Used Cl500 Q for sale (257)

Condition: new, Year of construction: 2025, fuel type: diesel, power: 136 kW (184.91 HP), motor manufacturer: Cummins 6BTAA5.9-G7, General information Field of application: Construction Weights Empty weight: 1.973 kg Prodpfx Aewddwbjgwoc Functional Generator capacity: 170 kVA CE mark: yes Other information Fuel consumption: 31.5 Liter per Hour at 75% Load Generator: Stamford UC274F Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 400 l Transport dimensions (LxWxH): 3,1x1,18x1,95 Production country: PT Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information Requesting a EUR.1 Certificate is possible for this Generator. Warranty: 1 year for continuous use 2 years for standby use

Condition: excellent (used), Thyristor controller with field regulator (28211) Make Unitek type 82 Classic Q. 3 400/450-60 UE 400 UA 450 ld 60 A Ia 120 A Predpfehhyy Rsx Agwsc Weight 11 kg Width 290 mm Depth 230 mm Height 225 mm

Condition: used, Year of construction: 2020, Wire erosion / EDM Predpfx Agow H Aw Eswec Travel distance X: 600 mm Travel distance Y :400 mm Travel distance Z: 270 mm max. workpiece size X: 920 mm max. workpiece size Y: 700 mm max. workpiece size Z: 215 mm max. workpiece weight: 5000 kg submerged cooling unit

Condition: used, functionality: fully functional, machine/vehicle number: 0012, Year of construction: 2005, load capacity: 1,800 kg, lifting height: 5,200 mm, fuel type: electric, mast type: triplex, drive type: Elektro, High-lift order picker Chassis number: 0012 Load center: 600 Mast type: Triplex Prjdpexglvbsfx Agwjc Condition: Ready for use and fully functional Technical condition: normal Front tire type: Polyurethane Rear tire type: Polyurethane Battery type: PzS

Condition: used, Power: 250 kW (340 HP) Manufacturer : SPX APV Model: Rannie – R275 Q-70 5140 X Type : Piston homogenizer Pwer : 250 KW Max pressure : 300 Bars Max. capacity: 27,000 L/H Stainless steel casing with pre-insonization. Psdpfovlym Nox Agwerc Number of pistons: 5 Homogenizing stage / effect: 2 Floor support available, not visible on photos. Second identical unit available: Reference osertech # 12049

Condition: ready for operation (used), TOX Pressotechnik Kraftpaket Q-K 002.030.200.34 Pneumatic cylinder Line - Q - No.: 340375.30, used, good condition, 100% functional, scope of delivery as per photos Podpfxexaiads Agwjrc

Condition: new, Year of construction: 2025, fuel type: diesel, power: 264 kW (358.94 HP), motor manufacturer: Cummins QSL9-G7, General information Field of application: Construction Weights Empty weight: 3.400 kg Functional Prodpsv N Tlaofx Agwec Generator capacity: 330 kVA CE mark: yes Other information Fuel consumption: 59 Liter per Hour at 75% Load Generator: Stamford HC444D Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage IIIA / Tier III Water tank volume: 995 l Transport dimensions (LxWxH): 4,015x1,4x2,495 Production country: PT Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information Requesting a EUR.1 Certificate is possible for this Generator. Warranty: 1 year for continuous use 2 years for standby use

Condition: like new (used), functionality: fully functional, Year of construction: 2023, load capacity: 250 kg, mast type: telescope, lifting height: 16,000 mm, overall weight: 2,940 kg, transport length: 5,840 mm, transport width: 790 mm, transport height: 1,980 mm, fuel type: diesel, ALMACRAWLER Billennium B1890 EVO Q-PRO - Demonstration unit, year of manufacture 2023, in mint condition! Telescopic crawler work platform Max. working height: 18.00 m Max. working height while driving: 9.00 m Max. lateral outreach: 10.90 m / 80 kg Max. load capacity: 250 kg Platform rotation: +/- 70° Slew range: 185° Climbing ability: 20° Drive: Yanmar 2TNV70 diesel engine, 10.2 kW Color: red / black Special features: bright non-marking tracks, large work basket 1.80 x 0.70 m, electric pump 230V Features: - PLC system, operation and driving without outriggers up to 9.00 m height possible - QUICK-PRO, automatic stabilization configuration system, automatic leveling with 6-way variable settings - ATS system, automatic hydraulic track tensioning system - Removable work basket - Cable remote control with color display - Home function - Control panel cover Podpfxowz Ifqe Agwjrc Available ex-stock Langenhagen. All information about the machine is provided without guarantee. Subject to errors, typing mistakes, and prior sale. Leasing offers available through partner companies.

