Used Car Baler for sale (24,310)

Year of construction: 1991, condition: good (used), coil weight: (2 x 15 t) / 1 x 30 t coil width: max. 1.900 mm Iijdpfjbh Dg Sox Afioh coil OD: max. 1.900 mm

Condition: good (used), Year of construction: 2012, operating hours: 12,078 h, functionality: fully functional, pressing force: 88 t, filling opening width: 1,100 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 750 kg, overall weight: 30,000 kg, oil tank capacity: 2,000 l, power: 98 kW (133.24 HP), volume flow: 643 m³/h, Technical data baler: Manufacturer HSM GmbH + Co. KG, Germany Type VK 8818 R-FU Year of construction 2012 Total operating hours: 12,078 hours, as of September 2025 Pump operating hours 6,616 hours (effective pump running time) Number of bales pressed: 65,792 bales, as of September 2025 Main press force 880 kN Iodpfjxcngnox Afisih Specific pressing force 120 N/cm² Pressing force cutting edges free rammer 120 kN Dimensions of feed chute 970 x 1,800 mm Theoretical cycle time in idle mode 8.3 seconds Theoretical throughput capacity 643 m³/hour Bale dimensions 1,100 x 750 mm, the length is variable 600 up to 2000 mm Drive power 2 x 45 kW frequency-controlled Connected load 98 kW Total current consumption 192 A Fuse protection 250 A slow-blow 5-fold horizontal tying, fully automatic Throughput rates with a bulk density of 20 kg/cbm 12.86 t/hour Bulk weight of 50 kg/cbm 32.15 t/hour Bale weights with a bale length of approx. 1.2 m 650 up to 750 kg/bale, depends on materiel Hydraulic oil tank capacity 2000 litres PLC control Siemens S7-300 Siemens TP 700 control panel Press dimensions assembled 18,000 x 4,300 x 3.270 mm (l x w x h) Press dimensions with conveyor system 18,000 x 22,000 x 5,765 mm (l x w x h) Transport weight baler approx 30 t (Main press approx. 20 t, press channel with bale clamp approx. 10 t) Special machine equipment: Access locking by means of key transfer system Electro-hydraulic locking of the press carriage during the tying process so that the press plunger does not change position with highly expansive materials Additional optional equipment ordered: Frequency-controlled main drive, 2 x 45 kW, with up to 40 % energy savings compared to the standard motorisation 2 x 45 kW, with the same power output Manual switch-off or switch-on of the number of strapping wires to save on strapping wire for non-expansive material Cutting-edge frei rammer with 121 kN pressing force Sensory wire monitoring, with press switch-off in the event of wire breakage or wire end Bale chute Visual warning signal, mounted on the control cabinet Condition of the baler: The entire baling system (baler and conveyor belt) is in good, operational condition. Technical data for the chain belt conveyor: Manufacturer Stadler Anlagenbau GmbH Typ chain belt conveyor KF 1800 Year of construction 2012 Drive power 7.5 kW Belt speed 0.05 – 0.4 m/second Length of feeding conveyor 6,000 mm Height of side wall from feeding conveyor 400 mm Length of incline conveyor 9,000 mm Height of side wall from incline conveyor 800 mm Length of gooseneck 1,500 mm Incline 30° Nominal width 1,800 mm Useful width 1,700 mm Belt quality EP-500/4 Steel cleats on the rubber belt 50 x 50 mm Hollow pin chain, pitch 125 mm, rollers 36 mm Height of drive axle above ground 4,284 mm Overall height of conveyor belt 5,765 mm Transport dimensions of feeding conveyor approx. 7,000 x 2,200 x 1,250 mm (l x w x h) Transport dimensions of the incline conveyor 13,000 x 2,500 x 2,900 mm (l x w x h) Pit dimensions for the conveyor belt 14,765 x 3,260 x 1,250 (l x w x h) Scope of delivery: The conveyor belt, baling press with bale chute, and wire drawing stations are available for sale, but without the wire. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2008, operating hours: 23,000 h, machine/vehicle number: 00834, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,315 mm, bale width: 1,100 mm, bale height: 720 mm, warranty duration: 3 months, power: 30 kW (40.79 HP), year of last overhaul: 2025, Equipment: documentation/manual, Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler, hereby offers the following machine(s) A repaired HBC60 (30kw) Repaired – in very good technical condition Year of construction: 2008 Isdpfxoxck U Uj Afieih Volume capacity m3/hr max. 365 334 321 301 Volume weight kg/m3 max. 15 30 50 80 Weight capacity T/hr max. 5.5 10 16 24 Bale weight 400 – 800 kg, depending on S.G. of material and bale length Bale length - adjustable Bale height - 720 mm Bale width - 1100 m Filling opening - 1100 mm x 1320 mm Max. size supply - 1500 mm x 1200 mm Pressure force ram - max 60 tonf. Pressure force pre-press flap - max 25 tonnes Cycle time - 18 seconds Motor - 45 kW Motor Twistomat - 2.2 kW Motor counter pressure pump - 1.1 kW Following repairs have been done in our official Bollegraaf OEM Refurbishment Workshop: * Safety doors needle installation replaced with new * Ram wheels behind replaced with new * Bronze strip above ram replaced with new * Movable beam position switch ram replaced with new * Scraper above ram replaced with new * Sealing pre press cylinders replaced with new * New steel beams channel cylinder * nieuwe buisjes oplassen en wielen gangbaar maken * New pusher cylinder underneath vertical tying unit * Safety hatch behind needle installation replaced with new * Several cables and asi modules replaced with new * New air filter * New oil filters

