Used Circular Vibrator for sale (3,734)

Condition: excellent (used), Year of construction: 2020, AKE Technologies Vehicle Shaker System Manufacturer: AKE Technologies GmbH Type: Vehicle Shaker System Year of Manufacture: 2020 For sale is a professional vehicle shaker system for vibration, resonance, and NVH (Noise, Vibration & Harshness) testing. The system is used to perform reproducible vibration and load tests on vehicles, assemblies, and components. The system enables the simulation of vehicle vibrations, road influences, resonances, and noise generation under controlled test conditions. Technical Data Operating voltage: 3 x 400 V AC / 50 Hz Control voltage: 24 V DC Power consumption: approx. 4 kW Compressed air supply: 6 bar Compressed air consumption: approx. 0.3 m³/min Total system weight: approx. 4,000 kg Stroke and positioning system: Approx. 1,000 kg load capacity per stroke table, according to documentation Shaker Data AKE HPS350 High-Power Shaker Frequency range: DC to 3,000 Hz Dynamic force: up to approx. 2.6 kN Static force: approx. 11 kN Stroke: approx. 5.5 mm peak-to-peak Max. velocity: approx. 0.74 m/s Max. acceleration: up to approx. 22 g Natural frequency: approx. 65 Hz Software Vibration Research VibrationVIEW AKE Drive File Manager Activated functions: 8 input channels Sine up to 4900 Hz Random up to 4900 Hz FDR up to 4900 Hz Sine Multichannel Random Multichannel Dual Loop Control Equipment Kedpfx Ajzazm Rohgsnb Industrial control cabinet with power electronics Operator computer High-power shaker units Vehicle wheel mounts Stroke and positioning units Lifting columns with crossbeam Measurement and sensor technology Operating and emergency stop units Application Areas NVH analyses Vibration tests Resonance investigations Noise analyses Component testing Endurance tests Research and development Condition Used system from industrial application. Optical condition, see pictures. Scope of delivery AKE Shaker System for Vehicles Control and operating system Industrial control cabinet Operator computer Installed test software High-power shaker units Vehicle wheel mounts Stroke and positioning units Lifting columns with crossbeam Measurement, control and connecting cables Documentation and software media Tools and accessories as shown in the pictures Condition Used system from industrial application. The system has been dismantled and stored. Optical condition as shown in the pictures. Scope of delivery as shown in the pictures. Important note: All information is provided to the best of our knowledge, based on available documentation, software displays and nameplates. Deviations in technical data are possible. Shipping or freight forwarding possible. Subject to change, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, all stainless steel nett width 450 mm length: 1.800 mm infeed height: 1.350 mm 400V, 50 Hz, 16A Knjdpfx Ahsz Az A Dogsb Grill opening: 2 mm dimensions (L x W x H) : ± 1.900 x 1.100 x 1.450 mm

Condition: excellent (used), Rotational speed: 2800 RPM Disc diameter: 300 mm Disc bore: 30 mm Disc thickness: 3.2 mm Motor: 1.5 kW Power supply: 230 V Kedpfx Aoz D A D Ishgonb Year of manufacture: 2006 CE marking

Condition: excellent (used), CATALOG NUMBER 6875 TECHNICAL SPECIFICATIONS - Infeed width: 720 mm - Infeed height: 160 mm - Maximum input material thickness: 160 mm - Shaft width: 720 mm - Shaft diameter: 600 mm - Knife length: 80 mm - Number of knives: 4×12 pcs - Screen size: 25 mm - Infeed pressure feed roller motor: 0.75 kW - Lower toothed feed roller motor: 1.8 kW - Upper toothed feed roller motor: 1.8 kW - Vibrating chute length: 4470 mm - Vibrating chute width: 710 mm - Vibrating chute motor: 2.2 kW Knjdezrm Uiopfx Ahgeb - Main motor: 55 kW - Autoreverse (with adjustable control) - Extraction nozzle diameter: 260 mm - Vibrating chute dimensions (L/W/H): 4470/950/930 mm - Machine dimensions (L/W/H): 3100/1500/1170 mm - Total weight: approx. 5500 kg – German manufacture – Very low hours – Original documentation – Used shredder, condition very good / excellent Net price: 139,900 PLN Net price: 33,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the event of significant exchange rate fluctuations, the price may be subject to change)

Condition: used, Year of construction: 1988, used in excellent condition low mileage cleaned functionally tested partially refurbished Manufacturer: Graule Type: AGT Year of manufacture: 1988 Machine No.: 05 Motor kW: 1.6 kW, 220 V Knsdozkvzpepfx Ahgjb Swivels to the right up to °: 45 Swivels to the left up to °: 45 Tilts up to °: 45 Machine base is mobile Cutting height mm approx.: 85 Cutting length mm approx.: 380 Blade diameter mm approx.: 300 Saw blade bore mm approx.: 30/40 Dust extraction connection mm: 80 Space requirement approx. L x W x H mm: 600 x 900 x 1000 Weight approx. kg: 50 Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty or guarantee.

