Used Ceramic for sale (1,022)

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, height adjustment type: electric, actuation type: electric, rotational speed (max.): 3,000 rpm, rotational speed (min.): 700 rpm, total width: 1,480 mm, total length: 4,440 mm, total height: 2,700 mm, overall weight: 1,900 kg, Equipment: CE marking, documentation/manual, Vertical glass drilling machine with two opposing spindles – the hole is drilled from both sides at once, with no blow-out on the exit side and no need to turn the sheet. Brand new, made in Poland, CE. Batch drilling up to 20 holes – the cycle is programmed once, then the machine runs it on its own Automatic glass thickness measurement (±0.4 mm) – the PLC calculates spindle depth by itself Bar positioning accuracy ±0.7 mm – minimises cracking and chipping Hole chamfering – electronically controlled 7" HMI panel – operator training approx. 3 hours Modular design – servicing without dismantling the machine 10 years of remote online support from purchase, 12-month warranty Specifications: Dimensions 4,440 × 1,487 × 2,793 mm · weight 1,900 kg · spindle speed 700–2,800 rpm · max. drilling height 1,050 mm · max. sheet weight 200 kg · pneumatic clamping · drill cabinet for 70 bits · thin-wall bits 1/2", L=75 mm Cjdpfx Aezyb Sroiieri · float glass EXPOGLASS® – Polish manufacturer of glass processing machinery, 12+ years on the market.

Condition: like new (used), Year of construction: 2023, machine/vehicle number: SN432511, functionality: fully functional, power: 75 kW (101.97 HP), input voltage: 400 V, input current: 108 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,340 °C, inner dimension length: 1,000 mm, inner dimension width: 800 mm, inner dimension height: 1,250 mm, total length: 1,800 mm, total width: 1,900 mm, total height: 2,500 mm, overall weight: 2,800 kg, number of chambers: 1, control type: PLC-controlled, actuation type: electric, Equipment: CE marking, documentation/manual, with 12 months warranty -Internal dimensions (w x d x h): 800 x 1000 x 1250 mm -External dimensions (w x d x h): 1790 x 1900 x 2500 mm -Control cabinet (w x d x h): 1200 x 500 x 2350 mm Crsdpfx Aiezbr U Ujioi -Controller cabinet (w x d x h): 600 x 900 x 1850 mm -Capacity: 1000 liters -Maximum temperature: 1340 °C -Siemens PLC control system H1700 (100 programs, each with 20 segments) -Nabertherm NCC, computer-aided, extremely user-friendly control system, recording of all parameters. Recordings can be processed, supplemented with batch data, etc., and archived and printed. -Printer and UPS integrated in the controller cabinet -Automatically generated report after each heating cycle -Thyristor-controlled -2 opposing, lockable doors with safety interlock -5-sided heating -Manual air inlet damper -Motorized exhaust damper -Stainless steel exhaust hood with pipe connection flange -Calibrated control thermocouples for the three heating zones -Temperature accuracy: ± 15 °C from 500 to 850 °C, ± 10 °C above 850 °C, all values according to DIN 17052-1 in the empty working space, without recording -Separate control cabinet -Audible alarm and alarm light -Overtemperature limiter -Power: 75 kW -Oven weight approx. 2320 kg + control cabinet + controller cabinet -DGUV V3 test currently valid with report -Documentation, CE declaration, circuit diagrams The oven is in TOP condition. It has been used for approximately 10 months in a cleanroom for the production of implants and is of high quality (new price 100,000 EUR net) and absolutely clean. We would be happy to offer installation and commissioning as well as training for your employees. Please contact us! We offer new and used industrial furnaces. Inspection in our warehouse upon request! Chamber furnace, furnace, kilns, annealing furnace, firing furnace, hardening furnace, heat treatment furnace, tempering furnace, enameling furnace, drying oven, industrial furnace, ceramic furnace, tempering furnace, sintering furnace

