Used Clamps for sale (8,606)

Year of construction: 2007, condition: ready for operation (used), Working diameter: 1500-6000mm, working length: 1200-3000mm, wall thickness: 20-70mm. Dledpfx Aenvfdusb Tsa

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 18515, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, controller model: Siemens 840 D, spindle speed (max.): 15,000 rpm, TECHNICAL DETAILS Travel X-Axis: 650 mm Travel Y-Axis: 650 mm Travel Z-Axis: 650 mm Workpiece weight (max.): 400 kg Table load: 400 kg Spindle speed (max.): 15,000 rpm Number of tool magazine slots: 240 Number of exchangeable pallets: 2 Max. pallet change time: 8 s Clamping surface / grid plate DIN 55201: 400×400 mm Division and display increment: 0.001° Max. load: 400 kg Max. rotation: 25 rpm Interference circle diameter: 700 mm Tool holder: HSK-A 63 Speed range: 50–15,000 rpm Positioning uncertainty P (X/Y/Z): ≤ 0.009 mm Positioning uncertainty Psmax (X/Y/Z): ≤ 0.007 mm MACHINE DETAILS Control model: Siemens 840 D Coolant supply: 50 bar Temperature range: 5–35°C Weight: 12,000 kg Djdpoxxxi Sofx Ab Tola EQUIPMENT Stepless speed control Chip conveyor 2-way pallet changer ICS (internal coolant supply) NC rotary table, 0.001 degree

Condition: ready for operation (used), Year of construction: 2004, operating hours: 20,092 h, functionality: fully functional, machine/vehicle number: 194573, clamping force: 1,000 kN, screw diameter: 30 mm, injection pressure: 2,500 bar, opening stroke: 500 mm, plate length: 570 mm, TECHNICAL DETAILS Clamping force: 1,000 kN First Injection Unit Dodpfexx T Dwex Ab Tela Screw diameter: 30 mm Shot weight: 65 g Shot volume: 78 cm³ Injection pressure: 2,210 bar Second Injection Unit Screw diameter: 25 mm Shot weight: 45 g Shot volume: 54 cm³ Injection pressure: 2,500 bar Tie-bar distance: 420 x 420 mm Platen dimensions: 570 x 570 mm Opening stroke: 500 mm Maximum platen distance: 850 mm Mould height: 350 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4.63 x 1.3 x 3.9 m Weight: 4,000 kg Connected load: 125 A EQUIPMENT Without rotary table 2x core pull (simultaneous stroke movement, holding pressure adjustable) Intermediate stop for hydraulic rotary control CF card drive Host computer interface Input device interface Conveyor belt interface Machine prepared for Multilift Selector unit with connection Extended installation height to 350 mm Highly wear-resistant screws Connection for air ejector unit 2-colour / horizontal-vertical injection unit Including diskettes/CF cards - complete documentation/manuals

Condition: ready for operation (used), Year of construction: 2004, operating hours: 13,812 h, functionality: fully functional, machine/vehicle number: 108877, travel distance X-axis: 900 mm, travel distance Y-axis: 780 mm, travel distance Z-axis: 850 mm, table load: 800 kg, spindle speed (max.): 20,000 rpm, TECHNICAL DETAILS Travel Range X-axis: 900 mm Y-axis: 780 mm Z-axis: 850 mm Distance from spindle center to pallet surface: 50 – 950 mm Dsdpfx Abjxyiq Nj Tsla Distance from spindle nose to pallet center: 70 – 850 mm Pallet Pallet size: 500 × 500 mm Indexing angle: 1° Max. workpiece dimensions: 800 × 1,000 mm Max. workpiece weight: 800 kg Spindle Spindle speed: 50 – 20,000 rpm Spindle taper: HSK Rapid traverse & feed rate Rapid traverse (X/Y/Z): 60 m/min Feed rate (X/Y/Z): 1 – 60,000 mm/min Tool system (ATC) Tool holder: HSK Max. tool diameter (adjacent tool): 100 mm Max. tool diameter (no adjacent tool): 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg MACHINE DETAILS Dimensions & Weight Machine height: 3,280 mm Footprint (W × D): 3,080 × 5,585 mm Weight: 21,000 kg Operating Hours Spindle hours: 13,812 h Operating hours: 15,544 h Power-on hours: 33,469 h EQUIPMENT 2-pallet rotary table (APC) Splash guard Coolant supply system Chip air blow (nozzle system) Internal chip conveyor (floor-based system) Spindle head cooling system Worklight (fluorescent) Signal tower (3-stage) Foundation pads Clamping bolts

