Used Clamping Shaft Screen for sale (18,174)

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, We are offering for sale a professional, manual screen printing machine, the M&R Chameleon 10-color / 4-station model, manufactured in 2007. Knedjy E Ay Dopfx Ahgjb This is a legendary model, recognized as the most precise and stable carousel in the world. The machine is in very good technical and visual condition and is ready for immediate use in a professional printing shop. Key parameters and advantages: • Configuration: 10 colors / 4 stations (allows for printing very complex designs on a small surface). • Duo-Deck™ system: A unique two-level design that allows for handling 10 colors while maintaining compact dimensions. • Side clamps: Provide extreme screen stability and eliminate vibrations during printing. • Pneumatics (Air Locks): A pneumatic locking system that enables quick setting and replacement of frames without the use of tools. • Micro-adjustment: Precise adjustment in three axes, which maintains parameters even during very long production runs. • Origin: M&R brand – a guarantee of parts availability and service. The machine is ideally suited for high-quality "high-end" printing, creating samples for automated systems, or as a main machine in a boutique printing shop that prioritizes quality. Included is a dryer in very good condition, as well as Newman squeegees in addition to the standard squeegees. These squeegees represent the highest quality of accessories for manual screen printing. Used, functional, and clean profiles. The blades are in good condition. They were used infrequently. The main advantage is that they minimize hand fatigue because they require minimal squeegee pressure and angle adjustment. Furthermore, they do not require sharpening; the blade is replaced. An ideal set for someone opening a printing shop or wanting to replace old squeegees with a professional system.

Condition: good (used), Year of construction: 2007, Screen PT-R16000II, year 2007 Manual plate loading Internal plate cutter Laser head with GLV technology Plate format: 1470 mm x 1165 mm Up to 16 plates/hour in full format 199,000 exposed plates Knodpfxozhm Ars Ahgsb Online L bridge to G & J Quartz III 125 plate developer AGFA ST 125 SX plate stacker Screen EP-B101 network interface Eqious RIP/Workflow All offers are valid subject to prior sale.

Condition: used, Year of construction: 2022, HORIZONTAL PANEL SIZING SAWS GABBIANI P KEY FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLE: AN INDISPENSABLE TOOL LATERAL SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING CLAMPS: THE GUARANTEE FOR A PERFECT CUT TECHNICAL DATA GENERAL SPECIFICATIONS gabbiani p80 Saw blade overhang mm 80 Work table height mm 950 Number of clamps standard 5 Number of clamps maximum for versions 33 9 CUT DIMENSIONS Version 33 (Opt.) mm 3300x3200 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable slider speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (Star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz U/min 4650 Saw blade diameter mm 340 Arbor diameter main saw blade mm 80 SCORING SAW Motor power (S6 -40%) - 50hz kW (HP) 1,5 (2) Speed – 50 hz U/min 5850 Scoring saw diameter mm 200 Arbor diameter scoring saw blade mm 80 INSTALLATION Installed power Kw 12÷15 Base machine voltage Euro Voltage (400 V / 50 hz) Compressed air requirement l/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2190 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: for countries where EC standards apply, the forward feed speed of the slider is limited to 25 m/min. GENERAL FEATURES Automatically controlled horizontal panel sizing saw with PC/PLC control, for cutting panels made of solid wood, MDF, chipboard, plywood and similar materials. Machine frame and work table - Machine frame made as a steel tube construction - Work table made of rib-reinforced steel with Bakelite coating - Longitudinal stop on the left side Saw carriage made of steel, consisting of: - a motor for the main saw blade and a motor for the scoring saw blade - Vertical stroke of the saw blade on linear ball bearing guides and shoes - Running rollers made of hardened and ground steel - Balanced mass distribution to ensure the best cutting quality - Running direction against the longitudinal stop - Saw carriage drive via rack and pinion - Carriage run on cylindrical guides - Cylindrical guides made of hardened and ground steel (5-year guarantee), protected by special dust scrapers - Pneumatic switch for quick and safe changing of the main saw blade and the scoring saw Pressure beam - Pressure beam with uniform pressure on the workpiece over the entire cutting length with recesses to prevent collisions with the clamps; pneumatic height adjustment via high-precision racks and pinions, pressure adjustable from 1.5 to 6 bar - Double extraction system with a unit above the pressure beam to clean the work table and a unit below on the saw carriage - Lateral automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning slider and rear part of the machine - Positioning slider over the entire length with motor drive via a robust shaft. Positioning slider movement on a double T-beam. The drive is via 2 precision pinions, which guarantee constant parallelism between the slider and the cutting line. The slider is controlled by a brushless motor to enable the regulation of the speed according to the requirements for positioning and a quick return - Stepless dru Knodpfx Ahoz Duvpjgjb

