2 ram baler buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
6
Manufacturer Avermann Typ AVOS 1810S-90/100 Year of construction 2005 Hours of operation 23,072 h Quantity of pressed bales 16,163 piece Press power main press 100 tons Specific press capacity 121,2 N/cm² Feed channel 1,000 x 1,800 mm Capacity per cycle time 1,35 cm³ Theoretic cycle time 12,5 sec. Bale size 1,100 x 750 mm Driving motor 2 x 45 kW Connected load 130 kW Tying system 5 fold vertical, full automatic Throughput rate at a bulk weight of 30 kg/cbm approx. 12,2 tons/h bulk weight of 50 ... more
4
Vertical baler Bramidan X30 for cardboard and PET Used machine, year of production: 2014 Bczc3rfxbf Price: 4900 euro’s (net price) The machine was produced specially for wastes like PET or cardboard. This model in many cases is better than bigger industrial presses with pressure of 50 tons. It has a strong metal construction that provides high capacity and long-lasting working process without any problems. This machine would be perfect for factories and shops with bigger than usual quantitie... more
1
Elect./Voltage: Bbu77m9zta FRIULMAC Quadramat Double End Tenoner -- 2,500 mm (98") Max. x 180 mm (7") min. opening -- Loading space 642 mm (25") -- Thickness 10 - 100 mm (0.4" to 3.9")Equipped With: -- Hogging/ Trim - Hogging/trim - Jump cope - Cope. -- Motorixed opening with LED readout on the control panel, approx. 25" infeed in front of hold downs. -- Variable speed feed 4-30 M/min. (13'-98"/min.), feed motor 4.5 HP -- Feed chain 2-7/8" wide with rubberized pads -- Top pressure wi... more
6
spindle diameter 203,2 mm x-travel 9.000 mm y-travel 4.000 mm Control Sinumerik 840 D grinding spindel dia. 335 mm spindle taper ISO 60 spindle turning speed range 1-350 / 5-1.200 U/min w-axis 800 mm z-axis 1.200 mm rapid traverse X-axis 8.000 m/min rapid travel Y-axis 6.000 m/min RAM dimensions 530 x 600 mm Main drive 75 kW total power requirement 165 kW weight of the machine ca. ca. 130 t dimensions of the machine ca. 16 x 5,5 x 8,1 m With ram and travelling column Ptpjpm Accessories: -... more
5
-----MACHINE AVAILABLE TO END USER CUSTOMER ONLY----- *****ONLY 14,700 HOURS UNIVERSAL STUDER S36 FAVORIT***** 500mm GRINDING WHEEL, 1000mm BETWEEN CENTRES x 175mm CENTRE HEIGHT, MOVABLE TAILSTOCK (not like many that are FIXED restricting machine setups!!!) WITH TAPER FINE ADJUSTMENT, WHEELHEAD ZERO DEGREES +/- 8.5 DEGREES, SENSITRON, LOW WORKING HOURS, IDEAL PRODUCTION GRINDER FOR GRINDING CARBIDE - TOOL STEEL - STAINLESS - HARDENED STEEL ETC....PRICE... more
6
spindle diameter 203,2 mm x-travel 9000 mm y-travel 3500 mm milling spindle diameter 335 mm spindle taper ISO 60 spindle turning speed - stepless 1 - 450 / 5 - 1200 U/min w-axis 800 mm z-axis 1500 mm 2300 mm rapid traverse X-axis 8000 m/min Bbfjyvhfyz rapid motion - y-axis 6000 mm/min Rapid motion z/w 4000 mm/Min. Feed column (X-axis) 1 - 8000 mm/min. Infeed z/w 1 - 4000 mm/Min. Feed head stock (Y-axis) 1 - 6000 mm/min. dimension of the ram 530 x 600 mm engine output 75 kW dimensions 15 x 5,5... more
12

Italian Car Baler Bonfiglioli Ariete

Egyesült KirályságUnited Kingdom
5599 km
ready for operation (used)
This machine is in good working condition. It has a 4.8m long charging box and is complete with operators cabin. Please find pictures attached. Nf9gh more
1
Elect./Voltage: 575 V, 60 Cy, 3 Ph. Hlh2c9qbi FRIULMAT Contouramat Double End Tenoner: -- Automatic hopper feed, wide base tenoner with right side moveable left side [...]: -- 1,000 mm (39") Max. motorized opening with Trim saws and High speed Cope heads; Moveable side traverses with screws,. -- Machine opening programmable control and LED readout at control panel. -- 180 mm (7") Min. opening. -- 8 - 50 mm (0.314"- 2") part thickness with indicator and 30 to 250 mm (1.18" to 9.8") workpi... more


2 ram baler
daily

New machines via email!