Condition: used, Year of construction: 2008, power: 4 kW (5.44 HP), The Strautmann PP 1207 Baler Potential recyclable materials: Cardboard, film, PET bottles, foam, cans, electronic scrap Technical specifications: Manufacturer: Strautmann Model: PP 1207 Bale size (L x W x H): 1200 x 700 x 800 mm Bale weight: approx. 400 – 500 kg Isdpfsxftvyox Afisih External dimensions (L x W x H): 1844 x 1067 x 2868 mm Transport height: 1970 mm Feed opening: 1145 x 430 mm Pressing force: 580 kN Throughput rate: 1 – 2 bales per hour Number of strapping channels: 4 Machine weight: 2,200 kg Power supply: 400 V / 50 Hz Power requirement: 4 kW Installation site: indoors / outdoors (covered) Noise level: below 80 dB(A) Year of manufacture: 2004 Baler rental possible (Lithuania, Latvia, Estonia, and Poland) PRICE ON REQUEST!

Condition: used, High-performance baler MACFAB - BEMA type 650A Hydraulic press for packaging waste, recyclable renewable raw materials, secondary raw materials Manufacturer no. MF J0162 Year of manufacture 2021 Pressing force 50 tons. Press plate stroke approx. 1000 mm Cycle time per stroke approx. 40 sec. Pressing chamber floor area 1500 x 1100 mm Pressing chamber height 1650 mm Filling opening 1500 x 870 mm Filling height approx. 1250 mm Bale format 1500 x 1100 mm Bale height max. 1100 mm Hydraulic operating pressure 200 bar Motor power 5.5 kW Mains connection 400 volts, 50 Hz, 12 amps. - with two hydraulic cylinders - Door locking via threaded spindle with handwheel - Pressing operation only with the pressing chamber door closed - 2-hand operation for hydraulic tipping of the finished pressed bale - Free space for manual strapping Iijdpfx Afevq Rtkoieh - Standard industrial bales of 1500 x 1100 x 1100 mm are produced - the highly compressed bale is automatically tipped onto a pallet - only 62 operating hours Space requirement L x W x H 2120 x 1350 x 3220 mm Height for transport with lowered hydraulic cylinders approx. 260 cm Weight 1.8 ton. The machine is in very good condition, as good as new. The press has a new price of EUR 22,200 net at BEMA The BEMA company also buys the packaging waste that you press into bales with this press.