Condition: used, Year of construction: 1987, Sawblade tiltable 45 ° Length of the rolling table 3200 mm Knodpovyuqrofx Ahgeb cutting width 1000 mm Motor output 5,5 kW weight of the machine ca. 1000 kg

Condition: excellent (used), Bargain in excellent condition: panel saw and spindle moulder with tooling Kedoy Ni Ayepfx Ahgjnb

Condition: used, functionality: fully functional, machine/vehicle number: 48979-76, saw blade diameter: 250 mm, type of input current: three-phase, input voltage: 380 V, SIMPLES METAL COLD CIRCULAR SAW – Ø 250 MM Professional stationary cold circular saw for precise cutting of metal profiles, tubes, and other metal workpieces. Knedpfx Aoz Dwzushgeb Technical specifications: Manufacturer: Simples Machine type: Metal cold circular saw Saw blade diameter: 250 mm Power supply: 380 V Motor: Two-speed motor Cooling system: Coolant pump Workpiece clamping: Mechanical vice Condition: Used, operational The machine features a robust industrial design and is suitable for use in metalworking workshops and production facilities. The actual condition, equipment, and signs of use are shown in the photographs. The machine can be inspected and tested by prior arrangement. Location: Gātciems, Latvia Loading assistance is available. Transport within Latvia and throughout Europe can be arranged. Internal reference number: 48979-76 Price: EUR 600 excluding VAT Price including 21% VAT: EUR 726 For eligible EU companies with a valid VAT number, a 0% VAT intra-Community sale may be possible.

Condition: excellent (used), Circular knife grinder MVM model LA500 Kedpfxez An R Ho Ahgenb

Condition: used, Model FSK Dimension of sliding table- 3000x330mm Gross cut capacity- 2700mm Width of cut between saw blade and rip fence - 1650mm Saw blade diameter - 400mm Scoring saw blade diameter - 120mm Height of cut - 125mm Speed levels 3 Tilting saw blade - 0-45º Saws lifting, up and down, mechanical control. Main motor - 5,5 kW Scoring motor - 1,1 kW With clamp Weight: 780 kg Transport dimensions - 3100x1300x1200mm Knsdoz Dt U Repfx Ahgeb Price 1500 Eur (EXW Jonava, Lithuania)

Condition: used, Year of construction: 2019, operating hours: 816 h, functionality: fully functional, saw blade diameter: 600 mm, - Single-head cutting saw for aluminum and PVC profiles - 600 mm cutting blade extending from below - Rotating table with a range of 20 - 90 - 20 degrees - Locking mechanisms for quick adjustment at standard angles Knsdpfx Asz Dq Tdjhgjb - Infinitely adjustable hydropneumatic feed system - Lowering guard for the cutting area - Two horizontal and two vertical clamping cylinders - Pneumatic cooling and lubrication system - Chip collection drawer - Chip extraction system - Two profile feed conveyors - Net price

Condition: new, Year of construction: 2026, saw blade diameter: 400 mm, – 400 mm saw blade – Double miter cut Knodpfsu Si Ndsx Ahgeb – 4 pneumatic clamps – Mist lubrication system – Air blow gun – Protective cover – Documentation – 400V

Condition: new, Year of construction: 2026, - Saw blade 400 mm Kodpogg N Axjfx Ahgsnb - Double mitre - 4 pneumatic clamps - Mist lubrication system - 300 cm roller conveyor with length stop - Blow gun - Protective cover - Documentation - 400V

Condition: good (used), Year of construction: 1987, Max. cutting length: 5.2 m Max. cutting width: 0.6 m Max. cutting height: 140 mm Ready for immediate use. The blades will be replaced with new ones. Knjdez Dnppopfx Ahgjb

Condition: good (used), Year of construction: 1995, max. cutting length 6200 mm max. cutting width 600 mm max. cutting height 170 mm motor 11 kW Knsdpexiu Dtefx Ahgsb

