Used Casio Te 2200 for sale (18,182)

Condition: good (used), Year of construction: 2006, machine/vehicle number: 1100-27-06, Offer 26177 Nljdpfxjzi Slno Amyod Technical data: - Max. shrinkage height: 250 mm - Cooling system - Pneumatic connection: 6 bar - Drive: 400 V - Space requirement (approx.): W 500 x D 550 x H 700 mm - Weight (approx.): 70 kg - Space requirement: W 550 x D 750 x H 1350 mm - Weight (approx.): 120 kg

Condition: good (used), Year of construction: 1999, Compressed Air dyer Operating pressure: 13 - 18 bar Flow rate at 7 bar: 12,7 m^3/min Voltage: 400 V Weight: 660 kg Nlsdpfx Ajg Nk Abjmyed Overall dimensions: 1050 x 1550 x 1500 mm

Condition: refurbished (used), Year of construction: 2015, operating hours: 20,640 h, functionality: fully functional, overall weight: 24,500 kg, total width: 2,500 mm, Completely overhauled machine Single-shaft shredder, particularly suitable for secondary shredding and granulation of pre-shredded materials. Application: Commercial waste for thermal or material recycling, e.g., paper, cardboard, plastics and foams, rubber, leather, textiles, floor coverings, etc. Lindner Komet 2200 HP, overhauled in March 2026 Year of manufacture: 2015 Control cabinet with ABB frequency converter, dust-tight with recooler Control panel: complete Drive motors: ABB 2x200 kW Paintwork new / RAL: 5003/7001 Rotor bearings/pull-off sleeve/shaft seals: new Nlodpfx Aoyu Undemyed Hydraulic unit: complete Total weight approx. 24.5 t Dimensions (LxWxH) mm: 5800 x 2500 x 3100 mm Inspection and trial run/test run possible by appointment. Delivery time: immediate

Condition: good (used), Year of construction: 2020, functionality: limited functionality, machine/vehicle number: ADL 2200/6, total height: 2,200 mm, Insulated glass production line and refrigerator with pumps for water purification a) ADL 2200/6 insulated glass production line b) BM7 butilex applicator, 7 kg Nledpfx Ajzgu Rhsmyed c) TMPB 200 two-component extruder d) F-200 refrigerator e) PKM strip cutting machine f) SM 25 strip filling machine g) R.T.M. rotary table h) Water purifier

Year of construction: 2013, condition: used, This listing is for Agilent Technologies 2200 Tapestation The unit is in full working condition and ready for immediate use This automated electrophoresis system provides rapid, scalable analysis of DNA, RNA, and proteins. It accelerates sample quality control workflows using minimal sample volumes Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Njdpfx Amozgfpnsyold Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: ready for operation (used), Year of construction: 2018, stroke length: 250 mm, overall weight: 58,000 kg, Mechanical stamping press manufactured in 2018. This AIDA 315/2MR/LD/TE 3 features a press capacity of 315 tons and a stroke length of 250 mm. It has a maximum die size of 2,250 × 750 mm and can accommodate a maximum die weight of 10,200 kg. If you are looking to get high-quality stamping capabilities, consider the AIDA 315/2MR/LD/TE 3 machine we have for sale. Contact us for further details regarding this machine. • Press capacity: 315 ton • Rated capacity: 3,150 kN • Rated capacity point: 12.7 mm above BDC • Stroke length: 250 mm • Slide adjustment: 160 mm • Shut height: 700 mm • Maximum die size: 2,250 × 750 mm • Maximum die weight: 10,200 kg • Flywheel speed: 628.5 rpm • Operating speed: 15–40 spm • Maximum clutch engagements: 24 per min • Stopping time: 0.386 s • Safety distance: 618 mm • Cushion force: 3,450 daN @ 0.6 MPa • Counterbalance force: 102 kN @ 6 bar • Frame type: Double upright, double-crank • Clutch/brake system: Pneumatic • Lubrication system: Centralized automatic • Slide guiding: Precision guided • Drawing cushion: Integrated • Counterbalance cylinders: Yes • Safety system: Integrated • Operator protection: Yes • Automation ready: Yes • Drawing cushion: Integrated (Included) • Counterbalance cylinders: Yes (Included) • Safety system: Integrated (Included) • Operator protection: Yes (Included) • Automation ready: Yes (Included) • Other optional equipment: Not included Technical Specification Stamping Force 3150 Kn Nedpfx Aezcptwjmyold