Condition: ready for operation (used), Technical specifications of Dixi 60 AUTOMAT baler Filling opening (W x H): 1550 x 1000 mm Drive power: 31.5 kW Pressing force: 60 t Bale weight (depending on material): 350–600 kg Bale dimensions (W x H x D, adjustable): 1100 x 800 x 300–1600 mm Pressing/cycle time: 13/24 s Iiodpev Amw Nsfx Afieh Machine weight: 7000 kg

Year of construction: 1990, condition: good (used), coil weight: max. 15 t Iodpfxebibu Te Afisih coil OD: max. 1.800 mm

Condition: new, VAS 5908 Vehicle Charging Computer Charging computer for vehicle starter batteries (lead-acid, Ge, AGM, and fleece batteries) Battery charger / external power supply with MPC4 control board and nominal 14VDC charging voltage (suitable for 12VDC vehicle electrical systems/batteries) - 100% vehicle electrical system compatibility, protection of on-board electronics/airbags - Use as a charger, external power supply, and for vehicle supply in buffer mode (support during diagnostics/programming) - Extensive protection and self-protection functions - Short-circuit and reverse polarity protection - Protection function in the event of battery defects - Reliable spark suppression - Convenient menu navigation / configurable charging parameters - Built-in communication interface - Sealed housing, protected from internal contamination Housing version 'B': Advantageous for industrial production lines - Status indication via display and high-power LEDs - Menu navigation: German, English, French, Italian, Spanish - Extensive Accessories include an external operating status indicator (DBL-SIG-LR, remote indicator), power/charging cable, wall mounting bracket, etc. - Option: Custom charging parameters - Option: Low-temperature operation down to -40°C - Option: Battery diagnostic system - Option: Regeneration charging for deeply discharged batteries - Electrical safety - Certifications: EN60335, EN60950, UL60950-1, UL1236, CSA C22.2 No. 60950-1-07 Used by leading automotive manufacturers Input voltage: 100-240VAC wide range (tolerance: 85VAC-265VAC), 45-65Hz 130-350VDC; NOTE: Use special firmware for use in combination with inductive power transfer! Iisdpfxev Hptzj Afijh Inrush current / 30A at 264VAC, temperature independent Circuit breaker: 16A slow-blow (e.g., characteristic B) Full load current / 10A (115V/230V) Power factor / >0.98 No-load power / 10W deactivated at output Input fuse / F1 (2x 7A-8A T)/250V (6.3x32mm) Transient surge protection / Varistor (8kA / 151J) Input connection / IEC/EN 60320, C14 Weight: 8.2 kg Find more items - new and used - in our shop! International shipping costs upon request!

Condition: new, functionality: fully functional, overall weight: 2,600 kg, empty load weight: 410 kg, maximum load weight: 2,190 kg, axle configuration: 2 axles, loading space length: 3,000 mm, loading space width: 1,500 mm, loading space height: 440 mm, Year of construction: 2025, machine/vehicle number: 10200726, Koch trailer 125x250cm, 750kg, "Type U4" with high tarpaulin 150cm Type U4 car trailer with a loading dimension of 125 x 250 x 150cm. Lightweight aluminum trailer with a permissible total weight of 750kg and a payload of 570kg including a 10-year warranty. Koch-Anhängerwerke has been manufacturing quality trailers made in Germany for over 30 years. Iodpfx Aji R Hw Hofioih Special features Double-walled anodized aluminium dropside 30mm (unique) Dropside with load securing system in V2A stainless steel (unique) Very sturdy tailgate locks made of V2A stainless steel (unique) Dropside bolting completely 8 mm V2A stainless steel (unique) Four-sided lashing gallery / railing on lid (unique) 2x M16 threaded anchors / sturdy threaded rods at the rear (unique) Further equipment Easily removable tailgate Floor plate stable screen-printed floor, non-slip birch wood glued waterproof Axle and drawbar completely hot-dip galvanized Manufacturer ALKO Large 185/70 R13 tires, balanced and capable of 100 km/h Sheet steel mudguards bolted with 8 mm stainless steel screws 12 volt electrics, 13-pin plug with reversing light High tarpaulin 150cm in gray Set of hooks mounted, hot-dip galvanized, also for net attachment Frame easily removable Other documents Vehicle registration certificate / registration certificate part 2 Accessories available at extra cost, see below. If you would like to buy this trailer or have further trailer queries, please use our internal box trailer "No. U4-HP150 offer".