Condition: used, functionality: fully functional, Haendle wet pan mill HMS2080b, Haendle Siebrundbeschicker BRSH19, Haendle Extruder PZVA 60a/50 Crsdpfxey U Ighj Aiisi

Condition: reconditioned (used), functionality: fully functional, operating pressure: 150 bar, empty load weight: 135 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 150 °C, NILFISK ALTO NEPTUNE 4-50 FA HOT WATER PRESSURE WASHER NEW HEATING COIL The unit comes with new accessories, including an R+M (German brand) spray gun, a stainless steel lance, a steel-braided hose, and a 25° power nozzle. A durable brass pump head with new ceramic pistons and seals ensures long-lasting, trouble-free operation. A highly efficient three-phase motor ensures stable performance, even during prolonged use. With an operating pressure of 150 bar and a flow rate of up to 900 l/h, the machine is effective for heavy-duty tasks in construction, industry, logistics, and agriculture. Each unit we offer features custom-taken photos; you are buying the exact machine shown. Csdpfx Ajz Ayd Ssiieri TECHNICAL DATA: Supply voltage [V]: 400 (3-phase) Flow rate [l/h]: 900 Operating pressure [bar]: 150 Max. Heating temperature [°C]: 80–150 Connected load [kW]: 6 Detergent tank [l]: 10 Hose length [m]: 10 Weight [kg]: 136 EQUIPMENT: NEW heating coil NEW heavy-duty spray gun (German brand R+M) NEW stainless steel spray lance NEW reinforced 10m high-pressure hose with steel braiding NEW 25° power nozzle Water filter and GEKA claw couplings – FREE KEY FEATURES: Open oil system – no operating time limits Built-in chemical tank allows for direct dispensing of cleaning fluid through the machine Highly legible and intuitive control panel Simple design and easy access to internal components make the machine user-friendly and easy to service

Condition: reconditioned (used), functionality: fully functional, pressure: 150 bar, empty load weight: 100 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 85 °C, Kärcher HDS 801 E Hot Water Pressure Washer The unit comes with new accessories, including a German-made R+M spray gun, a stainless steel lance, a steel-braided hose, and a 25° power nozzle. A durable brass pump head with new ceramic pistons and seals ensures long-lasting, trouble-free operation. A highly efficient three-phase motor ensures stable performance, even during prolonged use. With an operating pressure of 150 bar and a flow rate of 740 l/h, the machine is effective for heavy-duty tasks in construction, industry, logistics, and agriculture. Fully electric water heating allows for operation in areas where exhaust emissions are prohibited. Each unit we offer features unique, actual photos; you are buying the exact machine shown. TECHNICAL DATA: Supply voltage [V]: 400 (3-phase) Credoz Aiyvjpfx Aiiji Flow rate [l/h]: 740 Operating pressure [bar]: 150 Max. Heating temperature [°C]: 85 Heating element power [kW]: 24 Connected load [kW]: 29,6 Cleaning agent tank [l]: 20 + 25 Hose length [m]: 10 Weight [kg]: 100 EQUIPMENT: NEW heavy-duty spray gun from the German brand R+M NEW stainless steel spray lance NEW reinforced 10m high-pressure hose with steel braiding NEW 25° power nozzle Water filter and GEKA claw couplings – FREE KEY FEATURES: Open oil system – no operating time limits Two built-in chemical tanks allow for direct dosing of cleaning fluid through the machine Highly legible and intuitive control panel Simple design and easy access to internal components make the machine user-friendly and easy to service RM110 water softener tank prevents corrosion and limescale buildup inside the heating coil and other lines.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, input current: 125 A, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Bystronic / Hegla laminated glass (VSG) cutting system Speedcut and ProLam 3700, comprising of following components: - Speedcut float glass cutting table with tool changer and second cutting oil circuit, flat belt conveyor and air cushion, with 2 special cutting heads for laminated glass cutting (lower cutting head can be deactivated for float glass cutting) - Hegla conveyor belt TW 7833 RW - Hegla cross-cutting station STB I 33 - Hegla laminated glass cutting bridge ProLam 37 , including a traverne rotation device, remote maintenance via the internet using VPN, including software - Hegla air cushion table LTR 3034, with 4 support arms The entire plant is in excellent condition and will be available EXW from its current location from the end of December 2026. Crjdpfxszu Ayyo Aiisi

