Used Central Lubrication for sale (12,103)

Condition: good (used), mileage: 700,129 km, power: 310 kW (421.48 HP), first registration: 09/2015, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 6x4, wheelbase: 4,500 mm, fuel: diesel, brakes: retarder, color: orange, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel, total length: 9,700 mm, total width: 2,550 mm, total height: 3,900 mm, loading space length: 6,130 mm, loading space width: 2,500 mm, loading space height: 1,000 mm, Year of construction: 2015, Equipment: ABS, air conditioning, central locking, crane, cruise control, electric window regulation, power mirror, retarder, traction control, trailer coupling, - Digital tachograph - Tachograph (control device) - Fixed - Short cab - PTO (power take-off) - Pump - Central lubrication - Additional brake system Number of axles: 3, Configuration: 6x4, Unladen weight: 15,810 kg, Gross weight: 26,000 kg, Total fuel tank capacity: 390 liters, Trailer coupling, Kingpin diameter: 40 DIN, Fifth wheel coupling: Fixed, Number of diff locks: 2, Central lubrication, Suspension type: Leaf suspension, Cab type: Short cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Radio/cassette, Color: Orange, Heated mirrors, Lighting type: Halogen lamp, Seat heating, Bluetooth, Blind spot sensor, Engine power: 310 kW (416 Hp), Fuel: Diesel, Emission standard: Euro 6, Transmission: Telligent, Gearbox make: Mercedes Benz, Gears: 12, Additional brake system, Retarder make: Voith, Power steering, ABS, ASR, PTO (power take-off), PTO type: 1, Starter battery, Pump, Central locking, Seating configuration: 1+1, Seat material: Fabric, Seat adjustment: Manual, Crane, Crane make: HLK 221 a2 V, Crane year: 2015, Crane capacity: 22, Maximum load: 1,880 kg at 10.85m, Number of support legs: 2, CE-certified, Control position: upper controls, Crane position: rear, Sliding: 2, Hydraulic extra connection: none, Stone grab Transmission Transmission: MB, 12 gears, Automatic Axle configuration Tyre size: 315/80R22.5 Brakes: disc brakes Suspension: leaf suspension Axle 1: steering; left tyre tread: 10 mm; right tyre tread: 10 mm Axle 2: twin tyres; inner left tread: 18 mm; outer left tread: 18 mm; inner right tread: 18 mm; outer right tread: 19 mm Axle 3: twin tyres; inner left tread: 15 mm; outer left tread: 16 mm; inner right tread: 15 mm; outer right tread: 16 mm Weights Unladen weight: 15,810 kg Payload: 10,190 kg Gross vehicle weight: 26,000 kg Kjdpfx Ahsx Dh T Rs Nedg Functional Crane: HLK 221 a2 V, year 2015, mounted at rear of chassis Load platform height: 142 cm Pump: Yes Condition Technical condition: good Visual condition: good Damage: none Number of keys: 1 Identification Registration: KLEYN1 Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands, years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing inventory • Recognizable quality • Good pricing • Fair business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration plates are quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and our complete stock: Leasing via Kleyn Trucks possible in most European countries! Quickly calculate your leasing rate and submit a request via our website. Ask us directly about our...

