Used Central Lubrication for sale (11,371)

Condition: used, machine/vehicle number: FN572336, Year of construction: 2018, operating hours: 10,006 h, load capacity: 1,600 kg, lifting height: 3,700 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,600 kg Lifting height: 3,700 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,200 x 1,100 x 2,360 mm Own weight: 3,300 kg Battery voltage: 48 V Battery capacity: 750 Ah Battery type: 6 PzS Battery voltage in idle state: 51.6 V Service valid until: 09/2027 UVV (accident prevention regulations) valid until: 09/2027 Operating hours: 10,006 h EQUIPMENT Formerly a Jungheinrich full-service machine Gkjdpoz Iwm Sefx Akyoc Clear-view mast without central hydraulic cylinder Load backrest Full cabin with heater and windshield wiper LED work light at the front LED work light at the rear Comfort seat Side shifter All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible for truck heights of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the specified time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 111

Condition: used, machine/vehicle number: FN597668, Year of construction: 2019, operating hours: 6,532 h, load capacity: 3,000 kg, lifting height: 4,000 mm, fork length: 1,200 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 4,000 mm Fork length: 1,200 mm Fork spreader: 550–1,720 mm MACHINE DETAILS Mast: Free-lift mast without a central hydraulic cylinder Machine type: Electric forklift Year of battery manufacture: 2017 Battery voltage: 80 V Battery capacity: 775 Ah Rest voltage: 84.1 V Gsdpez Iwnpofx Akyekc Dimensions & Weight Dimensions: 3,900 × 1,250 × 2,620 mm Own weight: 5,200 kg Service valid until: 07/2027 UVV certification valid until: 07/2027 Operating hours: 6,532 h EQUIPMENT Former Jungheinrich full-service unit 3rd and 4th valve Free-lift mast Fork spreader with side shifter Full cabin Heater Windshield wiper LED work light (front) Comfort seat All dimensions are approximate values. No warranty is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift truck available on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the specified time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 140

Condition: used, functionality: unexamined, This is a used central lubrication unit, model IG 38-3, manufactured by "VOGEL". Gkjdpfoz Riyqox Akyec

Condition: used, machine/vehicle number: FN668522, Year of construction: 2022, operating hours: 2,910 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 3,500 mm Fork length: 2,200 mm Fork positioner range: 550–1,850 mm MACHINE DETAILS Mast type: Free-lift mast without a central hydraulic cylinder Battery year of manufacture: 10/2022 Gkedsz Iwlbspfx Akysc Battery voltage: 80 V Battery capacity: 775 Ah Battery idle voltage: 84.3 V Service valid until: 07/2027 UVV certificate valid until: 07/2027 Dimensions & Weight Dimensions (L x W x H): 4,700 x 1,300 x 2,400 mm Own weight: 5,500 kg Operating hours: 2,910 h EQUIPMENT 3rd + 4th valve Formerly a Jungheinrich full-service unit Fork positioner with side shift Full cab Heater Windshield wiper LED work light, front LED work light, rear Road traffic lighting with turn signals for road approval Orange warning light Comfort seat with lumbar support All dimensions are rounded values. No guarantee is given for typing or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving confirmation of payment by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the specified timeframe, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 97

Condition: good (used), Central lubrication, oil circulation system, inlet pump, central lubrication unit -Manufacturer: Showa, central lubrication unit from Matsuura MC 710V milling machine -Type: YMAS-3 Gkodpsgxqt Uofx Akysc -Container capacity: 2 liters -Dimensions: 110/220/H250 mm -Weight: 4.2 kg

Condition: good (used), Central lubrication, grease circulation system, progressive pump -for: oil -Contents: 2 liters -Voltage: Volts Gkodpecwdmnofx Akyec -Pressure: 4-7 bar Quantity: 1 piece available -Dimensions: 125/150/H295 mm -Weight: 1.7 kg

Condition: used, Central lubrication, oil circulation system, single-line pump, central lubrication unit, grease lubrication pump, piston pump, lubrication pump, progressive pump, central lubrication pump -Handover: in its current condition as inspected -Device condition: not functioning, control board missing -Manufacturer: Lincoln, Quicklub central lubrication pump -Type: 645-41110-1 -Voltage: 100-240 V -Power: 60 watts -P max: 240 bar Gkedpfjhv Ilwox Akyoc -Dimensions: 270/240/H570 mm -Weight: 15.5 kg