Condition: good (used), Year of construction: 2002, machine/vehicle number: 0102002, Semi-automatic angle opening Very good condition 3 months functional guarantee Print format: 1000 mm x 1500 mm max. sheet size: 1050 mm x 1550 mm max. screen frame: 1370 mm x 1850 mm Squeegee pre-squeegee height adjustment: 40 mm Squeegee angle adjustment stepless: + / - 50 - 90 ° Support bar height adjustment: 0 - 100 mm stepless Maximum material thickness: 100 mm Machine weight: approx. 1500 kg connected load: 400Volt/50HZ - 5KW Air connection: 6 bar options: pneumatic screen frame clamping Kedpjrllhkjfx Ahgjnb Squeegee pressure compensation adjustable via pressure regulator Stainless steel pressure plate Blowing air device All data without guarantee

Condition: ready for operation (used), Year of construction: 2010, operating hours: 20,000 h, functionality: fully functional, overall weight: 15,000 kg, rotor diameter: 500 mm, rotational speed (max.): 200 rpm, power: 90 kW (122.37 HP), input voltage: 400 V, type of input current: three-phase, The MeWa Universal Granulator UG 1000 is a high-performance, stationary single-shaft secondary shredder, specifically designed for the fine shredding and recycling of various composite materials and waste. The machine operates according to the principle of a guillotine shear, in which the material is cut between rotating and stationary blades. Drive power: 90 kW Cutting chamber / working width: 1,000 mm Number of blades (rotor / stator): 25/5 blades Rotor diameter (circle of rotation): 500 mm Total weight: approx. 15 tons Screen size: Flexible, interchangeable screens under the rotor determine the final particle size (typically between 10 mm and 80 mm). Kodpfxoz Antus Ahgjnb

Condition: used, Year of construction: 2025, Overview New complete filling and packaging line for beer and carbonated soft drinks in aluminium cans, with an output of 6,000 cans/h at 500 ml and 8,000 cans/h at 330 ml. The line runs from the depalletizer through can rinsing, filling and seaming, tunnel pasteurization, inspection and drying to sleeve labelling, tray shrink wrapping, ABB robot palletizing and pallet stretch wrapping. Two-floor layout: depalletizing on the upper floor, a clamping conveyor lowers the cans to the ground floor for all following machines. All machines are built by Ningbo Cixi except the ABB robot. Technical data - Year of manufacture: 2025 - Capacity: 6,000 cans/h at 500 ml Standard, 8,000 cans/h at 330 ml Standard Knsdpfx Ajz Dv Uyshgsb - Can formats: 330 ml Standard (Ø 66 x 115.2 mm), 500 ml Standard (Ø 66 x 168 mm) - Lid size: 202 for all formats (plug Ø 52.40 mm) - Electrical supply: 380 V / 220 V, 50 Hz - Filler: compressed air and CO2 at 0.4 MPa - Pasteurizer heating: steam at 0.4 MPa, steam boiler not included Scope of Delivery - Depalletizer | XD400 | automatic tier sheet removal and empty pallet stacking, Siemens PLC and touch screen, 10,000 cans/h, 7.8 kW, approx. 8 x 4 x 3.3 m - Can lowering conveyor | JSJ-A | S-type clamping conveyor from the upper to the ground floor, fits both can formats - Can rinser | CX-1 | inline spray rinser, 2 sets of can cages, approx. 4,000 mm total length - Filler-seamer monoblock | AXW20-4Q | 20 filling valves, 4 seaming heads, automatic lubrication, change parts for Ø 66 mm cans, 7.5 kW, approx. 5,000 kg, 3,050 x 2,000 x 2,000 mm - Tunnel pasteurizer | BG-PLG | 8 temperature zones, 4 plate heat exchangers, 25 kW, 16,000 x 2,400 x 1,800 mm including heat exchangers and piping - Fill level inspection | YMXS-180G | inline - Leak inspection | inline internal pressure check - Can inverters | FGJ | 2 units - Air knife dryer | CG-1 | 24,000 cans/h, 7.5 kW fan - Can conveyors | magnetic chain conveyors, approx. 97 m up to the labeller with 13 drives and control cabinet, plus 22 m of belt conveyor from the labeller to the shrink wrapper - Sleeve labeller | SLM-150 | up to 9,000 cans/h, PM-1800 steam shrink tunnel with steam generator, mandrels for both can formats - Tray shrink wrapper | BT25 (TPM-250A) | film-only packs and tray with film, up to 25 packs/min, max. pack size 420 x 280 x 350 mm, approx. 3,000 kg - Robot palletizer | ABB | IRB 460 | 4-axis robot, 110 kg wrist load, 2.4 m reach, vacuum gripper for 6, 12 and 24 packs in both can formats - Pallet magazine | automatic, holds 8 to 10 empty pallets - Pallet conveyors | heavy-duty roller conveyors - Pallet stretch wrapper | automatic inline turntable wrapper, 2,000 mm turntable, loads up to 1,200 x 1,200 x 1,800 mm, 20 to 30 pallets/h, Siemens PLC and touch screen Condition New and unused, packed in export wooden cases. The photos show reference machines of the same models from the manufacturer's documentation. Availability Immediately. Location: Serbia.