Condition: excellent (used), WEINIG HYDROMAT 22 AL Four-Sided Planer - Maximum workpiece width: 220 mm - Maximum workpiece height: 130 mm - 8 spindles: 1) Lower horizontal: 220 mm, 5.5 kW 2) Right vertical: 130 mm, 7.5 kW 3) Left vertical: 130 mm, 7.5 kW 4) Right vertical: 130 mm, 5.5 kW 5) Upper horizontal: 220 mm, 11 kW – 5th spindle with electric height adjustment (up/down) 6) Lower horizontal: 220 mm, 5.5 kW 7) Lower horizontal: 220 mm, 5.5 kW – 7th spindle with support + Jointer system (cutterhead sharpening) 8) Universal spindle: 220 mm, 360° adjustable, 7.5 kW - All spindles adjustable up/down, left/right - Spindle diameter: 40 mm - From above: - 6 dual toothed feed rollers + 1 single roller - 3 dual smooth rubber outfeed rollers + 3 single rollers - Meter counter - From below: - Swiveling toothed steel infeed roller integrated in lower table - 3 smooth steel feed rollers - Feed via cardan drive rollers - Pneumatically-tensioned feed rollers - Stepless feed speed adjustment + 2-speed gearbox: 10–60 m/min - Feed motor: 10 kW - Electrically adjustable planing thickness - Lifting motor: 0.75 kW - Central table lubrication - Extraction port diameters: 5 x 140 mm, 3 x 120 mm - Machine dimensions (LxWxH): 4680 x 1780 x 1850 mm - Control cabinet dimensions (on pallet): 1020 x 1000 x 2230 mm - Approx. weight: 5,000 kg Feeder with centering device: - Roller width: 450 mm - 1 toothed powered infeed roller - 22 smooth powered rollers - Adjustable upper pressure - Feeder length: 9,020 mm - Stepless speed adjustment: 10–60 m/min - Motor: 0.75 kW Kdedpfx Aeya Hiqeh Nog - Dimensions (LxWxH): 9,020 x 790 x 1,150 mm Net price: 180,000 PLN Net price: 42,860 EUR (based on 4.2 EUR/PLN exchange rate) (Prices subject to change depending on exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7804 TECHNICAL DATA - Track width: 350mm - Shaft width: 330mm - Mounted blade: 300mm - Max blade diameter: 400mm - Blade bore diameter: 70mm - Max cutting height with 400mm blade: 150mm - Table dimensions: 2240x770mm – From above: - kickback/retractors - slip roller - retractors - smooth slip roller - shaft with saw blades - 2 slip and pressure shafts – From below: - roller in front of the table - guide - pawls - track - central track lubrication - electric raising of saw blade shaft 0.75kW - electric raising of machine body 0.75kW - variable feed speed adjustment - Extraction nozzle diameter: 320mm - Main motor: 45kW - Overall dimensions (L/W/H): 2280x1820x2040mm - Weight: 2850kg ADVANTAGES – Czech production – Used multi saw machine Kdjdpoxvb S Rofx Ah Nsg – Technical documentation (DTR) – Very good condition Net price: 62,900 PLN Net price: 14,970 EUR depending on EUR rate 4.2 (Prices may change with significant fluctuations)

Condition: used, Year of construction: 2007, feed length X-axis: 400 mm, feed length Y-axis: 350 mm, feed length Z-axis: 400 mm, travel distance X-axis: 400 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, quill travel distance: 60 mm, table load: 250 kg, Equipment: documentation/manual, Used universal milling and drilling machine Kunzmann WF 4/3 Heidenhain Position Control TNC 124 Travel X/Y/Z = 400/350/400 mm Infinitely variable speed 1-4000 rpm Spindle SK40 DIN 69871 (Form AD) with drawbar according to DIN 69872 Horizontal and vertical spindle Fixed angle table 650 x 350 mm, 6 x 14 H7 T-slots Coolant system Electronic handwheel HEIDENHAIN HR 410 HEIDENHAIN KW130 probe system with cable Chip splash guard cabin, hydraulic tool clamping, central lubrication. Machine folder with operating manual and control user manual included. Further technical data available upon request. The machine is located at our facility in 71334 Waiblingen-Beinstein, is immediately available, and can be inspected by appointment. Please contact us in advance to arrange a visit. Kdodpjya Hrljfx Ah Nsg

Condition: ready for operation (used), Year of construction: 2003, controller manufacturer: SIEMENS, controller model: SINUMERIK, total height: 2,450 mm, table width: 325 mm, table length: 850 mm, table load: 150 kg, spindle speed (max.): 5,000 rpm, spindle motor power: 9,000 W, number of axes: 3, This Emco VMC 300 Vertical Machining center was manufactured in the year 2003 in Austria. It is equipped with a SIEMENS SINUMERIK control unit. Additional equipment • Max Torque: 100 Nm (at 5000 RPM), 78 Nm (at 8000 RPM option) • Tool Change Time: T1: 5.8 s, T2: 3.9 s, T3: 3.9 s // Span-to-span Time (VDI 2852): T1: 8.9 s, T2: 7.0 s, T3: 7.0 s • Coolant System: Tank capacity 100 liters / Flow rate 10 l/min / Max delivery pressure 3.7 bar / 4 external nozzles • Lubrication System: Automatic central lubrication for guideways and ball screw spindle / Grease lubrication for main spindle bearings • Pneumatic Connection / System pressure 5 - 10 bar • Minimum air flow 750 l/min / Average air consumption 180 l/min • Electrical Connection: Power supply 3/PE ~ 400 V 50/60 Hz / Connected load 15 KVA / Main fuse 35 A slow-blow Machine Benefits Technical Machine Benefits • Qualitative machine benefits: • Reliable tool change system with 12 stations • Integrated automatic lubrication system for guideways and ball screw spindles Technical Specification Kdodpfx Ahjya Hg Ns Nog Taper Size SK 40 Dimensions Machine Depth 2300 mm