Condition: used, Year of construction: 1991, power: 3 kW (4.08 HP), For sale or rent! We are offering an HSM 155VL vertical baler for sale. Manufacturer: HSM Model: 155VL Iijdpfx Afoxftrnoijh Year of manufacture: 1991 Motor power: 3.5 kW

Condition: used, mileage: 259,059 km, power: 235 kW (319.51 HP), first registration: 08/2012, overall weight: 26,000 kg, fuel type: diesel, color: yellow, axle configuration: 6x2, maximum load weight: 13,692 kg, empty load weight: 12,308 kg, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro5, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, compressed air brake, cruise control, differential lock, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, parking heater, parking sensors, power assisted steering, seat heater, soot filter, tail-lift, traction control, Original mileage ONLY 259,059 km. Condition: see photos. Superstructure: Mercedes Actros 6x2 construction and machinery transporter, loading bed length 8,700 mm (6,900 mm + 1,800 mm articulated), loading area: length 8,700 mm x width 2,460 mm. WARRIOR electronic heavy-duty winch (approx. 8,000 kg) with remote control. Hydraulic access ramps, closed and split: 1,600 mm + 1,400 mm. DIN lashing eyes. Rear steering lift axle, air conditioning, auxiliary heater, xenon headlights, reversing camera, hill start assist, sprung cab, ABS + ASR * ESP, CD radio, additional headlights, immobilizer, cruise control, daytime running lights, steel wheels, warning beacons, power steering, keyless central locking, differential lock, particulate filter, PTO, multifunction steering wheel, electric windows, roof hatch, onboard computer, electric exterior mirrors, heated exterior mirrors, storage box, engine brake. Wheelbase: 5,250 mm. Gross vehicle weight: 26,000 kg. Unladen weight: 12,308 kg. Payload: 13,692 kg. If a new TÜV inspection is required, we will gladly provide an offer via our partner workshops. Iodpfx Afsxfh Aueioih Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, without new UVV. You can find more trucks on our website. We speak the following languages: German, English, Polish, Turkish. Note: We offer and strongly recommend viewing and inspecting the goods to prevent any misconceptions regarding their condition and suitability. Viewings and inspections are possible at any time by prior appointment and are expressly encouraged. All information is provided without guarantee. We accept no liability for errors or incorrect details in this offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to change, prior sale, and errors.

Condition: excellent (used), Year of construction: 2006, operating hours: 2,632 h, functionality: fully functional, machine/vehicle number: 29.381, pressing force: 35 t, filling opening width: 620 mm, filling opening length: 1,000 mm, total width: 2,380 mm, total height: 2,500 mm, total length: 6,625 mm, Including feed belt. The machine is immediately ready for operation. Ijdpfx Asvaw T Ajfijih

