Used Chop Saw Miter Saw for sale (5,582)

Condition: used, Year of construction: 2004, cutting width max. 700 mm Cutting height max. 120 mm saw-blade dia. max. 700 mm Hnjdox Eblvjpfx Ag Iel

Condition: used, Year of construction: 2022, Cutting height 260 mm sawing motor 7,5 kW saw-blade dia. 500 mm Hnsdpfx Agjx Ditfe Iol feed max. 250 m/min

Condition: excellent (used), length ca. 3.200 mm Hnedpoxwbpfsfx Ag Ijl width ca. 1.400 mm height ca, 1.600 mm Motors 2 table - swivable Ja The stable Bäuerle KFL combined woodworking machine combines a sliding table saw, slot drilling machine, and table router with feed in one machine and comes with a wide range of accessories. Roller table: yes

Condition: used, cutting width max. ca. 600 mm Cutting height max. ca. 120 mm feed pneumatisch m/min Hnsdpfoxrtzpex Ag Ijl

Condition: used, Speed: 2,700 rpm Motor: 0.24 kW Hnsdow Uz Rrepfx Ag Iel Saw unit including cable and switch.

Condition: used, Cutting height max. ca. 100 mm Hnjdpfow Ng T Uox Ag Iel Chain width 300 mm Motor output 45 kW

Condition: used, cutting length ca. 2.200 mm mitre angle 45° - 90° workpiece max. 50 x 70 mm Hsdpfsw D Dfxex Ag Ijnl

Condition: used, engine 3 KW cutting width tba mm roller table nein ja/nein Hsdpewzbcvsfx Ag Ionl Three-function combined table saw, slot drilling, and milling machine Kirchner Leipzig. Without milling arbor.

Condition: used, Bore: 70 mm Width: 6.0 mm Hnjdpfx Agowrrdrs Ijl Diameter: 250 mm Blades: 20 + 2 Circular saw blade or grooving saw in very good used or near-new condition.

Condition: used, cutting width 380 mm Hsdpfxswqphlj Ag Isnl Cutting height 85/40 mm machine weight ab. 50 kg Combined pull-through and table saw Graule AGT. The pull-through saw can be tilted and swiveled. The machine can also be used as a pull-through saw only by removing the table.

Condition: used, Bore: 30 mm Width: 3.5/4.8 mm Cutting circle (ø): 500 mm Hjdowcpnpspfx Ag Ionl Material: steel Blades: HW WZ Z144

Condition: used, band length ca. 1.700 mm + 2.700 mm Hjdpfx Agsv Hgb Nj Isnl cutting width max. 2.500 mm Cutting height max. ca. 80 mm

Condition: used, length ~ 600 mm Hnjdoulfftjpfx Ag Isl width ~ 700 mm height ~ 1.000 mm saw-blade dia. max. ~ 300 mm Sharpening machine cut-off saw for sharpening small circular saw blades.

Condition: used, Bore: 30 mm Hnsdpfx Ajtddxvsg Iol Width: 3.8 mm Blade diameter (ø): 500 mm Material: Steel Blade: HW Z72

Condition: used, Bore: 30 mm Width: 3.7 mm Hnsdpfx Aotddxreg Ijl Cutting circle (ø): 494 mm Material: Steel Blade: HW WZ Z72

Condition: used, Bore: 30 mm Width: 5.2/3.2 mm Hnodpfx Agsrucqcs Ijl Cutting circle (ø): 500 mm Hole spacing: approx. 60 / 63 mm Material: steel Blade: HW WZ Z120

Condition: used, Year of construction: 2000, Used machine Year of manufacture: 2000 Features and technical data: - Equipped with electric height and tilt adjustment for the main saw blade, dimension input via keypad - Digital display for tilt angle and cutting height - CE version - Cutting length: 3000 mm - With center and end position locking - Cutting width: 1300 mm - Fine adjustment on parallel fence - Saw blade diameter max. 450 mm - Motor: 5.5 kW with 4 speeds (3000/4000/5000/6000 rpm), manually adjustable - With automatic brake and digital speed display - 2-axis scorer with electric height and lateral adjustment - RAPIDO scoring system - DUPLEX double-sided mitre fence Hnodpfxsy Siz Ie Ag Ijl Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 2021, Used machine Year of manufacture: 2021 Cutting length: 5300 mm Cutting height: 2200 mm Vertical panel saw for cutting sheet-type wood materials such as chipboard, MDF panels, veneer panels, multiplex, etc. Base machine Completely welded frame with extremely high rigidity Precise guidance of the saw beam / saw unit for accurate cutting. Automatic feed for vertical and horizontal cuts. Cutting depth: max. 60 mm Saw beam Sturdy saw beam guided on precision rails. Pneumatic latching of the saw beam in the upper and lower positions. Electric monitoring during vertical cuts Saw unit Smooth and ergonomic operation for plunging and retracting the saw unit. Plunge lever can be folded down from the upper position for precise entry. Generously dimensioned levers for easy swiveling. Housing cover opens the complete saw unit for easy tool changes, including ProLock quick-release chuck. View opening: riving knife can be retracted Automatic functions Automatic plunge, cut-through, retract, and stop or Automatic plunge, cut-through, retract, and return Shortened return travel (selector switch) The shortened return travel of the saw beam prevents unnecessary travel paths of the saw unit (short workpiece positioned on the right) Speed control: infinitely variable from 6 - 24 m/min Cutting depth: max. 60 mm Control panel Efficient operation of the machine. Ergonomically mounted at eye level. Lower workpiece support Stable, wear-free stainless steel support. Support up to the cutting line: narrow workpieces cannot tip or fall through. Extraction Effective extraction with two ports: saw unit Ø 120 mm, frame end Ø 100 mm (for TRK version) Lifting roller transport system: Manually raiseable and lowerable rollers for easy and gentle panel transport. Hsdpfx Agjyuld Aj Ijnl Measuring tape For dimension display in horizontal cutting with three manual measurement displays: Absolute measurement from the lower workpiece support Absolute measurement from the middle workpiece support Series cuts from the top edge of the panel Powerpackage The package consists of the following options: 1. TRK extraction system 2. SuperCut scorer 3. Vertical digital display 4. Stepless speed regulation Saw unit 7.0 kW, 1100–5500 rpm, 400 V, 50 Hz Incl. HW circular saw blade Ø 250 x 30 x 3.2 mm, Z 48, hollow-flat tooth TRK system according to CE guidelines SH 2200 (less than 2 mg fine dust/m³ of air) – mandatory for all CE-required countries (extraction system provided by customer) Pneumatic shifting grid Continuous shifting grid over the entire machine length for stable workpiece support. Automatically, pneumatically retracts during horizontal cuts. Prevents the shifting grid from being cut during horizontal cuts. Digital measurement display for horizontal cutting on the control panel Incl. electric fine adjustment Display of: Absolute measurement from the lower workpiece support OFF-Set measurement from the middle workpiece support Series cuts from the top edge of the panel Saw blade compensation (saw blade thickness can be individually programmed) If the unit is operated via the brake at the ba... (text cut off)