Condition: used, Year of construction: 2014, Wire erosion / EDM Travel distance X: 400 mm Psdpfx Agow H Awxjwsrc Travel distance Y :300 mm Travel distance Z: 250 mm max. workpiece size X: 600 mm max. workpiece size Y: 470 mm max. workpiece size Z: 240 mm max. workpiece weight: 500 kg table size X: 860 mm table size Y: 690 mm with AWF ( Automatic Wire Feeding ) U / V axis: 150 x 150 submerged cooling unit

Condition: good (used), Temperature controller, temperature sensor, temperature setting, signal converter, temperature converter, temperature limiter, electronic temperature controller, process controller -Manufacturer: single, temperature controller Digitemp Q -Type: TQD 3110 D -Measuring range: 0 to 399 °C Prodeudqbispfx Agwjc -Dimensions box: 220/130/H135 mm -Weight: 0.8 kg

Condition: used, Power: 250 kW (340 HP) Manufacturer: SPX APV Model: Rannie – R275 Q-70 5140 X Type: Piston homogenizer Power : 250 KW Max pressure : 300 Bars Pjdpfx Asvlyxfsgwsrc Max. capacity: 27,000 L/H Stainless steel casing with pre-insonization. Number of pistons: 5 Homogenization stage / effect: 2 Machine stand available, not visible on photos. Second identical unit available: Reference osertech # 12048

Condition: excellent (used), Year of construction: 1995, WEINIG Q 18 - immediately available - long infeed table 2000 mm Pedpfx Ajvdfyregwjrc - 4 spindles

Condition: new, Year of construction: 2025, fuel type: diesel, power: 220 kW (299.12 HP), motor manufacturer: Cummins QSL9-G7, General information Field of application: Construction Weights Empty weight: 3.177 kg Psdjv N Tltepfx Agwjrc Functional Generator capacity: 275 kVA CE mark: yes Other information Fuel consumption: 50 Liter per Hour at 75% Load Generator: Stamford UCD274K Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage IIIA / Tier III Water tank volume: 995 l Transport dimensions (LxWxH): 4,015x1,4x1,495 Production country: PT Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information Requesting a EUR.1 Certificate is possible for this Generator. Warranty: 1 year for continuous use 2 years for standby use

Year of construction: 2003, condition: ready for operation (used), functionality: fully functional, For cutting uniform cubes, strips and slices from various products, such as potatoes, vegetables (carrots, celery, etc.) and fruit. Prsdpfoxbcr Asx Agwoc

Year of construction: 1988, condition: used, table diameter 400 mm table load 0,126 t table height 100 mm Pjdpoipyx Nsfx Agwjrc weight 126 kg Dividing rotary table with 400 mm diameter of a Heckert FSS 400.

Year of construction: 2019, condition: excellent (used), Four-rope clamshell grab, mechanical clamshell grab, shell grab, ship unloading grab, rope grab, digging grab -Condition: New -Manufacturer: LAUDI GVE, four-rope clamshell grab type VZG ship unloading grab -Max. payload of the gripper: 5600 kg -Height of the closed gripper: 3810 mm -height of the open gripper: 4000 mm -Shell width: 2500 mm -Opening width: 4000 mm -Distance between the locking cables: 522 mm -Spacing of the holding cables: 180 mm -Gripper suspension: Q-Gripper -Bulk density: 0.4-0.8 t/m³ Prodsw Rnfuepfx Agwoc -Transport dimensions: 2480/4180/H2500 mm -Own weight: 4400 kg

