Used Clamping Device for sale (19,497)

Condition: excellent (used), Year of construction: 2004, T-slot clamping plate with frame MÜHLENBAUER Type: ASP 2240 Year 2004 Dcedpfeq H Ectjx Ac Njc in very good condition . Plate : 2240 mm X 2240 mm X 80 mm Frame : 2000 mm X 2000 mm Total height : 320 mm T-slots for M24 T-slot nut Weight : 2300 KG

Condition: like new (used), Year of construction: 2010, Casting clamping angle Fabr.SAV Typ:AW71863 Bj.ca.2010 Dcedpfxohcimwj Ac Noc As good as new with 315mm Röhm chuck bore 100 mm Width : 500mm Depth : 310 mm Height without base plate: 550 mm Height with base plate: 585 mm Base plate : 500 mm X 400mm Center height : Chuck : 325 mm is hardly used Very good condition with chuck key .

Condition: good (used), Year of construction: 1990, Clamping angle Fabr.AMF Type:1430 Year 1990 Clamping surface : L 1430 X H1130 XT1150 mm Djdpfeu Hgrxox Ac Necc T-slot 24X40X40 mm in good condition .

Year of construction: 2005, condition: good (used), Wooden power chuck Fabr.FORKARDT Type:3QLC/K250-72-Z8-S12-172005 Djdpogqxg Hjfx Ac Njcc Bore in chuck 72mm with clamping cylinder complete Year 2005 in good condition.

Year of construction: 1997, condition: excellent (used), Hydraulic system - clamping hydraulics Dedomx Slzjpfx Ac Necc For tool clamping - Clamping device Make:BACHOFEN HYDRAULIK Type:HA3B-L1/90 Year.15/1997 Tank : 3 L Clamping pressure :90 Bar In very good condition .

Condition: used, Year of construction: 2006, Kahl Twin Screw Extruder is a machine manufactured by Kahl in 2006. Currently stored in Germany, it comes equipped with a fine grain hopper, fine grain discharge, fine grain sack, a belt unit (Type: BTK 1510-0), water addition, extruder, supply air blower, reconditioned in 2016. It also includes dust removal, tumbler sieve, dedusting, final packaging, belt dryer, product hopper, pipe chain conveyor, cyclone, rotary valve, distributor, dust sack, exhaust air blower, air stream rotation dryer, feed table, mixer, and an additional air supply blower and belt dryer. The delivery terms are FCA. Equipment: 1 x feed table, 1 x tube chain conveyor, 1 x mixer 1 x water addition, 1 x extruder, 1 x supply air fan, 1 x cyclone, 1 x rotary valve, 1 x distributor, 1 x belt dryer, 1 x product hopper, 1 x tube chain conveyor, 1 x fine grain hopper, 1 x fine grain discharge, 1 x fine grain bag, 1 x supply air fan, 1 x belt dryer, 1 x rotary valve, 1 x dust bag, 1 x exhaust fan, 1 x airflow rotary dryer, Dcedpfovfxqyjx Ac Nec 1 x dedusting, 1 x tumbling screen, 1 x bar removal, 1 x final packaging 1 x belt unit, type: BTK 1510-0 refurbished 2016

Condition: good (used), Remote-controlled quick clamping cars fully hydraulic with hydraulic Help car. Track width 840 mm. Control Panel and electric control cabinet. Dcedpfx Aed Nqrqec Nsc

Condition: repair required (used), Sturdy Linck fully hydraulic clamping trolley type VA with hydraulic auxiliary carriage VY. Track gauge 1,100 mm. The tensioning wagon set was overhauled approx. 18 years ago and not been in use since then. Also ideal for spare parts. Dcodpfovfdp Ijx Ac Nec

Condition: good (used), Sturdy block clamping carriage for horizontal fence or band saw Length approx. 9.0 m. Track width 920 mm. 6 clamping blocks. With hydraulic feed. Also suitable for feeding drying kilns etc. Dsdstqd Naopfx Ac Njcc

Condition: used, functionality: fully functional, Year of construction: 2020, load capacity: 3,800 kg, empty load weight: 1,123 kg, opening width: 1,525 mm, Roll clamp Load center: 760 mm ISO Class: ISO Class 3 = 2,500 - 4,999 kg Dcjdpfx Aceydf Rus Njc Condition: Operational and fully functional Technical Condition: Very good Description: In addition to this device, we offer a wide range of forklifts and warehouse equipment. All our units are inspected and certified in accordance with FEM4.004 standards. Please contact us by email or phone. You can also find us at hsr-gabelstapler. We are also interested in purchasing your used equipment, even if you do not buy a machine from us. Lease-purchase and financing options are available upon request at attractive terms. We are happy to provide you with knowledgeable and comprehensive advice on our vehicles.

Condition: used, diameter - cutter standard 270 - 400 mm spindle turning speed range 18 - 1280 U/min Dcodpsydfnysfx Ac Nec total power requirement 5 kW module 0,5 - 9 dimensions 2,30 x 2,0 x 1,4 m weight of the machine ca. 1,7 t including change gears.

