Used Chip Centrifuge for sale (5,276)

Condition: good (used), Year of construction: 2013, Heating system for fuel wood (wood chips or logs), capable of generating steam up to 150°C, also suitable for hot water applications. Hydraulic feed allows for use of larger fuel materials. Heating capacity up to 850 kW. Location: Austria. Cedpsyhlrmofx Ac Njpu

Condition: excellent (used), GEA Westfalia separator for dewatering industrial and municipal waste water sludge. In excellent condition. Cjdpfxoyf Hw Se Ac Nopu

Condition: good (used), Centrifugal pump, acid pump, alkali pump, water pump for groundwater lowering pump -Centrigeminal pump: with stainless steel tank -Motor: 2.2 kW -Flow rate: 1900 l/min -Pumping height: 15 m -Tank capacity: approx. 500 liters -Overall dimensions: 1080/920/H1190 mm Cpedpfx Asyf Augec Nsu -Weight: 126 kg

Condition: not inspected (used), Year of construction: 1998, functionality: unexamined, machine/vehicle number: 98W5932, total length: 4,100 mm, total height: 4,406 mm, total width: 1,100 mm, conveyor belt width: 410 mm, delivery head: 4,100 mm, overall weight: 2,500 kg, ejection height: 4,100 mm, type of input current: AC, conveying length: 6,655 mm, input voltage: 400 V, transport height: 4,406 mm, conveyor belt length: 13,310 mm, input frequency: 50 Hz, conveyor belt speed: 50 mm/s, We are offering this unchecked Mayfran VBU-1000 chip conveyor, year of manufacture 1998. Manufacturer: Mayfran GmbH Year of manufacture: 1998 Csdpfxsyg Etho Ac Njpu Model: VBU-1000 Serial number: P13.98W5929.01 Position number: 2 Article number: 1-56720 If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: new, Year of construction: 2025, * 60 lt Capacity * 2,2 kW High performance three phase current drive motor. * Adjustable speed control up to 200 rpm. * Control panel and dosing pump included. - The dosage pump automaticly puts the chemical to the bowl * Working hours timer * PU or INOX plate * Changeable valve for the wastewater decharging. * Inner bowl has canals and gaps for ensuring non stick wall. Cpsdeh Nnbcopfx Ac Nou

Condition: like new (used), functionality: fully functional, machine/vehicle number: CS1, GEWA Chio vacuum CS1. The new price was €1,750. Cedpfx Acjxiv Ers Njpu

Condition: ready for operation (used), Year of construction: 2008, A Baader refiner for the separation of soft and solid components is available. Throughput capacity: approx. 800kg/h, connected load: 3kW, drum hole diameter: 1mm, machine dimensions X/Y/Z: approx. 1100mm/900mm/1300mm, weight: approx. 450kg. An on-site inspection is possible. Cpjdpfx Aoygmbgjc Nsu

Condition: used, Chip conveyor, chip elevator, inclined conveyor belt, used machine Manufacturer: Mayfran Type: POO.96M3806.01 Overall dimensions: Width: 6300 mm Depth: 1050 mm Height: 1820 mm Codeydbzvepfx Ac Njpu Belt size: 6600 × 330 mm Electrical data: 400 V Slat size: 30 mm Slat pitch: 245 mm

Condition: like new (used), Year of construction: 2019, operating hours: 900 h, functionality: fully functional, As-new AL-KO POWER UNIT 300P dust extraction filter, 2019 Acquired just before the pandemic as a dust extraction system for a CNC machine. Very little usage, under 900 operating hours. The Biesse Rover milling machine is also for sale in a separate listing. Buyer is responsible for dismantling and removal of the unit. The AL-KO Power Unit is a highly efficient, enclosed filter system equipped with a clean-air side fan. The system complies with H3 filtration class requirements: return air dust concentration is below 0.1 mg/m³. Supplied fully assembled for easy and fast installation and commissioning. Dust is collected into containers beneath the filter, enabling simple removal of shavings from under the machine. The filtered air can be returned to the workshop or discharged outside via a dedicated duct system. The enclosed design ensures low operating noise and a dust-free environment around the unit. The dust concentration of the return air is just one tenth compared to conventional bag-type extractors! Filter cleaning is performed automatically with compressed air or mechanically via shaker devices. Automatic cleaning is controlled by a vacuum sensor. Post-cleaning is performed when the unit is switched off. The filter media is Class C and features antistatic properties. Filter bag replacement is quick and easy via the light-opening roof panel on the filter. By positioning the extraction fan on the clean-air side, the system offers advantages over conventional units in terms of fire safety, noise level, and maintenance-free operation. Mechanical pre-separation of chips reduces wear on the filter media and lowers the filter load, ensuring maximum filtration efficiency. The Power Unit series achieves noise levels as low as 69 dB! In addition to wood, AL-KO dust extraction systems are also suitable for other machinable materials such as plastics, stone, cement, gypsum, and aluminium. Codpoxz Rg Ijfx Ac Nopu POWER UNIT 300P - Extraction port D 300 mm, max. air flow 6,000 m³/h - Motor power 7.5 kW – filter area 30 m², collection containers 3x250 l - Includes compressed air cleaning - Includes automatic shutoff system