Condition: used, Thread rolling machine, cold rolling machine, thread rolling machine, profile rolling machine Manufacturer PEE-WEE Type P 24 Q serial no. LC2403099 year of construction 2004 Rolling force max. 24 ton. Tool diameter max. 200 mm Rolling spindle diameter 69,85 mm Tool bore diameter 70 mm (nominal diameter) Predpfxsh A S Hts Agwec Tool length, tool length max. 180 mm Workpiece diameter max. 50 mm Rolling spindle speed 22 - 44 - 95 - 190 rpm Motor power hydraulics approx. 3 kW Motor power roller drive 5.5 kW Mains connection 400 Volt, 50 Hz - Swivel roller spindle for threaded continuous rollers - Rolling spindle speed in 4 stages via gear changeover - Hydraulic system integrated in the machine bed Space requirement L x W x H 2000 x 1750 x 2550 mm Weight approx. 3 tons good condition Grooving rollers: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The thread length is maximum as long as the rolling tools are wide. Continuous rolling: When the thread length is greater than the rolling tool width. Through-feed tools have 3 sections - the infeed, the calibration section and the outfeed. Grooved rollers have no pitch and are swiveled with the pitch angle of the profile to be rolled. Pitch rollers differ from grooved rollers in that they have a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Condition: used, Year of construction: 2007, 8 color Rotogravure press with aluminum cylinder system/carrier+sleeve Material Width 1100mm Printing width 1010 mm Print repeat 450 to 1000 mm Max speed 250 m/min Type Of Print Drying System: Oil Unwinder Type: Double turret Unwinder Diameter: 1000 mm Rewind Unit Type: Double Rewinder Diameter: 1000 mm Prjdpfxjw Du Nns Agwsc 1 single printing unit type QS-PRESS C1 6 QS-PRESS B1 units 1 reversible double printing unit QS-PRESS C2 Solvent-based inks OPG web Guide Pneumatic pumps Gama viscometers Independently controlled printing elements with servo motor in electric axis Solvent concentration control Web video 3000 camera system complete with defect control Automatic lateral and longitudinal register control 380 iron cylinders 750 aluminum cylinders for quick changes 40 carriers (5 sets of 8 pieces) 650 sleeves

Condition: new, Year of construction: 2025, fuel type: diesel, power: 176 kW (239.29 HP), motor manufacturer: Cummins QSB7-G5, General information Field of application: Construction Weights Empty weight: 2.191 kg Functional Generator capacity: 220 kVA CE mark: yes Predpfxov N Tk Nj Agwsc Other information Fuel consumption: 39.4 Liter per Hour at 75% Load Generator: Stamford UC274H Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage IIIA / Tier III Water tank volume: 400 l Transport dimensions (LxWxH): 3,2x1,18x1,95 Production country: PT Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information Requesting a EUR.1 Certificate is possible for this Generator. Warranty: 1 year for continuous use 2 years for standby use

Condition: excellent (used), machine/vehicle number: 4869639, Year of construction: 1990, operating hours: 4,800 h, load capacity: 3,500 kg, lifting height: 4,500 mm, free lift: 1,300 mm, load center: 500 mm, construction height: 2,200 mm, overall weight: 5,690 kg, enginetype: LP Gas, manufacturer: Clark Podpfx Aow R D Swegwerc

Year of construction: 2011, condition: ready for operation (used), Max. working length: 2000mm, compressed air supply: 6bar, connected load: 1200W, the machine was hardly used. Prsdpfxjlc N Sps Agwec