Condition: ready for operation (used), Year of construction: 2009, total height: 2,370 mm, overall weight: 2,500 kg, product length (max.): 2,850 mm, This 4-axis DMG Lasertec 40 laser engraving machine was manufactured in 2009. It features a picosecond laser with an average power of 6W and a wavelength of 1064 nm. The machine offers a travel range of X=400 mm, Y=300 mm, and Z=500 mm, with maximum feed rates of 15 m/min for X and Y axes and 12 m/min for the Z axis. Consider the opportunity to buy this DMG Lasertec 40 laser engraving machine. Contact us for more information. • Machine footprint (incl. operation/maintenance with extraction): Depth 3.5 m, Width 3.0 m, Height 2.5 m • Weight with X-Y table: approx. 2,500 kg • Machine power consumption (with laser and cooling unit): 16 kVA • Fuse: 40 A at 400 V • Operating voltage: 3/N/PE/400 V/230 V 50 Hz • Maximum permissible deviation: ±10% • Control voltage: 24 V DC • Permissible ambient temperature: +15°C to +35°C Kdjdpfx Aeya Ah Ash Nog • Permissible relative humidity: max. 75% at 20°C • Travel range (with X-Y table): X = 400 mm (longitudinal), Y = 300 mm (transverse), Z = 500 mm (vertical) • Table size: 400 x 300 mm • Feed drive: Digitally controlled AC motor and ball screw in each linear axis • Maximum feed rate: X/Y: 15 m/min; Z: 12 m/min • Guides: Ball screw guides in all linear axes • Measuring systems: X, Y, Z indirect linear encoder • Machine accuracy: P = 0.010 mm (VDI/DGQ 3441) • Laser type: Picosecond laser • Average laser power: 6 W • Wavelength: 1064 nm • Scanner: Planar field lens; focal length 163 mm; field size 65 x 65 mm • Lubrication: Manual central lubrication • Electrical control cabinet: with cooling unit (integrated into the machine) • Cabin: Fully enclosed cabin including roof; laser safety screen (optionally multiple); optimal operator access

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 800 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 450 mm, controller manufacturer: FANUC, controller model: 31i-B5, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, tool weight: 8,000 g, number of axes: 5, This 5-axis CHIRON FZ18W was manufactured in 2019, featuring a FANUC 31i-B5 control system and continuous 5-axis control. It boasts a spindle speed of up to 12,000 rpm, a tool capacity of 70, and rapid traverse rates of 75 m/min. Ideal for complex machining tasks with its automatic pallet changer and dual rotary tables. If you are looking to get high-quality milling capabilities consider the CHIRON FZ18W machine we have for sale. Contact us for more information. • Number of axes: 5 (X, Y, Z + 2 rotary axes via pallet/rotary table) • Spindle: • AC spindle motor: 7.5 kW (100% duty), 22.0 kW (10% duty) • Max torque: 140 Nm • Taper: HSK-A63 (DIN 69893) • Drilling capacity: Ø 42 mm • Tapping capacity: M30 • Milling capacity: 500 cm³/min (steel E355) • Tool changer: • Type: Fully enclosed chain magazine • Capacity: 70 tools • Max tool Ø: 78 mm (160 mm with free adjacent positions) • Max tool length: 380 mm • Max magazine load: 240 kg • Tool change time: ~0.9 s • Chip-to-chip time: ~2.6 s • Feed rates & dynamics: • Rapid traverse (X/Y/Z): 75 m/min • Acceleration: 0.6 – 1.2 – 1.4 g • Drives: Direct digital drives with absolute measuring system • Machine functions/utilities: • Automatic washdown of work area and fixtures • Automatic centralized grease lubrication • Hydraulic unit: 200 bar • Compressed air treatment with filtration to 0.01 µm • Cooling unit for machine components • Measuring, monitoring, software: • FANUC 3D collision control • Tool monitoring and sister tool management • Electrical & interfaces: • Ethernet RJ45, USB, PCMCIA • Remote diagnostics: CHIRON remoteLine • Data monitoring & OEE: CHIRON dataLine • Compliance: CE Additional equipment (robots, automation, peripherals) • Automation/palletizing: • Automatic pallet changer IWV 0°/180° (change time ~3.5 s) • Rotary table ATU 200, 2 units • Positioning accuracy/repeatability: ±5″ • Max clamping torque: 1,200 Nm • Max load per side (APC): 250 kg • Max weight difference between pallets: 0 kg • Coolant and chip management: • Through-spindle coolant (predisposition) Kodpfx Ahjyaz Emo Nedg • High-pressure coolant system up to 30 bar • Coolant filtration: Drum filter TPF 350 S (50 µm) • Chip conveyor: Hinged belt • Coolant tank: 230 L • Pump: 250 L/min @ 1.4 bar • Probing/tool control: • Renishaw RLP40Q probe (predisposition) • Laser tool breakage control (Single F1000)