Condition: used, Circular shears with motor drive FASTI Type 502 - 10 - 2 Machine no. No. 9252 009 Year of construction 1992 Material thickness max. 2 mm (400N/mm²) Maximum circular blank diameter 1000 mm Minimum blank diameter 100 mm Cutting shaft speed 60 and 120 rpm Cutting speed 12 and 24 m/min. Blade holder Ø 20 mm Knife diameter Ø 65 mm Projection of the clamping plate 720 mm Projection of the cutting wheel 280 mm Motor power 1.1 / 1.4 kW Mains connection 380 Volt, 50 Hz - 2 motor speeds - Mechanical clamping tip - Scale on the clamping bracket Knjdpfsu Rimmjx Ahgsb - electric foot switch - 1 set of cutting blades - Operating instructions with electrical diagram in PDF format Space requirement L x W x H 1600 x 660 x 1350 mm weight 320 kg good condition

Year of construction: 2004, condition: used, Weight: 4.7t, automatic system operating hours: 41,411h, feed operating hours: 14,251h, an on-site inspection is possible. Kjdpfx Ahoz Da Nzjgsnb

Year of construction: 2021, operating hours: 808 h, condition: ready for operation (used), functionality: fully functional, For sale is a vibration tunnel manufactured according to a custom design, intended for continuous transport and irradiation of bulk materials and other products suitable for vibration transport. The device was made to order, and its design was created with a specific technological process in mind. The entire unit is made of acid-resistant steel. The tunnel is equipped with 20 Philips TUV lamps, each with a power of 75 W, placed above the transport surface. During operation, the product is continuously transported through the tunnel and simultaneously exposed to UV-C radiation. 1. UV-C Application The UV-C system can be used for surface irradiation of products to reduce the number of microorganisms. Originally, the device was designed for use, among other things, for: • seed material, • grains, • herbs, • vegetables, • other suitable bulk products. The effectiveness of the UV-C process depends on factors such as the type of product, its properties, the thickness of the layer, and the exposure time. The possibility and effectiveness of using the device should be verified each time for a specific product and technological process. 2. Adaptability to Other Applications A significant advantage of the device is its individually designed, modular construction, which allows for further adaptation to the user's needs. After removing or modifying the UV-C system, the structure can be used as: • a vibration conveyor for bulk materials, • a vibration feeder, • a dispenser, • a device for evenly distributing the product, • an element of a process line that feeds the product to the next stage of the process, • a vibration screener – after using appropriate screens, • a device for transporting seeds, grains, spices, herbs, granules, and other materials such as pellets, frozen, and fresh vegetables and fruits suitable for vibration transport. The construction can serve as a basis for further individual adaptation according to the requirements of a specific production process. 3. Construction The device is entirely made of acid-resistant steel, using two Italvibra vibration motors and Rosta suspensions. Philips TUV lamps, each with a power of 75 W, are located above the transport surface. Shatterproof lamp covers have been used to increase safety in a production environment. The construction provides access to the working elements and allows for further modifications to the device depending on the planned application. 4. Device Condition Upon request, we can provide additional photos, videos, technical information, and discuss the possibilities of adapting the device to a specific application. 5. Technical Specifications Parameter Data Type of device UV-C vibration tunnel Design Custom design / made to order Construction Acid-resistant steel Tunnel length 420 CM Knodoz A Tgwopfx Ahgsb UV-C lamps 20 × Philips TUV Lamp power 75 W Total UV-C lamp power 1500 W Product transport Vibration conveyor Vibration motors 2 × Italvibra Power adjustment Yes – adjustment of vibration force Suspension Rosta Operating mode Continuous operation Discharge Directly into a bag Overall dimensions 420 X 115 X120 Weight 400 KG Power supply 380V

Condition: new, power: 7.5 kW (10.20 HP), Equipment: scorer, Net price: €10,500 - Scorer - Saw blade tilt and height adjustment are manual - Cutting height 200mm - Scoring device with separate drive motor - Main saw blade with belt drive and speeds 2800/3665/4800 min¯¹ - High dead weight ensures vibration-free operation - Large extension table with material roller - Parallel fence with round bar guide - Extendable aluminum longitudinal fence with two folding stops - 7.5 kW powerful main motor mounted on a robust cast iron frame - Four-times-cushioned sliding table made of anodized aluminum with high torsional rigidity Kodpfx Ajwf Ndcehgenb - Multiple locking on sliding table - Standard with table extension and table extension made of thick plate - Large swing guard hood easily swivels up using a gas spring - Saw blade clamping via tool-free rapid system + Extraction connection Extraction port diameter: 120mm Extraction port diameter for saw guard: 80mm + Electrical data Connection voltage: 400V Mains frequency: 50Hz Nominal power consumption: 8.3kW Output power: 7.5kW + Sliding table and table Sliding table length: 3200mm Sliding table height: 890mm Table height: 890mm + Circular saw unit Cutting width with parallel fence: 1450mm Max. cross-cutting width left of saw blade: 3200mm Saw blade tilt: 90 – 45° Max. cutting height 90°: 200mm Max. cutting height 45°: 140mm Saw blade diameter: 550mm

