Used Clamping Device for sale (18,488)

Condition: used, centre height 160 mm Chodpfezcgb Sox Afgjc chucking diameter 200 mm hollow 54 mm

Condition: used, / weight 75 kg Center height: approx. 215mm dimension Length: about 370mm Width: about 260mm Height: approx. 340mm Chuck diameter: 190mm Lining passage: 60mm Chjdpszcq Hxsfx Afgsc Weight: 75kg NEIGHBOR

Condition: used, length 1000 mm width 500 mm Chodpfx Afsyr Smrogoc height 150 mm

Condition: used, length 1000 mm width 500 mm height 150 mm Chjdpeyr Smxsfx Afgsc

Condition: used, table length 630 mm table width 500 mm table load / t Chedpoyt R R Sjfx Afgoc

Condition: used, Year of construction: 2021, functionality: fully functional, overall weight: 20 kg, total width: 1,160 mm, total length: 1,160 mm, For sale is a high-quality Motan material distribution station (6x6) for the central supply of materials in plastics processing. Cjdpfxszcvgwj Afgshc The system has a robust design and is intended for continuous industrial use. The use of hardened steel profiles makes the material distribution station particularly wear-resistant and ideally suited for abrasive plastics. Thanks to its compact design on a pallet, it is easy to transport and can be quickly put into operation.

Condition: like new (used), Year of construction: 2023, load capacity: 2,000 kg, Sideros turning device, column lift rotary unit, one side mobile with positioning table, 2-ton load capacity. Brand new, year of manufacture 2023, unused, with remote control. Minimum working height 350 mm, maximum working height 1800 mm. Torque 3000 Nm. Speed 1 rpm. Vertical adjustment speed 560 mm/min. Vertical lift 1450 mm. Clamping plate diameter 600 mm. Motor power 4.45 kW. Rotary movement 0.75 kW. Lifting motor 1.85 kW. Unit height 2505 mm. Weight approx. 1050 kg. Condition as new, unused. Shipping possible. Includes documentation, plans, etc. Cjdpfx Afsy Hl H Nsgjhc

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, load capacity: 50 kg, total height: 2,300 mm, total length: 1,500 mm, total width: 1,500 mm, type of input current: three-phase, rotary table diameter: 700 mm, table load: 50 kg, The device is designed to measure radial and axial runout of rims within specified value ranges. The measurement system consists of left and right supports, which can move forward and backward within a range of 330 mm and up and down within a range of 170 mm. This enables simultaneous measurement of the rim at 4 points. The device can operate in manual and automatic modes. Chodpfx Afew Hwxwsgjc

Condition: used, Vibrating spiral conveyor / sorting device / spiral conveyor / vibrating conveyor GRIMM Type VZ 40 L Year of manufacture: 1998 Top diameter (upper): 620 mm Top diameter (lower): 350 mm Top internal height: approx. 200 mm Sorting track width: 50 mm Codpozugqijfx Afgehc Overall height (drive + top with sorting track): 430 mm Overall height (drive + top with sorting track and enclosure): 500 mm Mains connection: 220 volts, 50 Hz. - Substructure with stepless height adjustment, manually operated via threaded spindle, approx. 1250 to 1700 (top edge of the soundproofing enclosure) - Rubber coating inside the top partially worn Space requirement L x W x H: 850 x 730 x 1250 mm Weight: 185 kg The device is normally operated with an intermediate device for stepless speed control. This device is not included. A spiral conveyor always consists of two essential components: 1) Sorting top, in which the parts are aligned 2) Drive, which generates vibrations in the sorting top through mechanical oscillations and thus sets the parts in motion.

Condition: good (used), Welding table with rotating fixture (custom-built) Tabletop: 2000 x 1000 mm Working height: 640 mm Thickness: 28 mm Weight: approx. 1500 kg Chsdpfx Afjfhnv Ajgec Fixture is bolted to the tabletop! Fixture can be moved by motor over a distance of 500 mm Overall height: approx. 1750 mm Length: 2700 mm

Condition: used, length 900 mm width 505 mm height 110 mm weight 310 kg The electro-magnetic clamping plate is in good, ready-to-use condition. Length: 900mm Width: 505mm Height: 110mm Weight: 310kg We have two identical magnetic chucks with the same dimensions. See Chsdpfjwth Tfox Afgjc S9062

Condition: used, length 700 mm Cjdpfx Afjwth Trjgjhc width 500 mm height 105 mm weight 260 kg The electro-magnetic clamping plate is in good, ready-to-use condition. Length: 700mm Width: 500mm Height: 105mm Weight: 260kg We have two identical magnetic chucks with the same dimensions. See S9064

Condition: good (used), clamping plate, welding table, welding table, straightening plate, straightening table -Clamping plate: with base frame -Clamping surface: 4400 x 2200 mm -Table height: 875 mm -Plate thickness: 30 mm Cedpev E Edmefx Afgohc -Flatness: see photos (straightening sheath not included) -Transport dimensions: 4000/2200/H875 mm -Weight: 2222 kg