Condition: used, Year of construction: 2021, operating hours: 7,593 h, load capacity: 4,500 kg, lifting height: 3,180 mm, mast type: duplex, fork length: 2,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 4,500 kg Lifting height: 3,180 mm Fork length: 2,200 mm MACHINE DETAILS Mast type: Duplex Drive type: Diesel Dimensions & Weight Dimensions (L x W x H): 5,600 x 1,500 x 2,400 mm Dead weight: 6,413 kg UVV valid until: 04/2027 Next service due in: 564 hours Operating hours: 7,593 h EQUIPMENT 3rd + 4th valve Free-lift mast without central hydraulic cylinder Formerly a Still full-service unit Gjdpfx Aez Iwi Tjkyokc Hydraulic fork positioner Side shifter Full cab Heater Windshield wiper White, non-marking tires LED work light (front) LED work light (rear) StVZO lighting with turn signals for road approval Comfort seat with lumbar support Seat heating All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. A storage fee of €20 per machine per day will be charged if the machine is not collected on time. Outstanding storage fees must be paid in full before collection. Lot number: 32

Condition: used, Lubrication pump, oil pump for central lubrication, REICHERT lubrication unit Central lubrication pump, oil pump for central lubrication, hydraulic pump Oil central lubrication pump, hydraulic power unit Year of manufacture: approx. 1990 Operating pressure: 30 bar Flow rate: 2.75 liters/min Gkjdoxrgucepfx Akyjc Motor power: 0.25 kW Tank capacity: 44 liters - 1 piece of hydraulic pump REICHERT, type PA1 / 1.6 U - 1 piece of pressure gauge 40 bar Space required (L x W x H): 660 x 350 x 650 mm Weight: 46 kg Good condition Sold without oil contents

Condition: used, Lubrication pump, oil pump for central lubrication, lubrication unit Central lubrication pump, oil pump for central lubrication, hydraulic pump, oil central lubrication pump Manufacturer: BEKA Schmiertechnik / Baier & Köppel, Pegnitz Type E-812 / ES0.5 Year of manufacture: approx. 1990 Flow rate: 0.4 l/min Operating pressure: 15 bar Tank capacity: approx. 3 liters Motor power: 0.09 kW Motor speed: 2730 rpm Current consumption: 0.4 A Power supply: 400 Volt, 50 Hz Dimensions L x W x H: 280 x 150 x 380 mm Weight: 8.5 kg Gkodpfxozpbq Ho Akyjc Good condition 2 units available Price stated per unit

Condition: good (used), Central lubrication, oil circulation system, single-line pump, central lubrication unit, grease lubrication pump, piston pump, lubrication pump, central oil lubrication pump, oil single-line pump -Manufacturer: Vogel, Oil - Central lubrication pump, oil inlet pump -Type: unfortunately no exact designation -Item No.: 122 Container capacity: 2.7 l -Dimensions: 235/140/H310 mm Gksdpfx Ajztpq Ajkysc -Weight: 5.4 kg

Condition: good (used), Central lubrication, oil circulation system, single-line pump, central lubrication unit, grease lubrication pump, piston pump, lubrication pump, oil central lubrication pump, single-line lubrication Gsdpfoupbciox Akyokc -Manufacturer: BEKA Baier Köppel, OIL central lubrication pump from milling machine Deckel FP4L -Type: EA 6.3. -Engine: ABM 0.18 kW -Dimensions: 280/140/H375mm -Weight: 14.1 kg

Condition: new, SKF MKU2-KW6-22003+428 – central oil lubrication unit Original unit from SKF / SKF Lubrication Systems Germany GmbH, designed for central oil lubrication systems. Unused unit – warehouse stock. It has not been used in an installation. Only minor storage marks are visible on the housing and tank. TECHNICAL DATA: • Manufacturer: SKF Lubrication Systems Germany GmbH • Model: MKU2-KW6-22003+428 • Type: unit / gear pump for central lubrication • Power supply: 230 V AC • Frequency: 50/60 Hz • Output: 0.2 l/min • Tank capacity: 6 liters • Tank: plastic • Medium: oil • Maximum operating pressure: 30 bar • Connection: G 1/4" Gkjdpfx Akez Alyfjyoc • Number of outlets: 2 • Pressure gauge: YES • Pressure switch: YES • Level control: YES • Control: integrated • Protection class: IP54 • Operating temperature: +10 to +40°C • Oil viscosity range: 20–1500 mm²/s • Year of manufacture shown on the nameplate: 35/17 On the nameplate: SKF Lubrication Systems Germany GmbH MKU2-KW6-22003+428 230 V, 50/60 Hz IEC38 Made in Czech Republic The unit is complete, in the condition shown in the pictures. Condition: NEW / UNUSED – WAREHOUSE STOCK. Sold exactly in the condition and configuration shown in the pictures.

