Used Chipper Shredder for sale (1,157)

Condition: used, Year of construction: 2006, operating hours: 3,000 h, functionality: unexamined, machine/vehicle number: 49291, rotor diameter: 890 mm, rotor length: 1,500 mm, power: 400 kW (543.85 HP), type of input current: three-phase, input voltage: 400 V, An industrial shredder manufactured by ELDAN Recycling A/S, based in Faaborg, Denmark, is available for purchase. This equipment is designed for size reduction of light waste streams, electronic scrap, and non-ferrous metals. -Rotor Mechanism and Cutting Components The processing mechanism consists of a rotor housing containing a main shaft equipped with 18 guide plates and 2 end plates, which are secured by keys. The machine features 36 vertical-flex ring hammers distributed across 4 secondary shafts, providing 2 rings per main guide plate. When the rotor spins, centrifugal force drives these rings into an outward position. When feed material is introduced, the rings dynamically retract between the rotor plates to absorb impact, returning to their outward position once the material passes. The drive torque is transferred smoothly to the shredder via a hydraulic coupling to effectively handle shock loads. -Material Applications and Feed Capabilities The Shredder Type S1500 is engineered to process light waste materials, including: Bodpfx Alezqywhs Rjwr Telecommunication equipment scrap Electronic waste and WEEE Sheet metal, turnings, and general metal scrap Aluminum parts The maximum dimensions for input material are approximately 1000 mm in length, or a maximum surface area of 600 x 600 mm for sheet metal with a thickness of 2 mm. These feed dimensions apply when the machine is operated with screen grates measuring 40 x 105 mm or 25 x 105 mm. Using smaller screen sizes requires a reduction in feed volume to prevent equipment overload. -Maintenance and Accessibility Features The shredder housing is split into an upper and lower section connected by standard bolt configurations. The upper section and the attached feed hopper open via hydraulic cylinders, allowing direct access to the rotor for maintenance and inspections. The lower housing contains the impact bars and supports two screen holders, which contain 2 and 3 screen segments respectively. Both screen holders are independently operated by hydraulic cylinders to facilitate quick access and grate changes. The original technical manual covering operating procedures, maintenance instructions, and lubrication schedules is available with the machine. Serial number 49291. Contact for pricing, location details, and inspection scheduling. The following parts are included: - housing - intake hood - chassis - 3 rotors - hydraulic group - electric motor + hydro coupling More photos are available upon request. An on-site visit is possible.

Condition: like new (used), WEIMA WL 15 crusher chipper crusher – technical documentation – year of production 1992 Bjdpfx Aljfm Tp Do Rswr TECHNICAL PARAMETERS : main engine power 37 kW motor power from the hydraulic pump 1.5 KW total power: 39.25 kW AUTOMATIC REVERSING HYDRAULIC DRAWER shaft rotation 90 U/min rotor length 1500 mm Knock multi-knife shaft 36 knife dimensions: 35 x 35 mm sieve fi 20 / 15 mm height of the pressure drawer 180 mm chip collection viper rotor diameter 245 mm hopper size 1500 mm x 1500 mm drawer length 1000 mm dimensions (length/width/height) 270 x 240 x 280 cm weight 4000 kg

Condition: used, Year of construction: 1992, functionality: fully functional, fuel type: electric, – German-made – Year of manufacture: 1992 TECHNICAL PARAMETERS: - Feed opening: 600 x 800 mm - Rotor diameter: 175 mm - Rotor length: 600 mm - Total power: 18.5 kW - Number of knives: 14 pcs - Rotating crown cutting knives: 30 x 30 mm - Screen: Ø 15 and 12 mm - AUTOREVERSE - HYDRAULIC DRAWER - Height of pressure drawer: 180 mm - Rotor speed: 80–120 rpm - Extraction connection diameter: Ø 200 mm - Dimensions (L/W/H): 200 x 120 x 120 cm Bjdpsw Iqbyjfx Al Rjwr - Weight: 1200 kg

Condition: excellent (used), Vecoplan chipper for saw cuts Hacker 55/26/2 - German production - reverse - for the production of technological chips - a powerful shaft with a diameter of 650 mm TECHNICAL PARAMETERS: - 550 mm slot width - inlet height 260 mm - two knives - engine power 110 kW - conveyor belt length 5000 mm - 50 x 50 mm sieve - three upper pulling toothed shafts - four lower pulling toothed shafts - rotor width 650 mm - rotor diameter 650 mm - hydraulic lifting of the feed rollers - feeder height from the base 1100 mm Bsdpfxoihpg Es Al Rjwr Transport dimensions 1100x245x240 cm weight about 10 t