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 1500050285, travel distance X-axis: 7,800 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 630 mm, spindle speed (max.): 24,000 rpm, number of slots in tool magazine: 14, Submitting a bid obligates the buyer to collect the item on time on 23.12.2025! TECHNICAL DETAILS Travel X-axis: 7,800 mm Travel Y-axis: 1,000 mm Travel Z-axis: 630 mm Rapid traverse X-axis: 70 m/min Rapid traverse Y-axis: 40 m/min Rapid traverse Z-axis: 40 m/min Max. workpiece length: 7,300 mm Max. spindle speed: 24,000 rpm Spindle motor power: 15,000 W Number of spindles: 1 Number of tool magazine slots: 14 Tool diameter: 100 mm MACHINE DETAILS Dsdpfx Aboxx Uf No Tela Input voltage: 400 V Type of input current: Alternating current (AC) EQUIPMENT Documentation/manual included Magazine can be equipped with nine standard tools, five special tools, and one saw blade Ten clamping devices Two separate work areas for pendulum operation 15" color display Floppy disk drive DOS operating system

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 0-341-07-8150, cutting length (max.): 4,300 mm, saw blade diameter: 380 mm, cutting width (max.): 3,800 mm, throat depth: 75 mm, Equipment: scorer, TECHNICAL DETAILS Blade extension: 75 mm Cutting length: 4,300 mm Cutting width: 3,800 mm Main saw blade, max. diameter: 380 mm Main saw blade, power: 9.2 kW Scoring saw blade, max. diameter: 180 mm Scoring saw blade, power: 2.2 kW Pusher carriage speed: up to 80 m/min Saw carriage speed: 1–120 m/min MACHINE DETAILS Numerical control: POWER CONTROL Software: Cad Matic 4.0 Electrical Data Voltage: 400 V Current: 31 A Frequency: 50 Hz Secondary current: 40 A Control voltage: 24 V DC EQUIPMENT Front panel loading Front-side unloading Automatic side aligner Dodpoxx Svrsfx Ab Tjla Fixed front table made of Bakelite with air cushion system 3 mobile front tables made of Bakelite with air cushion system Pusher carriage with 6 clamps

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: M212/0062, turning length: 200 mm, spindle speed (max.): 12,000 rpm, bar diameter (max.): 12 mm, counter spindle speed (max.): 6,000 rpm, Equipment: chip conveyor, In recent years, investments exceeding €25,000 have been made in maintenance and repairs. Occasionally, a system error occurs (sporadically, e.g., after 2–5 days of operation); after powering the machine off and on, it is fully operational again. TECHNICAL DETAILS Max. bar diameter: 12 mm Max. machining length: 200 mm Axes: 7 linear axes + C-axes for main and sub-spindle Main spindle Spindle bore max.: approx. 14 mm Motor power: approx. 2.2 kW Speed range: 200 – 12,000 rpm Indexing: C-axis, full-C (0.001°) Front machining max. drilling diameter: 6 mm Max. thread: M6 Sub-spindle Clamping diameter max.: 12 mm Part length, rear side: 125 mm Max. drilling diameter: 5 mm Max. thread: M5 Speed range: 250 – 6,000 rpm Gang tool holder Max. drilling diameter: 5 mm Max. thread: M4 Max. speed: 200 – 8,000 rpm Turret Max. drilling diameter: 5 mm Max. thread: M5 Max. speed: 200 – 6,500 rpm Back working tools Max. drilling diameter: 5 mm Max. thread: M5 Speed: up to 8,000 rpm Tools Dodjxxlw Njpfx Ab Tela Tool stations: 21 positions Gang slide: 8 positions Turret: 10 positions Back working tools: 3 positions Turning tool shank: 10 × 10 mm Drill bush diameter: 19.05 mm Rapid traverse X/Z/Y: 32 m/min Rapid traverse X2/Y2: approx. 8–16 m/min MACHINE DETAILS Control: Mitsubishi Dimensions & weight Footprint L × W × H: approx. 2.5 m × 1.25 m × 1.7 m Weight: approx. 2,500 kg Power consumption (rated): approx. 6 kVA EQUIPMENT Chip conveyor