Condition: used, Semi-automatic screen printing machine SIRIMAC 4560E Electromechanical machine with parallel lifting upper frame, print area: 45 x 60 cm, vacuum table plate: 60 x 80 cm, screen size: 75 x 100 cm, screen up-and-down motion via geared brake motor, with cross-travel squeegee system, motorized and adjustable squeegee drive, print and flood speed independently adjustable, adjustable squeegee stroke via limit switch, with pneumatic squeegee reversal, pneumatic squeegee and flood squeegee pressure adjustable via manometer, print and flood squeegees with quick-clamp system, adjustable screen lift, with pre-vacuum function, single-stroke or automatic print mode selectable, pre-squeegee function, multiple print, connection: 400V, 50Hz, 10A, compressed air 6 bar required, used condition. Kodpfjw N N Arox Ahgenb

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 2,110 h, functionality: fully functional, machine/vehicle number: 7846, travel distance X-axis: 455 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 800 kg, total height: 2,600 mm, total width: 2,160 mm, total length: 2,600 mm, table width: 400 mm, type of input current: three-phase, distance table to quill: 450 mm, table length: 820 mm, warranty duration: 12 months, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 15 m/min, input voltage: 400 V, overall weight: 2,800 kg, table load: 800 kg, input frequency: 50 Hz, Equipment: documentation/manual, EDM312MF30 + AWEX100/5 100 electrode positions Knjdpfx Aoxlchfehgob 5 pallet positions 320x320mm Operating hours: 2110 h Technical data: Travel paths: 455x300x300mm Workpiece clamping table: 820x400mm Tank dimensions: 900x520mm Filling height: 300mm Distance between table/electrode holder: 150/450mm Max. workpiece weight: 800 kg Maximum dielectric volume: 700 liters Dimensions (W x D x H): 2160x2000x2610mm Machine weight: 2500 kg Power connection: 3/N/PE 400/230V 50Hz Power consumption: 6.7 kVA Equipment: Color: light grey MF30 V3.2 operator interface Touch screen display Exogen generator 60A Direct measuring system on all axes Cartridge filter Integrated cooling unit CO₂ extinguishing system C-axis 100/min with holding brake Handheld control unit with enabling button Lowerable tank, automatic positioning Erowa chuck 12-month warranty Transport On-site commissioning Training

Condition: excellent (used), CATALOG NUMBER 6875 TECHNICAL SPECIFICATIONS - Infeed width: 720 mm - Infeed height: 160 mm - Maximum input material thickness: 160 mm - Shaft width: 720 mm - Shaft diameter: 600 mm - Knife length: 80 mm - Number of knives: 4×12 pcs - Screen size: 25 mm - Infeed pressure feed roller motor: 0.75 kW - Lower toothed feed roller motor: 1.8 kW - Upper toothed feed roller motor: 1.8 kW - Vibrating chute length: 4470 mm - Vibrating chute width: 710 mm - Vibrating chute motor: 2.2 kW - Main motor: 55 kW - Autoreverse (with adjustable control) - Extraction nozzle diameter: 260 mm - Vibrating chute dimensions (L/W/H): 4470/950/930 mm - Machine dimensions (L/W/H): 3100/1500/1170 mm Kodpszrm Uisfx Ahgonb - Total weight: approx. 5500 kg – German manufacture – Very low hours – Original documentation – Used shredder, condition very good / excellent Net price: 139,900 PLN Net price: 33,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the event of significant exchange rate fluctuations, the price may be subject to change)