Condition: good (used), Chipper Klockner 120x400 L2 / 1W - German production - DTR Bwsdpfx Alohfmurj Rsr TECHNICAL SPECIFICATIONS: width 400 mm height 120 mm rotor diameter 430 mm rotor length 430 mm two knives sieve 60 x 60 mm engine power 37 kW engine power 2 x 2.2 kW two lower toothed shafts top toothed shaft feeder length 4900 mm chute the wood chips with a sieve transport dimensions (length / width / height) 850/245/220 cm weight ~ 2500 kg

Condition: like new (used), - made in Germany - new knives and counter-knives TECHNICAL PARAMETERS: - feeding dimension 520x1000 mm - motor power 80 kW - four rows of knives - counter knife - sieve 20 x 20 mm - sieve dimension 1000 x 900 mm - rotor diameter 600 mm Bjdpfx Aeqy Ek Hjl Rjwr - rotation of shaft 830 rpm Overall dimensions of the machine 235x170x290 cm weight ~ 4000 kg

Condition: ready for operation (used), functionality: fully functional, LINDNER wood chipper for sawmill offcuts, model T 400/140-2 Bwsdpjr Ak Rgefx Al Rsr – after technical inspection – in very good condition – suitable for producing technological wood chips TECHNICAL SPECIFICATIONS: infeed width: 400 mm infeed height: 140 mm rotor diameter: 450 mm rotor length: 400 mm main motor power: 33 kW infeed motors power: 2 x 1.5 kW number of knives: 2 pieces screen dimensions: 60 mm x 90 mm infeed rollers in very good condition feeder motor power: 1.5 kW feeder length: 4,200 mm transport dimensions (L/W/H): 430 / 240 / 150 cm weight: approx. 2,000 kg

Condition: used, functionality: fully functional, Klockner chipper 120x400 H-2WT - German production - shafts in very good condition TECHNICAL PARAMETERS: inlet width 400 mm inlet height 120 mm two knives rotor diameter 420 mm power of main motor 30 kW feed motor power 2 x 2,2 kW bottom shaft pulling toothed top pulling toothed shaft sieve fi 20 mm feeder length 2600 mm Bsdpjthfm Uefx Al Rowr transport dimensions (length / width / height) 300 / 245 / 170 cm weight 1500 kg

Condition: excellent (used), Year of construction: 1993, WEIMA WL 6 A wood chipper Crusher by the German company WEIMA - after the technical review - very good condition - year of production 1993 - documentation TECHNICAL PARAMETERS: hopper dimensions 800 x 1000 mm rotor diameter 175 mm rotor length 800 mm 18.5 kW main engine number of knives: 18 pieces rotatable cutting knives 30 mm x 30 mm HYDRAULIC DRAWER CHIPPER EQUIPPED BY AUTOREWERS V-rotor 12 mm and 10 mm sieve rotor speed 90 rpm spigot diameter 200 mm height of the pressure drawer 175 mm dimensions (length / width / height) 230 x 140 x 160 cm Bwedpfogxuvtox Al Rer weight 1400 kg

Year of construction: 1995, condition: like new (used), Vecoplan VTH/55/15/2 edging chipper – German production – autoreverse – for the production of technological chips – year of manufacture 1995 TECHNICAL PARAMETERS: inlet width 550 mm inlet height 130 mm two knives engine power 55 kW conveyor belt length 4300 mm sieve 50 x 50 mm toothed upper pulling shaft toothed lower pulling shaft rotor width 560 mm rotor diameter 560 mm Bwodpfxskth N Ns Al Rer hydraulic lifting of the feed shaft transport dimensions (length / width / height) 550 / 230 / 120 cm weight ~ 3000 kg

Condition: used, Year of construction: 2010, functionality: fully functional, – Polish manufacture – Very good condition – DTR documentation – Year of manufacture: 2010 – Vibrating trough – Autoreverse TECHNICAL PARAMETERS: – Inlet width: 400 mm – Inlet height: 120 mm – Main motor: 37 kW Bodpfxsw H Rp Ne Al Rswr – Feed motor: 2 x 1.5 kW – 2 knives – Screen: 50 mm x 50 mm – Vibrating feed table (length / width): 4500 / 430 mm – Vibrating trough motor power: 3 kW – Upper toothed feed roll – Lower toothed feed roll – Hydraulic cover for feed rolls – Rotor diameter: 400 mm – Rotor length: 430 mm – Dimensions (L/W/H): 650 x 200 x 190 cm – Weight: ~ 2500 kg