Condition: ready for operation (used), Year of construction: 2014, operating hours: 1,618 h, travel distance Z-axis: 430 mm, number of axes: 5, number of slots in tool magazine: 16, table length: 4,300 mm, table width: 2,205 mm, spindle motor power: 13,000 W, spindle speed (max.): 20,000 rpm, swivel angle B-axis (min.): -99 °, swivel angle B-axis (max.): 100 °, swivel angle C-axis (max.): 360 °, This 5-axis BIESSE Rover A FT 2243 including WINSTORE 3D K1 was manufactured in 2014. It operates on a 400 V power supply. With approximately 1,700 hours of axis movement, this CNC wood machining centre is designed for precision and efficiency. If you are looking to get high-quality wood machining capabilities, consider the BIESSE Rover A FT 2243 machine we have for sale. Contact us for further details. Technical Data • Working Table Dimensions: 4,300 × 2,205 mm • Maximum X-Axis Speed: 80 m/min • Maximum Y-Axis Speed: 60 m/min • Maximum Z-Axis Speed: 20 m/min • Z-Axis Travel (3-/4-Axis Version): 325 mm • Z-Axis Travel (5-Axis Version): 430 mm • Maximum Workpiece Clearance in Z: 170 mm • Maximum Workpiece Clearance with Sweeping Arm: 120 mm • X-/Y-Axis Drive: Rack and Pinion • Z-Axis Drive: Ball Screw • Axis Guides: Linear Guides with Recirculating Ball Bearing Blocks • Vacuum Pump Capacity: 300 m³/h at 50 Hz • Vacuum System: 20 Independent CNC-Controlled Zones • Working Fields: 2 • Clamping Areas: 2 in X • Pneumatic Stops: 16 • Grid Table Pitch: 30 mm • Vacuum Module Dimensions: 132 × 146 mm • Vacuum Module Height: 29 mm • Vacuum Module Rotation Increment: 15° • Air Cushion Table Blower: Yes • Maximum Single Panel Thickness: 50 mm • Minimum Single Panel Thickness: 9 mm • Maximum Multiple-Panel Loading Thickness: 20 mm • Maximum Multiple-Panel Unloading Thickness: 60 mm • Protective Board Thickness: 8–25 mm • Maximum Panel Weight: 200 kg Credpfx Aiozuygqoiei • Minimum Loadable Panel Size in Y: 800 mm • Unloading Conveyor Length: 4,800 mm • Maximum Unloadable Panel Length: 4,300 mm 5-Axis Machining Unit • Number of Axes: 5 Interpolating Axes • Tool Interface: HSK F63 • Cooling: Liquid-Cooled • Power S1: 11 kW / 15 HP at 12,000 rpm • Power S6: 13 kW / 17.4 HP at 12,000 rpm • Maximum Spindle Speed: 20,000 rpm • C-Axis Rotation: 360° Continuous • C-Axis Speed: 12.4 rpm • B-Axis Positioning Range: ±100° • B-Axis Speed: 12.4 rpm • Spindle Bearings: Ceramic • Drive Motor: Brushless, Digitally Controlled • Gearbox: Harmonic Reduction Gear • Lubrication: Lifetime Lubrication Drilling Head • Type: BH 26 2L • Maximum Number of Tools: 26 • Vertical Drilling Spindles: 16 • Vertical Spindle Arrangement: 8 in X / 8 in Y • Vertical Spindle Pitch: 32 mm • Horizontal Drilling Spindles: 4 with Double Output • Horizontal Spindle Axis Distance: 32 mm • Grooving Saws: 2 • Grooving Saw Directions: X / Y • Grooving Saw Diameter: 120 mm • Maximum Grooving Depth: 25 mm • Motor Power: 1.7 kW at 2,800 rpm / 3 kW at 6,000 rpm • Maximum Drilling Speed: 6,000 rpm Tool Magazine • Type: Turret Tool Magazine • Capacity: 16 Tools • Tool Position Spacing: 114 mm • Maximum Tool Diameter with Full Magazine: 110 mm • Maximum Individual Tool Weight: 7.5 kg • Maximum Total Tool Weight: 55 kg Automatic Loading / Unloading • Loading Direction: Front • Material Flow: Right to Left • Loading / Unloading System: Type B • Suction Cups: 5 • Automatic Loading Capacity: Up to 3 Panels • Sweeping Arm: Yes • Automatic Table Cleaning: Yes • Loading Table: Automatic X/Y Alignment • Unloading Conveyor: Motorized • Conveyor Control: CNC-Controlled • Conveyor End Detection: Photocell WINSTORE 3D • System: WINSTORE 3D K1 • System Length: 16,000 mm • Beam Length: 8,000 mm • Additional Modules: 3,000 / 6,000 / 8,000 mm • Maximum Suction Frame Length: 5,200 mm • Cross Conveyors: Belt Type, 5,200 mm • Panel Handling: Raw and Thin Panels • Panel Weight Detection: Load Cell

