Used Circular Grinding Machine for sale (65,155)

Condition: new, Year of construction: 2024, Grinding wheel DxB 455 x 255 mm workpiece diameter 1-60 mm, control disc DxB 255 x 255 mm, disc speed 10-100 rpm, power SS 11 kW, weight approx. to 3.7, size approx. 2,700 x 1,700 mm Njdpfx Aodlgq Ushvowd Machine is suitable to the pass and feed grinding, hardened and ground Guide pave grinding and control spindle with hydrodynamsicher three-point bearing, lubrication for carriage and delivery spindles, rule discs powered by DS engine, frequency controlled, hydraulic dressing equipment for grinding and rule disc. Equipment of electrical, predominantly with Siemens components, electrical cabinet in Germany built up, GC 1810-NC stepper motor with Siemens S7 control for grooving and extra movement. Very economic price / performance ratio

Condition: good (used), - All rubber rollers new or as good as new - Belt length 3000 mm Nodpfx Ajulvipjhvjwd - Year of manufacture - Price On request

Condition: good (used), Year of construction: 2005, operating hours: 374 h, functionality: fully functional, machine/vehicle number: 112434, total length: 7,310 mm, total width: 1,800 mm, total height: 2,300 mm, overall weight: 4,200 kg, input frequency: 50 Hz, type of input current: three-phase, working height: 80 mm, power: 20 kW (27.19 HP), pressure: 7 bar, Straight line bevelling machine for glass with 7 wheels, serviced in 2025. Minimum glass size: 40 x 40 mm. Speed: 0.5 – 4.1 m/min. Glass thickness: 3 – 20 mm. Bevel angle: 3° – 45°. Maximum bevel width: 50 mm. Power: 20 kW. Excluding water tanks and pump (connected to central system). Nodpfoyg Dhqsx Ahvswd

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 942, total length: 9,170 mm, total width: 1,635 mm, total height: 3,100 mm, overall weight: 4,140 kg, input current: 44 A, input frequency: 50 Hz, type of input current: three-phase, input voltage: 400 V, power: 21 kW (28.55 HP), workpiece weight (max.): 800 kg, pressure: 7 bar, Lattuada TL10 AV C straight line edger mitring 0-45°, cerium. Refurbished at our warehouse in Belgium. Tested and ready to go. Nwsdpew U Nzrjfx Ahved

Condition: good (used), Cup wheel diameter: 175 mm Table clamping surface: 150 x 250 mm Max. installation height without/with magnetic chuck: 250/150 mm Grinding area: 100 x 360 or 150 x 190 mm Grinding spindle speed: 2800 rpm Drive motor: 380 V, 1.5 kW Required space approx.: 800 x 600 x 1600 mm Nwsdpfx Aeyvfq Eshved Weight approx.: 200 kg

Year of construction: 1999, condition: ready for operation (used), Grinding dimensions X/Y: 600mm/305mm, max. workpiece height: 350mm, feed rate X: 24m/min, feed rate Y/Z: 2m/min, machine dimensions X/Y/Z: approx. 3000mm/2700mm/2500mm, weight: approx. 3200kg, control: Siemens Sinumerik. The control has a circuit board defect. Documentation vorhanden. An inspection on site is possible. Nedpfxsywy Rqj Ahvjwd

Condition: ready for operation (used), Contact Belt Grinder LÖSER KS 360 for grinding pipes / round material Nodoywy Ddopfx Ahvswd - Abrasive belt length: 2500 mm - Abrasive belt width: 5 - 75 mm - Material grinding length: endless - Grinding range / diameter: 3 - 70 mm - Belt speed: 7.5 - 34 m/s - Contact wheel diameter: 100 - 225 mm - Motor power: 1.6 / 2.6 kW Dimensions (LxWxH): 1.2 x 0.6 x 1.8 meters / Weight: 350 kg Subject to errors and omissions.