Condition: excellent (used), functionality: fully functional, Panel Saw Minimax SC3W Carriage length: 1600 mm Hnodpfx Agjy Sg Tno Isl Manual saw blade height adjustment Manual saw blade angle adjustment Maximum blade diameter: 315 mm

Condition: good (used), functionality: fully functional, Crosscut Saw OMEC TA185 Maximum cutting height: 180 mm Maximum cutting width: 900 mm Saw blade diameter: 550 mm Pneumatic material clamping Pneumatic saw feed Hedpfx Agey Sff Ne Isnl Saw operated via two-button control Main motor power: 7.5 kW Machine dimensions: 492x145x120 cm (H) Weight: 600 kg

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Features and technical data: Hnodpfxoxvnpcs Ag Iol - Cutting length: 4300 mm - Vertical cutting height: 2150 mm, horizontal cutting height: 2100 mm - Maximum cutting depth: 60 mm - Saw blade diameter: 250 mm; bore: 30 mm - Motor: 4 kW - Speed: 5100 rpm - Material support with rollers - Fixed support elements for secure positioning of workpieces - Middle support: stable support elements at working height, individually manually foldable - Measurement reading for: - horizontal saw cuts via scale - horizontal saw cuts via strip stop from 50–500 mm - vertical saw cuts via stop from 0–1300 mm - Air connection for pneumatically retractable slatted frame (required air pressure: 6 bar) - Scoring system: by double cut of the main saw blade; the plunge depth of the saw blade is limited simply by adjusting a stop, so the saw blade scores the workpiece in the direction of feed Availability: short term Location: Röllbach

Condition: used, Year of construction: 2007, Used machine Year of manufacture: 2007 Equipment and technical data Cutting length: 5300 mm Cutting height: 2200 mm (edging height 2110 mm) Cutting depth: max. 60 mm Extraction system: - Saw unit: 120 mm - Frame end: 100 mm Workpiece support: - Stable plastic support for optimal stability, also suitable for narrow workpieces. - Chips are removed via diagonal slots. Roller transport system: Manual for easy and gentle material handling Indexing: Manual, vertical and horizontal Feed: Manual, vertical and horizontal Saw blade: Carbide (HM), 250 mm, hollow ground, 48 teeth Saw motor: 4 kW at 5450 rpm, 400 V, 50 Hz Folding rail: incl. workpiece support for narrow parts (5 positions) with strip stop with Supercut scoring unit Extraction system according to BG guidelines TRK (below 2 mg fine dust / m³ air) Hsdpfxsy Scl Te Ag Ijnl Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 2011, cutting diameter 335 mm saw band length 4400 x 34 x 1,1 mm table height 750 mm 550 mm 335 mm 550 x 335 mm 330 mm cutting speed 320 x 335 mm down speed 200 mm Hnjdpfoy Sbkhex Ag Iol dimensions of saw-band 200 x 335 mm workpiece weight 15 - 150 m/min 3,0 kW work height max. 1500 kg connected load 2400 x 2200 x 1900 mm Equipment: - Automatic feed unit - Material end Light barrier - Clamping pressure regulation for automatic machines - Manual saw blade tension - Laser light for cutting line display/scoring saws - Water spray gun

Condition: used, FORMAT 4 Kappa V60 Panel Saw - used - Welded frame with extremely high rigidity, automatically retracting support slats, stable locking of the saw carriage at top and bottom, control panel at eye level, digital readout on the longitudinal stop, digital display for horizontal cuts, Hedpey Sazrjfx Ag Ienl strip cutting device, lift-roller transport system, edgable support surface, dust extraction unit TRK, dust-tested ----- Technical Data ----- Cutting length: 4,300 mm, Cutting height: 2,200 mm, Cutting depth: 60 mm, Saw blade Ø: 250 mm, Motor: 3 kW, Extraction port Ø: 2x 100 mm, Space requirement (LxWxH): 5,600 x 1,700 x 3,000 mm

Condition: excellent (used), GSA 1100 E Professional reciprocating saw - Machine inspected - 1100 watts Hodpoy R U Svjfx Ag Ionl