medical technology, precision engineering, and optics. This model is ideal for the complete machining of complex precision parts from bar stock or in a chuck. Thanks to its robust design and excellent thermal management, the machine is perfectly suited for tight tolerances and hard turning. Equipment: - Siemens Sinumerik control - 2 x 12-station turret - Knoll 200S-1/200 chip conveyor, year of manufacture 2006 - High-pressure hydraulic unit Terms: - ex works. Attractive offer – flexible & hassle-free We offer you not only a high-quality product but also customized financing options that adapt to your needs. Whether it's a down payment, installment payment, or individual financing models – together we will find the right solution. On request, we also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and on-time process so that you don't have to worry about anything. 📞 Please contact us for further information or a non-binding offer. We will provide you with personal and expert advice. Subject to prior sale, changes, and errors! Dcjdpe Adz Acsfx Aiiep

Condition: used, Year of construction: 2014, Processing length 3200 mm. Vertical machining center for drilling, milling, and grooving. Maximum flexibility and versatile applications with minimal space requirements. Modern industrial design, built with high-quality components, offering an optimal view of the machining process and perfect access to the tools. Machine frame in welded construction with ground and hardened prism guides. Ball screw spindles in the X, Y, and Z axes for precise positioning and perfectly fitting workpieces. Workpiece-friendly clamping system using vacuum cups with automatic cup positioning. Extremely short setup times. Workpiece fixing on the back allows machining of the entire circumference without additional re-clamping (up to workpiece lengths of 1300 mm). This ensures the fastest machining cycles and the highest accuracy. Program-controlled adjustment of workpiece thickness; material thicknesses from 8 to 70 mm are possible. 1 machining field with length stop. Material support. 1 roller track for supporting the workpieces downwards. 4 roller tracks for gentle support of sheet material. Height-adjustable infeed roller track for 4-sided milling. Complete finishing of the workpieces through precise milling of all 4 workpiece edges. Extraction: Machining head extraction with extraction nozzle Ø 120 mm and extraction nozzle in front of the drilling head Ø 140 mm, both leading upwards. Underfloor extraction with extraction nozzle Ø 120 mm; connection at the bottom on the left side or from the top of the machine. Safety guard according to CE standard. Enclosing guard with viewing window and safety interlock on the door. TECHNICAL DATA Workpiece size: X = 200 - 3200 mm (longer with additional support); Y = 70 - 920 mm. Material thickness: Z = 8 to 70 mm. Max. travel in X-direction without reclamping: X = 1500 mm. Z-travel: Z = 240 mm. Maximum programmable speed: Vector speed: 68 m/min; X = 25 m/min, Y = 60 m/min, Z = 20 m/min. MACHINE OPERATION / SOFTWARE Dcjdpfxj Ahhmbe Aiiop CAMPUS V6 - Single Evolution. Software for CNC machines of the Evolution type with automatic generation of the division of workpieces for machining. 1 software license for the machine - secured via a license plug. Consisting of: 1. CAMPUS NC-HOPS; 2. CAMPUS aCADemy; 3. CAMPUS MT-Manager; 4. CAMPUS Workcenter; 5. CAMPUS process simulation. CAMPUS NC-HOPS: Graphical variant system with WOP and CAD/CAM features for creating part variants and macro technology. CONTROL PC control. Remote maintenance: Integrated network card for data transfer of control and program data. Data transfer takes place via a high-speed internet connection. Requirement: High-speed internet connection at the machine. The use within the warranty period for warranty cases is free of charge. 19" flat screen for easy and clear machine operation. USB port for data backup or for direct input of machining programs at the control panel. DRILLING UNIT Drilling unit 7883, 15 spindles. Drive power 1.7 kW. 9 vertical spindles, individually selectable. Arrangement in L-shape, 5 in X and 4(5) in Y direction, 32 mm pitch. Max. drilling diameter: 35 mm. Total drill length: 70 mm from the mounting end (depending on plate thickness). Spindle extension stroke: 70 mm. Rotation direction: Alternating right/left. n(max.) 1000 - 4400 min-1, continuously adjustable. Mounting: M 10 thread - 11 mm smooth shank, without tool, without chuck. 6 horizontal spindles. 2 double drilling spindles in X direction. 1 double drilling spindle in Y direction. Mounting: M 10

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, turning diameter: 145 mm, CNC turning machine Gildemeister Twin 42 Year of manufacture: 2004 Control system: Siemens 840D Powerline Turning diameter: 145 mm Max. bar diameter: 45 mm Spindle head: Flat flange 120 h5 Chuck: 130 / 140 mm Main spindle speed: 20–7,000 min⁻¹ Dodpj Af I D Uefx Aiiecp Main spindle power: 28 / 22 kW (40/100 % duty cycle) Main spindle torque: 180 / 140 Nm Counter spindle: Yes, same power X-axis: 220 mm Z-axis: 320 mm Y-axis: ±30 mm Rapid traverse X/Y/Z: 30 / 15 / 30 m/min Turret: 2 × 12 stations Tool holder: VDI 25 Machine weight: approx. 5,300 kg Connected power: approx. 40 kVA Design: 60° inclined bed, linear guides Chip conveyor, Bürener type SPE 63/30-250 Z60 Tool monitoring system, Artis type CTM Tailstock mounted on counter spindle slide, tailstock stroke = 230 mm Tailstock force = 300 daN Center bore MK3 Overload clutch for the X and Z axes of slides 1 and 2 Package for bar machining consisting of: Workpiece extraction device Workpieces can be automatically unloaded from both the main and counter spindles Workpiece dimensions: Ø6 – Ø65 mm, length approx. 300 mm, max. weight 3.5 kg Collet chuck for quick-change tool holders, size 42 Hainbuch Spanntop Connection for bar feed Bar loader magazine, IRCO type SiMag 42

Condition: good (used), Year of construction: 2010, functionality: fully functional, turning length: 995 mm, turning diameter: 660 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,045 mm, rotational speed (max.): 12,000 rpm, bar passage: 65 mm, total height: 2,597 mm, total length: 3,820 mm, total width: 2,348 mm, spindle nose: A2-6, overall weight: 9,570 kg, We are pleased to offer this well-maintained CNC turning and milling machine. It is a Mazak Integrex 200-IV S, manufactured in 2010, fitted with the Mazatrol Matrix control system. Technical specifications: Dsdpez Ndu Eefx Aiiecp Turning diameter: 660 mm Max. turning length: 995 mm Bar capacity: 65 mm Travel on X-axis: 580 mm Travel on Y-axis: 150 mm Travel on Z-axis: 1,045 mm Travel on W-axis: 1,490 mm B-axis travel: –30 to 210° Main and counter spindles: 5,000 rpm C-axis indexing of both spindles: 0.001° Milling spindle: 12,000 rpm (Capto C6) Tool magazine: 40 tool positions We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: With over 40 years’ experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: excellent (used), Year of construction: 1989, For sale: CNC lathe Mazak QuickTurn 20N. The lathe is in very good condition. Equipment includes: MAZATROL T-2, MAZATROL CAM-T-2 control system. Djdoz Scfkspfx Aiiocp