Condition: like new (used), Year of construction: 2024, functionality: fully functional, warranty duration: 12 months, total height: 83 mm, type of input current: AC, total width: 340 mm, total length: 240 mm, overall weight: 4 kg, Equipment: documentation/manual, For sale is a ZEISS ATOS Q 8M, a high-precision optical 3D scanner designed for demanding measurement and inspection applications. Ideal for precise 3D measurements in industrial and research settings. Quick setup and easy operation. Condition: Lightly used, primarily for trade shows, exhibitions, and training purposes. Scope of delivery: - ZEISS ATOS Q 8M scanner with MV500 - Original accessories as per standard configuration - Power supplies and cables - 10 m fiber optic cable - Includes tripod - Transport case included - Laptop included - Operating system: Windows 10 - ZEISS INSPECT OPTICAL 3D ZEISS INSPECT OPTICAL 3D Free: - Open and edit new and existing projects - Import of point clouds, polygon meshes - Create, edit, and process polygon meshes - Element construction: standard geometries, points, sections, curves, surfaces, dimensions - Import of standard CAD formats: IGES, VDA, STEP, JT Open, STL, PLY - Application of common alignment methods - CAD comparison with color-coded deviation visualization - Dimensional and GD&T evaluations according to ISO GPS and ASME Y14.5 - Reporting module Note: This device has only been used for demonstration, training, and presentation purposes, so some signs of use are visible. 3D acceptance certificate is available. In addition, when purchasing the ATOS Q, we would also consider trading in older GOM systems. Pjdpew Nx D Ejfx Agwjrc

Condition: used, HPLC Waters The system consists of these modules and components: HPLC Waters Binary Solvent Manager HPLC Waters Auxiliary Solvent Manager HPLC Waters HDX Manager HPLC Waters Pal System HPLC Waters Leap Synapt HDMS Mass Spectrometer HPLC Waters Binary Solvent Manager Flow control modules Flow rate from 0.20 to 5.00 µl/min Solvents are mixed in the T-piece outlet of the flow control module. Auxiliary solvent manager Flow rates from 0.10 to 5.00 µl/min. Flow control module Flow rate from 0.20 to 5.00 µl/min Sample manager The sample manager injects the samples it takes from microplates or vials into the chromatographic flow stream. In maximum throughput mode, the sample manager can perform an injection in approximately 45 seconds, including a single standard rinse, or it can do so in less than 60 seconds, including a double standard flush. The sample manager accepts standard impression plates, 5.03 $0.02 in. x 3.365 $0.02 in, SBS/ANSI compliant plates (maximum height of 2.2 inches, including covers). The sample manager can test samples at any temperature between 4 and 40 °C (39 and 104 °F) at ambient conditions of 25 °C (77 °F) or less. Heating and trapping module Podpfxevcnpae Agworc Inner diameter of up to 300 micrometers and a length of 250 mm Temperatures from 5 °C (9 °F) above ambient to 65 °C (149 °F). The column base can be swiveled outwards to any position between 0° and 180°. In the 0° "Home" position, the column base is located directly above the sample manager and can be connected to an optional optical detector. In the 180° "away" position, the analytical column can be connected to a mass spectrometer (on the right-hand side of the system). The Synapt G2 is a Q-TOF based mass spectrometer with an additional ion mobility cell, which enables orthogonal separation of ions based on their shape and conformation. Equipped with an intermediate quadrupole (8k), this highly versatile instrument can be used as a peptide identification only (LC-MSE data-independent acquisition), but also for denaturation and native MS analysis. Documents & Downloads Data sheet: Instruction manual Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: new, Year of construction: 2025, fuel type: diesel, power: 18 kW (24.47 HP), motor manufacturer: X2.5-G2, General information Field of application: Construction Weights Empty weight: 757 kg Functional Generator capacity: 22 kVA CE mark: yes Condition General condition: very good Technical condition: very good Pjdpfx Agjvyxh Uowjrc Visual appearance: very good Other information Fuel consumption: 4.4 Liter per Hour at 75% Load Generator: Stamford S0L2-G1 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 55 l Transport dimensions (LxWxH): 1,96x0,82x1,285 Production country: PT Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information Requesting a EUR.1 Certificate is possible for this Generator. Warranty: 1 year for continuous use 2 years for standby use

Year of construction: 2018, condition: ready for operation (used), Paper tube length/ diameter: 1000-1600/ 20-160mm, connected load: 1.5kW, length: 4600mm, width: 1500mm, height: 1400mm, weight: 680kg, with instruction manual. Pedpfxoilqr Ss Agworc