Condition: used, Year of construction: 1994, Overview  The Centrifugal Separator Type SB80-06-076 from the manufacturer GEA Westfalia was previously used at a brewery in Estonia. Due to a complete shutdown of the production plant, this unit is for sale. Till closing of the factory, the separator was used frequently. Tech Specs  4500 rpm with self cleaning drum Accessories  Spare Parts Tools Csdpev N Hcxjfx Ac Nopu

Condition: like new (used), Year of construction: 2019, Bürener chip conveyor, for Emco E45, Maxxturn 45, 345 II, with all mounting parts included. Like-new condition. Year of manufacture: 2019. Discharge height: 1200 mm. Cpsdpjyga Tpefx Ac Nsu

Condition: like new (used), The MSP 120 ZK is ideally suited for crushing and subsequent briquetting of various types of metal chips. The MSP 120 ZK briquetting press with integrated shredder is composed of a hydraulic chip press paired with an upstream shredder, both perfectly matched to each other. This system enables the crushing and compaction of chips generated during turning and milling operations. The volume is significantly reduced, and the briquettes are separated from the coolant lubricants (emulsion, oil) absorbed during earlier machining processes. The system consists of a feed hopper for loading the material to be processed and a shredder inside the hopper, which reduces chip length. A conveyor system moves the shredded chips continuously and stepwise via a conveyor belt into the chip press hopper. There, two augers feed the material into the compaction chamber. The system is equipped with a monitored liquid collection tank and pump, allowing coolants to be returned to the production process. Cycle control is managed by a PLC and an electronic level sensor for the monitoring of the hopper fill level. Optionally, a tipping device can be added for manual loading of the unit. Briquetting Press: Throughput (Aluminum): 15–20 kg/h Throughput (Steel, Copper): 45–60 kg/h Briquette diameter: 60 mm Productivity: 120–180 pcs/h Specific pressure on briquette: 1,050 kg/cm³ Motor pump power: 7 kW Total installed power: 10 kW Voltage: 400V / 50 Hz Oil tank: 80 l Dimensions: 1,400 x 1,200 x 1,050 mm Weight: 800 kg Shredder: Number of knife shafts: 1 pc Motor power: 5.5 kW Number of knives: 16 pcs Exchangeable knives: Yes Knife size: 25 mm Knife material: Hardened steel Shaft length: 400 mm Screen mesh size: 20 mm Hopper inner diameter: 1,000 mm Codew R Ranopfx Ac Nspu Hopper volume: 1 m³ Weight: 280 kg Power supply: 380V Overall system dimensions: 2,820 x 1,862 x 2,065 mm Colour: Textured paint, RAL 7035 light grey

Condition: used, The centrifuge comes with a Beckmann Coulter SX4750 Rotor! Speed: - 200–10,200 RPM (10-RPM increments) - Display in RPM or RCF Time: - Up to 99 h 59 min or continuous - Displays remaining or elapsed time Temperature: - Set range: −10 to +40 °C (1° increments) - Control accuracy: ±2 °C - Ambient range: 10–35 °C Humidity: - < 75% (non-condensing) Acceleration - 10 rates Deceleration - 11 rates Dimensions (W × D × H): - 76.2 × 62.2 × 34.3 cm - 30.0 × 24.5 × 13.5 in. Weight: - 128 kg (283 lb) Ventilation Clearance: - 7.6 cm (3.0 in.) Finishes: Cpsdpfx Aceyfnxds Neu - Coated control panel - Acrylic enamel housing Good working condition. Please check out our other listings as well.