Stay updated!
6
Manufacturer Strautmann Typ Bale Tainer Year of construction 2010 Hours of operation 4.100 hours Press power main press 60 tons Feed channel 2,815 x 1,085 mm (l x w) Bale size 1,100 x 1,100 x 700 mm (w x d x h) Driving motor 9,2 kW Connected load 15 kW Tying system 4 fold vertical, fully automated Bale weight up to 400 kg, depends on material SPS controller (manuf., type) Siemens S7 1200 Operating panel (manuf., type) Siemens Simatic Touch Panel Baler dimensions built up with hopper approx. 8,84... more
6
We offer you, an almost unused bending machine from the manufacturer Kramer. Ba0wsvadwv The machine went for a job and was stored since! Machine runs flawlessly. Bending length: 2500 mm Roll diameter 140 mm Material thickness: 2, 5 mm Weight: 2T The machine can be performed live with us in the camp. Our offer is aimed at commercial persons covered in the sense of the Gewerbeordnung GewO according to § 14. The offer is subject to change reserved, sale. Please enter your full cont... more
6
Type of fuel: Electric Height: 130 cm Fork length: 1.150 mm Lift height: 21 cm [...] NEW RVS pallettruck, ONLY 32 kg, easy to lift! Bbqnlzgaz9 Tyres: Vulkollan more
7

Good Car Baler Colmar P5260

Egyesült KirályságUnited Kingdom
5599 km
2002
good (used)
Manufactured in 2002 and in good condition. This machine has 5m long charging box, diesel drive and is complete with a crane, grab, operators cabin and radio control. Bcz3hfd7wf more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bctiodr89r ALLEGHENY COMPLETE SHREDDING SYSTEM -- ALLEGHENY SHREDDER 30-500 -- 75 HP motor -- 30" Wide opening -- 5/8" shred width -- 12" Crusher paddle -- 97 feet per minute input speed -- 15 Feet long output conveyor -- 16,000 working hours -- ALLEGHENY 3430-2572 HORIZONTAL CLOSED DOOR BALER -- 25 HP motor -- 7" Cylinder -- Bale size 72" x 30" x 40" -- Bale weight 1,500 lbs. more
1
x-travel 8.000 mm y-travel 4.500 mm z-travel 950 mm Control Sinumerik 840 C feed speeds x/y/z axis 5.000 mm/min rapid traverse X- and Y-axis 15 m/min spindle turning speed range 10 - 3.200 U/min Bkhuyixx spindle taper ISO 50 Workpiece table measurements (2x) 4.000 x 3.500 m table load capacity max. 5 t/m³ weight of the machine ca. 64 t Accessories - Tool magazine - Automatic tool changer for 60 tools with chain magazine - Tool holder ISO50 - Cooling by the spindle middle 30l/min by 7 bar ... more
6
Manufacturer Strautmann Typ Bale Tainer Year of construction 2011 Hours of operation 3.057 hours Quantity of pressed bales 138 pieces Press power main press 60 tons Feed channel 2,815 x 1,085 mm (l x w) Bale size 1,100 x 800 mm (w x h) length adjustable Driving motor 9,2 kW Connected load 15 kW Bcv7jm0zii Tying system 4 fold vertical, fully automated Bale weight up to 400 kg, depends on material SPS controller (manuf., type) Siemens S7 300 Operating panel (manuf., type) Siemens Simatic Touch Pa... more
11

KRAMATORSK A670

Günzburg, GermanyGermany
6749 km
1969
good (used)
Cdac9lx0 more
3
Indramat CDR A.C. servo used 1.1-100-300-W1-220 controller, serial number according to the photo, properly completely overhauled and tested included with com. photos with 12 months warranty, 100% functional, Bcqgvfjd2o more
2