Condition: excellent (used), Year of construction: 2008, ManRoland 705 3B LV HiPrint Year: 2008 Cedpfx Aiszzk U Soisri Maximum sheet size: 740 × 1040 mm Minimum sheet size: approx. 340 × 480 mm Maximum printing area: approx. 730 × 1020 mm Thickness: 0.04-1.0 mm Maximum speed: 16,000 sheets/hour Roland feeder Double diameter impression cylinder, Automatic material thickness setting, Automatic device for washing rubber blankets and stretching blankets, PPL - automatic plate changing system, RCI, Automatic device for washing ink units, Roland Deltamatic dampening system, Ceramic humidification duct, Quick Change Coating, Seccomatic IR/TL, ColorPilot, Kersten deionization system, Dust and dirt extraction device, Technotrans Beta.d, Grafix Cantronic.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain iTNC 620, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! Note: The machine is located on the first floor. The main difference between the MTRent MTcut v60 and the MTRent MTcut v60D lies in the inclusion of an additional rotary axis ("D" stands for rotary table or integrated 4th axis for extended machining capabilities). TECHNICAL DETAILS Travel in X-axis: 600 mm Travel in Y-axis: 420 mm Travel in Z-axis: 450 mm Distance from spindle nose to table: 120–570 mm Spindle speed range: 60 – 12,000 rpm Torque: 70 Nm (S6, 40 %) Spindle power: 11 kW (40 %) Spindle cooling: Oil/Air Tool interface: SK40 Pull stud: DIN 69871/72 Table dimensions: 750 × 420 mm Number of T-slots: 5 T-slot width: 14 mm H8 T-slot spacing: 65 mm Rapid traverse X/Y/Z: 32 Feed rate: 1 – 12,000 mm/min Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Tool positions: 30 Tool change time: 1.5 s Maximum tool weight: 6 kg Maximum tool diameter: 76 mm Maximum tool length: 250 mm Crodszzlhaepfx Aiioi MACHINE DETAILS Control system: Heidenhain iTNC 620 Central lubrication: R68 (ISO 68) Hydraulic oil: R32 (ISO 32) Compressed air connection: 3/8" Compressed air: 6–8 bar Power supply: 400 V Fuse rating: 63 A Connected power: 25 kVA Coolant tank: 160 l Linear guides X/Y/Z: 30/35/35 mm Machine bed: Meehanite casting Machine weight: 4,000 kg EQUIPMENT Rotary table or integrated 4th axis Heidenhain iTNC 620 CNC control Digital Heidenhain drive technology Ceramic-bearing precision spindle Separate spindle cooling for constant temperature Integrated chip conveyor Maintenance-free Siemens spindle motor THK linear guides in all three axes 30-position tool changer with dual gripper Central lubrication Large access door to the work area Loading option from above using an overhead crane Two waterproof work area lights CE certification • The height and weight of the asset must be considered when selecting the transport vehicle. • A forklift is available for loading. • If the item is not collected on time, a storage fee of €20.00 per lot and for each day started will be charged. The fee must be paid before collection. • The sale is made without any warranty or guarantee. • The information on the technical specifications comes from the original offer. • No liability is accepted for typing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the item on site before the end of the auction.