Condition: excellent (used), Year of construction: 2013, liter capacity 300 l feed pressure 18,5 bar coolant capacity 2800 l Dsdpfx Aexxmm Sjc Nocc Filter capacity 1,5 m² total power requirement 45 kW weight of the machine ca. 3,1 t dimensions of the machine ca. 4,3 x 2,6 x 2,2 m

Condition: excellent (used), Year of construction: 2020, liter capacity 240/300 l feed pressure siehe Plan bar coolant capacity 2900 l Filter capacity 6 m² total power requirement 45 kW weight of the machine ca. 3,1 t dimensions of the machine ca. 4,3 x 2,6 x 2,2 m Dcodpfx Acswgizwe Nsc

Condition: excellent (used), Device for precise setting, measurement, and inspection of CNC cutting tools. Equipped with an EZset optical camera system and EZvision (Image Controller 1) software. Condition: very good, complete, ready for operation. Technical data and features: • Model: PRECIsset 400 • Measurement system manufacturer: EZset GmbH & Co. KG, Germany • Control screen: Image Controller 1 • Software: EZvision • Documentation version: 1.1.1 (18.08.2006) • Measuring range X / Z axes: up to 400 mm • Camera with image processing system • Edge, length, and tool diameter measurement function • Results can be saved and printed Dcodpfxoxn Awxe Ac Nsc • USB and RS ports • Power supply: 12 V DC, 40 VA • Year of manufacture: approx. 2018–2019 • Supplied with original PRECITOOL technical documentation Condition: • Used, fully functional • Screen operates correctly • Longitudinal/Transverse axes reference correctly • Well-maintained unit from a German tool shop Functional description: The PRECIsset 400 enables fast and repeatable tool setup prior to CNC machining. The EZset vision system allows for blade geometry analysis and tool wear inspection. High measurement accuracy ensured by a stable column and industrial-grade optics.

Condition: new, Year of construction: 2025, functionality: fully functional, load capacity: 500 kg, Column lift turning device 500 kg load capacity Positioner Sideros Syncrolift Double column Radio remote control (wireless) Year of manufacture 2024 Load capacity 500 kg Minimum working height: 1000 mm Maximum working height 1500 mm Speed 1 rpm Vertical adjustment 500 mm Clamping plate diameter 500 mm Dcsdpfx Acouk Niae Nsc Rotation 0.4 kW Lifting motor 2 x 0.6 kW Various column lift turning devices are available: 500 kg, 1000 kg, 2000 kg, 3000 kg, 5000 kg, 10000 kg, 20000 kg Request a quote

Condition: new, Year of construction: 2025, functionality: fully functional, load capacity: 30,000 kg, Equipment: foot remote control, 30 tons lifting capacity, self-centering, new 380V Hand and foot remote control Rotational speed 100 - 1000 mm/min. Diameter range 600-4500mm Drive wheel diameter 350mm x width 180 Material heat-resistant PU, non-slip Dimensions: 2350 x1460 x 1050 Double drive synchronous Dcjdpfxowrpfge Ac Noc

Condition: new, load capacity: 10,000 kg, Column lifting and rotating device with 10-ton load capacity, available as a set or individually. Driven on both sides. The machine is offered as a synchronized set or as individual units. Protec turning/positioning device Syncrolift. Double column, wireless and manual hand remote control. Column adjustment electrically drivable in both directions. Load capacity 10,000 kg, 360° rotation. Dsdjwtq Dtopfx Ac Necc Minimum working height: 800 mm. Maximum working height: 1,700 mm. Speed: 0.5 rpm. Clamping plate diameter: 900 mm. Rotational drive: 2 x 2.2 kW. Torque: 18,950 Nm. The machine is also available as a mono model (more economical). Optional with articulated flange (cardan flange).

Condition: new, Year of construction: 2025, load capacity: 10,000 kg, Column lift turning device, 10-ton load capacity, available as a set or individually 2 sides powered Machine offered as a synchronized set or individually Protec turning device / positioner Syncrolift Double column, wireless and manual hand remote control Column adjustment electrically driven on both sides Dcedpfxjwtxxro Ac Noc Load capacity 10,000 kg, 360° rotation Minimum working height: 800 mm Maximum working height: 1700 mm Speed: 0.5 rpm Clamping plate diameter: 900 mm Rotating drive: 2 x 2.2 kW Torque: 18,950 Nm Machine is also available individually as Mono model (more affordable) Optional with articulated flange (Cardan flange)

Condition: like new (used), Year of construction: 2024, load capacity: 10,000 kg, Special price, used for 1/2 year, as new, with warranty Self-centering complete set, dual drive, synchronous with hand remote control, digital display, and foot control Diameter from 300 mm to 3500 mm Djdpfxsw D Rhaj Ac Necc Drive roller diameter 300 mm Dimensions: length: 1900 mm x width: 470 mm x height: 390 mm Continuously adjustable speed 200 – 1200 mm/min. Motor AC 380 V