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 203214, workpiece weight (max.): 2 kg, spindle speed (max.): 3,700 rpm, workpiece diameter (max.): 150 mm, empty load weight: 1,579 kg, TECHNICAL DETAILS Workpiece diameter: 8 to 150 mm Max. workpiece weight: 2 kg Spindle speed range: 250 to 3,700 rpm Standard speed range: 20 to 1,000 rpm Stroke speed range: 33 to 500 strokes/min Tools Krossgrinding tools: 5.46 to 32 mm TurboHone tools: 3.81 to 32 mm Connecting rod tools: 53.8 to 63.8 mm Larger tools: 25.4 to 101.6 mm MACHINE DETAILS Dedexxkfxjpfx Ab Tsla Coolant system Pump motor power: 0.18 kW Coolant pump: 5.6 l/min Coolant capacity: 132 l Air pressure requirements: 566 l/min at 4.48 bar Recommended air pressure: 5.52 bar Temperature range: 0 to 35 °C Noise emissions: < 71 dB (A) continuous, < 75 dB (A) peak Dimensions & Weight Dimensions (L x W x H): 2,946 x 2,971 x 1,829 mm Net weight: 1,579 kg Required footprint thickness: Minimum 150 mm EQUIPMENT Automatic setup (spindle speed, stroke speed, stroke length, feed rate, spark-out) Automatic finish machining Machine operating modes: Automatic, Manual Series production Single-item production Optional clamping

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 860 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, controller model: Fanuc 0i-MF Plus, spindle speed (max.): 15,000 rpm, Machining center with RoboJob Mill Assist automation, year of manufacture 2025! TECHNICAL DETAILS Travel Range X-axis travel: 860 mm Y-axis travel: 550 mm Z-axis travel: 550 mm Table Table size: 950 x 550 mm Maximum load: 800 kg T-slot width: 18 mm Number of T-slots: 3 T-slot spacing: 150 mm Spindle nose to table surface: 150 - 700 mm Linear Guides & Speeds Linear guides: Ball guideways X/Y, roller guideway Z Rapid traverse X/Y/Z: 40/40/30 m/min Feed rate during milling: 0 - 10,000 mm/min Minimum increment: 0.001 mm Tool Magazine Magazine positions: 30 System: random-access Maximum tool diameter: 75 mm Maximum tool diameter with adjacent slots free: 150 mm (for 40 tools: 130 mm) Maximum tool length: 300 mm Dedpfjxz A Udox Ab Tjla Maximum tool weight: 7 kg Spindle Spindle taper: SK-40 Drive power (30min/continuous): 18.5/11 kW Speed: 15,000 rpm MACHINE DETAILS Controller: Fanuc 0i-MF Plus Dimensions & Weight Machine dimensions (W x D x H): 2,260 x 2,900 x 2,775 mm Required floor space (W x D x H): 3,160 x 3,000 x 3,000 mm Machine weight: approx. 5,400 kg Coolant, Chip, and Compressed Air Management Coolant system: 300-liter tank and pumps Chip evacuation: chip spirals right and left in the machine bed Compressed air connection: at the spindle (M32/M33) Compressed air through the spindle: (M38/M39) Compressed air and coolant gun Electrical and Pneumatic Requirements Electrical connection: 36 kVA Required pneumatic input pressure: 6 bar EQUIPMENT Prepared for fourth axis (FANUC control), incl. wiring and Harting connector (without axis driver) Bed flushing system Integrated coolant pump with 20 bar pressure Belt-type chip conveyor incl. chip trolley RENISHAW OMP-60 probe with infrared transmission RENISHAW NC4+ tool laser measurement system and tool breakage monitoring Auto-door (side door) Pneumatic interface for workpiece clamping RoboJob Mill Assist 25kg, year of manufacture 2025 Full enclosure with double gripper