Condition: good (used), Year of construction: 2012, Lothar Starke Airless piston pump HP 4/32 Cjdpfoy A Tpqsx Afgjhc Lothar Starke Airless unit including spray gun Tripod stand Ratio: 32 / 1 Package with filter Compressed air manometer Good condition Location: in stock at 54634 Bitburg - immediately available -

Condition: used, centre height 250 mm weight of the machine ca. 120 kg Reversible clamp with angle scale and three-jaw chuck Dimensions: Chuck diameter 255 mm 60 mm bore Center height 250 mm Base area 350 mm x 400 mm Item Features: Our offers are used items, i.e. can Soiling, storage marks, damage, such as scratches and color defects may also be present. Cedpfx Afey Sux Ssgehc Errors in technical data and description reserved

Condition: new, centre height // mm total power requirement / kW weight of the machine ca. / t required space / m Parts machine for lids FP1 / FP2 Chjdpfjzcgfqex Afgjc Condition: NEW

Condition: used, length 450 mm width 140 mm height 100 mm Chsdpfxozcghrj Afgsc 2 magnetic plates with control unit approx. 450 x 140 x 100 mm

Condition: used, length 900 mm width 505 mm height 110 mm weight 310 kg The electro-magnetic clamping plate is in good, ready-to-use condition. Length: 900mm Width: 505mm Height: 110mm Cedpfozcgkyox Afgshc Weight: 310kg We have two identical magnetic chucks with the same dimensions. See S9061

Condition: new, weight / kg Cjdpfsymgbaex Afgehc taper MK / Berg Spanntechnik BERG 376.14917.000.0 Q1107 Hydraulic clamping head New/new. Price is per piece. 2 pieces available Typ: SPH20 d1: 85mm d2: 105mm d3: 125mm d4: 85mm Gewinde: 6xM8 l1: 54mm l2: 56mm FS: 20kN P: 80 bar

Condition: used, table length 1000 mm table width 1000 mm table load / t Cjdpfx Aegrndiofgohc weight 1100 kg table height 100 mm

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 07.019.0000.00 / 114247 / 006, The mobile nozzle pack installation device from Theilen Maschinenbau is designed for lifting and positioning nozzle packs during assembly work. The welded frame structure is mounted on four swivel castors and features side handles for manual movement. The upper working beam is raised by a centrally mounted hydraulic hand jack and guided by two vertical guide elements. The beam is fitted with adjustable supports and mounting pins. The maximum load capacity is 200 kg. The device was manufactured in 2020 and bears CE marking. Safety symbols indicate a hot surface, an overhead hazard and the required use of head, hand and eye protection. Manufacturer: Theilen Maschinenbau GmbH Type: Nozzle pack installation device Number: 07.019.0000.00 / 114247 / 006 Year of manufacture: 2020 Maximum load capacity: 200 kg Lifting mechanism: Hydraulic hand jack Cjdpjzw T Duefx Afgehc Construction: Welded frame structure Undercarriage: 4 swivel castors Beam guidance: 2 vertical guide elements Conformity marking: CE

Condition: good (used), For sale is a universal length measuring device with numerous accessories from the brand Helios, in good, used condition, as can be seen in the pictures. Technical data: • Manufacturer: Helios Messtechnik • Type: 27 773 001 • Control model: Unitron 2 CHA • Universal length measuring device / adjustment device / shaft measuring device • With numerous accessories for various measurements • Mounted on a workshop trolley with contents (See pictures) • Condition: Used, functional (The cable or connector of the control unit would need to be replaced, presumably not original; the display turns off after a few seconds) Shipping costs via freight forwarder: approx. €140 International buyers are welcome! You will receive an invoice with VAT shown. Inspection / collection is possible by arrangement in 42855 Remscheid. Cedpozxiv Njfx Afgohc Sale from location 42855 Remscheid, free on board. Subject to errors in technical data and prior sale.

Condition: good (used), weight 35 kg amount 1 STK tension force 40 kN Cedozuplpjpfx Afgshc Röhm NC Compact Clamp RKK With standard jaws SA and normal jaws SGN—optimized for maximum working precision on CNC milling machines and machining centers with very high working precision. Size 1: Mechanical-hydraulic clamping system. Sizes 2-5: Mechanical- mechanical clamping system. Drive spindle with clamping force presetting, deformation-resistant design for maximum clamping accuracy, mounting thread for workpiece stop, clamping surface for clamping claws, With grease nipples on both sides, all guides subject to wear and the spindle thread can be lubricated quickly and easily—Stable steel base body and all guides are hardened and ground on all sides, Size 1: Long clamping slide with cross offset, hardened on all sides, functional surface ground, Size 2-5:

