Used Cl 1000 Laser for sale (91,420)

Condition: new, The POSEIDON-1000 cleaning machine is designed to diagnose, wash, and dry DPF filters and catalytic converters of various designs, meeting EURO 5 and EURO 6 standards. The machine offers gentle and effective cleaning through a washing method that achieves excellent results without damaging the expensive filters. The stand operates based on hydro-impact and turbulent fluid movement, using special washing solutions and temperature regimes for effective cleaning. After cleaning, the filter's operating properties are restored by 97%. KEY FEATURES - Testing of the filter before washing to assess the degree of clogging and after washing to check the quality of the cleaning. - Automated washing cycle with the possibility of programming all operating modes. Filter cleaning is hydrodynamic, with hydraulic and pneumatic systems operating in specific modes to generate hydraulic impulses for the removal of contaminants. - Accelerated drying of the filter by means of a powerful hot air blower, which allows the complete removal of residual moisture from the product. >> This allows the entire cleaning cycle to be completed in a short time, >> and return to the customer a clean and dry filter ready to be fitted to the vehicle. Perspective business with POSEIDON-1000 • The equipment and technology allow to perform high quality cleaning of DPF particulate filters of all types and brands of cars. • The most functional stand among foreign analogues, thanks to which it has high productivity. Tsdpfspbv Hgjx Acyod • Automated operation and control of the process of cleaning and drying the filter allows the stand to be operated by one person. • Minimal resources and time required to open your own service for cleaning particulate filters with our equipment. • Maximum quick payback of the equipment if you own a service for the repair of automotive units. YOUR BENEFITS + Automated process of DPF filter cleaning with the possibility of programming all the machine's operating modes, gives you the opportunity to independently adjust the washing mode to increase the efficiency of the processes or to work with the modes set by the manufacturer. + Full control of the filter cleaning and drying process is guaranteed by the presence in the standard programme of graphs displaying air or water pressure values in real time. + The filter condition diagnostic function with report printing allows the creation of reports before cleaning (to check the degree of contamination) and after cleaning (to check the quality of the operation performed). + The working surfaces and the body of the stand are not subject to corrosion as they are made of stainless steel sheet material. + The hermetic chamber not only limits the spillage of technical fluids, but also reduces the noise level to acceptable levels, making work on the stand more comfortable and safer. + Quick installation of the DPF filter is possible thanks to a separate pneumatic system for the connection of a universal quick-fit adapter. + The universal tool allows the installation of any DPF filter, regardless of the vehicle type. + Closed-loop fluid filtration is achieved with coarse and fine filters. The filters are equipped with pressure gauges that allow the degree of contamination to be determined. + Rationally selected water tank volume allows to provide short fluid warm-up time, long time between fluid changes. Please contact us to get the best offer!

Condition: ready for operation (used), Year of construction: 2003, Weiler E50 x 1000 precision lathe (2003) Manufacturer: Weiler Type: E50 x 1000 Year of manufacture: 2003 Condition: good, used, under power Operating hours: 43.000h Technical data see pictures. Tedpfjxd Tikex Acyjd Included in delivery: - Original documentation - Rota S Plus 250-62 - Bezel - Parat 4 compartment tool turret

Condition: used, Year of construction: 2003, centre height 255 mm centre distance 1.080 mm turning diameter over bed 500 mm turning diameter over slide 290 mm turning length 1.000 mm control EuroTurn spindle bore 70 mm Todewizltspfx Acysd spindle taper KK 8 DIN 55027 3-jaw-chuck diameter 250 mm bed width 360 mm turning speed range 2 - 2.800 U/min rapid travel - longitudinal/face 10 / 5 m/min quick change toolholder PARAT Gr. 2 drive capacity - spindle motor 11,0 kW taper in tailstock-quill MK 5 dia. of quill 80 mm quill stroke 160 mm voltage 400 V total power requirement 16,0 kVA weight of the machine ca. 3,0 t dimensions of the machine ca. 2,85 x 1,60 x 1,80 m - Serial-No.: 495 / 03 - control: EuroTurn - quick change tool holder PARAT - coolant equipment - machine lamp

Condition: new, Year of construction: 2025, overall weight: 4,200 kg, total height: 600 mm, total length: 3,000 mm, total width: 1,000 mm, Clamping cube - T-slot plates 3000 x 1000 x 600 mm If you have not found the size you are looking for, you can also send us an e-mail with the completed PDF form. With this form we can produce an individual plate for you. Tsdpjtrlahsfx Acysd Parameters can be combined as desired. T-slots - width: T-slot spacing: Edge distance: Number of grooves: 10 Casting quality: HT250 Flatness less than 0,12 mm Surface machined according to DIN 876/III