Condition: ready for operation (used), Year of construction: 2007, operating hours: 64,291 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 35 mm, displacement volume: 154 cm³, injection pressure: 1,595 bar, installation height: 300 mm, TECHNICAL DETAILS Clamping force: 1,200 kN Screw diameter: 35 mm Shot volume: 154 cm³ Injection pressure: 1,595 bar Platen size: 740 mm x 470 mm Minimum mold height: 300 mm Maximum platen distance: 800 mm Opening stroke: 507 mm MACHINE DETAILS Control system: CC100 Dimensions & Weight Machine dimensions (L x W x H): 4.35 m x 2.2 m x 2.1 m Total weight: 7,300 kg Operating hours: 64,291 h EQUIPMENT Screen language German & English CEE socket 16 A Hydraulic core pull 2x Handling unit Conveyor belt Safety enclosure Levelling elements EUROMAP 12 interface Interface for ejector plate monitoring Schuko socket 10 A Dodpfxexzfl Ss Ab Tjla

Condition: excellent (used), Year of construction: 2004, operating hours: 80,859 h, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,630 mm, TECHNICAL DETAILS Dlodox Af Ivjpfx Ab Toa X-axis travel without edge banding: 6,000 mm X-axis travel with edge banding: 5,000 mm Y-axis travel: 1,300 mm Y-axis travel with main spindle + tool diameter 20 mm: 1,630 mm Y-axis travel with edge banding: 1,450 mm Clamping table: Dyna Poin BIMA 410 V Number of positions: 4 Edge banding unit: available Operating hours: 80,859 h

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: AL/008514, workpiece height (max.): 60 mm, table width: 1,000 mm, table length: 3,000 mm, empty load weight: 2,800 kg, TECHNICAL DETAILS Working area: 3,000 x 1,000 mm Max. workpiece height: 60 mm Upper Drilling and Milling Unit Electrospindle / vertical pantograph 24 independent vertical spindles 2 independent horizontal spindles with double output for drilling on the X-axis 2 independent horizontal spindles with double output for drilling on the Y-axis Fixed-position disc cutter group X – 2.2 kW Lower Drilling and Milling Unit Electrospindle / vertical pantograph 24 independent vertical spindles 2 independent horizontal spindles with double output for drilling on the X-axis 2 independent horizontal spindles with double output for drilling on the Y-axis Fixed-position disc cutter group X – 2.2 kW 2 panel gripper clamps Manual loading of parts onto the Flotex table Automatic part unloading Automatic lubrication Safety screens EU regulations MACHINE DETAILS Control: PC and Xilog Plus software Weight: 2,800 kg Electrical Data Rated voltage: 400 V Phases: 3+N Dlodpfx Asxx Sg Dob Tja Rated current: 49 A Frequency: 50 Hz Short-circuit rating: 10 kA

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1212/0058, turning length: 200 mm, spindle speed (max.): 12,000 rpm, bar diameter (max.): 12 mm, counter spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 21, TECHNICAL DETAILS Dedpfsxxlvrjx Ab Tela Maximum bar diameter: 12 mm Maximum machining length: 200 mm Axes: 7 linear axes + C axes for main and sub-spindle Main Spindle Spindle bore: 14 mm Motor power: 2.2 kW Speed range: 200 – 12,000 rpm Indexing: C axis, full-C (0.001°) Front machining maximum drilling diameter: 6 mm Maximum thread: M6 Sub-Spindle Maximum clamping diameter: 12 mm Part length (back side): 125 mm Maximum drilling diameter: 5 mm Maximum thread: M5 Maximum speed range: 250 – 6,000 rpm Gang Tool Holder Maximum drilling diameter: 5 mm Maximum thread: M4 Maximum speed: 200 – 8,000 rpm Turret Maximum drilling diameter: 5 mm Maximum thread: M5 Maximum speed: 200 – 6,500 rpm Maximum thread: M5 Maximum speed: 8,000 rpm Tool Stations Total tool capacity: 21 positions Gang slide: 8 positions Turret: 10 positions Back working tools: 3 positions Tool Holders Turning tool: 10 × 10 mm Drill sleeves: diameter 19.05 mm Rapid traverse X/Z/Y: 32 m/min Rapid traverse X2/Y2: 8 – 16 m/min MACHINE DETAILS Control: Mitsubishi Dimensions & Weight Footprint (L × W × H): 2.5 m × 1.25 m × 1.7 m Weight: 2,500 kg Power Consumption (Rated): 6 kVA EQUIPMENT Chip conveyor