Condition: ready for operation (used), Year of construction: 2013, stroke length: 250 mm, overall weight: 58,000 kg, Mechanical stamping press manufactured in 2013. This AIDA 315/2MR/LD/TE 3 features a press capacity of 315 tons and a stroke length of 250 mm. It is designed for high-precision stamping operations with a robust double-upright frame and integrated drawing cushion. If you are looking to get high-quality stamping capabilities, consider the AIDA 315/2MR/LD/TE 3 machine we have for sale. Contact us for further details regarding this machine. • Main technical data: • Press capacity: 315 Ton • Rated press force: 3,150 kN • Rated capacity point: 12.7 mm above Bottom Dead Center (BDC) • Normal crankshaft stop position: Top Dead Center (TDC) • Stroke length: 250 mm Nodpfxszcppxj Amyold • Slide adjustment: 160 mm • Shut height: 700 mm • Slide speed: 15–40 strokes/min • Maximum flywheel speed: 628.5 rpm • Maximum clutch engagements: 24 engagements/min • Stopping time: 0.386 s • Safety distance: 618 mm • Die and working area: • Maximum die size: 2,250 × 750 mm • Maximum die weight on slide: 10,200 kg • Machine structure: • Frame design: Double upright (straight-side) frame • Drive system: Double connecting rod (double pitman) • Slide guidance: Guided slide • Motion type: Mechanical crank press • Slide movement: Vertical reciprocating motion • Main axis movement: Rotary crankshaft drive • Ram adjustment: Motorized slide adjustment • Cushion system: • Type: Integrated drawing cushion • Maximum cushion force: 3,450 daN at 0.6 MPa • Systems and safety: • Counterbalance cylinders: Yes • Counterbalance force: 102 kN at 6 bar • Clutch & brake system: Pneumatic • Lubrication system: Centralized automatic lubrication • Safety system: Integrated • Operator protection: Included • Automation ready: Yes • Performance and safety notes: • High-rigidity double-upright frame construction • Double-pitman drive for improved slide parallelism and load distribution • Pneumatic clutch-brake for reliable operation and fast stopping • Designed for integration with automatic feeding and transfer systems • Auxiliary systems: • Counterbalance cylinders: yes (counterbalance force 102 kN at 6 bar) (Included) • Clutch & brake system: pneumatic (Included) • Lubrication system: centralized automatic lubrication (Included) • Drawing cushion: integrated (Included) • Safety system: integrated (Included) • Operator protection: yes (Included) • Automation ready: yes (Included) • Other optional equipment: Not included Technical Specification Stamping Force 3150 Kn

Condition: good (used), Used radial drill press, SASS Mod. TRM 2200. In excellent condition, fully functional. Includes a chuck. Maximum drilling diameter in solid cast iron: 20-22, 100 mm Maximum drilling diameter in solid steel (R=60): 80 mm Sliding quill spindle diameter: 102 mm Spindle taper: Morse 6 Vertical spindle travel: 500 mm Rotation speeds: 32 Spindle speed values with 50 Hz motor: 18 ÷ 1600 rpm Automatic feeds Njdoikqz Sopfx Amyold Maximum overhang from column centerline to spindle axis: 2230 mm Minimum and maximum drilling radius: 660 ÷ 2505 mm Head travel on the arm: 1845 mm Vertical travel of the arm: 1040 mm Column diameter: 550 mm Column height with motor: 3720 mm Baseplate height: 260 mm Base dimensions: 2490 x 1230 mm Spindle motor: 11 HP Weight: 9000 kg