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, total length: 5,450 mm, total width: 2,700 mm, total height: 2,300 mm, overall weight: 22,500 kg, rotor diameter: 640 mm, rotational speed (max.): 165 rpm, rotor width: 2,000 mm, input voltage: 400 V, year of last overhaul: 2026, Vecoplan VNZ 200 - Two-shaft shredder 2 rotors, each with a length of 2,000 mm Rotor diameter: 640 mm each 48 cutting tips, 80x80 mm, X-Cut per rotor 2 drive motors, each with 132 kW Rotor speed: approx. 165 rpm Control cabinet as a freestanding cabinet Weight: approx. 22.5 t The machine is equipped with a pneumatically pre-tensioned counter-knife crossbar, which can be lowered for maintenance work and to remove foreign objects. In addition, this protects the machine from major damage when foreign objects enter. The large, hydraulically pivoting and locking maintenance doors on both sides further simplify maintenance work and the removal of foreign objects. Possible areas of application: Re-shredding of pre-broken waste or residual wood, as well as pre-shredded household, commercial, or industrial waste, packaging materials, production residues, and much more. Depending on the size, the materials can also be fed into the machine without prior pre-shredding. The machine has been completely overhauled. The following overhauls were carried out: - Rotor bearings renewed - Wear surfaces refurbished - Rotor tool holders re-armored - new hydraulic hoses and new motor for hydraulic unit - Pneumatic piping and valves renewed - Rotors fitted with new cutting tips, and new counter-knives installed - new drive belts - Screens will be newly manufactured according to the required grain size Kedpfx Ahozdf Ruogonb - Complete new paint job - Control cabinet overhauled and new star-delta starter circuit installed Additional spare parts package includes: - two overhauled gearboxes - overhauled drive motor - new turbo coupling

Condition: used, Year of construction: 2010, functionality: fully functional, overall weight: 39,000 kg, rotor length: 3,200 mm, power: 320 kW (435.08 HP), rotational speed (max.): 58 rpm, input voltage: 400 V, Completely Overhauled Machine: Delivery time: November 20, 2026 Slow-speed, robust single-shaft shredder suitable for the pre-shredding of various materials without large contaminants. Application: Shredding of industrial and commercial waste, films, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, mixed plastics for thermal and material recycling, loose or pressed into bales. Lindner Jupiter 3200 Drive power: 2 x 160 kW (ABB) Screen perforation: Screen holes 148 mm Control cabinet: complete with (frequency converter - ABB) Cooling system: included Working opening: 3190 x 1750 mm Filling volume: approx. 8 m3 Rotor length: 3190 mm Rotor diameter: 745 mm Rotor speed: 50Hz: 58 rpm Knedpfxjwkilwo Ahgsb Number of rotor knives: 36 pieces Knife dimensions, cutting knives: 145 x 145 mm Counter knives at the bottom: 9 pieces Stripper comb at the top: 9 pieces Feed system, hydraulic: 11 kW Total weight: approx. 39 t Dimensions L x W x H mm: 6250 x 3260 x 3090 mm Hopper: included Delivery time: November 20, 2026

Condition: new, Year of construction: 2022, functionality: fully functional, The price is for all together. Ideal for a new start on Screen Printing Art studio Artists The set contains: Knodpfexwnw Asx Ahgeb 1.SCREEN PRINTING CAROUSELL type X 4 TABLES, FULL AJUSTABLE 2. DRYIER: 3FACE POWER 3.FLASH AUTO: 3FACE POWER 4. 2 SET OF RACK DRYIERS ALL ARE NEW , OUT OF THEIR BOXES.