Condition: good (used), machine/vehicle number: 21494, OFFER 21494 Technical data: - Clamping surface approx. L 900 x D 600 mm - Table height 480 mm - Circumferential water channel - 3 pieces T - grooves M 16 L 900 mm - lateral flange plate Tsdpfxehii R Do Acyod - Space requirement L 1000 x D 760 x H 480 mm - Weight approx. 300 kg

Year of construction: 2023, operating hours: 20 h, condition: used, functionality: fully functional, overall weight: 60 kg, input voltage: 220 V, laser power: 200 W, type of input current: AC, actuation type: electric, Technical Specifications: Laser: Pulsed laser Laser power: 200W Air-cooled Dimensions: 60cm x 28cm x 75cm (LxWxH) – Ideal for single-person transport! Sales price includes demonstration, training, and optional after-sales support - Immediately available Tsdpfjxcf D Dex Acyjd - Warranty Private sale only, selling due to purchase of a new unit! NEW PRICE: EUR 31,500.00 net Negotiable: EUR 19,500.00 net! Financing available for up to 6 years!

Year of construction: 2024, condition: new, PROFESSIONAL EQUIPMENT FOR CLEANING THE PANEL The purpose is to remove the stains and glue on the panels after edging. Three widths are available: 800 mm, 1000 mm and 1300 mm. The working height can be easily set from the touch screen controller. Once set, the machine adjusts automatically to the preset height. The panel cleaning operation takes place in three steps: 1 A layer of washing liquid is applied to the panel 2 Cloth rolls are used to reduce the Tjdpotry U Iofx Acyod thickness of the glue 3 A series of cloth cloths are used to clean the panel. This machine can clean EVA glue As for the working capacity, with 25 liters of cleaning liquid, this machine can clean 2000 to 3000 meters of squares of panels per day. _____ PROFESSIONAL AL EQUIPMENT FOR PANEL CLEANING The aim is to remove any glue left on the panels after edging. Three widths are available: 800 mm, 1000 mm and 1300 mm. The working height can be easily set from the controller's touch screen. Once set, the machine automatically adjusts to the preset height. The panel cleaning operation occurs in three phases: 1 Apply a layer of washing liquid to the panel. 2 Rolls of fabric are used to reduce the thickness of the collar. 3 Use a set of cloth wipers to clean the panel. This machine can clean EVA glue. As for the working capacity, with 25 liters of liquid detergent, this machine can clean 2000 to 3000 square meters of panels per day.

Year of construction: 2025, condition: new, Laser cleaning device for derusting, descaling and cleaning of materials and components. These are absolute professional devices. Ideal for vintage car restorations and in the automotive and metal and plastics industry. We are happy to help you find a solution and can test your project here in the factory. The handling of the machines is easy to learn. Tjdpfjiq I Nlex Acyjd

Condition: used, Year of construction: 2001, turning diameter 500 mm turning length 1000 mm control MONFORTS CONTROL control SYSTEM MTC-K turning diameter over bed slide 290 mm spindle bore 70 mm spindle turning speed range 3 - 2800 U/min spindle power 15 kW max. torque on the spindle 1530 Nm spindle head DIN 55027 Gr. 8 feed power X/Z axis 11300 N rapid travel - longitudinal/face 10 / 5 m/min bed width 360 mm travel of cross-slide 265 mm upper slide travel 140 mm Todpfx Asvh I Hvocyjd turning tool - shaft cross cut 32 x 25 mm tailstock quill diameter 80 mm tailstock quill stroke 160 mm tailstock taper MT 5 weight of the machine ca. 3,1 t dimensions of machine L x W x H 2,88 x 1,68 x 2,18 m Accessories: 3-jaw chuck ROTA-S plus 250 mmø, 4 pos. toolholder PARAT, coolant

Condition: new, Year of construction: 2025, overall weight: 1,800 kg, total height: 600 mm, total length: 2,000 mm, total width: 1,000 mm, plate height: 600 mm, groove spacing: 140 mm, GERD WOLFF Clamping cube 2000 x 1000 x 600 mm If you cannot find the size you require, simply send us an email with the completed PDF form. This will enable us to offer you a Tsdpfx Aoxbpihjcyod customised plate tailored to your requirements. T-slots – size: 38 x 22 T-slot spacing: 140 Number of slots: 10 Edge distance: 80 Weight: 1800 kg Cast iron quality HT250 Flatness less than 0.12 mm Surface machined according to DIN 876/III Clamping cube, cubic clamping table, multi-sided clamping, angle clamping cube, precision cube, CNC clamping cube, clamping angle, machine cube, 90-degree clamping device, drill hole cube, modular clamping cubes, workpiece positioning, assembly cube, fixing cube, clamping block

