Used Centering Device for sale (22,496)

Condition: new, Year of construction: 2022, axis stroke (X,Y,Z) 6735 x 1930 x 245 mm Number of spindle head vertical 0 St. Number of spindles head horizontal 0 St. Number of tools 39 St. Pedpfx Amjxf Dwzeyjpw Dust suction hood 2x 250 mm Number of milling agregates 2 St. Year 2022 Speed 18.000 / 24.000 U/min. Required air-pressure 7 bar Motor output 16,5 / 19,2 kW Capacity 250 m³/h Control BH660

Condition: used, Tool presetting machine SOMET, type SPS 500 U Podpfjdzqrtjx Amyjpw Machine no. S1, Year of manufacture 1987 Table surface 545 x 1000 mm Travel ranges X = 500 mm, Y = 340 mm Width in the portal 550 mm Height table - lower edge of portal 250 mm - Longitudinal guide on the portal, right and left of the table - Adjustment via very fine lead screws with handwheel - Quick adjustment via electrical release - Projector screen Ø 150 mm with crosshair and coordinates MEOPTA PMP100 - 2 units of clamping devices for tool measurement - mounted on a base with storage compartment and drawer Space required L x W x H: 1100 x 700 x 1650 Weight 560 kg In good condition

Condition: used, Year of construction: 1972, turning diameter over bed:980 mm turning diameter over slide rest:600 mm turning length:2200 mm turning diameter in the pit:1200 mm lenght of the pit:450 mm turning speeds:24 Psdpfx Aecxxqlemyopw speeds:8 - 800 U/min spindle bore:150 mm x-axis:x = 2000, x² = 350 mm y-axis:500 mm thread pitch -number:398 Stück thread pitch:0,5 - 224 mm thread pitch:0,25 - 112 Teil. mod. thread pitch:56 - 1/8 Gang je Zoll thread pitch:112 - 1/4 D.P. feeds::108 feeds - longitudinal:0,032 - 15,2 mm/U feeds - cross:0,016 - 7,6 mm/min quill::MK6 quill stroke:380 mm voltage:380 V frequency:50 Hz total power requirement:25 PS weight of the machine ca.:7,9 t dimensions of the machine ca.:4,4 x 1,8 x 1,7 m

Condition: used, machine/vehicle number: 3045, turning diameter over bed:870 mm turning diameter over slide rest:520 mm turning length:2100 mm turning diameter in the pit:1080 mm lenght of the pit:430 mm turning speeds:24 turning speed range:8 - 1000 U/min spindle bore:103 mm x-axis:x = 1830, x² = 160 mm y-axis:415 mm longitudinal feeds::104 feed::0,1 - 61,6 mm/U feed::0,0038 - 2 19/64 Zoll/U face feeds:104 face slide feeds::0,3 - 18,4 mm/U face feeds:0,0012 - 47/64 Zoll/U Psdpecxxmijfx Amyjpw thread pitch -number:72 Stück thread - mm pitch:0,5 - 240 mm thread - inch:60 - 1/8 inch. thread - module:0,125 - 60 mm face slide travel:450 mm upper slide:160 mm rapid traverse longitudinal:5140 mm/min rapid traverse cross:2570 mm/min tailstock adjustment out of the central pos.:10 mm quill::Morse 6 quill stroke:280 mm frequency:50 Hz voltage:380 V control voltage:220 v rated current:Sicherung: 50 A rated current:30 A total power requirement:13 kW weight of the machine ca.:4,8 t dimensions of the machine ca.:4,1x1,5x1,9 m