Condition: used, Central lubrication, oil circulation system, single-line pump, central lubrication unit Gsdpfx Aoitv A Nekyekc -Handover: in the current condition as seen -Retaining foot: broken, see photo -Manufacturer. Vogele, central lubrication type SP/AE A1/220/380/1 -Block distributor: SPVS 21S1Z 9A -Drive: Haffner 0.25 kW -Individual components: see photos -Dimensions: 300/210/H320 mm -Weight: 19.8 kg

Condition: good (used), Central lubrication, oil circulation system, progressive pump, central lubrication unit, hydraulic unit, central lubrication, lubrication pump -Hydraulic unit: Central lubrication on mobile base frame -Hydraulic unit: AEG 0.25 kW 1430 rpm -Tank: with level indicator -Control: Schleicher -Individual components: see photos Gjdpfxet Hmi No Akyjkc -Number: 3x lubrication unit available -Price per piece -Dimensions: 640/370/H720mm -Weight: 56 kg

Condition: good (used), Central lubrication, oil circulation system, single-line pump, central lubrication unit, grease lubrication pump, piston pump, lubrication pump, oil central lubrication pump, oil single-line pump -Manufacturer: Vogel, OIL central lubrication pump oil inlet pump -Type: MFE 5/BW 7 -Container capacity: 6 l Gksdpfx Akowykh Sjyjc -Flow rate: 0.5 l/min / 20 bar -Dimensions: 360/145/H370 mm -Weight: 9.5 kg

Condition: used, Central lubrication, oil circulation system, single-line pump, central lubrication unit, grease lubrication pump, piston pump, lubrication pump, oil central lubrication pump, oil single-line pump Gjdpfom Rk Tpox Akyjkc -Manufacturer: SKF Vogel, OIL- central lubrication pump from Uldrian TSM 22-8 rotary transfer machine -Type: MKU11-KW2-0005 428 -Content: approx. 1.8 l -Flow rate: 0.1 l/min / 16 bar -Dimensions: 220/130/H230 mm -Weight: 3.6 kg

Condition: used, Central lubrication, oil circulation system, progressive pump -Contents: 7 l Gedpfx Akjc Rx Swjyjkc -Drive: 0.45 kW -Sample container -Number: 1x pumps available -Price: per piece -Dimensions: 500/230/H450 mm -Weight: 19 kg

Condition: used, Central lubrication, oil circulation system, progressive pump Gkjdpfx Akodnuhveyoc -pneumatic central lubrication -Dimensions: 140/200/H370 mm -Weight: 9.6 kg

Condition: used, Central lubrication, oil circulation system, progressive pump -Drive: Dietz type DR 90 8/4n Gkedpfx Aksd Tkgboyjc -Motor: 1.1 kW 1420 rpm -Dimensions: 460/460/H230 mm -Weight: 27 kg

Year of construction: 2010, condition: used, Central lubrication, oil circulation system Gkodpfx Aksfcr Nhjyoc -Drive: pneumatic -Content: 4.0 l -Container material: aluminum -Operating pressure: bar -Dimensions: 515/260/H225 mm -Weight: 5 kg

Condition: used, Central lubrication, oil circulation system, progressive pump, central lubrication unit Godsfbtgvopfx Akyekc -Lube central lubrication unit: MMX-W -Motor: 100 V/0.01 kW -Dimensions: 280/190/H230 mm -Weight: 9.3 kg

Condition: excellent (used), Year of construction: 2018, operating hours: 4,832 h, functionality: fully functional, machine/vehicle number: 2017058, total length: 7,000 mm, total width: 1,800 mm, overall weight: 5,650 kg, Montresor LOLA 10.8 DX edge grinding machine • Belt running direction: RIGHT to LEFT, year of manufacture: 03/2018, #2017058 • In excellent optical and technical condition – only 4,832 operating hours • 8 end-face grinding supports, 130 & 150 mm, with vertical oscillation • 1 lower and 1 upper chamfer milling support • 3 pneumatic lower and 3 upper chamfer supports • Belt infeed: motorized calibrating/profiling support • Belt outfeed: motorized water-jet support • Automatic centralized oil and grease lubrication • Double-row table extension console • Space requirement approx.: 700 x 180 cm, infeed and outfeed path: 200 x 60 cm Optional services available, such as: freight, installation, and training Pricing • EXW from the machine location, plus VAT, subject to prior sale, does not include tools, attachments, and accessories; items shown in the pictures are not included with the machine/scope of delivery. Godpfx Akoz Rk E Uoyokc Payment terms • 50% down payment upon order confirmation, 50% payment upon notification of readiness for shipment Warranty • Machine sold "as is" with exclusion of all warranty claims Inspection possible • at the facility near Rosenheim Availability • after delivery of the new machine, approximately January/February 2027

Condition: used, Central lubrication, oil circulation system, progressive pump, central lubrication unit -Drive motor: Siemens -Pump: 440 V 0.105 kW -Number: 1 x pumps available -Price: per piece Gkjdpfx Ajd S Eqbskyjc -Dimensions: 290/180/H340 mm -Weight: 8.7 kg

Condition: used, Central lubrication, oil circulation system, progressive pump, central lubrication unit, hydraulic unit -Drive motor: VEB type KMER B 63 K 2 -Pump: 0.18 kW 2760 rpm Godpfxefcw Tue Akyjkc -Tank: 300/220/H220 mm -Dimensions: 430/250/H460 mm -Weight: 24 kg