Condition: used, Used stacking rack with dimensions of 1480x1100x1000 mm. Tedpfxsw Swzns Acysd With two open short sides and two closed sides on the long side. With the open short sides, this stacking rack not only provides easy access to stored items, but also allows long material to be stored. This feature increases the rack's versatility. Thanks to its

Year of construction: 2000, condition: excellent (used), Neuman und Esser ICM 48/60 Classifier Mill, only the grinder without accessories, good condition. Additional we have a ICM 8 and a big ICM 1000 for sale Tjdpfsh Ugwysx Acysd

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. Manual laser cleaner 1500W LCH-1500-N Laser cleaner is an innovative device for efficient and precision cleaning of surfaces. It operates by focusing the laser beam on contaminants, causing them to evaporate or break down. Laser cleaners are used in various industries from automotive to preservation of monuments. It is characterized by high efficiency, minimal waste and reduced penetration of the cleaned surface. Compared to traditional cleaning methods, the laser cleaner can be more precise and cost effective. Tjdothitpspfx Acyjd Included in the price One-day training along with machine installation 1 day up to 8 hours—machine installation and training. Available to choose from MAX Photonics MAX Photonics was established in 2004. It is rooted in manufacturing light and optics sources for research institutes, where the quality and stability of the products are of paramount importance. The company quickly realized that the future of laser technology is firmly tied to fiber optics. Research and development started in 2007 resulted in the release of their first 500 CW source in 2014. Since then, the company has begun to vigorously develop its technologies related to laser cutting, welding, marking and engraving. 40000W laser sources can be currently found in their offer. The company has set a goal to become a pioneer in the manufacture of high-capacity industrial lasers. Raycus Wuhan Raycus Fiber Laser was founded in 2007. The company has opted for independent research and development based on mergers with other companies, and is involved in the manufacture of laser sources for a wide range of applications including cutting, welding, soldering, marking and engraving. The brand’s equipment is used in automotive, aerospace, medical, electrical and advertising industries.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, spindle bore: 80 mm, turning length: 1,000 mm, turning diameter: 430 mm, swing diameter over bed slide: 430 mm, spindle speed (max.): 3,600 rpm, TECHNICAL DETAILS Machining Area Turning diameter: 430 mm Turning length: 1,000 mm Swing diameter over bed: 430 mm Swing diameter over carriage: 220 mm Spindle bore: 80 mm Quill taper: 5 MT Spindle and Feeds Speed: 1 – 3,600 rpm Rapid traverse: 10/7 m/min Tsdpfxew A Rp Ue Acysd Stepless feed: 0 – 5,000 mm/rev Control: Heidenhain MPlus 620 HSCI MACHINE DETAILS Electrical Data Drive power: 16 kW Total power requirement: 16.5 kW Dimensions & Weight Dimensions: 2,800 x 2,100 x 1,900 mm Weight: 3,300 kg

Condition: used, functionality: fully functional, Inclined filter, make Leiblein Type: SF 1000 Tsdpew Evywofx Acyjd Filter area: 0,7 m2 Dimensions: approx. 1135 x 1310 x 650 mm Weight: approx. 145 kg net El. connection: 400 V / 50 HZ / 0,12 kW