Condition: like new (used), Year of construction: 2023, operating hours: 100 h, functionality: fully functional, nominal power: 9 kW (12.24 HP), overall weight: 2,100 kg, type of input current: three-phase, The Crossline 650 automatic cut-off saw is equipped with a rotating table and a 650 mm diameter saw blade that can rotate +/-70°. Material inserted into the machine is automatically detected, and its length is determined. The material is then fed using a push-type clamping device. Cutting accuracy is ensured by two independent upper and side clamping devices. Once the material is firmly clamped, the saw blade rises for cutting. After cutting, the material is pushed onto the output table. The machine can operate in manual mode or automatically, connected to the WinCreator software or with data from other commonly used programs. Crossline 650M The Crossline 650M is equipped with a grooving module. Its use is intended for situations where the production of trusses needs to be combined with cutting material for wall panels, ensuring precise positioning of studs and components in the structure. Thanks to its functionality, the Crossline 650M is an efficient, comprehensive solution and is often an alternative to complex machining centers in the prefabrication of wood-based panels. Groove width max. 60 mm (depending on the tool). Technical data for Crossline 650 and 650M: Industrial PC Beckhoff with 12" touch screen Saw blade Ø 650 mm, 2800 rpm, motor 7.5 kW Blade stroke adjustment Cutting accuracy ± 0.5 mm/meter Feed rate 0-60 m/min Automatic material measurement Cutting diagram for Crossline 650, 650M Knsdpezz A Iwefx Ahgsb

Condition: good (used), functionality: fully functional, Important note: The machine is currently still located at the customer's site – available at the beginning of 2027. Robust WEIMA ZM 30 twin-shaft shredder for shredding wood waste, offcuts, and similar materials. Knodpozxrxgsfx Ahgeb The machine features two slow-running shredding shafts and a generously sized feed hopper. Due to its low speed and robust design, the machine is well-suited for use in carpentry workshops, joineries, and wood processing companies. Technical data Manufacturer: WEIMA Maschinenbau GmbH Type: ZM 30 Year of manufacture: 10/2002 Machine no.: 900-789 Motor power: 2 × 11 kW Total motor power: 22 kW Voltage: 400 V Frequency: 50 Hz Current consumption: 55 A Speed: 25 rpm Cutting width: approx. 460 mm Screen hole size: Ø 20 mm Hopper opening: approx. 600 × 1,240 mm Dimensions: approx. 1,490 × 1,290 × 1,970 mm Weight: approx. 1,300 kg Operating hours: approx. 4,188 hours according to the operating hour meter Equipment Twin-shaft cutting system 2 separate drive motors, each with 11 kW Large feed hopper Screen with Ø 20 mm holes Emergency stop Control cabinet / electrical control The machine can be inspected and tested under power by appointment. Transport is possible for an extra charge! Note The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty will be excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale, and changes are subject to change. All information is without guarantee.

Condition: excellent (used), Year of construction: 2020, operating hours: 8,344 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, displacement volume: 392 cm³, total length: 4,110 mm, total width: 2,650 mm, total height: 4,810 mm, overall weight: 22,000 kg, Equipment: documentation/manual, ARBURG Allrounder 2000 T 2000-800 Stock No.: 503618 Manufacturer: ARBURG Type: Allrounder 2000 T 2000-800 Control: Selogica direct Year of manufacture: 2020 Knodpsz A Tb Uefx Ahgjb Operating hours: 8344 h Technical data, clamping unit Clamping force: 2000 kN Platen size h x v: 1772 x 800 mm Minimum mold height: 400 mm Maximum mold opening: 900 mm Opening stroke: 500 mm Platen diameter: 2000 mm Ejector stroke: 175 mm Ejector force: 45 kN Mold weight: 6000 kg Technical data, injection unit Screw diameter: 50 mm Injection volume: 392 ccm Injection pressure: 2000 bar Screw length: 20 l/d Screw stroke: 200 mm Screw speed: 60 min Screw torque: 880 N Number of heating zones: 8 Nozzle stroke: 400 mm Dimensions & weight Machine dimensions L x W x H: 4.11 m x 2.65 m x 4.81 m Total weight: 22000 kg Equipment Screen text, German Screen text, English CEE socket 16A Hydraulic core pull, 4x Air valve 1x Machine with rotary platen Machine with water manifold Machine without material hopper Leveling elements EUROMAP 67 handling interface EUROMAP 73 interface OPC interface

Condition: good (used), Year of construction: 1998, Motor power [kW]: 150 (2x75) Number of blades on the shaft: 48 (2x24) Blades [mm]: 80x80x45 mm (reinforced/extended mounting threads). New, square. 4 blades, of which 3 blades are 100% and 1 blade is approximately 70% new Rotor: Shaft width [mm]: 2,100 Number of shafts: 2 Shaft diameter: 500 mm Shaft speed [rpm]: 75-165 Screen diameter [mm]: 30 mm Chamber dimensions [mm]: 2,100 x 1,250 Automatic start: Soft start Rated voltage: 3 x 400 V/50 Hz Rated current: 160 A-200 A Automation: Siemens Simatic Weight [kg]: approx. 14,500 Dimensions: Length [mm]: 3,850 Width [mm]: 2,720 Height [mm]: 2,700 Documentation: German 2014 A complete overhaul was carried out. A list of these parts and pictures are available upon request. This machine has not been used for several years (since then - one owner). Previously, it processed plastic, film, and cardboard - RDF after selective recycling. The approximate throughput for materials like the above (lightweight) is about 1-1.5 tons/hour. Other materials - to be checked/discussed. The machine was fully functional and is currently stored on site. Kedpfxsibzbhj Ahgonb Additional photos and video available upon request.