Condition: new, axle configuration: > 3 axles, loading space length: 8,900 mm, loading space width: 2,540 mm, first registration: 09/2025, suspension: air, tire size: 245/70-R17.5, Year of construction: 2025, = Additional Options and Accessories = - Fork sleeves = Notes = Iiodpfsxfbcbox Afioh NEW and UNUSED MAXTRAILER MAX600-S-4-8.90-U 4-axle trailer with hydraulically operated and sliding ramps, loading platform 890 cm with rear incline, ABS/EBS, TPMS, BPW axles with drum brakes, air suspension with lift and lower valve, axle assembly with drawbar approx. 1,750 mm and 50 mm towing eye, coupling height 830–1,010 mm loaded, wide load signs, beacon, 6 pairs of sockets for stakes (approx. 100 x 50 mm), tyres 245/70-R17.5. = Further Information = Axle configuration Tyre size: 245/70-R17.5 Axle make: BPW DRUM Brakes: drum brakes Suspension: air suspension Front axle 1: twin tyres; Max. axle load: 10,700 kg; steered; Left tyre tread inside: 100%; Left tyre tread outside: 100%; Right tyre tread inside: 100%; Right tyre tread outside: 100% Front axle 2: twin tyres; Max. axle load: 10,700 kg; steered; Left tyre tread inside: 100%; Left tyre tread outside: 100%; Right tyre tread inside: 100%; Right tyre tread outside: 100% Rear axle 1: twin tyres; Max. axle load: 10,700 kg; Left tyre tread inside: 100%; Left tyre tread outside: 100%; Right tyre tread inside: 100%; Right tyre tread outside: 100% Rear axle 2: twin tyres; Max. axle load: 10,700 kg; Left tyre tread inside: 100%; Left tyre tread outside: 100%; Right tyre tread inside: 100%; Right tyre tread outside: 100% Dimensions Dimensions (L x W x H): 1,094 x 254 x 375 cm Weights Unladen weight: 8,464 kg Payload: 34,336 kg Gross vehicle weight: 42,800 kg Functionality Body make: MAXTRAILER MAX600-S-4-8.90-U Deck height: 90 cm Condition Overall condition: very good Technical condition: very good Visual condition: very good

Condition: good (used), mileage: 62,000 km, power: 105 kW (142.76 HP), fuel type: diesel, gearing type: mechanical, wheelbase: 4,330 mm, first registration: 06/2021, fuel tank capacity: 65 l, emission class: euro6, color: white, driver cabin: day cab, Year of construction: 2021, Equipment: ABS, air conditioning, cruise control, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, power assisted steering, = Further options and accessories = - Alarm system - Armrest - Outside mirror with flashing light - Automatically dimmed interior rear view mirror - AUX connection - Outside temperature display - Cup holder - Passenger bench - Bluetooth - Digital radio - Tachometer - Electric windows at the front - Electrically adjustable outside mirrors - Driver's airbag - Driver's seat height adjustment - Remote central locking - Tinted glass - Dealer maintained - Height adjustment of front seats - Folding outside mirrors - Air conditioning - Comfort seats - LED lighting - Alloy wheels - 17 inch alloy wheels - Center armrest - Radio/CD player - Rain sensor - Full service history - Side door - Bumpers in body color = Further information = General information Number of doors: 2 Technical information Number of cylinders: 4 Engine displacement: 2,143 cc AdBlue system: Yes Gearbox: 6 gears, manual Maximum front axle load: 1,650 kg Maximum rear axle load: 2,250 kg Dimensions Dimensions (L x W): 779 x 212 cm Weights Empty weight: 2,584 kg Payload: 916 kg GVW: 3,500 kg Functional Loading area height: 78 cm Maintenance APK (General Technical Inspection): New MOT upon delivery History Booklets: Present (dealer maintenance) Iiodsxfbb Dopfx Afioh Condition Technical condition: good Visual condition: good Damage: none = Company information = Nidro cars Holland is located in the centre of the country and is the right address for the purchase of your car, van or truck. The indicated price is the 'internet take-away price'. For questions or a test drive, please contact us: LOOK FOR OUR ENTIRE STOCK AT All trade is possible with us! (Our advertisements are compiled with great care, but no rights can be derived from the content).