Condition: used, Year of construction: 2014, Working dimensions: X = 3425 mm, Y = 1287 mm, Z = 325 mm. Max. workpiece height: 180 mm. Max. clearance under the hood: Y = 1450 mm / Bumper version = 1370 mm. Includes CabinetControl Base, 1 machine license, and 1 office license. Milling head 7830, 1-stage, power 6.5 kW, air-cooled, n(max.) 1000 - 18000 min-1, infinitely adjustable. Max. power at 12000 min-1 to 18000 min-1 with HSK-F 63 tool holder, with collet chuck with HSK shank. Drilling unit 7884, 14 spindles, 10 vertical spindles individually accessible, arranged in an L-shape, 6 in the X direction and 4 in the Y direction. Drive power 3 kW, 32 mm pitch. Sawing unit: Integrated sawing unit for sawing/grooving in the X direction, n(max.) 1000 - 5650 min-1, infinitely adjustable. Tool holder: A = max. DM = 125 mm. Psdpfsy Tpz Rox Amyepw Location: Supplier.

Condition: like new (used), Year of construction: 2015, operating hours: 9,925 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 55 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, table width: 900 mm, table length: 1,150 mm, table load: 2,000 kg, overall weight: 22,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 9,925 h, coolant supply: 80 bar, tool length: 500 mm, tool diameter: 160 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale: Top-maintained 5-axis simultaneous universal machining center Hermle C52U with a new spindle (replaced in 03/2025) and only 400 hours of operation since replacement! Year of manufacture: 2015 Control unit: Heidenhain TNC 640 Travel paths: X: 1000 mm Y: 1100 mm Z: 750 mm A: +100°/-130° C: 360° Table load: 2000 kg Clamping surface: 1150 mm x 900 mm Equipment: - Heidenhain TNC 640 control - AVD active vibration damping - ACC active chatter suppression - AFC adaptive feed control - Heavy-duty machining (HDM) - Spindle speed: 18,000 rpm - Spindle interface: HSK-A63 - 60 tool positions - 9-way rotary union - Scraper belt conveyor - A3 Blum tool breakage/tool measurement - 3D touch probe Heidenhain Ppodpfjygx Hnjx Amyjw - Electronic thermal compensation - ICS 80 bar with paper band filter - External air blast - Internal air blast - Electronic hand wheel - Hardware kinematic option - Manual cabin door - Automatic cabin roof - Chip rinsing gun ...and much more. The machine is available immediately! The machine is in excellent condition with no defects! All services performed by Hermle! Spindle replacement also carried out by Hermle! Invoice and test protocol available!

Condition: good (used), CMZ brand CNC lathe, TX66 Y2 Quattro model, year 2012, with powered tooling on both turrets, Y-axis... Psdpfxjzcu Hie Amyopw

Condition: excellent (used), Year of construction: 2011, feed length X-axis: 813 mm, feed length Y-axis: 508 mm, feed length Z-axis: 711 mm, HAAS EC-500 Horizontal Machining Center Manufacturer: HAAS Automation Model: EC-500 Year of Manufacture: 2011 Control System: HAAS CNC Country of Origin: USA Ppjdpfxoza Ucre Amyjw Machine Description HAAS EC-500 Horizontal Machining Center in very good technical and visual condition. The machine is equipped with a dual pallet changer and a 4th-axis rotary table, enabling efficient multi-sided machining in a single setup. Ideal for precision machining and high-volume production. Technical Specifications * X-axis travel: 813 mm * Y-axis travel: 635 mm * Z-axis travel: 711 mm * Pallet size: 500 x 500 mm * Number of pallets: 2 * Automatic pallet changer * Maximum workpiece diameter: 750 mm * Maximum workpiece height: 927 mm * Maximum pallet load: 400 kg * Spindle speed: 8,100 rpm * Spindle power: 22.4 kW * Spindle taper: BT40 / CT40 * Inline Direct Drive spindle * Tool magazine capacity: 30 tools * Tool-to-tool change time: 2.8 sec * Coolant tank capacity: 360 L * CNC Control: HAAS * Number of axes: 4 Equipment * Dual pallet changer * Rotary 4th axis (B-axis) * Tool holders included * Chip conveyor * Coolant system * HAAS CNC Control Condition The machine is in good working condition and can be inspected under power. Test run available upon request. Included in the Price * Tool holders visible in the photos * Machine loading included in the price