Condition: excellent (used), Weiss SC 1000/+20IU Corrosion Climatic Cycle Test Chamber Weiss SC 1000/+20 JU Corrosion Climatic Cycle Test Chamber The test system is a combination of a climatic test chamber with variable temperature and humidity and a corrosion test chamber with a salt spray test. At-risk metallic components are tested for corrosion in a time-lapse manner according to the relevant standards. Temperature Working Range Temperature: +20 °C ... +60 °C Temperature variation over time: +0.5 °C Climatic Working Range Temperature: +20 °C ... +60 °C Temperature variation over time: +0.5 °C Relative Humidity: 10...98 % RH Temperature variation over time: 3...5 % RH Dew point: +12 °C ... +59 °C Salt spray test SS (ambient temperature range +5 °C ... +50 °C) according to DIN 50 021 (salt spray via dual-fluid nozzle, 1.5 x 0.5 mV 80 cm h) Control Digital measurement and control system SIMCON/32*-Net with touchscreen control panel Interfaces - Serial interface RS 232 C - Parallel printer interface Operating modes adjustable via process controller: - Temperature mode - Air conditioning mode - Salt spray test - Direct spraying with saline solution - Condensate load - Flushing test chamber walls - Drying/ventilating test chamber Temperature sensor: Pt 100 resistance thermometer Humidity sensor: Psychrome fresh measuring device TFT (with forced humidification) Technical data SC 1000/+20 JU Usable space dimensions Height up to sloped roof approx. 1000 mm + roof approx. 350 mm Width approx. 1100 mm Width between heaters approx. 1000 mm Depth approx. 1000 mm Test room door made of glass, hinged on the left Height approx. 1350 mm Width approx. 1000 mm Tjdpeph U Dhofx Acyed External dimensions including unit components and control cabinet Height approx. 2100 mm Width approx. 1450 mm Width with touch control panel approx. 1700 mm Depth approx. 2600 mm Floor load max. 100 kg Brine storage tank approx. 200 l, with level monitoring separately next to/behind the unit Height approx. 1000 mm Width approx. 600 mm Depth approx. 900 mm Electrical connection: 400 V Power rating: 13 kW Weight: 1300 kg Find more items – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), CTS Climate test chamber C-55/1000 Li water-cooled Temperature range: -50°C to +100°C Humidity range: 5 to 95% RH Dew point range: 5°C to +78°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Nominal current: 18 A Compressor: TFH2511Z / TFH2511Z Refrigerant R404A/R23 The type designation of the CTS cabinet series is composed as follows: z. e.g. type C -55/1000/Li 1) C means: climate 2) -55 means: lower temperature -55 °C Todpfx Asva Hi Hjcyed 3) 1000 means: 1000 liter test chamber volume 4) Li means: special equipment for tests with lithium-ion accumulators Control: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text Ethernet interface RS 232 interface Free switching channels for on-site test material control Test room lighting: energy-efficient, high-intensity LED light strip mounted on the door Insert grid: Stainless steel, support surface 970 x 980 mm Load per shelf max. 35 kg Total load with max. grating load 100 kg 1a Feed-through NW50 1b Feed-through 2x NW125 1c Entry port 2x Rp 314° for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat compensation approx. 4000 W at +20°C approx. 2200 W at -40°C Climate tests: Temperature range +5 °C to +95 °C Humidity range 5% to 95% rel. humidity Dew point range +5°C to 78°C Temperature deviation ≤ ±1.0 K in time Humidity deviation ≤ ±3.0% relative humidity over time The technical data refers to an ambient temperature of +25 °C, rated voltage 400V, without test material, without heat compensation and without additional equipment. Options may influence the performance data. Dimensions: Test volume 1000 liters Test chamber dimensions Height, approx. 1000 mm, width, approx. 860 mm, depth, approx. 1100 mm External dimensions Height, approx. 1950 mm, width, approx. 1270 mm, depth, approx. 1900 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Nominal current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (according to DIN EN ISO 3744 measured at a distance of 1 m from the front) Mass approx. 1000 kg Heat output to the installation room 10.4 kW Cooling unit: water-cooled, low-noise, fully hermetic Infinitely variable output adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 1985, condition: excellent (used), This presss is part of a two automated production lines for automóviles pannels, each line consist of five presses, 1x1600 Ton, 2x1000 Ton, 2x500 Ton, plus robots an federes, we can del the complete Line as apackage or each Press individually, all are KOMATSU Stamping Class A. Todpfx Acefxx E Isyjd

Condition: used, Cast iron clamping cube 2 faces Todpew Aavkjfx Acyjd Length: 1000 mm Height: 600 mm Depth: 800 mm T-slots dimensions: 38 x 22 mm Weight: approx 600 kg

Year of construction: 2025, condition: new, Laser cleaning device for derusting, descaling, and cleaning of materials and components. These are absolute professional-grade machines. Ideal for classic car restorations as well as use in the automotive, metal, and plastics industries. We are happy to assist you in finding the right solution and can test your application here at our factory. The operation of these machines is easy to learn. Todpfswzv Dusx Acyod

Condition: good (used), overall weight: 2,800 kg, total length: 1,500 mm, total width: 1,000 mm, total height: 900 mm, Manufacturer: CORREA Type: Box Table Year of manufacture: 2006 Specifications Metric US Standard Number of T slots: 8 Pitch from T to T: 150 mm T dimension: 22 mm Number of T-slotted sides: 2 Todpfxswp Dn Dj Acyed Dimensions (approx. estimate) Length: 1500 mm Width: 1000 mm Height: 900 mm Weight: 2800 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend you verify all important details.