Condition: excellent (used), Year of construction: 2015, operating hours: 14,900 h, functionality: fully functional, overall weight: 33,000 kg, power: 264 kW (358.94 HP), rotational speed (min.): 70 rpm, input voltage: 400 V, Slow-running, robust single-shaft shredder suitable for pre-shredding a wide variety of materials without solid contaminants. Application: Shredding of industrial and commercial waste, foils, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, and mixed plastics for thermal and recycling purposes, loose or baled. Lindner Jupiter 2200 Drive power: 2 x 132 kW (ABB motors) Screen perforation: According to customer requirements. mm Control cabinet: complete with (FU-ABB) Working opening: 2135 x 1750 mm Filling volume: approx. 5.5 m3 Rotor length: 2200 mm Rotor flight circle: 745 mm Rotor speed: 50 Hz: 87 rpm Number of rotor blades: 84 Blade shape: 172 x 57 x 28 mm Lower anvil blades: 6 Upper scraper combs: 6 Hydraulic feed: 11 kW Kjdpfev S Hyvjx Ahgonb Total weight: approx. 33 t Dimensions LxWxH mm: 5500 x 3050 x 3100 mm, with hopper H = 4880 mm Delivery time: immediately Two discharge belts available as an option.

Condition: excellent (used), Year of construction: 2019, operating hours: 8,250 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, displacement volume: 392 cm³, total length: 4,110 mm, total width: 2,650 mm, total height: 4,810 mm, overall weight: 22,000 kg, Equipment: documentation/manual, ARBURG Allrounder 2000 T 2000-800 Stock No.: 503617 Manufacturer: ARBURG Type: Allrounder 2000 T 2000-800 Control: Selogica direct Year of Manufacture: 2019 Operating Hours: 8250 h Technical Data, Clamping Unit Clamping Force: 2000 kN Platen Size H x V: 1772 x 800 mm Minimum Mold Height: 400 mm Kodpoz A Tdpefx Ahgsnb Maximum Platen Distance: 900 mm Opening Stroke: 500 mm Rotary Table Diameter: 2000 mm Ejector Stroke: 175 mm Ejector Force: 45 kN Mold Weight: 6000 kg Technical Data, Injection Unit Screw Diameter: 50 mm Injection Volume: 392 ccm Injection Pressure: 2000 bar Screw Length: 20 l/d Screw Stroke: 200 mm Screw Speed: 60 rpm Screw Torque: 880 N Number of Heating Zones: 8 Nozzle Distance: 400 mm Dimensions & Weight Machine Dimensions L x W x H: 4.11m x 2.65m x 4.81m Total Weight: 22000KG Equipment Screen text in German Screen text in English CEE socket 16A Hydraulic core pull, 4x Air valve 1x Machine with rotary table Machine with water manifold Machine without material hopper Leveling elements EUROMAP 67 handling interface EUROMAP 73 interface OPC interface

Condition: good (used), Year of construction: 2013, operating hours: 36,163 h, functionality: fully functional, displacement volume: 59 cm³, total length: 3,000 mm, total width: 1,600 mm, total height: 3,480 mm, overall weight: 3,540 kg, Equipment: documentation/manual, ARBURG Allrounder 375 V 500-170 Stock No.: 503615 Manufacturer: ARBURG Type: Allrounder 375 V 500-170 Control: Selogica-direkt Year of manufacture: 2013 Operating hours: 36163 h Technical data, clamping unit Clamping force: 500 kN Minimum mold height: 200 mm Maximum mold height: 550 mm Maximum mold opening distance: 302 mm Opening stroke: 225 mm Platen size (diameter): 900 mm Ejector force: 70 kN Centering of moving platen (diameter): 125 mm Mold weight: 230 kg Technical data, injection unit Screw diameter: 25 mm Injection volume: 59 ccm Injection pressure: 2500 bar Screw length: 24 l/d Screw speed: 35 rpm Screw torque: 210 N Number of heating zones: 5 Dimensions & Weight Machine dimensions (L x W x H): 3m x 1.6m x 3.48m Total weight: 3540 kg Equipment Screen text in German Rotary table Hydraulic core pull (1x) Machine with water manifold Machine without material hopper Leveling elements EUROMAP 67 handling interface Kodpfoz Ayhqjx Ahgjnb EUROMAP 73 interface Interface for ejector plate locking