Condition: good (used), mileage: 662,924 km, power: 294 kW (399.73 HP), first registration: 07/2010, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 6x4, wheelbase: 3,650 mm, fuel: diesel, color: red, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro5, suspension: steel, total length: 7,850 mm, total width: 2,550 mm, total height: 3,500 mm, Year of construction: 2010, Equipment: ABS, air conditioning, cruise control, electric window regulation, power mirror, trailer coupling, = Additional Options and Equipment = - Digital tachograph - Tachograph (control device) - Short cab - PTO (Power Take-Off) - Pump - Central lubrication system = Notes = Number of axles: 3, Configuration: 6x4, Curb weight: 9,485 kg, Gross weight: 26,000 kg, Total tank capacity: 380 liters, Trailer hitch, King pin diameter: 40 DIN, Number of diff locks: 2, Central lubrication, Suspension type: leaf suspension, Cab type: short cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Radio/Cassette, Color: red, Heated mirrors, Reversing camera, Lighting type: halogen lamp, Speed limiter, Climate control, Flashing lights, Engine power: 294 kW (394 HP), Fuel: diesel, Euro: 5, Gearbox type: AS-Tronic, Transmission: ZF, Speed limiter, Gears: 12, Power steering, ABS, PTO (Power Take-Off), PTO type: 1, Starter battery, Body year: 2010, System length: 450 cm, System type: HIAB XR21S46 W-O-L, Pump, Hooklift unit height: 132, Seat layout: 1+1, Seat upholstery: fabric, Seat adjustment: manual Kdodpfow D Rkzex Ah Njg = Further Information = Transmission Transmission: ZF, 12-speed, automatic Axle Configuration Suspension: leaf suspension Axle 1: Tire size: 385/65R22.5; Steered; Tread depth left: 4 mm; Tread depth right: 3 mm; Brakes: disc brakes Axle 2: Tire size: 315/80R22.5; Twin tires; Tread depth left inside: 5 mm; Left outside: 4 mm; Right inside: 10 mm; Right outside: 7 mm; Brakes: drum brakes Axle 3: Tire size: 315/80R22.5; Twin tires; Tread depth left inside: 7 mm; Left outside: 6 mm; Right inside: 2 mm; Right outside: 6 mm; Brakes: drum brakes Weights Unladen weight: 9,485 kg Payload: 16,515 kg GVW: 26,000 kg Functional Loading platform height: 135 cm Pump: Yes Condition Technical condition: good Optical condition: good Damages: none Number of keys: 2 Identification Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the world’s largest independent dealerships for used vehicles. Here, you can select from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our offerings include all European brands, years of manufacture, and price ranges. Why buy at Kleyn Trucks? Simple! • Large, rapidly changing inventory • Recognizable quality • Fair pricing • Proper business conduct • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Professional technical services • The security of "recognizable quality" • And much more.... Visit our website for special offers and our complete inventory: Leasing through Kleyn Trucks is available in most European countries! Quickly calculate your lease rate and send a request through our website. Ask directly about our European warranty package.