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, cutting length (max.): 4,300 mm, workpiece length (max.): 4,300 mm, workpiece width (max.): 2,200 mm, plate height: 60 mm, Placing a bid obligates the buyer to collect the equipment by calendar week 02 in 2026. Forklifts and transport aids can be provided by the seller. Up for auction is a combination consisting of two Holzma saws, connected to a Bargstedt storage system. TECHNICAL DETAILS HOLZMA PROFILINE HPL 380 Cutting and Lift Table Data Cutting length: 4,300 mm Lift table cutting size: 4,300 mm x 2,200 mm Maximum panel size for lift table loading: 4,300 mm x 2,200 mm Minimum panel size for lift table loading: 1,200 mm x 400 mm Stack Heights Stack height for lift table, floor installation max.: 560 mm Stack height for lift table, pit installation max.: 780 mm Lift table maximum load capacity: 4 t Roller Rails Roller rail element, 10 tracks: 1 piece Roller rail element, 2 tracks: 6 pieces Clamping Jaws Pitch: 75/275/475/1,075/1,825/2,625/3,425 mm Extraction and Air Cushion Tables Push-off device position: 2,375 mm Dsdpfjxy Ng Rsx Ab Tola Air cushion table with rollers 2,160 x 800 mm: 1 piece Air cushion table with rollers 2,160 x 650 mm: 3 pieces Central blower: 1 piece Nozzle duct for air cushion tables: 70 x 70 mm HOLZMA PROFILINE HPP 380 Cutting Data Cutting length: 4,300 mm Cutting width (programmable pusher travel): 4,250 mm Saw blade projection: 95 mm Combi and Clamping System Combi profile rail element, 2 tracks: 9 pieces Clamping jaws: 7 pieces Pitch: 75/275/475/1,050/1,850/2,650/3,450 mm Manual trimming stops on clamping jaws: 4 pieces (positions 75/475/1,050/2,650 mm) Air Cushion Tables and Extraction Air cushion table with roller element 2,160 x 650 mm: 4 pieces Central blower: 1 piece Nozzle duct for air cushion tables: 70 x 70 mm Feed and Programmable Pusher Saw carriage feed forward: 1–130 m/min Saw carriage feed reverse: constant 130 m/min Programmable pusher speed forward: 80 m/min Programmable pusher speed reverse: 80 m/min BARGSTEDT PROFILINE TLF 420 Panel thickness: 3–60 mm Maximum panel size: 4,300 mm x 2,200 mm Maximum traverse length: 5,200 mm Measuring and Correction System Length measurement: integrated Width measurement: integrated Automatic rotation correction: available Note: Further technical details can be found in the attached order confirmations.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 109, briquette diameter: 80 mm, overall weight: 1,450 kg, TECHNICAL DETAILS Briquette type Briquette diameter: 80 mm Motor power: 11 kW Production output: 80 - 210 kg/h Machine performance Cycles per minute: 7 Number of cylinders: 3 Max. discharge length: 70 mm Container Ring diameter: 1,200 mm Container capacity: 1 m³ MACHINE DETAILS Dimensions and Weight Dimensions (L x W x H): 2,100 x 1,350 x 1,600 mm Weight: 1,450 kg Electrical Data Supply voltage: 400 V Frequency: 50 Hz Max. material moisture: 15 % EQUIPMENT Hydraulic oil machine Monoblock clamping system Capacitive sensor for automatic operation Viewing window End-of-cycle system Electronic pressure gauges for pump and clamping pressure Siemens touchscreen PLC Dlsdpfoxyi Ihex Ab Tja Siemens display Operating hours counter Inductive limit switches LED machine position indicator Stamping unit Preheating system Oil level and temperature sensor Preparation for oil cooling in tank and material outlet Power stabilizer Service tools