Condition: used, functionality: fully functional, Vecoplan chipper for lumber shavings 45/16/ 2V - made in Germany - perfect chips directly into the kiln - vibrating system TECHNICAL PARAMETERS: - width 450 mm - height 160 mm - number of knives 2 pieces - engine power 50 kW - rotor diameter 500 mm - rotor length 475 mm - sieve 40 x 40 mm - top pulling gear shaft 4 kW - bottom pulling gear shaft 2.2 kW - reverse - vibrating feeder 10500 mm x 450 mm - motor power 2.2 kW - cross vibrator machine 4500 mm x 2200 mm - motor power 1.5 kW - height 2450 mm Bodpfx Aet Hr Drjl Rswr Transport dimensions: 1050 cm x 245 cm x 245 cm weight ~ 4 t

Condition: used, functionality: fully functional, – very good condition – Austrian-made TECHNICAL SPECIFICATIONS: Bsdpfx Aeyabdcol Rowr – hopper dimensions: 120 cm x 100 cm – power: 2 x 11 kW – four shafts – shaft length: 400 mm – shaft diameter: 300 mm – screen: Ø 30 mm – auto-reverse – dimensions (L/W/H): 140 / 130 / 200 cm – weight: 600 kg

Condition: used, Year of construction: 2001, functionality: fully functional, overall weight: 1,600 kg, fuel type: electric, - German-made Bsdpsy Na N Defx Al Rowr - Year of production: 2001 – DTR documentation – Autoreverse – Pressing drawer TECHNICAL PARAMETERS: – Feed opening size (width/length): 820 x 1420 mm – Rotor diameter: 300 mm – Rotor length: 820 mm – Total power: 23 kW – Power supply: 400 V, 50 Hz – Rotating knives: 35 x 35 mm – Number of knives: 40 pcs – Screen: Ø10 and 12 mm – HYDRAULIC DRAWER – Pressing drawer height: 320 mm – Outlet diameter: Ø200 mm – Dimensions (L/W/H): 240 / 150 / 175 cm – Weight: ~1600 kg

Condition: used, Year of construction: 2019, functionality: fully functional, overall weight: 5,500 kg, fuel type: electric, – Manufactured in Poland – Year of manufacture: 2019 – Vibratory feeder TECHNICAL SPECIFICATIONS: – Inlet width: 650 mm – Inlet height: 250 mm – Shaft diameter: 600 mm – Shaft width: 650 mm – Main motor: 110 kW – Number of knives: 2 pcs. – Knife length: 650 mm – 4 lower driven toothed shafts – Lower shafts motor: 4 kW – 3 upper driven toothed shafts – Upper shafts motor: 4 kW – Vibratory feeder length: 5000 mm – Vibratory feeder width: 620 mm – Vibratory feeder motor power: 4 kW – Feed forward / reverse – Screen: 100 x 80 mm – Hydraulic lifting of shafts and cover Bjdpfx Asyw Sqiol Rswr – Hydraulic pump motor power: 1.1 kW – Transport dimensions (L/W/H): 820 / 180 / 190 cm – Weight: ~5400 kg

Condition: used, Year of construction: 2010, functionality: fully functional, overall weight: 1,300 kg, fuel type: electric, – Made in Germany – Year of manufacture: 2010 – Shredder equipped with a magnet for collecting metal parts TECHNICAL SPECIFICATIONS: – Feed opening dimensions: 600 x 800 mm – Feed opening volume: 0.6 m³ – Main engine: 18.5 kW Bwedpfx Ajy S Tg Ijl Rjr – Rotor diameter: 252 mm – Rotor speed: 90 rpm – Number of knives: 15 pcs – Knife dimensions: 40 x 40 mm – Screen size: 16 and 20 mm – Auto-reverse function – Hydraulic drawer: 160 mm – Chute for discharging wood chips, length: 2600 mm – Chute outlet height: 1450 mm – Chute diameter: 150 mm – Chute motor power: 0.75 kW – Weight: ~1300 kg

Condition: used, machine/vehicle number: 13398, Rotor diameter: 300 mm Bodpfeyr Tx Aex Al Rewr Rotor width: 1400 mm Rotor knives: 76 / 114 Stator knives: 1 row Infeed opening approx. 1400 x 1050 mm Drive motor: 2 x 30 kW