Condition: good (used), mileage: 781,765 km, power: 272 kW (369.82 HP), first registration: 02/2014, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 3,550 mm, fuel: diesel, brakes: retarder, color: green, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 5,830 mm, total width: 2,550 mm, total height: 3,940 mm, Year of construction: 2014, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, parking heater, power mirror, retarder, traction control, = Additional Options and Accessories = - Second diesel tank - Digital tachograph - Tachograph (control unit) - Fixed - Highline - Central lubrication - Auxiliary braking system Kdsdpfx Ahoyaxzfo Neg = Remarks = Number of axles: 2, Configuration: 4x2, Payload: 11,164 kg, Unladen weight: 7,836 kg, Gross weight: 19,000 kg, Total tank capacity: 750 liters, Second diesel tank, Unbraked trailer load: 750 kg, Fifth wheel height: 101 cm, Fifth wheel: Fixed, Number of diff locks: 1, Central lubrication, Suspension type: Air suspension, Cab type: Highline, Cruise control, Tachograph (control unit), Digital tachograph, Air conditioning, Parking heater, Electric windows, Electric mirrors, Color: Green, Heated mirrors, Lighting type: Halogen lamp, Climate control, Seat heating, Engine power: 272 kW (365 Hp), Fuel: Diesel, Euro: 6, Transmission type: Opticruise, Gearbox: Scania, Gears: 12, Auxiliary braking system, Retarder brand: Scania, Power steering, ABS, ASR, Starter battery, Central locking, Seats: 2, Seating configuration: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual = Further Information = Transmission Gearbox: SCA, 12 gears, automatic Axle configuration Tire size: 315/70R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Steered; Tire tread left: 2 mm; Tire tread right: 5 mm Axle 2: Twin tires; Tire tread left inner: 13 mm; Tire tread left outer: 16 mm; Tire tread right inner: 9 mm; Tire tread right outer: 11 mm Weights Unladen weight: 7,836 kg Payload: 11,164 kg Gross vehicle weight: 19,000 kg Interior Number of seats: 2 Maintenance APK (Technical Inspection): valid until 04.2026 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1 Identification Registration: 72-BRL-8 = Company Information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our inventory includes all European makes, years, and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing stock • Recognizable quality • Competitive prices • Reliable business practices • Multilingual staff • Customer-focused service • Import and transport support • (Export) registration quickly arranged • Professional technical services • The security of 'recognized quality' • And much more…. Please visit our website for special offers and our complete stock listing: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send an inquiry via our website. Ask directly for our European warranty package.

Condition: used, Year of construction: 2022, operating hours: 4,157 h, 2022 | Keestrack R5 Impact | Used Crusher | 4157 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 485000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 80 inspection points 79 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good overall condition, electric vibrating feeder, hydraulic pre-scalp, side conveyor for separation and reprocessing. Additional screen on discharge to connect to the electrical outlets of the main generator and centralized lubrication (52FRII 200-0006). 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39421 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? Kjdjyauhbopfx Ah Njdg We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Year of construction: 2015, Specification: X/Y: 110m/min Kdodpfx Ahsyar Rte Njg Z: 20m/min Working Field X: 3250mm Y: 1400mm (Passage 1600mm) Z: 125mm + 100mm for vacuum pods 21 vertical drilling spindles 6 horizontal drills in the X direction 4 horizontal drills in the Y direction Grooving saw swivelling in the X & Y direction 10/12Kw main routing spindle Torque support for carrying aggregates (aggregates can not be swivelled) 8 Position tool changer travelling within the support in X & Y direction (not suitable for aggregates) 2 position linear pick up tool changer suitable for aggregates Optimised processing sequence drilling/routing Laser Pin for Vacuum pod positioning Automatic central lubrication Weeke quality pack Energy saving mode 400V 50hz CE