Year of construction: 2026, condition: new, functionality: fully functional, The combination of FTJ-1175 jaw track crusher and FTB-1550 scalper screen are stone crushing and screening systems, which are often used in quarries, mines and construction sites. This type of equipment is designed for crushing and screening of hard rocks. Here are the general features of these two FABO equipments combined and serve as a single line FTJ-1175 Tracked Jaw Crusher: - Capacity: Ideal for crushing hard rocks and stones with high capacity. - Mobility: Thanks to its crawler structure, it moves easily in difficult terrains. - Jaw Opening: Thanks to its wide jaw opening, it easily crushes large-sized materials. - Efficiency: It offers long-lasting use with its energy-saving engine and durable construction materials. FTB-1550 Tracked Scalper Screen - Screening Capacity: Suitable for pre-screening of large volume and coarse materials. - Dimensions: Features a 1550 mm wide screen system, allowing for larger material capacity. - Durability: With its wear-resistant construction, it can be used in heavy-duty operations. - VariousScreening Options: Different sizes of screens allow separation of various material sizes. Advantages of the Combination: 1. High Performance: Crushing and screening of the material is done quickly in the same system. 2. Mobility: The crawler structure provides portability and offers the possibility of use at different sites 3. Operational Ease: Integrated operation on a single line saves labour and time. Kodpfxjzx U Rlj Ahgenb 4. Various Applications: Suitable for quarries, recycling plants and large-scale construction projects. With impressive crushing capacity, reduced operating costs, and simple maintenance, this combination is a reliable, high-performing solution for any project FABO’s innovative technology guarantees exceptional efficiency and performance, giving your projects a strong competitive edge.

Condition: excellent (used), Year of construction: 2024, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 4803, type of input current: AC, overall weight: 2,200 kg, total width: 2,600 mm, total length: 2,600 mm, total height: 2,300 mm, input voltage: 400 V, power: 5.5 kW (7.48 HP), input frequency: 50 Hz, A nearly new GKM KTS 2600 DS with less than 500 operating hours. This is a tumbling screen machine with a patented adjustment for the three-dimensional movement, allowing the dwell time for each product on the screens to be individually adjusted. The main shaft is driven by an electric motor and V-belt. Technical data: Knedpfx Ahjzl U Uwsgob • Tumbling screen machine with a 2600 mm diameter and 5 screen decks • Inlet DN 300, outlet DN 300, stainless steel • Screen lifter for easy removal • Approximately 4000 silicon balls for screen cleaning for difficult materials • Motor 5.5 kW, 400 VAC, 50 Hz • ATEX EXII-/3D Ex h IIIB T155°C design – Zone 20 inside, Zone 22 outside • Outlets are individually adjustable and adaptable • Installed screen sizes: 2 mm, 1 mm, 0.56 mm, 0.4 mm, 0.32 mm • Spare screens: 0.63 mm, 0.71 mm, 1.5 mm The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner’s expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is without packaging on a pallet.

Condition: used, Year of construction: 1997, machine/vehicle number: 10638, functionality: limited functionality, operating hours: 49,125 h, power: 37 kW (50.31 HP), input voltage: 380 V, input frequency: 50 Hz, pressing force: 80 t, stroke length: 63 mm, table width: 900 mm, table length: 1,200 mm, Pressing force: 80 t Adjustable ram stroke: 16 - 63 mm (Currently fixed at 63 mm; stroke adjustment is not possible because the shift shaft for stroke adjustment is bent.) Ram adjustment: 76 mm Ksdpfx Aezp U Avohgonb Table clamping surface approx.: 1200 x 900 mm Number of strokes per minute: 50 - 600 min-1 Power requirement: 37 kW

