Used Ceramic for sale (1,025)

Condition: new, Year of construction: 2025, power: 7.5 kW (10.20 HP), Batch ball mills find applications in various industries where the processing of materials in discrete batches is required. The versatility of batch ball mills makes them suitable for a range of applications. Here are some common batch ball mill applications: 1. Ceramics Industry: - *Glaze Preparation:* Batch ball mills are extensively used in the ceramics industry for preparing glazes. Raw materials such as feldspar, quartz, and clay are ground with ceramic balls to achieve the desired particle size for glaze formulation. 2. Chemical Industry: - *Material Grinding:* Batch ball mills are used for grinding and blending various chemical materials. This includes the production of pigments, dyes, and other specialty chemicals where precise particle size control is crucial. 3. Pharmaceuticals: - *Drug Formulation:* In pharmaceutical manufacturing, batch ball mills are used for grinding and blending powders to create drug formulations. The controlled environment provided by these mills is essential for maintaining the integrity of pharmaceutical compounds. 4. Food Industry: - *Ingredient Mixing:* Batch ball mills may find application in the food industry for mixing and grinding ingredients. This can include the production of food additives, flavorings, and other powdered or granular products. 5. Mining and Minerals Processing: - *Ore Grinding:* Batch ball mills are used in mining and minerals processing for grinding minerals and ores. The controlled grinding helps in obtaining the desired particle size for subsequent processes, such as mineral separation or extraction. 6. Paints and Coatings: Bwodsq I N H Nopfx Abbsh - *Pigment Dispersion:* In the paints and coatings industry, batch ball mills are employed for dispersing pigments into paint formulations. Achieving a uniform particle size is crucial for the quality and appearance of the final coating. 7. Building Materials: - *Raw Material Grinding:* Batch ball mills are used in the preparation of raw materials for the production of building materials, such as cement and concrete. Grinding of materials like limestone and clay helps in obtaining the desired fineness for subsequent processes. 8. Electronic Materials: - *Ceramic Powder Processing:* In the electronics industry, batch ball mills can be employed for processing ceramic powders used in the production of electronic components and insulating materials. 9. Research and Development: - *Material Testing:* Batch ball mills are often used in research and development laboratories for testing and optimizing material formulations. They provide a controlled environment for small-scale processing and experimentation. 10. Customized Applications: - *Specialized Processes:* Batch ball mills can be adapted for various specialized processes in different industries where precise grinding and mixing are required. Custom modifications can be made based on specific application requirements. When using a batch ball mill, it's important to consider factors such as the type of material being processed, desired particle size, and the specific requirements of the end product. Additionally, following the manufacturer's guidelines and maintaining proper operating conditions are essential for efficient and effective milling processes.

Condition: used, FICOLA furnace for ceramic 5m³ with tiles with wagons(1+1) with forklift truck handling wagons Bodpfx Ajv Upwcjbbowh

Condition: used, FICOLA ceramic kiln 20m³ with tiles with wagons(4+4) with forklift truck handling wagons Bwsdpfx Absv Upvljbjh

Year of construction: 1981, condition: good (used), wet mixer, batch mixer, liquid mixer, chemical mixer, drum mixer -Manufacturer: KWH VEB, wet mixer with ceramic drum Bwedjvmq Iyspfx Abbeh -Type: 2841.5.7521 -Drum capacity: 100 liters -Drum speed: 38 rpm -Motor: 1.1 kW -Dimensions total: 1520/670/H930 mm -Weight: 487 kg

Condition: used, Ceramic backings for wire electrode, welding wire, welding wire -Weight: 10.2 kg Bwsdpfxsd Idwfe Abbsh -Number: 1x packages available -Price: per package -Weight complete: 10.2 kg/package

Condition: used, total length: 40 mm, total width: 40 mm, total height: 40 mm, Ceramic grinding media pyramid Spaleck 40mm 3 bags, total weight 76.5kg Bedpfsx Eczlox Abbjwh Grinding media, ceramic grinding media, polishing media for vibratory finishing systems, trowalizing systems Condition: used, good