Condition: new, functionality: fully functional, overall weight: 2,700 kg, empty load weight: 580 kg, maximum load weight: 2,120 kg, axle configuration: 2 axles, loading space length: 4,000 mm, loading space width: 2,150 mm, color: black, Year of construction: 2025, machine/vehicle number: 18262080, Load area approx. 2150 mm x 4000 mm External dimensions approx. 2160 mm x 5550 mm Permissible total weight: 2700 kg Isdpfx Afsvr S Edeieih Payload: approx. 2120 kg (payload may vary depending on optional equipment) Manufacturer: Temared Special features - Car transporter trailer "Universal" - Steel frame (bolted) - Ramp compartment under the loading platform - Loading ramps (steel) - Hand winch (manual) - 8 lashing rings in side profiles - 2 lashing rings in the front frame profile - Additional longitudinally mounted lashing rings in the frame profile Further equipment - Floor: wooden panel - Tyres: 195/55R10C - Chocks + bracket Running gear - Rubber torsion axle with independent wheel suspension | V-drawbar with towing hitch | Jockey wheel | Electrics - 12 Volt | 13-pin plug | Side marker lights | Clearance lights If you would like to buy this trailer or have further questions regarding car transporter trailers, please use our internal car transporter trailer reference "No. 18262080".

Condition: used, Year of construction: 2005, power: 7 kW (9.52 HP), FOR SALE / FOR RENT: VERTICAL BALER! (Rental available in Lithuania, Latvia, Estonia, and Poland) Technical Information: Manufacturer: HSM Model: HSM 500 VL Pressing force: 54–540 kN Bale size: 1200 x 800 x 1200 mm Bale weight: approx. 500 kg Max. bale size: approx. 1200 x 800 x 1200 mm (W x D x H) Press chamber dimensions: 1200 x 800 x 1520 mm (W x D x H) Motor: 7.5 kW Year of manufacture: 2005 PRICE UPON REQUEST! Iijdjxftiyjpfx Afish

Condition: used, functionality: fully functional, mileage: 990,000 km, power: 315 kW (428.28 HP), first registration: 09/2017, fuel type: diesel, color: blue, axle configuration: 4x2, fuel: diesel, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: ABS, air conditioning, onboard computer, Mercedes Actros 1843 - 09.2017 Rolfo EGO 4.27 VVF Iodpswd D Nqofx Afieih - 09.2017

Condition: new, functionality: fully functional, overall weight: 2,700 kg, empty load weight: 645 kg, maximum load weight: 2,055 kg, axle configuration: 3 axles, loading space length: 4,620 mm, loading space width: 1,940 mm, loading space height: 40 mm, Year of construction: 2025, machine/vehicle number: 13261488, Product Information: "Vezeko Car Trailer Race Master Alu 194x460 cm 2.7t" Loading dimensions approx. 1940 x 4620 mm Permissible total weight: 2700 kg Payload: approx. 2055 kg (payload may vary depending on additional equipment) Manufacturer: Vezeko Special Features - Loading platform easily tiltable via 2 hydraulic lift cylinders - 900 kg manual winch as accessory - Shock absorbers with Tempo 100 highway approval Additional Equipment - Floor panel: aluminium floor - Multiple lashing points - 1 piece adjustable aluminium wheel chock - Fitted with 195/55R10C tires - Large safety lights Chassis - Rubber suspension axle | V-drawbar with ball coupling | automatic jockey wheel | reverse automatics Ijdpfxsq T R Smj Afisih Electronics - 12 Volt | 13-pin plug | side marker lights | clearance lights If you wish to purchase this trailer or have further questions regarding trailers, please use our internal tilt trailer reference number "No. 13261488".

Condition: used, Year of construction: 2008, power: 3 kW (4.08 HP), The HSM V-Press 610 is a powerful baler designed for medium to large volumes of waste, making it ideal for commercial and industrial environments. This model combines high capacity, efficiency, and reliability, enabling effective compaction of a wide range of waste materials. Pressing force: 120 kN Drive power: 3 kW Filling height: 655 mm Ijdpfx Ajxfthvsfieih Filling opening (W x H): 800 x 495 mm Bale dimensions (L x W x H): 800 x 600 x 600 mm Bale weight: 100 kg Dimensions (W x D x H): 1198 x 823 x 1986 mm Machine weight: 540 kg Model series: V-Press Consumables: Strapping tape Processable materials: Plastic film, mixed paper, cardboard, punching waste PRICE ON REQUEST!