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, clamping force: 1,300 kN, screw diameter: 55 mm, displacement volume: 510 cm³, injection pressure: 1,650 bar, ejector force: 61,000 N, Injection moulding machine, function-tested and immediately ready for operation by an Engel specialist technician! Inspection with dry run possible at any time. TECHNICAL DETAILS Dodpexzfkbefx Ab Tela Clamping force: 1,300 kN Screw diameter: 55 mm Shot volume: 510 cm³ Injection pressure: 1,650 bar Ejector force: 61,000 N Ejector stroke: 150 mm Platen length: 750 mm Platen width: 750 mm Opening stroke: 600 mm Screw length: 20 l/d Minimum mould installation height: 300 mm Maximum platen distance: 900 mm Daylight: 900 mm MACHINE DETAILS Control system: CC200 Power supply type: Three-phase current Input frequency: 50 Hz Input voltage: 400 V Dimensions & Weight Machine dimensions (L x W x H): 5.8 m x 1.7 m x 2.3 m Total weight: 9,500 kg Operating hours: 24,896 h EQUIPMENT Documentation/manual Display language: German CEE socket 16A Hydraulic core pull 1x Water manifold Levelling elements EUROMAP 67 interface Interface for ejector plate monitoring Schuko socket 10A Mould heating 8x Note: The machine is sold without material hopper and safety guarding.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 0-250-12-2554, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 80 mm, TECHNICAL DETAILS Minimum part dimensions (X, Y, Z): 250 mm x 100 mm x 8 mm Maximum workpiece dimensions (X, Y, Z): 3,000 mm x 1,000 mm x 80 mm Upper vertical working head Dlodpoxx R Slsfx Ab Toa Number of vertical electrospindles: 1 Vertical electrospindle power: 6 kW Grooving saw (90° to the X-Y axis), diameter: 125 mm Number of vertical drill spindles: 32 Vertical drill spindle power: 2.7 kW Number of horizontal drill spindles: 10 (8 in X + 2 in Y) Lower vertical working head Number of vertical electrospindles: 1 Vertical electrospindle power: 6 kW Grooving saw (90° to the X-Y axis), diameter: 125 mm Number of vertical drill spindles: 32 Vertical drill spindle power: 2.7 kW Number of horizontal drill spindles: 10 (8 in X + 2 in Y) MACHINE DETAILS CNC control: PC 85 Software: woodWOP 6 Electrical data Voltage: 380 V Frequency: 60 Hz Phases: 3 Power: 62 kW Current: 125 A Control voltage: 24 V EQUIPMENT Simultaneous processing of two panels Safety enclosure for the working head No. 2 clamps for fixing and moving the workpiece Loading station with air cushion Discharge of panel(s) via motorized roller conveyor Safety system with perimeter fencing and front safety mats

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 1216/0166, spindle speed (max.): 10,000 rpm, bar diameter (max.): 16 mm, counter spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 21, Equipment: chip conveyor, TECHNICAL DETAILS Max. Bar Diameter: 16 mm Axes: 7 linear axes + C-axes for main and sub spindle Main Spindle Spindle bore (main spindle): 18 mm Main spindle motor power: 3.7 kW Main spindle speed range: 10,000 rpm Main spindle indexing: C-axis, Full-C (0.001°) Max. drilling diameter (main spindle): 10 mm Max. thread size (main spindle): M8 / M6 Sub Spindle Max. clamping diameter (sub spindle): 16 mm Workpiece length (sub spindle): 125 mm Max. drilling diameter (sub spindle): 8 mm Max. thread size (back side): M6 Sub spindle speed range: 250 – 6,000 rpm (Full C-axis) Gang Tool Carrier Max. drilling diameter: 4.8 mm Max. thread size: M4 Max. speed: 200 – 8,000 rpm Turret Max. drilling diameter: 4.8 mm Max. thread size: M5 Max. speed: 200 – 6,500 / 8,000 rpm Driven Tools on the Back Side Max. drilling diameter: 5 mm Max. thread size: M5 Max. speed: up to 8,000 rpm Tools Total tool capacity: 21 positions Gang slide: 8 positions Turret: 10 positions Back side tools: 3 positions Turning tool shank: 10 × 10 mm Drill sleeve shank diameter: 19.05 mm Rapid traverse X/Z/Y: 32 m/min Rapid traverse X2/Y2: 8 – 16 m/min MACHINE DETAILS Control: Mitsubishi Dimensions & Weight Footprint (L × W × H): 2.0 m × 1.05 m × 1.7 m Weight: 2,500 – 2,950 kg Power Consumption (Rated): 7.9 kVA Main switch: 40 A EQUIPMENT Chip conveyor Dledpexxlrysfx Ab Tsa Parts conveyor Parts catcher Fire extinguishing system