Condition: used, functionality: fully functional, Guideway and surface grinding machine WMW FRITZ HECKERT type SZ 1600 x 1000 x 5000 /4 nominal grinding area 5000 x 2200 mm table clamping area 5000 x 1600 mm grinding length max. 5000 mm Machining width 2200 mm Machining height 1250 mm grinding wheel diameter (surface grinding support) max. 600 mm grinding wheel width (flat grinding support) max. 100 mm grinding wheel diameter (swivel support) max. 450 mm Nwodpfxeywyzve Ahvjd Mains connection 400 Volt, 50 Hz - grinding support swiveling, drive power 16,5 kW, infinitely variable speed - grinding support for surface grinding, drive power 15 kW, infinitely variable speed - new electrical control, based on CNC SIEMENS 840D - new electric control cabinet - infinitely variable grinding wheel speed at both grinding supports - swiveling wheelhead for guideway and profile grinding - swivel-mounted and height-adjustable control panel - coolant system - oil circulation lubrication - Various grinding wheels and holders

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, single double edging machine with 12 cup wheels on each side max. glass size is 2600 mm min. glass size is 170 mm machine sizes : L x W : 7700 x 4500 mm Nwjdeywyvmjpfx Ahved

Condition: ready for operation (used), Specifications Njdpfxsv Iaqgs Ahvjwd Manufacturer NILES Model ZSTZ 08 CNC Condition Used Stock Number in fabbrica Max diameter 800 mm Max module 14 Min-max number of teeth 5-315 Machine weight 14500 kg Machine dimensions 6000x3500x2800 mm min-max grinding wheel revolution 100-1250 rpm Description Equipped with New electrical system

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, 10 cup wheels vertical glass edging machine with a Schraml CLEAR Aquatec water centrifuge miter angle : 0-45° speed : 0,35 - 5,4 m/min. Nwodpfx Ahoywykwevjd arris width : 5 mm min. glass size 3-12 mm : 65 x 65 mm from 12-30 mm : 100 x 100 mm glass thikness : 3 - 30 mm electric power : 31 Kw 72A 400 V 50 Hz machine dimensions ; LxWxH(mm) 8400 x 1250 x 2900 mm

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 2020.12.171, total width: 3,590 mm, total height: 2,910 mm, total length: 2,210 mm, grinding width: 2,600 mm, grinding belt speed: 2,400 mm/s, grinding belt length: 3,250 mm, workpiece height (max.): 80 mm, grinding belt width: 2,650 mm, air demand: 192 m³/h, Heesemann KSA 8 Wide Belt Sander 2600mm Width The sander consists of: 1. Frame Structure For mounting the transport bed, with attachment points for 1 sanding unit and 1 brushing unit. 2. Transport Bed Individual conveyor belts with feed speed adjustable from 5 to 25 m/min, controlled by frequency converter, constant working height of 920 mm. Adjustment to workpiece thickness (3 to 80 mm) by height adjustment of the entire machine top, including monitoring of the toothed belt for the lifting gear at a lifting speed of 3 mm/s, and integrated control cabinets. 3. Industrial PC 21.5" Capacitive multitouch color display, 1,920 x 1,020 pixel resolution, CF card, Windows Embedded Standard operating system, with production data acquisition (display of production and downtime). Ethernet connection available. Program memory for 1,000 programs. Motor speed values are stored and automatically set after program selection. 4. Profinet interface for higher-level control Nwjdpfxoywuqre Ahvsd 5. Longitudinal sanding unit with contact roller for calibration (steel) Balancing quality Q 1 (finely balanced) according to VDI 2060, driven by poly-V belt, maintenance-free bearings. Diameter: 350 mm Abrasive belt dimensions: 3,250 x 2,650 mm Belt speeds: 1-24 m/s Drive power: 37 kW via frequency inverter Stepless adjustment of sanding belt speeds, wear-free brake device, intermittent belt blow-off device, automatic infrared belt control, sanding belt operates against feed direction, manual grit compensation Infeed: segmented, pneumatically controlled pressure bar Outfeed: continuous, pneumatically controlled pressure bar 6. Brush roller unit Central height adjustment, includes extraction hood and pressure roller. Brush material: horsehair Diameter: 250 mm Drive power: 5.5 kW 7. Workpiece vacuum clamping system For safe transport of workpieces shorter than 750 mm in feed direction, with integrated fan. Operating voltage: 400V, 50 Hz Machine paintwork: Internal: light grey, RAL 7035 External: light grey, RAL 7035 Doors: anthracite, RAL 7016 Brush insertion side: left Terminal: front left 8. Ionizing bar, from above For dissipation of static charge, including high-voltage transformer 9. Workpiece blow-off device with rotating compressed air nozzles, at machine outfeed, including extraction hood General specifications of the sander: Sanding width: 2,600 mm Working height: 920 mm Maximum workpiece thickness: 3 to 80 mm Dust extraction: Required air speed, minimum 20 m/s Much higher extraction speeds may result in functional disadvantages. Machine underpressure approx. 1000 Pa Air requirements for: - 1 longitudinal sanding unit, roller diameter 350 (socket 1 x diameter 330) 103.0 m³/min - 1 brushing unit, diameter 250 (socket 1 x diameter 206) 38.0 m³/min - Workpiece blow-off (2 sockets x diameter 120) 28.0 m³/min - Conveyor belt blow-off (socket 1 x diameter 160) 24.5 m³/min - Exhaust air from fan for workpiece vacuum clamping system (socket 1 x diameter 180) 30.5 m³/min Total air requirement: 224.0 m³/min