Special Edition Car baler Lollini A5000 HS

Egyesült KirályságUnited Kingdom
5599 km
2007
good condition (used)
Manufacturer: Lollini Model: AL5000 HS Mobile Year of Manufacture: 2007 Axial Thrust: 160 t (on each of the two opposing cylinders) Minimum Bale Dimensions: 1000 x 600 x 200 mm (7 inch minimum variable) Idle Cycle Time: 55 seconds (50s with automatic cycle) Working Pressure: 220 bar (maximum axial cylinder 260bar) Piston Pumps: 226cc (2off) Diesel Engine: 6-cylinder (200hp) Iveco water cooled with PLC control and electronic check up Opened Charging Box: 5000 x ... more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Wdtyjlg CTD D 45 Double Miter Saw w/RAZORGAGE 10' Programmable StopSpecifications & features: 10" Blade cap., saws fixed at 45° angle (saw heads are adjustable up to 3°), (2) 1.5 HP - 3,450 RPM TEFC 2-belt drive motors, 5/8" arbor; saw actuation by foot pedal valve. -- Equipped with: 2-1/2" Cutting height x 3-1/4" width cap., 35" high cast iron table, 2" dia. air cylinder for vertical blade travel with auto-reverse at bottom of stroke. -- Complete with: ... more
4
sheet width 2000 mm plate thickness 2 mm pre-bending 4 mm roll diameter 80 mm Drive 1,5 kW weight of the machine ca. 670 kg dimensions of the machine ca. 3 x 0,9 x 1,2 m Onttjqh7 Condition: ready for operation Electric 380 Volt Foot switch Asymetric roller arrangement, rear roll adjustment and lower roll adjustment over handwheel, elektr. safety control, upper roller forward swing-out. The sheet thickness refers to a strength of 400 N. Machine dealer with own stock of 2500 m² and cert... more
1
We offer for sale: only uprights Manufacturer: Tegometall / still Construction year: 2014 Scope of delivery: 1 uprights, 2,500 x 1,100 mm Nfbgr Technical details: Shelf depth 1,100 mm Shelf height 2500 mm Field capacity of 4,800 kg Manufacturer TEGOMETALL / STILL color galvanized frame more
5

Gross baler 88 to HSM HSMVK8515

Wiefelstede, GermanyGermany dealership location
6385 km
2001
used
Ddjomkv more
6
Manufacturer ANIS Trend [...] Type ATS110-75D 60 tons Year of construction 2018 Hours of operation 52 hours Press power main press 59 tons Specific press capacity 71 N/cm² Bale density with material cardboard approx.450 kg/m³ Bale density with material PET- and HDPE bottles approx. 280 up to 320 kg/m³ Feed hopper 1,600 x 1,040 mm Capacity per cycle 2,13 m³ Theoretic cycle time 10,7 sec. Bcv7f0mvx3 Cycle time under operating conditions approx. 20 sec. Theoretic throughput rate 441 m³/hour Throu... more
1
Elect./Voltage: 230 or 460 V, 60 Cy, 3 Ph Bbvq9yh2ta WHIRLWIND MODEL 1000L RIGHT HAND UPCUT SAW WITH 2" X 8" CUTTING CAPACITY -- Specifications & Features: -- 2-3/16" x 8-1/4" Cap., 14" blade cap., 3,450 RPM, left-hand unit feeding from right-to-left, 5 HP BALDOR motor. -- This 1000L is complete with: (5 - 90) Cycles/Min; magnetic starter with low voltage controls, air filter, regulator, coalescing filter, and 4" dust chute. -- Foot pedal actuation. -- INCLUDES TIGERSTOP WITH 10' WOR... more
6
-----MACHINE AVAILABLE TO END USER CUSTOMER ONLY----- ***** WE SELL-RENT-BUY-OPERATOR TRAINING-GEOMETRY CHECKS-SERVICE ONLY STUDER MACHINES WITH 40 YEARS STUDER EXPERIENCE***** 500mm GRINDING WHEEL, 1000mm BETWEEN CENTRES x 175mm CENTRE HEIGHT, MOVABLE TAILSTOCK (not like many that are FIXED restricting machine setups!!!) WITH TAPER FINE ADJUSTMENT, WHEELHEAD ZERO DEGREES +/- 8.5 DEGREES, SENSITRON, GRANITAN BASE N38fjg99 LOW WORKING HOURS, IDEAL ... more
5