Condition: excellent (used), Year of construction: 2015, Mikron HPM 800U HD 5 axis Vertical Machining Centre, with 7 pallet changer (2015) Traverses XYZ: 800 x 800 x 550mm, 500 x 500mm table, A axis -91 / + 121 degrees, C axis, 360 degrees, Heidenhain TNC530, Spindle Speed 20,000rpm, 36kW Spindle Motor, Pedpfjzm Ticsx Amyopw HSK A63 Spindle Taper, 165 tools, swarf conveyor, through spindle coolant,

Condition: used, Year of construction: 1979, Technical details: turning diameter over bed: 840 mm turning diameter over slide rest: 520 mm turning length: 4000 mm turning dia. in gap: 920 mm length of gap: 500 mm spindle turning speed range: 7,1 - 1400 U/min feed per revolution: 0,032 - 2,24 mm 4-jaw faceplate diameter: 800 mm total power requirement: 22 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 6,5 x 1,5 x 2,0 m with 2-axes digital readout HEIDENHAIN 3 jaw chuck dia. 315 mm MULTIFIX toolholder 2 fixed steadies ( dia. 340 mm, 520 mm ) Pedpfx Amozm S Ahjyopw *

Condition: like new (used), Year of construction: 2022, operating hours: 4,747 h, functionality: fully functional, machine/vehicle number: 329760, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, This machine can still be inspected while powered on at the factory. It has very few operating hours and is in like-new condition. Used CNC vertical machining center, Pjdpfxszpzq Hs Amyspw Manufacturer: MAZAK Model: VCN 530 C SmoothG Machine number: 329760 Operating hours: 4747 The tools, fixtures, and vise are not included in the scope of delivery. You will find the order confirmation and machine specifications in the attachment.

Condition: not inspected (used), Year of construction: 1984, spindle bore: 81 mm, turning length: 2,000 mm, capacity: 2000 x 725 mm diameter on transverse slide: 400 mm spindle bore: 81 mm Ppedpfx Amjzpza Ieyow weight: 3100 kg

Condition: good (used), Year of construction: 2007, functionality: fully functional, turning diameter: 545 mm, spindle speed (max.): 12,000 rpm, travel distance X-axis: 410 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 570 mm, Equipment: chip conveyor, The MAZAK Integrex 100-IV is a compact and highly precise CNC turning and milling center designed for complete machining of complex workpieces in a single setup. Thanks to the combination of turning and milling functions, as well as the integrated B and Y axes, the machine is particularly suitable for demanding precision parts in the medical technology, mechanical engineering, and precision engineering industries. The machine was manufactured in 2007 and is equipped with the powerful MAZATROL Matrix control. This enables both dialog-oriented and ISO programming and offers modern functions for efficient and productive manufacturing. Key technical data: The travels are 410 mm in the X-axis, 140 mm in the Y-axis (±70 mm), and 570 mm in the Z-axis. The B-axis has a swivel range of 225°, enabling complex 5-axis machining. The C-axis of the main spindle operates with a high positioning accuracy of 0.001°. The maximum turning and swing diameter is 545 mm each. The main spindle reaches speeds of up to 6,000 rpm with a power of approximately 11 kW, which enables dynamic and precise turning operations. The integrated milling spindle operates with speeds of up to 12,000 rpm with a power of approximately 5.5 kW and is ideally suited for milling, drilling, and threading operations. The machine features a tool changer (available) with a maximum tool length of 210 mm and a KM tool holder, which ensures high rigidity and fast tool changes. Equipment: The equipment includes: • Chip conveyor • Tool measurement system "Tool Eye" With a machine weight of approximately 5,040 kg, the Integrex 100-IV impresses with its compact design, high precision, and flexibility – ideal for economical complete machining in modern production environments. You are in the best hands with us – professional, reliable, and with a passion for machines! Necoyir I Rs Eanhd Held Psdezpyvhepfx Amyepw PS CNC Service Germany GmbH & Co. KG All information is subject to change without notice.