Condition: new, Year of construction: 2026, A universal belt grinding machine for rough grinding and metal buffing. Suitable for various shapes and materials. The machine is by default equipped with a suction connector for extraction. 75×2000 mm grinding belt, powerful 3 kW motor. SM 75 model is additionally equipped with 2 belt speeds: 14,5 and 29 m/s. 2 rubberised wheels ensure good grip of the grinding belt. Machine features Universal area of application for edges, surfaces and round grinding Graphite coating on the surface for grinding surfaces increases the grinding belt's slippage Spring device ensures constant belt tension Easy and quick belt replacement Optimum grinding efficiency due to the high speed of the belt Can be quickly adjusted to horizontal or inclined grinding Universal area of application in iron working shops and industrial areas Large grinding surface with a protection guard Equipped with an additional precise adjustment of the belt inclination angle By default equipped with 2 belt speeds Technical data Wheel contact surface (H×W) 250×150 mm Njdpevu Uh Tsfx Ahvewd Grinding belt dimensions (L×W) 2000×75 mm Belt speed 14,5/29m/s Motor power 3 kW Weight 72 kg Dimensions (L×W×H) 1070 x 560 x 980 mm Warranty 12 months

Condition: good (used), Jones and Shipman Suprema 650 M Easy Universal OD/ID Cylindrical Grinder s/n SO19131, w/ J&S PLC Control, 12" Swing x 25" Centers, Swivel Wheelhead w/ OD & ID Capability, Internal Spindle, Hydromation Coolant System, Heidenhain DRO, Workholding NOT Included Nwsdpfoywfyqex Ahvjd

Condition: excellent (used), Year of construction: 2003, 2003 Mitsubishi CNC Shaving Gear cutter grinder Model ZA30CNC, Year 2003, With Fanuc Series 16i-M HMI, Includes Nwedpfxsywftkj Ahvjd FN-0013 Dust Collector, Power 200/220 Volts / 3 Phase , Weight 15000 Lbs.

Condition: used, Year of construction: 2001, 2001 Kellenberger CNC Grinder KEL-VARIA RS175/1000 Njdpfxoywftds Ahvjwd

Condition: used, Year of construction: 1990, grinding diameter 200 mm grinding length 340 mm Nodpfxoywnt Ho Ahvewd centre height 100 mm Control CNC 25 kVA voltage 110 / 220 / 3x165 / 3x380 VAC control voltage 24 VDC

Condition: used, Year of construction: 2004, grinding diameter 250 mm grinding length 650 mm centre height 125 mm Maschine wird mit Wartung und neuer Geometrie verkauft Betriebsstunden bisher 12260 Reitstock mit Feinverstellung Nsdpoywntyjfx Ahvjwd Schleifspindelstock schwenkbar mit 5° Hirtverzahnung Papierbandfilter Marposs Messeinrichtung Innenschleifeinrichtung

Condition: used, Year of construction: 1992, grinding length 0800 mm grinding width 500 mm workpiece height 400 mm table-size 800 x 400 mm table speeds 1 - 25 m/min cross feed autom. 0 - 60 mm/Hub grinding wheel size 400 x 100 x 127 mm grinding spindle speed 1400/2800 U/min total power requirement 10 kW voltage 380 V weight of the machine ca. 6 t Nsdpewgnz Aefx Ahvowd Machine has cooling arrangement, auto. vert. feed, dressing arrangement and wheel flanges.