Condition: excellent (used), Gericke model CSM722 Inline Centrifugal/Rotary Sifter. Stainless Steel. Codjyfhf Dopfx Ac Njpu

Condition: good (used), Year of construction: 2007, functionality: fully functional, power: 7.63 kW (10.37 HP), total width: 2,300 mm, total length: 4,000 mm, total height: 3,000 mm, type of input current: three-phase, pressure: 6 bar, input voltage: 400 V, nominal heat output: 950 kW (1,291.64 HP), operating pressure: 6 bar, Equipment: hot water, type plate available, The Pyrtec boiler system is an underfeed stoker combustion unit with internal grate and burnout grate for universal application, and is suitable for a particularly wide fuel spectrum, ranging from dry wood waste to wet forest wood chips. Maximum water content w= 50%, corresponding to a wood moisture u of 100%. Cpjdpfx Acexwhw Ae Nju The complete boiler system is type-approved (Approval No.: 02-221-512) with continuous quality control by TÜV and consists of the following components: FEED AUGER WITH BACK-BURN BARRIER LAYER: The feed auger transports the fuel into the combustion chamber and the grate area of the fireblock. The robust auger flights are made from heat-resistant chromium steel in the combustion chamber area. The feed tube is equipped with mounts for the back-burn thermostat and the thermal extinguishing valve. Above the auger is a dosing container with a photoelectric sensor for level control of the fuel barrier layer required by TRD 414. The drive is provided by a maintenance-free helical gear motor and chain drive enclosed in a dust-tight chain guard. Accessoires: Extinguishing valve with dirt strainer COMBUSTION BLOCK: Solid combustion block with multiple layers of insulation and high-quality chamotte lining. The feed and grate area consists of the fire chamber, gasification grate, and descending burnout grate. All of these components are made of highly heat-resistant cast steel (Material No. 1.4868), at least 12 mm thick and individually replaceable. This type of primary combustion system has proven to be extremely effective even with challenging fuels (wet sawmill residues, high bark content, etc.). Ash and foreign substances falling through the grates can easily be removed from outside through access holes sealed with covers. The horizontal combustion chamber is optimally shaped for complete burnout and also provides a large ash compartment. The combustion chamber door is heavy-duty, well-insulated, and can be ideally swung aside on a robust double-joint hinge for maintenance purposes. BOILER: Horizontal hot water boiler in three-pass design, mounted on the fireblock, insulated and stylishly clad. The insulated boiler front door is designed to allow the installation of an oil or gas burner. Operating temperature: max. 120 °C Operating pressure: 3.0 bar Test pressure: 6.0 bar FLUE GAS DUST COLLECTOR PYRTEC-140 to PYRTEC-650: Constructed in axial cyclone design, fully insulated and mounted to the boiler. Equipped with two insulated cleaning covers, an ash container with quick-release fastener, and mounting flange for the flue gas fan. FLUE GAS DUST COLLECTOR PYRTEC-1000: Constructed in axial cyclone design, fully insulated, free-standing for optimal placement. Includes two insulated cleaning covers, mounting flange for the flue gas fan, and connection for the ash container. FLUE GAS FAN: Specially designed fan for wood combustion operation, very quiet, with a heavy-duty, heat-resistant motor and flexible heat-dissipating hub. The fan housing can be continuously rotated at the intake, with a round exhaust outlet.

Year of construction: 2023, operating hours: 1 h, condition: new, functionality: fully functional, machine/vehicle number: N.A., Installed, unused CIC 600 inverting filter centrifuge made of Hastelloy C22, 2.4602. The centrifuge was delivered and installed in 2023, but this system, along with much of the other equipment, has never been put into operation. The centrifuge features a drum diameter of 600 mm, a nominal capacity of 52 liters or 65 kg, maximum drum speed of 1940 rpm, maximum centrifugal acceleration of 1260 (g), housing material 1.4571, product-contact parts made of 2.4602 — identical to Heinkel centrifuges. Scope of supply: a) CIC 600 inverting filter centrifuge b) Support frame c) CIP system integrated into the main unit d) Quick-release front housing, tool set included e) Inertization pressure monitoring integrated into the main system f) Solids discharge valve g) Flooding function h) Washing filter, including coating Cpodsyffr Ujpfx Ac Nou Technical details are available on request. Please contact us if you would like a written offer. Dismantling, packaging, and loading onto a truck will be organized and supervised by Cycron GmbH. This ensures that all work is carried out to the highest professional standards. For further questions or to get in touch, please contact us at any time — we look forward to hearing from you. Cycron GmbH, Switzerland