Condition: new, Heidenhain TE 737D keyboard ID 824 048-01 V7 SN 64005371B, unused, 100% functional, scope of delivery as per photos. Nodox Er S Njpfx Amyeld

Condition: new, Heidenhain TE 737D keyboard ID 824 048-01 V7 SN 64397179B, unused, 100% functional, scope of delivery as shown in photos. Njdpfxjx Er Tgo Amyold

Condition: new, Heidenhain TE 737D keyboard ID 824 048-01 W2 SN 67530800B, unused, 100% functional, delivery as per photos. Nlsdpfx Amox Er Tmjyod

Condition: ready for operation (used), Heidenhain TE 535D control panel/customer-specific keyboard Deckel-Maho stainless steel, 416mm width, mounting via welded studs, Id. 365 351-01 SN:11871112, professionally fully overhauled and tested with 6 months warranty, 100% functional, delivery scope as per photos. Njdpfex Dwx Asx Amyjld

Condition: new, Heidenhain TE 737D keyboard ID 824 048-01 V7 SN 64005375B, unused, 100% functional, delivery as per photos Nljdpfxsx Er Tae Amyod

Condition: ready for operation (used), Heidenhain TE 420 313 038-12 TNC - control panel without rotary switch, used, in good condition, 100% functional, delivery as per photos Nodpfx Amsy Nqt Heyjld

Condition: ready for operation (used), Heidenhain TE 400 control panel ID: 250 517 SN: 4648841, used, in good condition, 100% functional, delivery as shown in the photos. Nlsdoy Nqtyopfx Amysd

Condition: new, Heidenhain TE 737D keyboard, ID 824 048-01 W2, SN 67573918B, unused, 100% functional, scope of delivery as per photos Nodpfxox Er Tts Amyjld

Condition: good (used), Year of construction: 2016, fuel type: electric, NIFTYLIFT Nifty 120 TE Trailer-Mounted Boom Lift / Mobile Elevated Work Platform, 2016, Dutch registration Inspection valid until 8-2026 A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices and in AS-IS condition without any warranties (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call beforehand, as we are not always on site. Van de Wert Trading B.V. Njdpfx Amjzf Hx Uoyeld Bedrijfsstraat 3 5391 LR Nuland

Condition: used, Year of construction: 2006, Working widths 2200 mm Roller width 2400 mm Number of rollers 2 Stück Supporting roller - dia 270 mm Roller covering - soft rubber 75 Grad shore Swimming roll - dia 210 mm Roller covering - soft rubber 75 Grad shore Pressure line 50 N / mm Pressure total 12 to Cloth guiding system 2 Profilbreithalter,1LW Liquor trough with guide roll und Doppelwandheizung Drive side nach Auftrag Nedotv Iamspfx Amysld Operting side nach Auftrag Hydraulic unit for combined pressure aus Edelstahl Liquor trough with displacer +1 Leitwalze Compensator pneum. Entlastung Drive shaft Durchmesser 70 mm • Machine will be completely overhauled before delivery, we supply with warranty, • Cloth guiding for knitted fabrics - 2 driven profile expander, (Photo shows an overhauled machine in delivery-status), • additional new frequency drive for adaptation into a plant is possible,

Year of construction: 1963, condition: used, machine/vehicle number: 18135, Broaching Machine – Horizontal Manufacturer: Forst Typ: RIW 100/2200 Nljdpfx Amsbrcy Njysd Force: 100 Tons Stroke: 2.200 mm It is possible to buy the Crane - see offer no Y941

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Grooving parquet machine ZEFIRO - automatic producing of the grooves on the plywood back side of parquet boards. Useful length 2400 mm. Nedpfsx Rrqvjx Amyeld Entry belt conveyor included.