Condition: new, Year of construction: 2026, Discover our extensive range of high-quality and cost-efficient ceramic abrasive media for processing workpieces made of steel, stainless steel, or other hard materials. Ceramic abrasive media are known for their outstanding durability. Bjdpfx Abjx A Elbsbjwh Ceramic abrasive media are particularly suitable for machining hard materials, such as steel, but are also ideal for deburring aluminum components. Thanks to their higher weight, they exert increased pressure on the workpiece, ensuring excellent grinding performance. Compared to plastic media, ceramic media are significantly more durable and cost-effective. When selecting the appropriate abrasive media, finding the optimal combination of grinding performance, surface finish, geometry, and size is crucial. - Triangles & triangle-angle cut (D & DS): Perfect for deburring due to their edges, but also reach a variety of complex areas on the workpiece. - Tridents (DZ): Also access difficult-to-reach areas, such as grooves or gears. - Cylinders & cylinder-angle cut (Z & ZS): Their round shape makes them ideal for achieving a uniform surface finish during applications like polishing. Their slim design also makes cylinders easy to separate. - Ellipses & ellipse-angle cut (E & ES): Also suitable for polishing and smoothing; thanks to their corners, they can reach deeper sections of the workpiece. - Wings (W): Combine the advantages of triangles and tridents. Their 'wings' allow access to complex areas, while their compact shape and edges are ideal for deburring, applying good pressure to the workpiece. If you are interested, we look forward to hearing from you. We will be happy to provide you with advice, free of charge and without obligation. The European Commission provides a platform for online dispute resolution (ODR platform) for out-of-court settlements. This offer serves solely as an internet presentation of our goods. Contract negotiations are concluded via telecommunications (email, telephone, message portal). In the first step, we will send you a non-binding offer, informing you at the same time about our terms and conditions—including imprint—and your right of withdrawal, before any purchase or conclusion of contract is made.

Condition: like new (used), Year of construction: 2001, functionality: fully functional, Ceramic measuring plate from Johannes Fischer Aschaffenburg in laboratory quality, 1000x1000mm Flatness less than 1µm (!) Incl. cabinet base with 2 doors Measuring protocol on request for an extra charge Bwsdpfx Aeix Ahqobbjh

Condition: excellent (used), Year of construction: 2019, Digital ceramic printing system for flat glass. Max. glass size: 2400 x 4200 mm. Working height: 940 mm. Total length: approx. 5630 mm. Max. Width of the machine: approx. 4800 mm. Available from approx. end of January 2024. Bwedpfx Aboqlapzsbjh

Condition: good (used), Weld studs, ceramic rings, tip ignition studs, head studs -Welding studs: with ceramic rings, 40 different types Quantity/Version: see photo parts list Bodpfxsmxpt Ij Abbowh -Delivery/Price: only complete set -Dimensions: 1200/800/H120 mm Total weight: 64 kg

Condition: ready for operation (used), functionality: fully functional, Vita ZYrcomat Firing Furnace / Firing Device / Ceramic Furnace High-temperature firing device for the VITA In-Ceram® technology. The VITA ZYrcomat T is a specially developed firing unit for atmospheric high-temperature sintering firings. Atmospheric long-term high-temperature sintering firings for frameworks made of zirconium dioxide and aluminum oxide. Technical Data Dimensions: Firing device: W × H × D = 360 × 810 × 490 mm Power unit: W × H × D = 500 × 210 × 350 mm Weight: Firing device: 32 kg Housing with power unit: 27.5 kg Firing chamber (useable space): Diameter: 84 mm Height: 90 mm Firing chamber temperature: max. 1600 °C Electrical Data Electrical connection: 230 V AC, 50 Hz Power consumption: max. 1500 W Classification: Protection class 1 Bodpfxoxgb Nqs Abbjwh Good working condition. Please chech out out other listings as well.

Year of construction: 2018, condition: used, Horizontal kiln for ceramic slabs + fumes purifier for loading slabs 1800 mm Bwedpfsx Ag H Hox Abbjh length 140 meters

Condition: used, Stock of ceramic products from bankruptcy of importer. Originally about 3 full containers. Currently, at least 2 containers/truckload are needed. Bedpfx Aboxa Einebowh

Condition: new, New ceramic rollers for tempering furnace for flat glass VESUVIUS long 3049 diam. 85 mm 46 pieces x 400€ = 18.400 € Bjdpfx Abjtz T Rvebowh

Condition: new, Sanding belt width: 150 mm Bwsdpfxegzvu Ue Abboh Sanding belt length: 2000 mm Grain size: 60

