Used Clamping Chuck for sale (11,748)

Condition: excellent (used), Three-jaw chuck from Röhm Ijdpfxjvxz T Rj Ahvshw Diameter 315 mm (28593) stock number max. n1 min/2000 equipped with hard base jaws and screwed-on soft jaws. Weight 42 kg

Condition: excellent (used), Four-jaw chuck Arowa No.8 (28592) Diameter 250 mm Through hole 68 mm Iodpfx Ajvx Acyshvjhw Weight 20 kg

Condition: used, functionality: fully functional, Year of construction: 2019, load capacity: 1,300 kg, Carton clamp ISO Class: ISO Class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: good Description: Year 2019 ISO 2A (41 cm) Capacity 1,300 kg Opening range 440-1,820 mm Width 1,150 mm Clamps 1,270x1,200 mm ID OS1881 Ihedpeyi Ncfsfx Ahvsw

Condition: used, functionality: fully functional, Year of construction: 2020, load capacity: 6,500 kg, Bale Clamp Iedpfx Aoyi Nbhshvjhw ISO Class: ISO Class 4 = 5,000 - 10,000 kg Condition: Ready for use and fully operational Technical Condition: Good Description: Year: 2020 ISO 4A (61 cm) Capacity: 6,500 kg Sideshift Opening range: 530–2,740 mm Width: 2,200 mm Clamp arms: 1,800 mm ID: OS1866

Condition: used, functionality: fully functional, Year of construction: 2018, load capacity: 800 kg, Carton clamp ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: good Description: Year 2018 ISO 2A (41 cm) Capacity 800 kg Sideshift valve Width 950 mm Clamps 870x800 mm ID OS1841 Ihsdpfsyi I Rzjx Ahvjw

Condition: used, functionality: fully functional, Year of construction: 2019, load capacity: 2,800 kg, Bale clamp Load center: 750 ISO class: ISO class 3 = 2,500 - 4,999 kg Isdoyi I Ruepfx Ahvjhw Condition: Ready for use and fully functional Technical condition: good Description: Year 2019 ISO 3A (51 cm) Capacity 2,800 kg / 750 mm Sideshift Width 1,450 mm Clamps 1,500 mm ID OS1839

Condition: reconditioned (used), overall weight: 30 kg, chuck outer diameter: 200 mm, three-jaw chuck diameter: 200 mm, short taper mount: 6 mm, through hole: 45 mm, Three-jaw power chuck including 1 set of stepped block jaws Manufacturer: FORKARDT KTNCV 200-45. Three-jaw power chuck; the price listed applies to 1 three-jaw chuck with stepped block jaws. ----- Jaw travel is actuated via clamping cylinder and draw tube. Chuck no. 1485270 with through-hole clamping (pass-through bore). ----- Cylindrical flange mount according to DIN 55027 Short taper, taper size: KK6 ----- Three-jaw power chuck with quick-change system Also suitable for reversible base jaws Type: FGB 200 ----- Jaw interface: Base jaw type: helical gearing; Designation → Size: FGB200, SGB200 ----- Draw tube connection M52 x 2 mm Cylindrical mount for spindle flange ø 170 x 6 mm Mounting bolt circle for 3x ZK screws approx. 135 mm ----- The chuck is in near-new condition. Weight without clamping jaws approx. 25 kg ----- Iodpfjwuux Djx Ahvohw Delivery without base and top jaws. *If you have any questions, please feel free to contact us. *Shipping costs for international delivery available on request.

Condition: good (used), functionality: fully functional, Console base, head adjustable by 600 mm Iodoyi Hm Uepfx Ahvehw Drilling capacity 40 mm 2 speed ranges, stepless 60 – 1600 rpm 3 feeds 0.1 / 0.16 / 0.25 mm/rev Taper MK 4 Throat approx. 330 mm Quill stroke 220 mm Weight estimated at 1 t (Shown here as sample: 1-axis table with 250 mm cross travel, clamping surface 600 x 240 mm)

Condition: excellent (used), functionality: fully functional, Year of construction: 1996, Beam clamp corso LT-2B, 2.0 t, 7019, GRIPPER Iodpfxjv U R T Es Ahvohw Compact and robust beam clamp with lifting eye for one person. Quick and easy adjustment to the profile width. • Opening dimension max. 235 mm • Load capacity 2 tons • Flange width 75 - 210 mm • Weight approx. 5 kg This product is new and unused. It was hung in our showroom. See images for scope of delivery. You will receive an invoice with VAT shown. Payment: Advance payment by bank transfer - NO PAYPAL! We are happy to answer any questions you may have.

Condition: used, As-new CNC chuck lathe TAIKAN model HPT 08-380 Serial No. 2015122 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Maximum turning length without chuck: 350 mm Maximum turning length with chuck: approx. 300 mm Turning diameter (nominal): 250 mm Swing diameter over bed: 500 mm Travel of Z-axis: 385 mm Travel of X-axis: 200 mm Feed rate (X + Z): 1–8000 mm/sec. Rapid traverse (X): 30,000 mm/sec. Rapid traverse (Z): 36,000 mm/sec. Spindle speed, max.: 4500 rpm Spindle bore: 66 mm Draw tube bore: 50 mm Spindle nose: presumably A2-6 Workpiece weight incl. chuck: max. 200 kg Spindle drive motor power: 11 kW Power supply: 400 Volt, 50 Hz - Electronic handwheel - USB, LAN data interface + CF card - Drum turret with 12 tool stations - Hydraulic 3-jaw power chuck, Ø 215 mm - Infinitely variable spindle speed - Coolant unit - Chip conveyor with rear discharge + basic chip cart Iodpfx Ahjwz Rifevjhw Machine footprint with chip conveyor: Length 2200 mm x Depth 2750 mm x Height 1700 mm Machine space requirement: Length 2200 mm x Depth 1750 mm x Height 1700 mm Chip conveyor dimensions: Length 2700 mm x Width 600 mm x Height 1400 mm Weight: 3.5 t Very good condition – as new Machine comes from a showroom and has only a few operating hours.