Condition: excellent (used), Year of construction: 2019, operating hours: 21,500 h, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 340 mm, travel distance Z-axis: 355 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, nominal power (apparent): 22 kVA, controller manufacturer: Heidenhain, controller model: TNC 640, workpiece length (max.): 470 mm, workpiece width (max.): 400 mm, workpiece weight (max.): 500 kg, total height: 2,431 mm, total length: 2,069 mm, total width: 2,328 mm, table load: 500 kg, spindle speed (max.): 42,000 rpm, operating hours of spindle: 9,500 h, distance table to spindle center: 495 mm, spindle motor power: 13,000 W, number of spindles: 1, number of slots in tool magazine: 16, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, Milling spindle HVC140 HSK-E40 - Milling power S1/S6 40%: 10kW/13kW. Ceramic ball bearings with minimum oil air lubrication. Tool Changer 16 positions for HSK40E (tools until diam. 16 mm and maximum length of 75 mm. Tool measurement with Blum laser (annex on the left) with lasersystemm including tool breakage control. For measurment rotating tools of dia. 0,2 mm by dia. 16mm in the machine. Minimum tool length 45 mm. Tool presenting lapse. Preparation for graphite- extraction L-CUT for vacuum extraction system, consisting of enclosure, roof and pipe union. Graphite extration system. Included preparation for graphite extraction. Air throughput rate approx. 1400 m3/h. Motor output 2,2 kW, noise level approx. 73 dB (A). Rest dust content in exhaus air= max. 0,5 mg/m3. Dust contents are 15 times lower than the MAK values. Sound absorber fo L-CUT. Reducing of acoustic pressure level for approx. 9 dB (A) Remote control Heidenhain. Manual control with setup functions, electric hand wheel and enable button. Psdezpybwspfx Amyjpw Cooling system Hydac for spindle. Automatic lubrication system. Additional LED workroom lamp. Oil mist lubrication unit. Language English (system) Infrared probe Renishaw OMP 400 HSK 40 The machine will be disconnected and dismantled on 16 September 2026. Until then, it will remain connected and in active production. In July 2026, the ball screws, including the bearings, were replaced on the X and Y axes. All spindle filters and oil were also replaced. Our company is an authorized Exeron dealer and service partner. Therefore, the machine will be professionally disconnected and prepared for transport. The price also includes professional loading onto the truck and securing the machine on the truck for transport. The machine dimensions do not include the graphite extraction system. The complete layout is provided in the attached document.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, turning length: 1,530 mm, turning diameter over cross slide: 280 mm, turning diameter: 280 mm, spindle speed (max.): 4,000 rpm, spindle bore: 88 mm, travel distance X-axis: 565 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,599 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 16 m/min, spindle nose: 8, spindle diameter: 210 mm, Equipment: documentation/manual, CNC MSG 501 MAPPS II WORKING AREA Swing over bed: mm 910 Swing over cross slide: mm 850 Maximum distance between spindle noses: mm 1.828 Psdpfszpybqsx Amyspw Maximum turning diameter: mm 280 Maximum turning length: mm 1.530 Bar capacity – Main spindle: mm 75 Bar capacity – Sub-spindle: mm 65 AXES TRAVELS Milling head X-axis travel: mm 565 Milling head Y-axis travel: mm ±115 Milling head Z-axis travel: mm 1.599 Turret X-axis travel: mm 155 Turret Z-axis travel: mm 1.479 MAIN SPINDLE Maximum spindle speed: rpm 4.000 Spindle nose: JIS A2-8 Spindle bore: mm 88 Minimum spindle indexing angle: 0.001° Spindle torque (continuous / 30 min): Nm 490 / 583 SUB-SPINDLE Maximum spindle speed: rpm 4.500 Spindle nose: JIS A2-6 Spindle bore: mm 73 Minimum spindle indexing angle: 0.001° Spindle torque (continuous / 30 min): Nm 349 / 368 MILLING HEAD Minimum B-axis indexing angle: 0.001° Maximum spindle speed: rpm 8.000 Spindle taper: Capto C6 Tool magazine capacity: 40 tools Maximum tool diameter (without adjacent tool): mm 90 (125) Maximum tool length: mm 400 Maximum tool weight: kg 8 TOOL TURRET Number of tool stations: 12 tools Tool shank size: mm 25 Maximum boring bar diameter: mm 40 Driven tools speed range: rpm 4,000 FEED RATES Rapid traverse X-axis: mm/min 24,000 Rapid traverse Y-axis: mm/min 16.000 Rapid traverse Z-axis: mm/min 24.000 Rapid traverse B-axis: min⁻¹ 27 Rapid traverse C-axis: min⁻¹ 300 Rapid traverse turret X-axis: mm/min 20.000 Rapid traverse turret Z-axis: mm/min 24.000 MACHINE DIMENSIONS Machine height: mm 2.735 Floor space required: mm 5.130 × 3.194 Machine weight: kg 14.800 Machine equipped with: • Set of static and driven tool holders • Several Capto C6 tool holders • Ø 210 mm manual three-jaw chuck for the main spindle • Ø 210 mm manual three-jaw chuck for the sub-spindle • Instruction manuals and CE Declaration of Conformity