Condition: excellent (used), Year of construction: 2024, operating hours: 3 h, functionality: fully functional, Single-shaft shredder Vespa 40/60 VGA, manufactured in 2024, 3 operating hours for test run, 16 blades on the shaft, hole size 15 mm, shaft length 590 mm, power 15 kW, weight 1620 kg, serial number 990. Bedpfxszqtdnj Al Rewr

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 44,000 kg, rotor length: 2,800 mm, power: 315 kW (428.28 HP), rotational speed (max.): 87 rpm, - MERAK 2800-2 with 315 kW - Cutting system 116PR - PG190 screen (can be changed on customer request) Bedjugf Dwepfx Al Rowr - Feed chute - Dust suppression - Electrical central lubrication - Hydraulic safety guard - Overband magnetic separator Neodymium - HP - Rubberized bolted floor plates on tracked chassis

Condition: new, Year of construction: 2025, Features: - Overband Neodymium Magnetic Separator - HP - Dust suppression - Conveyor belt speed control Bwsdpow Elbdjfx Al Rer - Self-propelled chassis for semi-trailer

Condition: good (used), Year of construction: 2006, Bongard Major Manu Baguette Moulder - used - year of manufacture 2006 - production machine Bwsdpfxezqnyds Al Rsr - technically sound - voltage 400 V - motor power 0.55 kW - collection from warehouse / shipping option available - price on request

Condition: used, machine/vehicle number: 10657, Rotor diameter: approx. 368 mm Rotor width: approx. 1270 mm Number of rotor blades: approx. 60 Stator blades: one row Bwjdoznpc Uopfx Al Rjr Drive motor: 37 kW

Condition: used, overall weight: 2,000 kg, rotor diameter: 252 mm, total length: 2,200 mm, total height: 2,520 mm, total width: 1,500 mm, rotor width: 800 mm, power: 18.5 kW (25.15 HP), filling opening width: 1,000 mm, filling opening length: 1,050 mm, sieve perforation: 15 mm, extraction nozzle diameter: 200 mm, No. 04546 Single-shaft shredder WEIMA WL 6 Used Single-shaft shredder for shredding wood waste, offcuts and panel materials Motor power 18.5 kW Rotor diameter 252 mm Rotor width 800 mm Rotor speed 90 rpm V-rotor system Bodpfxoznnf Us Al Rjwr Hydraulic material pusher Manual and automatic operation Perforated screen with a hole diameter of approx. 15 mm Two-part feed hopper approx. 1050 x 1000 x 1800 mm LWH (each of the two hopper sections is approx. 900 mm high) 2 extraction ports, diameter 200 mm each Transport dimensions approx. 2200 x 1500 x 2520 mm LWH Weight approx. 2000 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: excellent (used), Year of construction: 2013, rotor diameter: 370 mm, rotor length: 1,200 mm, type of input current: three-phase, year of last overhaul: 2026, input voltage: 400 V, WEIMA WL 12 – Single-shaft shredder for plastics For sale: a single-shaft shredder from WEIMA, model WL 12 (or a special version based on this model), designed for shredding plastics. The machine features a robust and durable construction, a hydraulic material feed system, and a drive with a Bonfiglioli gearbox. It is ideally suited for recycling plants, plastics processing companies, and manufacturing businesses. Technical data: Manufacturer: WEIMA Maschinenbau (Germany) Type: single-shaft shredder Working chamber: 1200 × 1200 mm Working length of the rotor: 1200 mm Rotor diameter: approximately 320–370 mm Hydraulic material feed system Bonfiglioli gearbox Rotor speed: approximately 90 rpm Motor power: 37 kW Power supply: 400 V Weight: approximately 3300 kg The machine is designed for shredding PP, PE, HDPE, LDPE, ABS, PS plastics, plastic crates, pipes, profiles, car bumpers, post-production waste, and injection molded parts. The output depends on the type of material and the screen used, and is approximately 500 to 1000 kg per hour. Bsdpfx Alszqgmpe Rjwr The machine is based on a proven WEIMA design, which is valued for its durability, reliability, and low operating costs. It is possible to inspect and test the machine on site. For any questions, please feel free to contact us by phone.

Condition: like new (used), Year of construction: 2014, functionality: fully functional, shredder SG - 500/200 - the shredder is completely overhauled and ready for operation - the shredder is also equipped with a vibrating conveyor 8 m long with a separation where sawdust is separated and equipped with a magnet with metal detection Bwedpfx Aowhw Iuol Rjr in the attachment you will find technical parameters for the machine ¨ - electrical switchboard for the machine