Condition: excellent (used), Stock number: 7713 Kdjdpfx Aew H Aqxoh Nsg TECHNICAL DATA - Max. working width: 240 mm - Max. working height: 130 mm - 6 spindles: 1) Bottom horizontal 240 mm, 7.5 kW 2) Right vertical 130 mm, 5.5 kW 3) Left vertical 130 mm, 5.5 kW 4) Top horizontal 240 mm, 7.5 kW 5) Top horizontal 240 mm, 5.5 kW (spindles 4 and 5 are electrically adjustable up/down) 6) Bottom horizontal 240 mm, 5.5 kW - All spindles adjustable vertically and horizontally - Spindle diameter: 40 mm Feed system: • From above: - 8 driven, geared steel feed rollers (including 3 double rollers) - 4 driven, smooth rubber outfeed rollers (including 2 double rollers) • From below: - 3 smooth feed rollers - 3 lateral pressure rollers - Infinitely variable feed speed controlled by inverter - Pneumatically pressed rollers - Feed motor: 7.5 kW - Feed via Cardan shaft rollers - Electrically adjustable planing thickness - Body lifting motor: 0.75 kW - Infeed table length: 2,480 mm - Pneumatic opening/closing of safety cabin - Pneumatic blowing of table - Central table lubrication - Extraction connection diameters: 3 x 120 mm, 3 x 150 mm - Dimensions (LxWxH): 5,300 x 1,700 x 1,800 mm - Weight: 5,000 kg ADVANTAGES – Italian manufacturing – 6-head configuration – Suitable for wet and dry timber – Pneumatic cabin opening – Pneumatic table blowing – Spindles 4 and 5 adjustable electrically – Used planer, in very good condition Net price: 136,900 PLN Net price: 32,600 EUR (depending on exchange rate, 4.2 EUR) (Prices may change with currency fluctuations)

Condition: excellent (used), Year of construction: 1993, Catalog number 7706 TECHNICAL DATA - Maximum workpiece width: 220 mm - Maximum workpiece height: 120 mm – 5 spindles: 1) Bottom horizontal: 220 mm, 4 kW 2) Right vertical: 120 mm 3) Left vertical: 120 mm; both 2 and 3 are 7.5 kW 4) Top horizontal: 220 mm, 5.5 kW 5) Bottom horizontal: 220 mm, 4 kW - All spindles adjustable up/down, right/left - Spindle diameter: 40 mm - Pneumatic feed rollers - 4 powered, toothed feed rollers from above including 1 double roller - Top driven outfeed roller, smooth rubber - Bottom driven outfeed roller, rubber Kdjdpfx Ahow Edhie Neg - Feed on drive shafts (Cardan shafts) - Stepless feed speed adjustment: 6–36 m/min - Feed motor: 2.2 kW - Lifting motor: 0.25 kW - With brake - Electric thickness adjustment - Central table lubrication - Infeed table length: 1970 mm - Extraction port diameter: 4x120 mm, 140 mm - Dimensions (L x W x H): 3450 x 1600 x 1450 mm - Weight: 1112 kg Net price: 44,900 PLN Net price: 10,690 EUR (based on the exchange rate of 4.2 EUR) (Prices may vary depending on market fluctuations)

Condition: excellent (used), TECHNICAL DATA - track width 300mm - shaft width 330mm - max saw blade diameter 300mm - blade bore diameter 70mm - max cutting height 90mm - table width with extension 720mm - table length 1800mm * from above: - 2 rows of pawls - smooth metal sliding roller - planing shaft 320mm, 4-knife shaft 7.5kW - head with pneumatic brake - hold-down system - shaft with saw blades - smooth metal sliding roller * from below: - pawls - track - pneumatically adjustable pressure and sliding rollers - central lubrication - feed motor 0.75kW - main motor 30kW - overall dimensions (LxW xH) 1870x1370x1600mm Kdjdpfxeyaq Iws Ah Njg - weight approx. 2500kg ADVANTAGES – planing shaft 320mm with 4-knife head – central track lubrication – solid construction – used multi-blade saw in very good condition Net price: 29,900 PLN Net price: 7,120 EUR depending on exchange rate 4.2 EUR (Prices may change with larger fluctuations)