Condition: used, Year of construction: 2008, functionality: fully functional, Stefiglass Sprint 1600 1600mm vertical glass washing and drying machine. Csdpfxewk Up Us Aiisri Working direction: right to left Max washable glass height: 1600mm Number of brushes: 4 (not for Low-e glass!) Drying fan Stainless steel cabin Water heating Backlighting Stop sensor The machine is in used condition as shown in the pictures, it can be viewed at our location!

Condition: ready for operation (used), Inkjet printer for frame bending machine Crsdshzgtuepfx Aiiji Length: 800mm Width: 1000mm Height: 1900mm Weight: about 100kg

Condition: new, Year of construction: 2026, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, actuation type: electric, rotational speed (max.): 3,100 rpm, rotational speed (min.): 700 rpm, total width: 1,487 mm, total length: 4,440 mm, total height: 2,793 mm, throat depth: 1,490 mm, overall weight: 1,900 kg, Equipment: CE marking, documentation/manual, NEW | YEAR 2026 | CE CERTIFIED | MADE IN POLAND | EXW €38,000 + VAT WHY THE PRIAM The Priam is a vertical, electronically controlled glass drilling machine that does most of the work for the operator. The entire feed is electronically controlled — drilling is smooth and repeatable. The operator's role is minimal. After mounting the hole saws, they press the "Calibration" button — the machine measures the length of both drills (front and rear) and their diameter, then automatically assigns the correct spindle speed. After every drill change, the machine will not start drilling until calibration is done — setup errors are impossible. The hole position on the vertical axis is entered on the monitor and the support bar travels there automatically (up to 1,060 mm below the spindle axis); horizontally, the glass is positioned against 6 stops. The machine does the rest: the pneumatic clamp measures the glass thickness, the rear spindle pre-drills to a depth calculated by the controller, and the front spindle completes the hole from the other side — chip-free, clean edges at the first attempt. Optional: double-sided chamfering (hole saw with chamfering ring), tapered holes, and pulse drilling mode for laminated (VSG) glass. BUILT FOR SERIAL PRODUCTION Up to 20 holes on the vertical axis can be programmed — the operator enters the dimensions once and the machine drills them automatically. In serial production (shower enclosures, balustrades) the following panes are drilled without re-entering positions. Cjdpfx Aijh Ek H Ssijri Drilling at position 0 on the support bar allows holes on the glass edge (half-moon cut-outs). Performance: a Ø 75 mm hole in 4 mm glass in approx. 25–30 s (feed in glass approx. 1 mm/s, speed set by the operator). Recommended: thin-wall, self-sharpening hole saws (e.g. Champion, L=75 mm). TECHNICAL DATA Drilling diameter range: Ø 5–80 mm (both drills same diameter) Glass thickness: 2–20 mm Max. pane size: 2,000 × 4,000 mm, up to 200 kg Support bar travel: up to 1,060 mm below spindle axis Holes on the glass edge (half-moon): yes, position 0 Drilling program: up to 20 holes on the vertical axis Spindle speed: adjustable 700–2,800 RPM, assigned automatically after calibration Feed: automatic, electronically controlled Cooling: closed water circuit, approx. 30 l Compressed air: 6 bar (pneumatic clamping) Power supply: 400 V / 16 A / 4 kW Machine dimensions (L × W × H): 4,440 × 1,487 × 2,793 mm Weight: 1,900 kg Scope of delivery: CE marking, documentation, operating manual MANUFACTURER, SERVICE, TERMS EXPOGLASS is a Polish manufacturer of glass processing machinery — built at our own factory in Nysa (in-house welding shop and powder coating). Service with online support; spare and wear parts available from stock. Delivery and commissioning across the EU, operator training on site. Delivery time: approx. 8 weeks. Warranty: 12 months. Visit our factory and see the Priam drill your own glass samples before you buy — video of the machine in operation in this listing. Glasstec 2026, Düsseldorf, 20–23 October, Hall 12, Stand 12A72.