Condition: like new (used), Year of construction: 2022, operating hours: 1 h, functionality: fully functional, total length: 5,595 mm, total height: 2,031 mm, total width: 680 mm, delivery head: 1,550 mm, ejection height: 1,400 mm, type of input current: three-phase, conveying length: 2,750 mm, input voltage: 380 V, transport height: 450 mm, conveyor belt length: 5,595 mm, input current: 1 A, input frequency: 50 Hz, Deburring conveyor technology for dry operation Type: P-40 Design: Z-shape Chain pitch: 40 mm Conveyor width (standard): 680 mm Container width: 680 mm Loading length: 2,750 mm Loading height: 240 mm Loading area: 2,750 mm Incline angle: 30° Discharge height: 1,550 mm Discharge height above floor: 1,400 mm Discharge length: 450.0 mm Total conveyor length: 6,157 mm Cpsdpfx Ajwvgpksc Nju Lifting eyes: Yes Inclined section covered: Yes Loading hopper: Yes Covers in loading area: Smooth sheet steel Discharge chute: Yes Discharge chute height: 150 mm Reach-in protection per EN618: Yes, conveyor CE-compliant Castors: Yes Adjustable feet: Yes Drive: Gear motor Drive position: Right side Brand: SEW Power consumption: 0.25 kW Overload protection via limit switch (slip ring)

Condition: ready for operation (used), Year of construction: 2003, A self-cleaning disc stack centrifuge (disc separator) GEA is available. Drum speed range: 4000-4800rpm, drum diameter: 682mm, max. feed density liquid/solids: 1.1kg/dm³/1.3kg/dm³, drum volume: 125l. An on-site inspection is possible. Cpodpfoydpz Dsx Ac Nou

Condition: like new (used), Year of construction: 2016, operating hours: 1,000 h, functionality: fully functional, Drag chain conveyor systems (5 units) in excellent condition (used only for a few months) Cpedjyc Nfgjpfx Ac Nju

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Crusher of the German company WEIMA Cedpfx Aouditwoc Njpu - overhauled - year of production 1992 - documentation TECHNICAL PARAMETERS: hopper dimension 800 x 1000 mm rotor diameter 315 mm rotor length 800 mm rotor rotation 90 rpm V-rotor main motor 22 kW number of knives 19 pieces rotating cutting knives 30 mm x 30 mm sieve fi 20 mm and 15 mm AUTOREWERS HYDRAULIC DRAWER height of pressing drawer 275 mm diameter of spigot fi 200 mm overall dimensions of the machine (length / width / height) 210 / 160 / 180 cm weight 1600 kg

Condition: used, Year of construction: 2019, Automatic separator for removing bacteria from milk and whey (bactofuge). These operations are necessary to eliminate bacterial contaminants that may pose a health risk and shorten the shelf life of the product. Brand: POLAT (Makina San) Model: PMS BX5 Centrifuge speed: 6,200 rpm Year of production: 2019 Power supply: 400 V Installed power: 22 kW Weight: 1,220 kg Condition: used Cpedpjyc E E Asfx Ac Nou Electrical documentation available.

Condition: new, Year of construction: 2026, functionality: fully functional, POWER kW 2.2 Cpedpfsx U D Dcex Ac Nsu FREQUENCY Hz 50 SUPPLY VOLTAGE V 400 MAXIMUM VACUUM mbar 30 MAXIMUM AIR FLOW m³/h 1400 NOZZLE DIAMETER ømm 160

Year of construction: 1971, condition: excellent (used), Brand: Sun Mountain Type: FTM Cpsdpfx Acod Sdg So Nju Year of construction: 1971 Dimensions: approx. B 1,00 X 1,00 x H 1.50 m Weight: approx. 500 kg All information without guarantee. The machine is located in a very good condition. A demonstration of power is possible in our showroom at any time.

Condition: good (used), Chip Centrifuge T & A Type MZ 500L - Model: MZ 500 L - Year of manufacture: 2001 - Speed: 980 rpm - Filling capacity: 50 kg - Drum diameter: 500 mm Codsybb Dfspfx Ac Nopu - Power: 4 kW - Drum holding capacity – diameter: 500x350 mm - Drum volume: 50 liters - Circuit diagram available Dimensions: LxWxH: 1.0x1.0x1.3 meters / Weight approx. 380 kg Subject to errors and omissions.

Condition: good (used), High performance pumps, pump block for storage and retrieval of fuel oil, diesel, lubricants, oils, biodiesel, waste oil, frsich oil, ect.... Manufacturer: Pumps: Alfons Haar Hamburg Electric motors: Flender Capacity: 380 l/ min and 700 l/ min Cpodpfx Ajiw Ehboc Neu The plant consists of 2 units with 3 pumps and electric motors each. Control cabinets are also included in the scope of delivery. Note: the electric motors are not sold separately ! Only serious and serious inquiries are answered under indication of: Name, e-mail address and telephone number answered.