Year of construction: 2003, condition: excellent (used), Press-in device for ceramic pins in rotor shafts Principle of operation: The ceramic pins are fed by means of an oscillating conveyor pot via a pneumatic hose to an inspection station in which the position of any one-sided hole is checked. This is done with an optical sensor. Incorrectly positioned parts are conveyed by a pneumatic slide into a collecting container. Pins in the correct position are fed through another pneumatic tube to the separator of the press-fit tool. The actual press-fit process is also performed pneumatically with a punch guided by a roller bearing. First, a manually adjustable pressure p1 is used to check that the pin is not pressed too lightly into the shaft. A pressure p2, which is also manually adjustable, then presses the pin into the rotor shaft as far as it will go. A disk spring package preloaded with 5,000 N prevents excessive force from being exerted on the pin and shaft. The rotor shaft must be manually inserted into the die, removed and clamped by an operator. This process is safeguarded by a light curtain. Design Self-supporting station integrated in complete system for pressing in ceramic pins and balls. Rotor shafts Ø: 5 - 20 mm L: 50 - 200 mm Ceramic pin Ø: 3 mm L: 5 +/- 0,2 mm Working cycle Power: 15 strokes per minute Safety safety door with safety switch Category 4 light curtain Emergency off Airborne sound emission Continuous sound pressure at the workplace: 70 dB (A) Electrical connection Voltage: 230 V AC Frequency: 50 Hz Fuse. 10 A Compressed air connection Operating pressure: 5 - 7 bar Dimensions L x W x H = 850 x 950 x 1020 mm Weight: approx. 110 kg Year 2003 Electrically height adjustable work table Bsdpeib H U Defx Abbjwh Documentation and wiring diagrams are available

Condition: new, 4 x Ceramic Jacketed Radiant Tubes 514736 Bwodpfx Aboghrmajbeh 4 x Ceramic Jacketed Radiant Tubes 514736 L = 1520 mm OD = 128 mm Find more items - new and used - in our shop! International shipping costs on request!

Year of construction: 2018, condition: new, FireMaster Morgan Thermal Ceramics FireMaster® Marine Plus FM-MP69/16X14640X610S SUPER DISCOUNT! 19 Euro pallets available 16 boxes on each euro pallet x 19 euro pallets = approximately 304 boxes Material dimensions: Thickness 13 mm Width 620 mm Length 14,640 mm Density kg / m3: 96 Price per box 100 EUR + VAT Bjdpfx Ash Rawusbbewh In total there are about 304 boxes. Total price 30,400 Euro + VAT, negotiable , FCA: Satu Mare / Romania Manufactured from FireMaster® Plus fibre, FireMaster® Marine blanket is a highly insulating blanket especially developed for fire protection Plus applications that are very space or weight sensitive Classification temperature FireMaster® Marine Plus blanket: 1200°C (2192°F) Fire reaction properties Non-Combustible in accordance with IMO FTP Code Part 1 Index < 0.5 when tested in accordance with UK MOD Defence Standard 02-713 Class A1 Reaction to Fire in accordance with EN 13501-1 Thermal insulation performance Thermal insulation at ambient temperatures R Values (m² K/W) and corresponding U values (W/m²K). For densities above 80 kg/m³ the values for 80 kg/m³ may be used Basis Thermal conductivity measured at 10°C using BS EN 12667 method 48 kg/m³ 0.0321 W/mK 64 kg/m³ 0.0319 W/mK 70 kg/m³ 0.03164 W/mK 80 kg/m³ 0.03144 W/mK Thermal conductivity at high temperatures Thermal conductivity (W/mK) at mean temperature measured using ASTM C201 method Please check the attachment with the technical data. We reserve the right to make mistakes, changes and prior sale Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: ready for operation (used), Year of construction: 2019, operating hours: 336 h, functionality: fully functional, total length: 4,764 mm, edge thickness (max.): 8 mm, overall weight: 1,840 kg, controller model: Maestro Pro Edge, Edge banding machine with only 336 operating hours & comprehensive accessories! TECHNICAL DETAILS Max. edge thickness: 8 mm MACHINE DETAILS Control: Maestro Pro Edge Bjdpfx Aboydc Abjbowh Electrical Data Voltage: 400 Volt Frequency: 50 Hz Dimensions & Weight Machine length: 4,764 mm Weight approx.: 1,840 kg Operating hours: 336 h Edge Banding Machine Configuration: Flush trimming and scraper unit, radius: 1 mm Flush trimming and scraper unit, radius: 2 mm Spraying unit for edge finishing Spraying unit for delicate edges Surface scraper "RC-V" Brushing unit "SP-V" "SAVENERGY" kit "EASY SIZE" device Internal lighting for the enclosure and gluing area Ceramic lamp with infrared rays Electronic positioning of the pressure rollers Spare adhesive tank "SGP" with NC dosing system Additional adhesive tank "SGP" with NC dosing system Manual feed "Nesting" tracing rollers Diamond tools H=64 for pre-milling unit, 2 teeth Base