Condition: new, functionality: fully functional, overall weight: 1,300 kg, empty load weight: 375 kg, maximum load weight: 925 kg, axle configuration: 1 axle, loading space length: 2,720 mm, loading space width: 1,620 mm, loading space height: 100 mm, suspension: other, Year of construction: 2025, machine/vehicle number: 13281434, Loading dimensions: approx. 1620 mm x 2720 mm External dimensions: approx. 2300 mm x 4340 mm Gross vehicle weight: 1300 kg Payload: approx. 925 kg (Payload may vary depending on additional equipment) Manufacturer: Vezeko Special features: - Lowerable trailer - 100 mm aluminium side walls (anodized) - Loading platform hydraulically lowerable (manual pump) - Shock absorbers installed, incl. 100 km/h approval - Rear end angled - 4 lashing eyes on outer frame - 8 lashing points in the loading floor - Front storage box, lockable - Vehicle documents included Additional equipment: - Floor plate: wooden floor - Chock + holder Iiodpfxji R Hxgo Afieh Chassis: - Rubber suspension axle | V-drawbar with ball coupling | Jockey wheel Electrics: - 12 Volt | 13-pin plug | Side marker lights | Clearance lights If you would like to buy this trailer or have any further questions about trailers, please use our internal reference for lowerable trailers "No. 13281434".

Condition: used, Year of construction: 2005, power: 7 kW (9.52 HP), SALE OR RENTAL OF VERTICAL BALER! (Rental available in Lithuania, Latvia, Estonia, Poland)! Technical information: Manufacturer: HSM Model: HSM 500 VL Press force: 54–540 kN Bale size: 1200 x 800 x 1200 mm Bale weight: approx. 500 kg Max. bale size: approx. 1200 x 800 x 1200 mm (W x D x H) Press chamber dimensions: 1200 x 800 x 1,520 mm (W x D x H) Motor: 7.5 kW Year of manufacture: 2005 PRICE ON REQUEST! Iisdjxftg Ejpfx Afioh

Condition: new, functionality: fully functional, overall weight: 750 kg, empty load weight: 350 kg, maximum load weight: 400 kg, axle configuration: 1 axle, loading space length: 2,480 mm, loading space width: 1,350 mm, loading space height: 1,500 mm, suspension: other, Year of construction: 2025, machine/vehicle number: 16412326, Product information: "Blyss Box Trailer 750kg Unbraked 135x248cm Height: 150cm" Loading dimensions: approx. 1350 mm x 2480 mm, height 1500 mm External dimensions: approx. 1850 mm x 3685 mm x 2050 mm Permissible total weight: 750 kg Payload: approx. 400 kg (payload varies depending on optional equipment) Manufacturer: Blyss Special features: - Plywood box / plastic-coated wood panels - Lashing rails on both sides - 4 lashing points in the load bed - Rear support legs - Forced ventilation - Vehicle documents included Additional equipment: - Floor plate: wooden floor - Double wing rear door with locking bar / lockable - Wheel chocks + holder Chassis: - Axle and drawbar fully hot-dip galvanized | V-drawbar with coupling hitch | support wheel Electrics: - 12 Volt | 13-pin plug | outline marker lights | rear fog light Iiedpoi R Hw Refx Afioh If you would like to purchase this trailer or have further questions about trailers, please use our internal box trailer reference "No.16412326".