Anhänger SAMBO FAHRZEUGBAU, Fahrzeugnummer: 7631, mit Auffahrtsrampe

St. Peter in der Au, AustriaAustria dealership location
7051 km
ready for operation (used)
600 €
Offer
Another 8 days
Bcz0n8cfqf more
5
spindle diameter:150 mm x-travel:7000 mm y-travel:3000 mm ram stroke:700 dimension of the ram:300 x 300 mm spindle stroke:600 mm spindle taper ISO:50 spindle turning speed range:2,5 - 1500 U/min feed range:1 - 6000 mm/min rapid motion - x-axis:6000 mm/min rapid motion - y-axis:8000 mm/min table surface area:2000 x 2000 mm table load:25 t Xmiyvgnz b-axis:360 ° rapid power traverse circular:2,4 1/min V-axis:2000 mm spindle motor:46 kW total power requirement:70 kW weight of the machine ca.:70 t... more
5

Gross baler 88 to Welger ZF-3000 SB-3000

Wiefelstede, GermanyGermany dealership location
6385 km
2004
used
Bplrsym7 more
6
Manufacturer Paal Type Konti 275 GS Year of construction 2012 Hours of operation 11,785 h, stand April Press power main press 80 tons Specific press capacity 97 N/m³ Idle volume capacity 590 m³/hour Capacity at 35kg/m³ approx. 360 m³/hour Feed channel 1,750 x 1,020 mm Capacity per cycle time 2 m³ Bale size 750 x 1,100 mm, length variable Driving motor 55 kW Connected load 72 kW Total rated current 130 A Back-up fuse 160 A Tying system 5 fold vertical, fully automatic Bale weight up to 750 kg, de... more
1
Elect./Voltage: 380 V, 50 Cy, 3 Ph. Dal3ynt Electrically controlled Frame Clamp for window assembly with hydraulic pressing force up to approx. 2,000 kG (4,400 Lbs). -- Up/down traveling Horizontal Top & Bottom pressure clamping beams ride on double ball bearings on 2-1/2" wide precision machined steel track verticals; these beams allow for an infinite height (top/bottom opening) adjustment. -- The horizontal (side) pressure assembly also travels (left/right) on ball bearings and can adjus... more
6

Table Type Boring and Milling Machine PAMA SPEEDRAM 3000

Mülheim an der Ruhr, GermanyGermany dealership location
6390 km
2011
used
x-travel 20.000 mm y-travel 5.500 mm z-axis 1.400 mm w-axis 1.200 mm Z- + W- axis 2.600 mm Control Siemens Sinumerik 840D sl boring spindle diameter 200 mm feed range (X, Y, Z, W) 0,5 - 6.000 mm/min rapid traverse (X) 15.000 mm / min rapid traverse (Y) 15.000 mm / min rapid traverse (Z) 15.000 mm / min rapid traverse (W) 15.000 mm / min Supporting sleeve section 460 x 520 mm Yrvdws Machine is in very good condition and can be inspected under power at any time. For further technical detail... more
6
spindle diameter 150 mm x-travel 11.000 mm Gcxa82n y-travel 2.800 mm z-travel 900 mm quill stroke 800 mm max. workpiece weight 15.000 kg/m² tool taper ISO 50 max. torque 2.900 Nm feed - X 20.000 mm/min feed - X 15.000 mm/min feed - Z 15.000 mm/min rapid traverse X-axis 20.000 mm/min rapid traverse Y-/Z-axis 15.000 mm/min spindle turning speed range 3.000 U/min control Sinumerik 840C total power requirement 125 kW weight of the machine ca. 50 t dimensions of the machine ca. 6 x 7,7 x 5,5 m ... more
6