Condition: used, Year of construction: 2007, functionality: fully functional, LISEC PVB Lamination Line Composed of: TERRUZZI Autoclave – Year 2007 Washing Machine LISEC HVM26B6 – Year 2015 Bwodpfxjyha H So Abbeh White Room Mangle Dimensions: 6000x3000 mm

Condition: used, Year of construction: 2008, BOTTERO 520 LAM-37 - Year 2008 Cutting table for laminated glass Fixed worktop with flap Air cushion support Max. cutting length: 3700 mm Min. cutting length: 250 mm Bwodpsxqyu Tofx Abbjh Thickness: 3-10 mm (monolithic) 2+0.38+2 mm min. (laminated) 8+4.56+8 mm max. (laminated) Speed: 100 m/min Installed power: 15 kW

Condition: used, Year of construction: 2011, BOTTERO 535 AVM-37 – Year 2011 Laminated Glass Cutting Table Bwedpsx Hwausfx Abbjh Low-E Max Cut: 3700 mm Thickness: Float: 3-8 mm Laminated: (2+2) (8+8) mm Power: 23 kW

Condition: used, Year of construction: 2011, functionality: fully functional, BOTTERO CUTTING LINE BOTTERO 507/CBM – Year 1997 Double-sided loader Bjdpfsygh Uzex Abbewh 6 positions per side Maximum dimensions: 3650 x 2750 mm Thickness: 2–19 mm + BOTTERO 340 BCS-J EVO – Year 2011 Jumbo Max glass size: 6100 x 3300 mm Thickness: 3–25 mm Speed: 140 m/min Precision: ±0.15 mm Power: 16 kW + BOTTERO 100 BBM-J – Year 2011 Loading table Max dimensions: 6100 x 3300 mm Overall dimensions: 7000 x 3660 mm Thickness: 2–19 mm

Condition: used, Year of construction: 2004, functionality: fully functional, BOTTERO 530 AVM – Year 2004 Automatic cutting table for laminated glass with thermal separation Bedpsyf Id Hofx Abbjwh Max cut: 4,600 mm Thickness: 3+3 to 10+10 mm Precision: ±0.3 mm Pneumatic pressure: 6/8 bar Power supply: 400 V / 50 Hz / three-phase

Year of construction: 2009, condition: ready for operation (used), travel distance X-axis: 2,500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 410 mm, controller manufacturer: SIEMENS, controller model: 840D SL Sinumerik, overall weight: 20,000 kg, total height: 2,600 mm, spindle motor power: 45,000 W, product length (max.): 5,200 mm, spindle speed (max.): 4,000 rpm, table load: 4,000 kg, number of axes: 5, This 5-axis HABRAMA PPSM 2200 was manufactured in 2009. It features a robust workbench of 390 x 3750 mm, supporting a maximum table load of 4000 kg. The grinding head offers a drive power of 45 kW and a spindle speed of up to 4000 rpm. With a total power consumption of 100 kVA and a weight of 20,000 kg, this machine ensures precision and efficiency for complex grinding tasks. Contact us for more information about this machine. • Axes and travels Bjdpfx Asyf Hcuebbjwh • C-axis: +30° / -30° • B-axis: +20° / -20° • U-axis: 105 mm • W-axis: 125 mm • B2-axis: +20° / -20° • Worktable • Workbench size: 390 x 3750 mm • Feed speeds • X-axis: 21 m/min • Y-axis: 10 m/min • Z-axis: 6 m/min • C-axis: 2 m/min • B-axis: 6 m/min • U-axis: 4 m/min • W-axis: 4 m/min • B2-axis: 6 m/min • Grinding head • Grinding wheel mount: 100 mm H5 • Programmable constant cutting speed: 10–80 m/s • Grinding wheel type: ceramic or resin bonded • Max. grinding wheel width: 101 mm • Grinding wheel diameter: 210–400 mm • Grinding wheel bore: 152.4 mm (6") • Grinding range: up to module 22; custom profiles freely programmable • Total machine power consumption: 100 kVA Additional equipment • Hybrid clamping device/plates (workholding) • Coolant system approx. 4000 liters with integrated deep-bed filter