Year of construction: 2010, condition: good (used), Power chucks for vertical and horizontal CNC lathes Manufacturer: SCHUNK Type: ROTA NCO260 year 2010 diameter 260 mm with intermediate flange diameter 220 mm spindle nose in flange DIN 55028 / A6 Ihedpeikzy Dofx Ahvow Thread in tie rod M24 N max: 4500 rpm In good condition. 2.pieces available Price is for 1.piece.

Year of construction: 1980, condition: good (used), Movable clamping table make WAGNER type: FE4000 year 1980 Ihjdpfxeg Uf I Ae Ahvow Travel : 4 000 mm table surface : 4000 mm X 1400 mm Feed rate : 8 - 2500 mm/min Rapid traverse : 4 m/min load capacity. Max : 12 500 kg Weight : approx. 12 000 kg In good condition. Hydr.clamping and worm drive

Year of construction: 2010, condition: excellent (used), CAST MEASURING SPLETTE Fabr.STOLLE Type:GMP 6000 Bj.ca.2010 Dimensions: length 6000 mm width 2500 mm height 360 mm. Very good condition. Weight.about 16 000 Kg. Iodpog Uf Nkefx Ahvjhw

Year of construction: 2000, condition: good (used), Casting top plate make STOLLE Type:ASP 1610 length : 1610 mm width : 250 mm height : 60 mm T-slot for M16 Ijdpfehcin Hex Ahvohw Good condition.

Condition: excellent (used), Year of construction: 2004, T-slot clamping plate with frame MÜHLENBAUER Type: ASP 2240 Year 2004 in very good condition . Iodpfx Ahsq H Ectovshw Plate : 2240 mm X 2240 mm X 80 mm Frame : 2000 mm X 2000 mm Total height : 320 mm T-slots for M24 T-slot nut Weight : 2300 KG

Condition: like new (used), Year of construction: 2010, Casting clamping angle Fabr.SAV Typ:AW71863 Bj.ca.2010 Ihsdpfehcimwex Ahvjw As good as new with 315mm Röhm chuck bore 100 mm Width : 500mm Depth : 310 mm Height without base plate: 550 mm Height with base plate: 585 mm Base plate : 500 mm X 400mm Center height : Chuck : 325 mm is hardly used Very good condition with chuck key .

Condition: good (used), Year of construction: 1990, Clamping angle Fabr.AMF Type:1430 Year 1990 Isdou Hgrxopfx Ahvehw Clamping surface : L 1430 X H1130 XT1150 mm T-slot 24X40X40 mm in good condition .

Condition: good (used), Year of construction: 2010, 4 jaw air chuck SCHUNK Type: ROTA TB 850-270 LH/4 Year 2010 with control unit . Chuck diameter 850 mm Bore 270 mm Ijdpfx Aheubbx Hsvshw Jaws are individually adjustable with many soft jaws in good condition.

Year of construction: 2010, condition: good (used), Power chucks for vertical and horizontal CNC lathes Make:RÖHM Type:KFD 400 Tie rod M24 Nmax:2000 rpm Ihedpeikzzpefx Ahvjw Good condition .

Condition: good (used), Year of construction: 2015, Manual collet chuck Fabr.Ortlieb Type: SSF60/8 Year 2015 Max. throughput : 60 mm Spindle speed Max : 3000 rpm Spindle holder DIN 8 Ihedpfx Ahsucw Hpsvjw In good condition without collets .

Condition: used, Year of construction: 2005, Hydr.3-jaw power chuck FORKARDT Type:3KS630 built approx.2005 Diameter.630mm Pulling rod winning M30 With 1Parr hard jaws Fmax 13000daN Iodpechfr Njfx Ahvjhw Max speed 1200rpm Good condition.

Condition: like new (used), Year of construction: 2010, Hydr.power chuck Fabr.RÖHM Type : KFD-315 Bj.ca.2010. Diameter :315 mm Nmax:2800rpm in very good condition Ijdpfeqxavljx Ahvehw

Year of construction: 2000, condition: good (used), 3-jaw wedge bar chuckFabr.SMW Typ:HG 200 bj.ca.2000Bore 50mmFlansch Aufnahme Diameter 170mmWithout jaws,with chuck key.chuck in good condition. Ihodpfx Ahsd Sym Aevew

Year of construction: 1997, condition: excellent (used), Hydraulic system - clamping hydraulics For tool clamping - Clamping device Make:BACHOFEN HYDRAULIK Type:HA3B-L1/90 Year.15/1997 Tank : 3 L Clamping pressure :90 Bar In very good condition . Isdpfx Ahjmx Slzevehw

Condition: good (used), functionality: fully functional, 315 mm and 250 mm chucks, with central adjustment and individual adjustment of the clamping jaws, Ihedpfxoyidmvj Ahvew