Condition: used, Year of construction: 2006, functionality: fully functional, input current: 55 A, overall weight: 3,100 kg, table length: 4,000 mm, table width: 1,390 mm, air pressure: 7 bar, spindle motor power: 9,000 W, working height: 110 mm, Machine is used. Working properly. Article details Manufacturer MASTERWOOD Model PROJECT 415 L Category CNC machining centre Year of manufacture 2006 Availability short-term Operating status dismantled / stored Technical specifications Working dimension X 4.000 mm Working dimension Y 1.390 mm Working dimension Z 110 mm Number of milling spindles 1 Main motor power 9 kW Rotation speed max 24.000 rpm Tool clamping system HSK-F63 Tool changer positions 10 Vertical drilling spindles 10 Horizontal drilling spindles in X 4 Horizontal drilling spindles in Y 2 Groove saw in X-direction Cantilever machine Machine table Pod and rail table Number of consoles 8 Control MASTERWOOD CN PC Software MASTERWOOD MASTERWORK MW310, MASTERWOOD MASTERWORK Conformity marking CE mark Ppsdpfxjyft A Is Amyow Weight 3.100 kg Price: 9000 Eur +VAT

Condition: used, Year of construction: 2020, functionality: fully functional, For sale: ELUMATEC SBZ 610 cutting center, manufactured in 2020. Ppsdpfx Amezpwzbjysw The machine is in perfect working order and ready for operation.

Condition: like new (used), Year of construction: 2019, operating hours: 77 h, functionality: fully functional, turning length: 540 mm, turning diameter over cross slide: 320 mm, turning diameter: 320 mm, spindle motor power: 16,500 W, spindle speed (max.): 5,000 rpm, spindle bore: 73 mm, travel distance X-axis: 242 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 540 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 22 m/min, spindle nose: 6, CNC Fanuc Swing diameter over bed: mm 580 Swing diameter over slides: mm 320 Max turning diameter: mm 320 X travel: mm 242,5 Y travel: mm ± 40 Z travel: mm 540 Distance between centers: mm 780 Rapid traverse X/Z: m/min 30/36 Rapid traverse Y: m/min 22,5 Spindle speed: rpm 5.000 Spindle nose: A2-6 Spindle bore: mm 73 Bar capacity: mm 65 Spindle drive power (40 % / 100 % ED): kW 16,5 / 11 Number of live tools station: 12 Turret spindle taper: VDI 30 Max speed of live tools: rpm 5.500 Tailstock sleeve: Morse 4 Tailstock travel: mm 550 Podpfx Aezpwx Tsmyepw Machine equipped with: • Nr. 3 axial live tool holders • Nr. 3 radial live tool holders • Set of fixed tools • Collet holder for spindle • Set of collets • Manual self centering chuck Kitagawa diam. mm 160 • Manual self centering chuck Kitagawa diam. mm 125 • Instruction manuals and CE declaration