Condition: ready for operation (used), Year of construction: 2005, operating hours: 64,218 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 520 mm, displacement volume: 392 cm³, injection pressure: 2,000 bar, TECHNICAL DETAILS Clamping force: 2,000 kN Screw diameter: 50 mm Tie bar distance: 520 mm Shot volume: 392 cm³ Injection pressure: 2,000 bar Mould height (h x v): 520 x 520 mm Platen size (h x v): 728 x 728 mm Minimum installation height: 250 mm Maximum platen opening: 900 mm Opening stroke: 650 mm MACHINE DETAILS Control system: Selogica Dimensions & Weight Machine dimensions (L x W x H): 5.45 m x 1.95 m x 2.1 m Total weight: 7,300 kg Operating hours: 64,218 h EQUIPMENT Screen language: German CEE socket 16A Hydraulic core pull 1x Pneumatic core pull 1x Air valve 1x Water battery Levelling elements EUROMAP 12 interface Dsdjxzfh Tspfx Ab Tela Interface for handling Schuko socket 10A Mould heating 12x Note: Machine is sold without material hopper.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: M216/0316, spindle speed (max.): 10,000 rpm, bar diameter (max.): 16 mm, clamping diameter: 16 mm, counter spindle speed (max.): 8,000 rpm, Equipment: chip conveyor, TECHNICAL DETAILS Axes: 7 linear axes + C-axes for main and sub spindle Main Spindle Motor power: 3.7 kW Speed range: 10,000 rpm Indexing: 0.001° full C-axis Max. drilling diameter, frontal machining: 10 mm Max. thread size, frontal machining: M8 / M6 Sub Spindle Max. clamping diameter: 16 mm Workpiece length: 125 mm Max. drilling diameter: 8 mm Max. thread size, rear side: M6 Speed range: 250 – 6,000 rpm Gang Tool Holder (upper) Max. drilling diameter: 4.8 mm Max. thread size: M4 Speed: 200 – 8,000 rpm Turret, driven tools: Max. drilling diameter: 4.8 mm Max. thread size: M5 Speed: 200 – 6,500 / 8,000 rpm Driven Tools, rear side Max. drilling diameter: 5 mm Max. thread size: M5 Max. speed: 8,000 rpm Tools Tool stations: 21 Gang slide: 8 positions Turret: 10 positions Rear side tools: 3 positions Tool Holders Turning tool shank: 10 × 10 mm Drill sleeve diameter: 19.05 mm Rapid Traverse Rapid traverse X/Y/Z: 32 m/min Rapid traverse X2/Y2: 8 – 16 m/min MACHINE DETAILS Control: Mitsubishi Dimensions & Weight Footprint (L × W × H): 2.0 m × 1.05 m × 1.7 m Weight: 2,500 – 2,950 kg Power consumption (nominal): 7.9 kVA Main switch: 40 A EQUIPMENT Chip conveyor Parts conveyor belt Parts catcher Fire extinguishing system Dledpfoxxll Tox Ab Toa

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, clamping force: 1,100 kN, screw diameter: 40 mm, clearance between the columns: 470 mm, displacement volume: 217 cm³, injection pressure: 2,377 bar, The machine has been partially refurbished and is ready for immediate use! The clamping side has been completely refitted with new seals and two almost new tie bars have been installed! TECHNICAL DETAILS Clamping force: 1,100 kN Screw diameter: 40 mm Distance between columns: 470 mm Shot volume: 217 cm³ Ejector force: 22,000 N Ejector stroke: 150 mm Clear opening: 900 mm Injection pressure: 2,377 bar Opening stroke: 600 mm Platen length: 770 mm Platen width: 745 mm Minimum mould height: 300 mm Maximum daylight: 900 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,400 x 1,500 x 2,120 mm Total weight: 6,000 kg Power supply type: Three-phase current Input frequency: 50 Hz Input voltage: 400 V EQUIPMENT Documentation / manual Display language: German Dlsdexzfg Nopfx Ab Tsa CEE socket 16 A CEE socket 32 A Hydraulic core pull 2x Air valve, movable WAP Levelling elements EUROMAP 12 interface Schuko socket 10 A Note: The machine is sold without a material hopper and water battery.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, turning length: 320 mm, spindle speed (max.): 8,000 rpm, turning diameter: 32 mm, spindle bore: 39 mm, controller model: Mitsubishi Meldas, TECHNICAL DETAILS Maximum machining diameter: 32 mm Maximum machining length per clamping: 320 mm Main spindle speed: 8,000 rpm Spindle bore: 39 mm Sub spindle (rear-side spindle): 32 mm Max. frontal milling/drilling: 12 mm Max. frontal thread cutting: M12 Tool capacity: 30 tools Number of axes: 7 MACHINE DETAILS Dsdpfx Abexxlkpj Tjla Control: Mitsubishi Meldas Connected load: 10 kW Dimensions & Weight Dimensions (L x W): 2,800 mm × 1,240 mm Machine weight: 2,800–2,900 kg EQUIPMENT High-pressure coolant system Fire suppression system Chip conveyor Parts catcher Parts conveyor belt 4 driven tool holders Standard tool holders