Condition: not inspected (used), Mitutoyo Quick Vision Apex QV-X404P1L-C CNC Image Processing Measuring Machine / Optical Measuring System Manufacturer: Mitutoyo Corporation Type: QV-X404P1L-C Code No.: 363-131EU Professional CNC image measuring system for non-contact dimensional measurement tasks. For sale is a used Mitutoyo Quick Vision Apex CNC image processing measuring machine, including the existing PC system, two monitors, control unit, measuring software, and extensive documentation. The existing PC system and the installed QVPAK software start. However, the complete machine and measuring function could not be fully tested. The Quick Vision series is used for non-contact dimensional measurement of workpieces using an optical system, image acquisition, and image processing. Suitable for precise measuring and testing tasks, including those involving components from the electronics, precision mechanics, and industrial manufacturing sectors. Technical data: Manufacturer: Mitutoyo Corporation Model: Quick Vision Apex Type: QV-X404P1L-C Code No.: 363-131EU Country of manufacture: Japan Machine type: CNC image processing measuring machine Measuring range X / Y / Z: approx. 400 × 400 × 250 mm Measuring principle: non-contact optical image measurement Cedpfxjztyabe Afgshc CNC-controlled measuring system Existing measuring software: Mitutoyo QVPAK QVPAK (R): Version 7.502.0010 QVGEO: Version 7.502.0010 Statistics: Version 7.502.0010 Equipment: Mitutoyo Quick Vision Apex measuring machine PC workstation Fujitsu Siemens CELSIUS PC system 2 Fujitsu monitors Keyboard and mouse Mitutoyo control unit / joystick with emergency stop QVPAK measuring software Mitutoyo MCOSMOS / MiCAT data carrier GEOPAK documentation QVPAK documentation Other Mitutoyo operating manuals and documents Clamping plate / workpiece fixture as shown in the picture Connecting cables and accessories as shown in the picture Application areas: Optical dimensional inspection Non-contact workpiece measurement Quality assurance Precision measurement technology Component and contour inspection Manufacturing and process control Scope of delivery: Mitutoyo Quick Vision Apex QV-X404P1L-C with PC workstation, monitors, control unit, existing software, documentation, and accessories as shown in the pictures. Scope of delivery is limited to what is shown in the pictures. Condition: Used Optical condition according to the pictures PC system and existing QVPAK software start. Signs of wear and tear due to age and use are present. Visible damage / signs of wear are present on the machine housing, see pictures. Important note: The machine has not been tested because it is in a protection mode after being moved. This is also intended by the manufacturer during machine transport. The machine must be put back into operation by qualified Mitutoyo personnel. Shipping by freight forwarder is possible. Subject to changes, errors, and prior sale. We are happy to answer any further questions by telephone.

Condition: used, Year of construction: 2005, functionality: fully functional, RAKO 12-Jaw Precision Clamping System Ø 1,600 mm with Extensive Jaw Set (2 units in stock) Manufacturer: RAKO GmbH, Gelenau Manufacturer's designation: 12-Jaw Chuck Year of manufacture: 2005 Documentation date: 2006 Drawing number: 0684.00-00 Article number: MPT-1023 / 1024 Offered is a used, stationary RAKO 12-jaw precision clamping system for mounting on a fixed machine table. The clamping system was used for machining brass cages for ball and roller bearings. It is not a conventional turning chuck for a machine spindle, but rather a permanently mounted workpiece clamping device. The design features twelve basic jaws arranged radially and evenly around the circumference. This distributes the clamping force over numerous contact points. This clamping principle is particularly suitable for large, ring-shaped, thin-walled, sensitive, or easily deformable workpieces. According to the existing manufacturer's drawings, different jaw positions are possible for internal and external clamping. The clamping system has an outer diameter of approximately 1,600 mm and a weight of approximately 2,000 kg. Scope of delivery - RAKO 12-jaw clamping system, Ø approx. 1,600 mm - twelve radially arranged basic jaws - extensive set of various clamping and adapter jaws - different interchangeable and clamping elements - additional fastening and accessory parts as shown in the images - separate wooden crate with jaws and accessories - original RAKO operating manual - overall, section, and detail drawings Cjdpfx Aozx D A Djfgehc - drawings of various clamping positions The exact quantity and assignment of all jaws and accessories have not been finally determined. The scope of delivery is based on the images. Condition Used condition with signs of wear and tear due to age and use. Scratches, dirt, discoloration, and, in some places, slight surface rust or corrosion can be seen on the clamping system and individual accessories. Technical data - Outer diameter: approx. 1,600 mm - Weight: approx. 2,000 kg - Number of basic jaws: twelve - Jaw arrangement: radial and even - Clamping options: internal and external clamping - Jaw stroke: 28 mm according to drawing - Total clamping force: approx. 190 daN at 35 Nm actuating torque - Maximum torque on the actuating spindle: 100 Nm - Locking air: present - Maximum locking air pressure: 5 bar - Lubrication: on the twelve basic jaws and the actuating spindle - Transport: three threaded holes M30 for crane screws Mounting on the machine table According to the RAKO operating manual, mounting is done with 14 cylinder head screws M20 × 180 according to DIN 912, strength class 10.9. The specified tightening torque is 300 Nm. Jaws and accessories The scope of delivery includes an extensive range of different clamping and adapter jaws. Documented, among other things, is an adapter jaw H41 with drawing number 0721.02-03 and a finished size of 55 × 50 × 46 mm. Dimensions of clamping system: approx. 1,600 × 1,600 mm Height: to be determined Weight: approx. 2,000 kg Total shipping weight: over 2,000 kg plus accessories and packaging