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 3425C 013, We will provide more detailed information about the equipment during a personal on-site visit, which we recommend. Ppedpfx Aszpwunjmyow

Year of construction: 2009, condition: used, functionality: fully functional, machine/vehicle number: C107230, We are offering a well-maintained Emmegi PHANTOMATIC T3 A CNC machining center, ideal for processing aluminum and light alloy profiles. Pjdpfx Amsy Idm Rsyepw Machine Details: Manufacturer: Emmegi S.p.A. (Italy) Model: PHANTOMATIC T3 A Year: 2009 Serial Number: C107230 Power: 7.5 kW Voltage: 400 V / 3-phase Current: 16 A Frequency: 50 Hz Weight: 1950 kg Description: The PHANTOMATIC T3 A is a versatile CNC machining center designed for milling, drilling, tapping, and cutting operations on aluminum profiles. Known for its reliability and precision, this machine is suitable for window, door, and façade production, as well as general aluminum fabrication.2Emmegi

Condition: used, Year of construction: 1997, functionality: fully functional, ++++ SPECIAL OFFER: €3,500 ++++ Wemas VZ 1000, Year of manufacture: 1997, Control system: Heidenhain TNC 407, Travel range X/Y/Z: 1016/610/660 mm, 4 axes, Tool changer with 20 positions, Tool holder: SK 40, Ppjdpezpwkcofx Amyew Spindle speed up to 6,000 rpm, Table size: 1300 x 600 mm, Cooling system, High-pressure cooling system (IKZ) defective, Operating hours: 43,000

Condition: used, Year of construction: 1999, functionality: fully functional, travel distance X-axis: 508 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, total height: 2,500 mm, total length: 2,200 mm, total width: 2,000 mm, spindle speed (max.): 7,500 rpm, spindle motor power: 11,200 W, spindle nose: SK 40, number of spindles: 1, number of slots in tool magazine: 21, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, For sale is a robust and proven vertical CNC machining center, a Fadal VMC 2016L, equipped with the popular and easy-to-maintain Fadal CNC 88HS control. A real highlight: The machine is equipped with a fully integrated 4th axis (Fadal VH65 rotary table). The machine can be inspected and demonstrated with short notice. The original manuals and complete technical documentation are available. Target group: Sale exclusively to commercial businesses (B2B). Warranty exclusion: The sale is made ex works with complete exclusion of any warranty, guarantee, or liability for defects by the seller. Sold as is, with all faults. The buyer expressly waives any claims for reduction, conversion, or damages. Podpfx Amezpwcrsyopw Handling & Transport: Dismantling, professional transport securing (blocking the axes), disconnecting the utilities (power/pneumatics), loading, and transport are all at the buyer's expense and risk (sale from foundation/location). The description of the machine serves only for general identification and does not constitute a warranty in the legal sense. The information is not claimed to be complete. Subject to changes, errors, and prior sale. All information without warranty.

Condition: excellent (used), Year of construction: 2018, Winmax control system Travel ranges X/Y/Z: 1,067 x 610 x 610 mm Spindle speed: 12,000 rpm Tool magazine for 30 tools, SK 40 Internal coolant system Chip conveyor Detachable handwheel Ppedpfx Aszmy T Ujmyow

Condition: used, Year of construction: 1999, x-travel 1800 mm y-travel 1000 mm z-travel 1200 mm Ppodpfxezmy T Ij Amyow Control Siemens 840 C total power requirement 20 kW

Condition: used, Year of construction: 1998, x-travel 1800 mm y-travel 1600 mm Ppedpfx Amszmy Tzjysw z-travel 1400 mm Control Siemens 840 C