Year of construction: 1994, condition: used, Grinding machine with pump but without water tank. Dimensions: Crjdpfxolp H D Ej Aiiji L = 4760 mm, D = 1050 mm, H = 2200 mm, Working height: 760 mm.

Year of construction: 1994, condition: used, Dimensions: H = 1600 mm L = 1200 mm Cedpfx Aiolp Iibeiori D = 1100 mm

Condition: good (used), Year of construction: 1994, Transport dimension: Width: 1500 mm, Depth: 1500 mm, Max. Height: 1550 mm, Weight: approx. 220 kg. Cedpfxem Rg Npe Aiijri

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, - High-pressure cleaner PTC Torpedo Compact 21/250, 21/350, and 15/500 – similar to, but not a Dynajet, Oertzen, Falch, etc. - Cold water/hot water at approx. 95°C and steam at 32 bar up to 140°C + high-pressure steam up to 150°C at 200 bar (only in versions with 250 and 350 bar) and a chemical-free weed control function with approx. 99°C. The following models are available: - Torpedo Compact 23/250 | 23 l/min. at 250 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter Cjdodqkrwepfx Aiieri - Torpedo Compact 23/350 | 23 l/min. at 350 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/500 | 16 l/min. at 500 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/250 PS (high-pressure steam) | 16 l/min. at 250 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/350 PS (high-pressure steam) | 16 l/min. at 350 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Dimensions and empty weight without water tank: 1205x1250x1330mm, approx. 280kg - Dimensions and empty weight with 300 l water tank: 1250x1900x1330mm, approx. 350kg - Dimensions and empty weight with 500 l water tank: 1250x1900x1330mm, approx. 350kg - 80/100 kW diesel burner with electronic temperature control - High-pressure pump: Comet RW/TW three-plunger pump with ceramic plungers - Operating hour counter - Manometer - Pressure regulator - Safety valve - High-quality frame made of painted steel with forklift slots - Covers made of stainless steel - Magnetic descaling device - incl. 20 m high-pressure hose, spray gun, lance, and flat jet nozzle 25° - Further accessories such as a frame for the water tank, water tank 300 or 500 l, water-sandblasting kit, surface cleaner, rotating nozzle, sludge suction pump, steam nozzle, weed control lance and bar available on request.

Year of construction: 2024, condition: new, functionality: fully functional, With the V.0102-gn, FOBA offers a marking laser in the green spectrum (532 nm wavelength) with low heat exposure. Thanks to 10 watts of laser power, markings can be applied with outstanding speed and contrast sharpness on surfaces that cannot be sufficiently marked with other wavelengths. This includes many white and transparent plastics, highly reflective metals and material combinations. Even red or orange plastic surfaces, which often offer poor contrast due to their color properties, receive perfectly legible codes and characters. The marking quality is also impressive on special plastics such as UHMWPE, HDPE and PMMA. In most cases, the green lasers also make laser additives superfluous. The FOBA V.0102-gn marking laser closes the gap between UV (355 nm) and fiber (1064 nm) laser systems and thus addresses the most challenging marking applications. The V.0102-gn is used in automotive and aircraft construction, as well as in medical technology, electronics, extrusion, but also in the marking of sensitive materials such as ceramics, flame-retardant plastics, plastics and materials for invasive purposes. Csdpfx Ajt Etkksiisri