Condition: excellent (used), Year of construction: 2013, operating hours: 30,533 h, functionality: fully functional, clamping force: 900 kN, screw diameter: 30 mm, displacement volume: 106 cm³, plate length: 630 mm, plate height: 580 mm, total length: 4,000 mm, total width: 1,500 mm, total height: 2,200 mm, overall weight: 4,100 kg, Equipment: documentation/manual, BATTENFELD HM 90-210 Stock No.: 503672 Manufacturer: Wittmann Battenfeld Type: HM 90-210 Control System: UNILOG B6 Year of Manufacture: 2013 Operating Hours: 30533 h Technical Data - Clamping Unit Clamping Force: 900 kN Tie Bar Distance h x v: 420 x 370 mm Platen Size h x v: 580 x 630 mm Minimum Mold Height: 450 mm Maximum Mold Height: 925 mm Opening Stroke: 475 mm Ejector Stroke: 150 mm Ejector Force: 41 kN Centering of Moving Platen D: 125 mm Centering of Fixed Platen D: 125 mm Mold Weight: 800 kg Technical Data - Injection Unit Screw Diameter: 30 mm Injection Volume: 106 ccm Injection Pressure: 2042 bar Screw Length: 22 l/d Screw Stroke: 150 mm Screw Speed: 372 rpm Screw Torque: 490 N Free Injection Rate: 103 g/s PS Number of Heating Zones: 4 Nozzle Distance: 250 mm Dimensions & Weight Machine Dimensions L x W x H: 4m x 1.5m x 2.2m Total Weight: 4100KG Equipment Screen text in German CEE socket 16A CEE socket 32A Hydraulic core pull, 2x Air valve, 1x Leveling elements Plasticizing unit, highly wear-resistant and corrosion-resistant Screw drive with three-phase servomotor Ethernet interface EUROMAP 13 interface EUROMAP 67 Handling interface Interface for color dosing unit Interface for temperature control unit Kjdpfez A A Hyox Ahgsnb Schuko socket 10A Mold heating, 8x

Condition: good (used), Year of construction: 2005, operating hours: 59,000 h, functionality: fully functional, clamping force: 4,200 kN, screw diameter: 60 mm, clearance between the columns: 800 mm, displacement volume: 769 cm³, plate length: 1,200 mm, plate height: 1,270 mm, total length: 6,830 mm, total width: 2,330 mm, total height: 2,480 mm, overall weight: 23,090 kg, Equipment: documentation/manual, KRAUSS MAFFEI KM 420-1900 C2 Kedpfxoz Dgcbe Ahgsnb Stock No.: 503535 Manufacturer: KRAUSS MAFFEI Type: KM 420-1900 C2 Control: MC 4 Year of manufacture: 2005 Operating hours: 59,000 h Technical data, clamping unit side Clamping force: 4200 kN Tie bar distance h x v: 800 x 800 mm Platen size h x v: 1270 x 1200 mm Minimum mold height: 580 mm Maximum mold thickness: 1300 mm Opening stroke: 720 mm Ejector stroke: 250 mm Ejector force: 95 kN Centering of moving platen D: 200 mm Centering of fixed platen D: 200 mm Tool weight: 6700 kg Technical data, injection side Screw diameter: 60 mm Injection volume: 769 cc Injection pressure: 2200 bar Screw length: 23 l/d Screw speed: 285 min Plasticizing rate: 70 g/s PS Free injection rate: 700 g/s PS Number of heating zones: 6 Dimensions & Weight Machine dimensions L x W x H: 6.83 m x 2.33 m x 2.48 m Total weight: 23090 kg Equipment Screen text in German Hydraulic core pull, 4x Machine without handling system Machine without material hopper Leveling elements Tool heating, 12x

Condition: good (used), Year of construction: 2004, functionality: fully functional, Equipment gathering machine • 6 stations • gatherer Ferag • reject unit • 2 jogging elements perfect binder • perfect binder Publica KM 410 • copilot with touch screen • 40 clamps • infeed incl. coupling with ZU • 2 milling stations • strip milling head • 4 spine preparation stations Knedpsrf U Iiefx Ahgjb • hotmelt spine gluing unit • 2nd hotmelt spine gluing unit • hotmelt side gluing unit • 3 premelters • stream cover feeder SAL 411 • cover scoring 4 lines • 2 pressing stations • straight delivery • lay down device • quality control with individual product rejection conveyor system • length ca. 50 m • drying tower XAF • intermediate delivery • belt control cabinet TS.E three knife trimmer • three knife trimmer HD 152.P • right hand infeed with pre stacker • copilot with touch screen • cutting tables • knife adjustment device • 2 sets of knives compensating stacker • compensating stacker CB 16 • counting device • delivery right