Condition: excellent (used), CATALOG NUMBER 7651 Technical data: - Track width: 250mm - Shaft width: 250mm - Max saw blade diameter: 400mm - Saw blade bore diameter: 70mm Kdodpsyaq Idefx Ah Nsg - Max cutting height: 120mm - Table width with opening: 810mm - Table length: 1780mm – From above: - Pawls/kickers - Smooth pressure shaft - Pawls - Smooth pressure shaft - Shaft with saw blades - Smooth pressure shafts, 2 pcs – From below: - Guide - Pawls/kickers - Track - Central lubrication - Stepless feed speed adjustment - Feed motor 1.1kW - Main motor 37kW - Manual body lifting - Manual lifting of shaft with saw blades - Chip extraction connection diameter: 200mm - Overall dimensions (L/W/H): 2150x1480x1760mm - Weight: 1735kg ADVANTAGES – German-made – Stepless feed speed adjustment – Multi-blade saw, used, in very good condition Net price: 46,900 PLN Net price: 11,160 EUR (at a rate of 4.25 EUR) (Prices may change depending on exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7652 Technical specifications: - Track width: 350mm - Cutting width: 370mm - Blade diameter: 400 to 450mm - Cutting height for 350/400mm blade: 160mm - Spindle diameter: 70mm - Table dimensions: 1850x800mm - Height from base to table: 750mm Top section: - Pawls/deflectors - 2 smooth, metal sliding shafts - Shaft with saw blades - 3 smooth, metal sliding shafts Bottom section: - Guide bar - Pawls/deflectors - Track - Toothed, extracting drive shaft - Electric body height adjustment - Central lubrication - Stepless speed adjustment via inverter - Feed motor: 2.2kW - Main motor: 55kW - Extraction nozzle diameter: 200mm - Overall dimensions (L/W/H): 2560x1700x1900mm - Weight: 2700kg ADVANTAGES Kodpfxoyaq H Ho Ah Nedg – Made in Germany – Technical documentation (DTR) – Used multi-blade saw – Very good condition Net price: 39,900 PLN Net price: 9,500 EUR depending on an exchange rate of 4.2 EUR (Prices may vary with major currency fluctuations)

Condition: excellent (used), CATALOGUE NUMBER: 7480 Technical data: - Track width: 360mm - Shaft width: 350mm - Max. disc diameter: 350mm - Disc bore diameter: 80mm - Max. cutting height: 120mm - Table size: 2040x1220mm Top section: - Pawls - Driven, toothed shaft - Pawls - Shaft with saw blades - Slip/pressure shaft Bottom section: - Rollers in front of the table, 2 pcs - Guide rail - Pawls - Track - Central track lubrication - Electric lifting of the saw shaft - Electric body lifting - Stepless feed speed control - Extraction port diameter: 140mm, 160mm - Main motor: 30kW - Overall dimensions (L/W/H): 2600x2300x1850mm - Weight approx. 4000kg ADVANTAGES – Czech manufacture – Used multirip saw – Very good condition Net price: 33,900 PLN Kdjdeuzu T Tjpfx Ah Neg Net price: 8,070 EUR (depending on the 4.2 exchange rate) (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number: 7548 TECHNICAL DATA Track width: 250 mm Shaft width: 250 mm Max saw blade diameter: 350 mm Saw blade bore diameter: 80 mm Max cutting height: 120 mm Table width with gap: 700 mm Table length: 1790 mm *From above: Ratcheting pawls Pressure roller, smooth Ratcheting pawls Pressure roller, smooth Shaft with sawblades Smooth pressure rollers: 2 pcs From below: Guide Smooth sliding roller Ratcheting pawls Track Central lubrication Feed motor: 1.1 kW Main motor: 30 kW Electric body lifting Manual saw shaft lifting Extraction nozzle diameter: 160 mm Ksdpoyaq Hgefx Ah Nodg Overall dimensions (L/W/H): 2250x1700x2000 mm Weight approx.: 3000 kg – German-made – Electric lifting of body and saw shaft – Smooth feed speed adjustment – Used multi-blade saw, in very good condition Net price: PLN 68,900 Net price: EUR 16,400 at the rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 600 x 210 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min Kodpfx Aeyangqeh Nedg feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 830 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a training workshop. Equipment: * 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage * Fixed angle table * Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm * Coolant equipment * Central lubrication * Tailstock with counter bearing * Manual