Condition: like new (used), Washing brushes for Lenhardt glass washing machine 2,3m, Stock: 8 pieces, Cjdpfx Aijuig Ebsisri New brush rollers for Lenhardt / Bystronic glass washing machine 2,3m washing height

Condition: good (used), - All rubber rollers new or as good as new - Belt length 3000 mm - Year of manufacture Csdpeulvlkjfx Aiieri - Price On request

Year of construction: 2026, condition: new, ceramic ball mill ,Batch ball mill ,also called ceramic ball mill ,it is used for fine grinding of feldspar,quartz,clay,ore and so on.The ceramic ball mill is mainly used for material mixing, grinding,uniform product fineness,and saving power.It can be dry or wet.The machine can use different liner types according to production needs to meet different needs.The fineness of the grinding operation is controlled by the grinding time ceramic ball mill Working principle when ball mill working,steel balls inside drum will rotate with the drum to some height,and then steel balls fall down with materials to reach the point of grinding. Working Principle of Ceramic ball mill ceramic ball mill ,Intermittent ball mill grinding operation is finished in the cylinder body. When the cylinder rotates, materials ascend to a certain height and then fall along a certain path due to the balls' gravity. Two forces are generated on the balls inside. One is the force on balls through tangent direction; the other is a opposite force in the contrast to the diameter of balls, as a result of the force generated when the balls slide down. These two forces will constitute a couple for the steel balls. The balls are squeezed between the cylinder and the adjacent steel balls, so the couple can make unequal-sized friction force. The balls will orbit along with the cylinder axis and then fall down, which can produce a strong impact force on the ores in the cylinder body and, as a result, the ores will be crushed. In conclusion, the ores in the cylinder body are mainly crushed by composite effect of peeling force, impact force and extrusion force. Ceramic ball mill also named Intermittent ball mill which adopts the wet intermittent operation, is used for fine grinding and mixing the material such as feldspar, quartz, clay ceramic raw materials. The discharging and the mud size can through through 1000 sieve pore. This machine is high milling machinery, materials should be Broken in the fineness of the state into the grinding mill to get the highest efficiency and economic benefits. The cement mill is key equipment for the grinding process of the cement clinker after the crushing process of it. It is mainly used in the cement silicate product industry. After long term design and manufacture of the cement mill, our company now has series of cement mill with various specifications to meet with different requirement from our customers. Features of Cement Mill Our company adopts suitable transmission methods according to different specifications. We have brim drive and center drive as transmission form. The cylinder adopts new type step lining to increase the grinding area. And it is easily repairable and changeable. The new designed separate-chambered structure adopts flexible lifting blade and fixed lifting blade and it is easily fixed and repaired. Technical Details We have different models and options for different requirements, please contact us for more info. Codsvzx Auopfx Aiijri

Year of construction: 1997, condition: ready for operation (used), A complete Efco furnace system for the production of tempered safety glass is available. Heating capacity: 814.5kW, max. glass pane dimensions X/Y: 2400mm/4200mm, max. temperature: 750°C, total system length: approx. 25m. Components: loading section, furnace, cooling section, unloading section. Documentation available. An on-site inspection is possible. Credpfx Aijzdum Reioi

Condition: ready for operation (used), Year of construction: 1999, A Weier generator is available. Power: 1650kW, Voltage: 690V, Speed: 1575rpm, Design: B3, Current: 1517A, Power factor: 0.91, Insulation class: H, Lubricant quantity: 88cm³, Lubrication interval: 3600h, Weight: approx. 5900kg. The generator originates from an RCC plant, however without control or regulation electronics. The generator was completely overhauled, including rewinding and ceramic bearings. An on-site inspection is possible. Crsdpfxezd Eiis Aiisi

Year of construction: 2016, condition: ready for operation (used), A Lisec horizontal conveyor field is available. Pressure: 6bar, max. conveyor weight distribution: 50kg/m², weight: approx. 1450kg. Crodpfx Aietvgq Isioi