Condition: new, Year of construction: 2025, load capacity: 500 kg, 3-axis rotary and turning positioner 500, 1000, 2000, 3000 kg load capacity, clamping disk diameter 0.5 0.65, 0.8 1.0 meter have proven themselves in the field of construction and agricultural machinery, commercial vehicles, industrial trucks as well as in the aviation and energy technology sectors. For welding, assembly, machining, etc. With their stable and robust design, flexible positioning over three axes, even overhead, and easy operation, they make welding easier. easy to operate, they facilitate the welding, assembly and handling of large workpieces. workpieces. Faster production, increased productivity Optimum positioning of the workpiece improves the welding quality and enables a higher deposition rate Improved safety, dangerous crane handling is greatly reduced Simultaneous positioning of up to three axes without time-consuming reclamping Dcjdjulaxbjpfx Ac Njc Simple operation and ergonomics during processing protect and relieve the operator Flexibility thanks to modular adaptability and customer-specific special designs possible The basic principle: By positioning the support arm rotary axis above the clamping plate, the support arm acts as a counterweight to the workpiece. counterweight to the workpiece. The machines are therefore considerably more powerful than turn-tilt tables or turn-tilt positioners. This principle makes it possible to handle the specified specified loads in any position. Due to the endless rotation of the 2 axes and the additional height adjustment, all workpiece positions (even overhead) are possible. possible. Speed of turntable infinitely variable 0.1 to 1.0 rpm, from 2000 kg load capacity 0.05 to 0.6 rpm. with radio remote control Rotation range 360° endless Swivel range 360° endless Stroke: 1000 - 1500mm, from 2 tons load capacity 1250 - 2000mm Arm radius up to 1000 kg 1 meter, from 2000 kg 1.5 meters

Condition: new, Year of construction: 2025, load capacity: 10,000 kg, self-centering complete set, double drive, synchronous with hand-held remote control with digital display and foot remote control Diameter from 300mm to 3500mm Drive rollers diameter 300mm x 120mm Dcsdsv En D Nepfx Ac Njc Dimensions: length: 1900mm x width 470mm x height 390mm Speed continuously variable 100 - 1200 mm / min. Motor AC 380 V Load capacity 10 t Total power requirement 1.1 kW Self-aligning for several diameters Continuously adjustable speed of the drive unit Polyurethane coating of the rollers heat-resistant Optimal load distribution (4 rollers/unit), particularly gentle for workpieces with low wall thickness and sensitive surfaces Remote control on the cable and double foot pedal CE certificate

Condition: new, Year of construction: 2025, functionality: fully functional, load capacity: 2,000 kg, Column lift and rotation device, 2000 kg load capacity, with adjustable height Sideros Syncrolift positioner Dcjdpeuk Nigjfx Ac Nsc Double column Radio handheld remote control (wireless) Year of manufacture: 2024 Load capacity: 2000 kg Minimum working height: 1000 mm Maximum working height: 1500 mm Speed: 1 rpm Vertical adjustment: 500 mm Clamping plate diameter: 700 mm Rotational power: 1.1 kW Lifting motor: 2 x 1.1 kW Various column lift and rotation devices available: 500 kg, 1000 kg, 2000 kg, 3000 kg, 5000 kg, 10000 kg, 20000 kg Request a quote

Condition: like new (used), Year of construction: 2024, Special price, used for 1/2 year, as new, with warranty Self-centering complete set, dual drive, synchronous with hand remote control, digital display, and foot control Diameter from 300 mm to 3500 mm Drive roller diameter 300 mm Dimensions: length: 1900 mm x width: 470 mm x height: 390 mm Continuously adjustable speed 200 – 1200 mm/min. Motor AC 380 V Djdpfx Aewt A Nzec Njcc

Condition: new, Year of construction: 2025, functionality: fully functional, load capacity: 30,000 kg, Container turning device, 30-ton capacity, 400 V, 32 A Dual drive motor, synchronously controlled Dcedswinxaopfx Ac Noc For container diameters from 570 mm to 4500 mm Continuous speed control via remote control, right/left rotation Forklift mounting Roller diameter 350 mm x 180 mm PU Speed 100 - 1000 mm/min. Drive motor 2 x 1.1 kW Dimensions approx. 2750 mm x 500 mm Total weight 1200 kg Dual drive, synchronously controlled New machine, special price Total weight 1.9 tons

Condition: new, load capacity: 1,000 kg, Column lift turning device 1000 kg load capacity, mobile with 2 pallet trucks Positioner Sideros Syncrolift Double column Radio remote control (wireless) Year of manufacture: 2024 Load capacity: 1000 kg Minimum working height: 600 mm Maximum working height: 1500 mm Speed: 1 rpm (adjustable at extra cost) Vertical adjustment: 900 mm Clamping plate diameter: 500 mm Rotary drive: 0.4 kW Lifting motor: 2 x 0.4 kW Various column lift turning devices available: 500 kg, 1000 kg, 2000 kg, 3000 kg, 5000 kg, 10000 kg, 20000 kg Request a quote Dsdpfxewulnpj Ac Njcc