Condition: new, functionality: fully functional, overall weight: 2,700 kg, empty load weight: 534 kg, maximum load weight: 2,166 kg, axle configuration: 2 axles, loading space length: 2,600 mm, loading space width: 1,530 mm, loading space height: 250 mm, suspension: other, Year of construction: 2025, machine/vehicle number: 18202501, Loading dimensions approx. 1530 x 2600 mm External dimensions approx. 2130 x 4600 x 1650 mm Permissible total weight: 2700 kg Payload: approx. 2166 kg (payload varies depending on additional equipment) Manufacturer: Temared Features: - Construction machinery trailer "Builder" - Steel frame (welded) - Steel side walls 250 mm - Walkable side panels - Excavator bucket rest - Loading ramp with support - 6 lashing rings in the loading floor - Vehicle documents included Additional equipment Iisdpfxsi R Hwue Afioh - Floor plate: wooden floor - Chocks + holders Chassis - Rubber suspension axle | V-drawbar with ball hitch | Heavy-duty automatic jockey wheel Electrics - 12 volt | 13-pin plug | Fog lamp | Marker lights If you would like to purchase this trailer or have further inquiries about our trailers, please use our internal construction machinery trailer reference number "Nr.18202501".

Condition: new, functionality: fully functional, overall weight: 2,000 kg, empty load weight: 690 kg, maximum load weight: 1,310 kg, axle configuration: 2 axles, loading space length: 3,050 mm, loading space width: 1,550 mm, loading space height: 300 mm, suspension: other, Year of construction: 2025, machine/vehicle number: 12312572, Loading dimensions approx. 1550 mm x 3050 mm External dimensions approx. 1670 mm x 4410 mm Permissible total weight: 2000 kg Payload: approx. 1340 kg (payload may vary depending on additional equipment) Manufacturer: Debon Features - Rear tipper "PW1.2 LUX" - Electric hydraulic pump (battery powered) - Charging contacts integrated in the frame profile (12V / suitable for chargers) - 6 lashing eyes on the loading floor - H-frame (installed / removable) - 300 mm aluminium side wall extension (foldable / removable) - 300 mm aluminium side walls (foldable / removable) - Vehicle documents included Iedpfx Asi R Hwmjfisih Additional equipment - Base plate: galvanized steel sheet on phenolic plywood - Wheel chocks + holders Chassis - Axle and drawbar completely hot-dip galvanized | Rubber suspension axle | V-drawbar with ball-type coupling | Automatic heavy-duty jockey wheel Electrics - 12 Volt | 13-pin plug | Fog lamp | Clearance lights If you wish to purchase this trailer or have further questions about trailers, please use our internal tipper trailer number "12312572".

Condition: new, functionality: fully functional, overall weight: 750 kg, empty load weight: 210 kg, maximum load weight: 540 kg, axle configuration: 1 axle, loading space length: 2,500 mm, loading space width: 1,500 mm, loading space height: 150 mm, suspension: other, Year of construction: 2025, machine/vehicle number: Typ-U6M_Angebot, Koch Trailer 150x250cm, 750kg, "Type U6M" Our best-selling unbraked Koch trailer Type U6M with a superstructure made entirely from anodized aluminium. Passenger car trailer Type U6M with loading dimensions of 150 x 250 x 25cm. Lightweight aluminium trailer with a permissible total weight of 750kg and a payload of 540kg, including a 10-year warranty. Koch Trailer Works has been manufacturing quality trailers "Made in Germany" for over 30 years. Features - 10-year warranty (unique) - Double-walled anodized aluminium side walls, 30mm (unique) - Side wall with load securing system in V2A stainless steel (unique) - 1 x 22/200 aluminium ramp, mounted laterally - Side wall assembly entirely with 8mm V2A stainless steel bolts (unique) - Jockey wheel included as standard - 2x M16 threaded tension anchors / sturdy threaded rods at the rear (unique) Additional Equipment - 15mm anti-slip, water-resistant birch plywood platform (phenolic resin coated) - Axle and drawbar fully hot-dip galvanized by AL-KO - Large 185/70 R13 balanced tires, rated for up to 100 km/h - Steel mudguards bolted with 8mm stainless steel screws - 12-volt electrical system, 13-pin plug with reversing light - 2 rear supports as shown are available as an accessory for €102.00 Iodpfx Asi R Hxkofioih Other Information - Registration certificate / Vehicle document Part II If you wish to purchase this trailer or have further questions regarding trailers, please use our internal enclosed trailer "Type-U6M_Offer" form.