Year of construction: 2009, condition: ready for operation (used), A Mitsuboshi Diamond Industrial CNC glass cutting machine is available. Glass thickness range straight: 0.4mm-1.1mm, glass thickness range curve: 0.8mm-2.2mm, cutting range X/Y: 500mm/500mm, cutting speed: 500mm/s, cutting accuracy straight: +/-40µm, cutting accuracy curves (depending on radius): +/-100µm. Machine dimensions X/Y/Z: approx. 1100mm/1900mm/1600mm, weight: approx. 1000kg. Documentation available. On-site inspection is possible. Cedpfxewihzue Aiiori

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, This vertical machining center, including the "Clamex unit," is for sale and has only a few operating hours. The machine is being sold because we have switched to a nesting machine. In 2021, the machine was upgraded with a more powerful vacuum pump (16.3 m³). The machine also includes various vacuum clamping devices; we purchased several larger plates in addition to the standard equipment. Workpiece size: X = 200 - 3200 mm (longer with additional support) Y = 70 - 1200 mm (= max. clearance) Material thickness: Z = 8 to 70 mm Max. contour milling dimension in the X-direction without clamping: X = 1500 mm Max. contour milling dimension in the Y-direction: Crjdsz In Ugspfx Aiiei Y = 985 mm ./. milling cutter radius Max. drilling dimension horizontally in the X-direction: H = 1168 mm Z-axis travel: Z = 240 mm Maximum programmable speed: Vector speed: 68 m/min X = 25 m/min, Y = 60 m/min, Z = 20 m/min Milling head 7830, power: 7.5 kW (S6), air-cooled with HSK-F 63 tool holder n(max.) = 1000 - 24,000 min-1, continuously adjustable with collet chuck with HSK shank, ceramic ball bearings (hybrid bearing), tool weight max. 6 kg (incl. holder) Tools: max. Ø 110 mm, tool length max. 80 mm Tool changer 7887, 6-position magazine - pick-up system, pneumatic Max. Ø tool: Ø 110 mm Maximum tool weight: > 5 kg per tool or 30 kg when fully loaded Can be equipped with collet chuck with HSK shank Tool changer 7874, 1-position aggregate magazine, swiveling in X and Y direction, only for special bevel gear 7869 with HSK holder Vertical spindles can be individually activated Arrangement in L-shape, 5 in X and 4(5) in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from the mounting end (depending on plate thickness) Spindle extension stroke: 70 mm Rotation direction: Alternating clockwise/counterclockwise n(max.) 1000 - 4400 min-1, continuously adjustable Holder: M 10 thread - interference fit 11 mm without tool, without holder 6 horizontal spindles 2 double drilling spindles in X direction 1 double drilling spindle in Y direction Holder: M 10 thread, interference fit 11 mm Total drill length max. 63 mm from the mounting end without tool, without holder Sawing unit Integrated sawing unit for sawing/grooving in X direction n(max.) 1000 - 5650 min-1, continuously adjustable Tool holder: A max Ø = 120 mm, I Ø = 20 mm, B = max. 4.0 mm 4-axis "CLAMEX" tool set - Includes original tool set consisting of 2 pcs. P-system grooving cutter, DP (diamond) 100.4x7x30mm, Z3, NLA 4/6,6/48mm 1 pc. Milling mandrel for P-system grooving cutter S20x50mm, d=30, L=102, DTK 48mm 1 pc. Milling mandrel for P-system grooving cutter S16x55mm, d=30, L=68, DTK 48mm 1 pc. CNC drill 6mm for Clamex P L= 57.5 / shank 10x27 / left 1 pc. Adapter for drill with shank d= 10 mm (left) 1 pc. Collet DIN 6388 form B, double slit, size 25 Clamping diameter 20, for HSK-F 63 holders Drilling unit: Drill Ø5, 6, 8 mm 35mm pot band 20mm countersink Drill horizontally + vertically: 8mm Milling cutters: 8mm Dia NL32mm 16mm Dia NL43mm 16mm Dia NL9mm 20mm insert NL55mm