Eccentric C-Frame press WEINGARTEN AR 160

Gammertingen, GermanyGermany dealership location
6689 km
1968
used
Capacity: 160 ton Ram stroke: 20 - 120 mm Ch8k3b8n Ram adjustment: 100 mm Shut height (stroke down, adjustment up): 300 - 450 mm Throat: 500 mm Table surface area : 1.100 x 750 mm Number of strokes: 40 / 60 [...] Weight of machine approx.: 10 ton more
5
Manufacturer MACPRESSE Typ 111/1 Year of construction 2008 Press power main press 170 tons Specific press capacity 14 kg/cm² Feed channel 1,800 x 1,020 mm Filling volume 2,5 cm³ Theoretic throughput rate 750 m³/h Bale size 1,100 x 1,100 mm Driving motor 2 x 75 kW Tying system 5 fold horizontal, full automatic Throughput rate at a approx. 30 up to 35 tons/h, depends on material Volume hydraulic oil tank 3,000 l Baler dimensions built up with hopper 11,460 x 5,945 x 4,055 mm (L x w x h) Machine w... more
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Dv897i SCMI SI 400 E Sliding Table Panel Saw (Programmable) Sliding Table Panel Saw with Motorized Blade adjustments and powered Rip Fence [...]: -- 3,200 mm (126") Stroke length, anodized aluminum 14-1/4" wide sliding table, and 2-position table locks for easy panel loading in any position. -- 45° Tilting, 1" dia. main saw arbor, 400 mm (15.8") blade dia. cap., 130 mm (5") max. cut height 90° - 90 mm (3.1") 45°; 59" rip capacity. -- 9 HP Main saw se... more
15
Serial No. 25651231 Capacity 2500mm x 6.5mm Back gauge Programmable Rapid blade adjustment Yes Bcifs0rga2 Work supports 3 @ 3000mm Squaring arms 1 @ 2775mm Input 400/440/3/50 ac Clamps 12 x Hydraulic Height Length 12'4" / 3.75m x Width 21' / 6.4m Nett weight approx. 8.6 ton / 8740 kgs more
15

Dodge Ram 1500 Crew Cab Sport 5.7L HEMI Short Bed Pickup

Amsterdam, NetherlandsNetherlands dealership location
6218 km
2011
ready for operation (used)
15.000 €
Offer
Another 18 days
Nf8tz more
7
Rexroth Indramat RD500 Refu RD52. 1-8 C-075-W-M1-FW drive, serial number according to the photo, good condition, 100% needed, functional, included with com. photos Hmjgaq7be more
6
Manufacturer Bollegraaf Typ HBC 100 F Year of construction 1993 Hours of operation 50,848 h Press power main press 100 tons Press power of pre-press 50 tons Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 22 sec. Bale size 1,100 x 720 mm Driving motor 75 kW Tying system 5 fold vertical, full automatic Throughput rate at a bulk weight of 30 kg/cbm approx. 12 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h Nfsjd bulk weight of 100 kg/cbm approx. 47 tons/h Ba... more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Ylveb97d WINTERSTEIGER DSG 150 ECO Thin Cutting Frame Saw. To economically saw all kinds of wood types into glueable veneer; a stable, tried and tested basic machine with easily serviceable construction is the reason why this thin cutting Frame Saw is the most successful machine of its kind across the world. -- Side and center guides are fitted as standard on the basic machine to guarantee the broadest possible range of application; patented channel system... more
1
Serial No. 950437 Capacity 2500 mm x 3.5 mm Control Swissax Back gauge Programmable Rapid blade adjustment Yes Work supports 2 @ 960 mm Squaring arms 1 @ 980 mm Input 415/3/50 7.5 kw Mueknk Clamps Full length mechanical Read-out to back gauge metric Actuated via wander type foot switch Fitted with Fingerguard Length 3.1 m Width 1.4 m Height 1.18 m Nett weight actual. 2360 Kgs (2.32 Tons) more
4
Maximum cutting length: 3000 mm Maximum sheet thickness: 6 mm steel M9gej Electrically adjustable back gauge up to 1000 mm with digital display Page fence and table extensions Weight: approx. 6000 kg more
6
Manufacturer Paal Bcv7oo8y3z Type Pacomat 2S Year of construction 2000 Working hours 11,945 h, stand March Press power main press 35 tons Specific press capacity 5 kg/cm² Feed channel 1,000 x 650 mm (l x w) Theoretic throughput rate 85 cbm/h Bale size 700 x 1,000 mm (w x h) length adjustable Driving motor 18,5 kW Tying system 4-fold horizontal, fully automated Volume hydraulic oil tank 200 l SPS Siemens Simatic S5-100U Bale weight approx. 450 kg Transport dimensions 6,500 x 1,600 x 2,900 mm (L... more


2 ram baler
daily

New machines via email!

Stay updated!

to

to

Edit search
2 RAM BALER
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close