Year of construction: 2004, operating hours: 34,304 h, condition: excellent (used), Weiss climatic test chamber -70 to +180 °C Manufacturer: Weiss Umwelttechnik GmbH Type: Climatic chamber WK-1000/70 Test chamber volume: 990 liters Temp. range: -70 to +180 °C Humidity: 10 to 98 % Mains voltage: 400 V 3/N 50 Hz Rated current: 29 A Nominal output: 13.8 kW Refrigerant: R 404A Todpfx Acsph U Ayjyjd Control system SIMCON/32 microprocessor-controlled control and monitoring system - 32 bit technology - Graphic display of setpoint and actual value - Digital setpoint and actual value display of temperature and % relative humidity - digital input for temperature in °C and humidity in % rel. humidity - Integrated programmer - program memory - Manual and automatic operation - Fault diagnosis system Operating hours: 34303.8 h Year of construction: 2004 Test area dimensions: Height: 950 mm Width: 1100 mm Depth: 950 mm External dimensions: Width: 1400 mm Depth: 1900 mm Height: 1970 mm Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: good (used), White Type: WK1-1000/70 Weiss climatic test chamber water-cooled Tsdpsrvx Ezofx Acyod (refrigerant converted to R-452A) Touch panel" control unit All control and operating commands can be triggered by simply touching the function icons on the all control and operating commands by simply touching the function icons. Feedthroughs The test chamber is equipped with feed-throughs on the right and left side. Measurement cables and test equipment can be routed into the test chamber through these. Feed-throughs: 1 feed-through ∅ 125 mm installed on the right 1 feed-through ∅ 50 mm installed on the left Volume 990 liters Test chamber dimensions: Test chamber: width 1100 mm, depth 950 mm, height 950 mm Housing: width 1385 mm, depth 1850 mm, 1980 mm Data for temperature tests: Minimum temperature -70 °C Maximum temperature +180 °C Temperature deviation, temporal ± 0.1 to ± 0.5 K Temperature homogeneity, spatial ± 0.5 to ± 2 K Temperature change rate, heating 4 K/min Temperature change rate, cooling 2.5 K/min Max. heat compensation 2750 W Data for climate tests: Temperature range +10°C to +95°C Humidity range 10 to 98% r.h. Temperature deviation, temporal ± 0.1 to ± 0.3 K Temperature homogeneity, spatial ± 0.5 to ± 1 K Humidity deviation, temporal ± 1 to ± 3% r.h. Data for operation: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Nominal current: 29A Nominal power 19.8 kW Refrigerant: R-452A/ R23 Weight approx. 910kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Clamping table, clamping angle, T-slot table, round table, milling machine table, turning table, cross table, cross-sliding table, boring table -Manufacturer: Scharmann, clamping table drilling table rotatable -Table surface: 1400 x 1000 mm -Travel distance: 1200 mm Tsdpfx Aspyk Izocysd -Grooves: 7 pieces 22 mm -Dimensions: see photo -Total dimensions: 3410/1350/H665 mm -Weight: 4600 kg

Condition: excellent (used), CTS Type: C-40/1000 CTS climatic test chamber Condenser chiller air-cooled Control: 32 bit controller LCD control panel Digital display of setpoints and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for on-site test material control Temperature test: Temperature range: -40°C to +180°C Temperature change rate Heating speed 2.0 K/min Cooling rate 2.5 K/min Temperature deviation ± 0.1 to ± 0.3 K in time Heat radiation: approx. 2500 W at +20°C approx. 2500 W at ± 0°C approx. 1500 W at -20°C Climate Working range: Temperature range +10°C to +95°C Humidity range 10 to 98% r.h. Dew point range I +7 to +94°C Dew point range II -10 to +7°C Temperature deviation ± 0.1 to ± 0.3 K in time Humidity constancy I, temporal ± 0.5 to ± 1.5 % r.h. Humidity constancy II, temporal ± 1 to ± 3 % r.h. Panorama window 570 x 710 mm Test chamber dimensions Width 1000 mm Depth 1100 mm Height 900 mm External dimensions Width 1270 mm Depth 2220 mm Height 1950 mm Test chamber volume 1000 liters Tjdpfx Asru Dzuscysd Pipe feed-throughs, ø 50 Electrical connection: 400 V +6/-10% 3/N, PE 50 Hz Connected load: 8.4 kW Rated current: 12.4 A Refrigerant: R-404A Weight: 800 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.