Condition: used, Year of construction: 2023, Bread slicing machine, circular blade, MHS Ideal L Year of manufacture: 2023 Condition: used Suitable for all types of bread Slice thickness can be freely selected in 1 mm increments 3 additional memory buttons, freely programmable Function for halving and half-slicing Bread passage (L x H x D): 45 x 16 x 36 cm Ksdpjz A St Nofx Ahgjnb Cutting thickness (in mm): 4 – 24 Connection value: 230V Cutting capacity (slices/min.): 100 Blade type: circular blade, 260 mm Tabletop machine including mobile base

Condition: good (used), Year of construction: 1992, Panel saw with strip curtain max. cutting length 4200 mm max. cutting width approximately 1000 mm Knodpfjzq Rh Dex Ahgsb Motor 11 kW with electric width adjustment and digital display for width stop new strips will be supplied available at the location in working condition

Condition: new, Year of construction: 2025, functionality: fully functional, The weighing system is also designed for mixing up to 4 products. Each of the 4 units can be programmed individually. The system can be tested at our test center, 20 km from Frankfurt am Main. Features Knjdjya Ahvopfx Ahgob - Easy operation and cleaning - Convenient control via color touchscreen - Memory for various weighing recipes - Precise weighing results thanks to three-stage weighing: coarse/intermediate/fine dosing, each programmable individually - Tool-free format changeover Technical data - Weighing range: 20g to 4000g - Accuracy: up to 0.5g, depending on product - 6-liter weighing hopper - Max. speed: 60 weighing cycles/minute - Weight: 240kg - Material: stainless steel 304 - Connection: 220V / 50Hz / 6A

Year of construction: 2026, condition: new, 1800 mm diameter vibrating sieve with two SUS304 stainless steel decks Knjdpfxezzkpve Ahgob vibrating motor 3 kW, 1460 rpm, 400 V, 50 Hz Mesh size of choice

Year of construction: 2018, condition: like new (used), functionality: fully functional, WALTER TD500 KBA Circular Saw | Year 2018 | CE | After Inspection | Very Good Condition | KALISZ WALTER TD500 KBA circular saw – a robust and efficient machine designed for longitudinal trimming of round timber. The unit is in very good technical condition, has undergone inspection, and is ready for operation. This machine is ideal for sawmills and wood processing plants, providing high performance and precise cutting. TECHNICAL SPECIFICATIONS: - Manufacturer: WALTER - Model: TD500 KBA - Year of manufacture: 2018 - Condition: very good - After technical inspection - CE certificate - Operating manual included - Infeed table: 6 m (3 m standard + 3 m extension) - Main motor power: 22 kW or 30 kW - Feed motor: 1.5 kW - Length of infeed table: 6000 mm - Maximum log diameter: 350 mm - Minimum log diameter: 60 mm - Adjustable feed speed via frequency inverter - Feed speed range: 0–25 m/min - Two rows of pawls - Saw blade diameter: 500 mm - Spindle diameter: 70 mm - Spindle support - Chip conveyor - Three receiving rollers - Suction ports: 2 × 200 mm Machine advantages: - Renowned manufacturer WALTER - Very good technical condition - After inspection – ready for operation - Long, 6-meter infeed table - Smooth feed speed adjustment via frequency inverter - High performance and durable construction - Where can you view our machines? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE Lublin Voivodeship Ksdpfez A Aytox Ahgsnb It is possible to test the machine on site. Financing options are available through leasing or installments. WE ORGANIZE TRANSPORT.

Condition: used, Rema circular saw with carriage Main motor: 5.5 kW 3 cutting speeds Scoring saw: 0.75 kW Saw blade adjustable up/down and at an angle of 0-45 degrees Knodpfx Ahoz A Al Nsgjb Max. blade diameter: 400 mm Used machine, still in good working condition.