Condition: good (used), Year of construction: 1989, functionality: fully functional, working width: 500 mm, wire diameter (max.): 4.5 mm, We are offering this used Gensch GSA 2200 wire mesh welding machine, manufactured in 1989, in good condition. The mesh welding machine can process wire thicknesses from 3 to 5 mm. Operating principle: The longitudinal wires, up to 6 pieces, are drawn from coils that unwind from spools into the welding portal. The transverse bars then fall from the magazine into the welding portal; the spacing of the transverse bars can be adjusted freely. The welding presses close, and the longitudinal and transverse wires are welded together. After the welding process, the CNC-controlled carriage advances the mesh mat step by step. At the end, the mat is cut, and any wire overhang is trimmed. Finally, the mat is stacked. The current working width is 50 cm. The length of the mesh can be freely selected from 20 cm to 200 cm. If you have any questions or need more information, please send us a message or call us. Nlodpfx Aozfgqqomysd

Condition: good (used), Year of construction: 2005, functionality: fully functional, LINDNER KOMET 2200 SHREDDER Shredder for Refuse-Derived Fuel (RDF) and plastic Two 132 kW motors Number of blades on the rotor: 60 Blade dimensions: 175 x 57 x 28 mm Number of fixed blades: 12 Nsdpfx Aszd Hqhemysld Screen with a 30 mm hole diameter Production: 7 tons per hour Year: 2005

Condition: good (used), functionality: fully functional, Year of construction: 2015, load capacity: 200 kg, mast type: telescopic, lifting height: 19,800 mm, overall weight: 3,050 kg, transport length: 6,400 mm, transport width: 1,110 mm, transport height: 1,990 mm, fuel type: hybrid, color: light blue, OMME 2200 RBD Telescopic boom lift on crawler track with combined battery/diesel drive Max. working height: 21.80 m Nlsdpfx Ajwyb Enjmyod Max. reach: 12.20 m Max. lifting capacity: 200 kg Climbing ability: 19 degrees Drive: Kubota diesel engine, 18.8 hp, and 24 V / 200 Ah battery, 5-hour runtime Color: light blue Special features: non-marking, light-colored tracks, automatic leveling system, remote control Features: - Removable basket - Rotating basket +/- 41 degrees - Variable outriggers - Basket size: 1.25 x 0.80 m - 230 V connection in the basket Technically overhauled and in as-is condition UVV inspection performed upon delivery (new) Available from Langenhagen warehouse. All information regarding the machine is without guarantee. Typographical errors, errors, and prior sale are reserved. Leasing options available through partner companies.

Year of construction: 2023, condition: good (used), functionality: fully functional, 2023 Model Tekin Machine Brand 2200 Roller-Type Automatic Winding 80x100 ABA Polyethylene Film Machine, Line A and Line B (including all necessary components and accessories). Nljdpfx Amjzdy Slsyjd It is currently installed and can be inspected in Kartal / Istanbul.

Condition: new, Year of construction: 2026, AUTHORIZED DEALER Company PROD-MASZ. BENDING BENCH technology Halver, YOUR competent partner when it comes to BENDING BENCHES Folding bench RED Plus 2200/1,2 from the company Prod - Masz to try on site and to take away. You will receive professional instruction on site. Technical specifications: -Working width 2140mm - Sheet metal thickness up to 1,2mm Nlodezdcmyjpfx Amysd -Non-ferrous metals 30% more sheet thickness -Bending angle up to 165° -Bending beam: 15 mm - Passage: 80 mm -degree scale -Stop for preset bending angles - Shelf for sheet metal -Front depth stop -Weight about 420kg Other dimensions (1000,1440,2140,2640,3140,3640,4140mm) on request Accessories - roller scissors (up to 0.8mm) 350EUR Shipping within Germany 180 EUR All prices are plus 19% VAT. Self pickup Certificate CE Guarantee: 12 months. Self pickup