Condition: used, Jung F 50 Surface Grinding Machine Condition: Used Technical Data Grinding Length: 500 mm Nwodjyuy Euepfx Ahved Grinding Width: 200 mm Grinding Height to Spindle Center: 285 mm Table Size: 700 x 200 mm Spindle Speed: approx. 3000 rpm Grinding Wheel: 225 x 20 x 51 mm Feed: manual via handwheel Rapid Traverse Wheel Dressing Device Dimensions (L / W / H): approx. 1850 mm / 1300 mm / 1750 mm Weight: approx. 1400 kg

Condition: used, Year of construction: 2001, functionality: unexamined, grinding length: 800 mm, grinding width: 600 mm, grinding height: 400 mm, grinding wheel diameter: 400 mm, grinding wheel width: 100 mm, grinding spindle motor power: 20,000 W, Used surface grinding machine and profile grinding machine, year of manufacture 2001, partially overhauled in 2019, ELB-SCHLIFF model PERFEKT-FUTURE BD 8 -F- Schleicher-Unicon CNC Nwedpfoywk Akox Ahvjd Electro-magnetic clamping plate 500 x 300 x 4 mm, new pole pitch in 2019 Coolant system featuring combination of permanent magnet and paper band filter Adjustable coolant supply nozzle Grinding wheel flange

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 457 mm, travel distance Y-axis: 171 mm, travel distance Z-axis: 504 mm, spindle speed (max.): 2,640 rpm, Equipment: CE marking, documentation/manual, Tangential Surface Grinder J.S 540 X Workable Surface Area: 457 x 152 mm Vertical Travel: 504 mm Standard Grinding Wheel Size: 200x20x31.75 mm Grinding Wheel Speed: 2640 RPM Nwodpfxeyuwvks Ahvsd Operation and Maintenance Manuals CE Declaration Tank with Paper Filtration

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 208901, grinding length: 2,040 mm, grinding width: 700 mm, total height: 2,600 mm, total length: 6,000 mm, total width: 2,900 mm, distance table to spindle center: 600 mm, table load: 1,300 kg, overall weight: 7,500 kg, SAEILO KENT KGS-715 WM 2 Surface Grinding Machine Nsdpfx Ahsyuvvcjvswd - Operating voltage: 400 V - Frequency: 50 Hz - Connection: 12.3 kW - Minimum distance from table to spindle center: 120 mm - Separate hydraulic unit to prevent thermal changes in the machine - Infinitely variable longitudinal and cross table motion with automatic table reversal - Rapid vertical adjustment for the grinding head: 300 mm/min (rapid traverse) - Electronic handwheel for precise manual vertical and crossfeed - Adjustable magnetic chuck with clamping force monitoring - Magnetic chuck dimensions: 1500 x 720 mm - Automatic central lubrication with visual inspection - Side chip and splash guards - Grinding wheel dimensions: 355 x 50.8 x 127 mm - Highly precise positioning (cross axis reversal accuracy of 0.02 mm via servo motor) - Including matching workshop cabinet with various grinding wheels Attention: The item must be collected definitively between 05 and 07 May 2026 on a date yet to be agreed. FCA D-74385 Pleidelsheim – loaded onto truck

Condition: good (used), Cup wheel - diameter: 175 mm Spindle projection: 180 mm Nwsdpfx Aec Skfbohvjd Operating voltage: 400 V Machine weight approx.: 300 kg Space requirement approx.: 0.90 x 0.60 x 1,80 m

Year of construction: 1987, condition: good (used), Reform SPW 30 CNC high performance grinding machine (roll grinding machine) Machine number: 3728-87 Year of manufacture: 1987 grinding length 2.000 mm Nodpfx Ahsbq A Hujvewd