Condition: used, Year of construction: 2015, machine/vehicle number: AH/118733, Busellato JET Optima C21 E CNC Machine Description JET OPTIMA C21 - E X = 3050 mm Y= 1250 mm Z = 130 mm CNC Working centre complete of: · Centralized automatic lubrication · Remote push button panel · Nr. 4 jig locking device connections · Nr. 1 air pressure plug · Nr. 2 working areas (X) · Nr. 6 TL 1250 panel supports · Nr. 12 vacuum cups 140 x 115 H =50 (TL) · Double “0” line (references for 6 panel supports and lateral references) · Panel lifting unit with 4 bars · Cross laser for positioning vacuum cups · 0-360° CNC unit for electro spindle · 1-outlet horizontal router unit 4 kW - ERG32 · Pump 90 m3/h · Boring head TFM 18 with integrated saw unit (12V+4X+2Y) · Electro spindle 11 kW (S6) Kdedpfsxltk Rsx Ah Njg · Tool changer ST10 - HSK F63 · PT1 tool position - HSK F63 · Machine software “Genesis Evolution” · Programming software “Jet Cad” · Tele-service (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2003, pressure 250 t stroke 20 - 190 mm no. of strokes 25 - 140 /min throat 460 mm Kodjvuun Tspfx Ah Nedg passage to the back 590 mm dayligth 690 mm table surface area 1500 x 880 mm hole in the table 950 x 250 mm table height over floor 900 mm ram surface 870 x 725 mm ram adjustment 120 mm power requirement 30,0 kW Weight 32,0 t dimensions of the machine ca. 2,34 x 2,38 x 3,99 m x m x m permitted for manual loading and automatic mode according to the CE-norm with infinitely variable drive, light guard (make Sick), hydraulic clutch/brake combination, hydraulic overload protection in ram, automatic stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, fix table, drawing cushion in table (20 t), motoric centralized lubrication, operator's console with two-hand operation Width between the tie rods in front 940 mm Side passage 900 mm

Condition: used, Year of construction: 2007, pressure 63 t stroke 8 - 120 mm no. of strokes 40 - 120 /min throat 280 mm Ksdpowc U Inefx Ah Njdg passage to the back 325 mm dayligth 440 mm table surface area 820 x 580 mm hole in the table 200 mm table height over floor 830 mm ram surface 470 x 340 mm ram adjustment 100 mm power requirement 4,0 kW Weight 5,2 t dimensions (WxDxH) 1,3 x 1,8 x 2,8 m permitted for manual loading according to the CE-norm with infinitely variable drive, pneumatic clutch/brake combination, light guard (make Sick), hydraulic overload protection in ram, pneumatic counterbalance on ram, manual stroke adjustment, manual ram adjustment, central lubrication, two-hand and foot operation

Condition: used, Year of construction: 1989, pressure 250 t stroke 20 - 190 mm no. of strokes 24 / 48 /min throat 500 mm passage to the back 1000 mm dayligth 615 mm table surface area 1400 x 880 mm hole in the table 450/500 mm table height over floor 800 mm ram surface 1380 x 620 mm ram adjustment 125 mm Kedpfx Ahevut Nce Njdg power requirement 29,0 kW Weight 27,0 t dimensions of the machine ca. 2,0 x 2,6 x 4,1 m x m x m permitted for manual loading according to the German Safety Regulations (UVV) with motor with 2 speeds, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, semi-automatic stroke adjustment, motoric centralized lubrication, two-hand operation can be inspected in running function in our warehouse

Condition: used, Year of construction: 1977, pressure 80 t stroke 8 - 112 mm no. of strokes 65 /min throat 345 mm passage to the back 500 mm dayligth 472 mm table surface area 840 x 610 mm hole in the table 280 / 315 mm table height over floor 800 mm ram surface 650 x 410 mm ram adjustment 71 mm power requirement 13,5 kW Weight 6,10 t dimensions of the machine ca. 1,5 x 1,9 x 3,0 m x m x m Kdodpfx Aovut Npoh Nsg permitted for manual loading according to the German Safety Regulations (UVV) with motor with two speeds, pneumatic clutch/brake combination (Ortlinghaus), mechanical overload protection in ram, manual stroke adjustment, motoric ram adjustment, fix table, motoric centralized lubrication, two-hand operation

Condition: used, Year of construction: 1986, pressure 160 t stroke 20 - 120 mm no. of strokes 20 - 120 /min distance between columns 1300 mm column travel -side 520 mm dayligth 570 mm table surface area 1250 x 900 mm hole in the table 900 x 250 mm table height over floor 1000 mm ram surface 1100 x 700 mm ram adjustment 100 mm material width 20 - 320 mm material thickness 0,3 - 4,0 mm feed length 1,0 - 9999,99 mm power requirement 18,5 kW weight of the machine ca. 25,0 t Kdodpfx Aevut Rtjh Nsg dimensions of the machine ca. 3,0 x 2,3 x 3,7 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination, electro-hydraulic overload protection, automatic stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, motoric centralized circular lubrication electronic roll feed make Kaiser type KWV 320 Z, yom 2000 with hydraulic intermediate lifting of the rolls