Condition: ready for operation (used), Year of construction: 2010, operating hours: 54,872 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 55 mm, clearance between the columns: 630 mm, displacement volume: 570 cm³, injection pressure: 2,387 bar, TECHNICAL DETAILS Clamping force: 2,500 kN Injection pressure: 2,387 bar Screw diameter: 55 mm Tie bar spacing: 630 mm Shot volume: 570 cm³ Ejector force: 58,000 N Ejector stroke: 200 mm Opening stroke: 820 mm Mold size H x V: 630 x 630 mm Platen size H x V: 995 x 1,050 mm Minimum mold height: 330 mm Maximum daylight: 1,150 mm MACHINE DETAILS Control system: MC5 Dimensions & Weight Dimensions (L x W x H): 6,500 x 2,200 x 2,300 mm Total weight: 15,000 kg Input frequency: 50 Hz Input voltage: 400 V Operating hours: 54,872 h EQUIPMENT Documentation/manual 2x temperature control units for hot runner Screen text: German Dlodpfx Abjxzd R Ts Toa CEE socket 16A Accumulator for increased injection performance + ejector or core pull parallel operation Hydraulic core pull 1x Air valve 4x Material hopper Water manifold Leveling elements EUROMAP 12 interface EUROMAP 67 interface USB interface Schuko socket 10A Wear-resistant plasticizing unit Note: Machine is sold without handling unit.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 9,585 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 55 mm, clearance between the columns: 520 mm, displacement volume: 523 cm³, injection pressure: 1,904 bar, TECHNICAL DETAILS Clamping force: 1,600 kN Screw diameter: 55 mm Tie bar spacing: 520 mm Injection pressure: 1,904 bar Mold dimensions (h x v): 520 x 470 mm Platen size (h x v): 710 x 660 mm Shot volume: 523 cm³ Ejector force: 33,000 N Ejector stroke: 150 mm Dsdpfx Aoxzd Nvob Tsla Minimum mold height: 200 mm Maximum mold height: 600 mm Opening stroke: 1,050 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,700 x 1,600 x 2,300 mm Total weight: 10,900 kg Power supply type: Three-phase current Operating hours: 9,585 h EQUIPMENT Display language German CEE socket 16 A CEE socket 32 A Accumulator for increased injection performance 3 freely programmable inputs and outputs each Core pull pneumatic 2x Water manifold Levelling elements Interface for dosing unit Interface for temperature control unit USB interface Schuko socket 10 A Low-wear plasticizing unit Tool heating 24x Note: Machine is sold without material hopper.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 49,673 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 35 mm, clearance between the columns: 520 mm, ejector force: 22,000 N, ejector stroke: 100 mm, Function-tested and immediately ready for operation by service for Krauss Maffei injection moulding machines! Inspection with dry run possible at any time. TECHNICAL DETAILS Clamping force: 800 kN Screw diameter: 35 mm Tie bar spacing: 520 mm Shot volume: 154 cm³ Injection pressure: 2,429 bar Djdjxzd Ixjpfx Ab Tsla Ejector force: 22,000 N Ejector stroke: 100 mm Platen length: 740 mm Platen width: 640 mm Mould mounting height: 300 mm Max. platen distance: 790 mm Tie bar dimensions (h x v): 520 x 420 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,350 x 1,700 x 2,000 mm Total weight: 6,500 kg Supply power type: three-phase current Input frequency: 50 Hz Operating hours: 49,673 h EQUIPMENT Documentation/Manual On-screen text in German CEE socket 16A 1x air valve Material hopper Water manifold Levelling elements EUROMAP 67 interface USB interface Schuko socket 10A Tool heating 24x