Cantilever rack, 2-sided

Bito Höhe 4000 mm

Condition: used, Year of construction: 1999, power: 3 kW (4.08 HP), input voltage: 400 V, cutting height (max.): 200 mm, saw blade diameter: 520 mm, overall weight: 350 kg, cutting length (max.): 420 mm, mount diameter: 50 mm, saw drive: 3,000 W, No. 04511 Crosscut and mitre saw Graule ZS 200 N Used, year of construction 1999 Saw can be swiveled and tilted 3 kW three-phase brake motor 400 V Saw blade diameter 520 mm Saw blade holder 50 mm Hedpfoyh Nfuex Ag Isnl Cutting height 200 mm Saw blade tilted to 45°: Cutting height 140 mm Cutting length 420 mm Table dimensions 900 x 700 mm LW Aluminium fence back With machine stand and hand crank at the rear for tilt adjustment Hydraulic feed brake Pneumatic material clamping on both sides from above Saw blade spray device for coolant or lubricant Carbide circular saw blade for aluminium and plastics, diameter 520 mm Roller conveyor type RLK 4000 mm, with fold-away material fence and scale Roller conveyor 4000 mm long after the saw Roller conveyor width 350 mm Transport dimensions machine approx. 1650 x 1200 x 1850 mm LWH, roller conveyors approx. 4500 x 400 x 1950 mm LWH Weight approx. 350 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: ready for operation (used), Year of construction: 1989, An aluminum die casting system is available. Clamping force: 2200kN, opening force: 71kN, max. opening stroke: 430mm, mold closure: double toggle lever, pressure chamber: cold chamber, position: horizontal. Filling piston diameter min./max.: 40mm/70mm, pressure chamber filling volume min./max.: 293cm³/898cm³, casting pressure: 1990bar, blast area min./max.: 110cm²/338cm², output: 780 cycles/h. Clamping plate dimensions X/Y: 755mm/755mm, column spacing: 500mm/500mm, mold height min./max.: 250mm/600mm, min. mold dimensions X/Y: 296mm/296mm. Including crucible furnace, blow-out device, automatic dosing unit and 4x control cabinets. Documentation available. Hnedpsucfwpsfx Ag Iel

Condition: new, A dedicated machine for producing a straight trench / notch in a variety of timber products used in general joinery, garden furniture, shed, roof truss and timber frame manufacturing. Also can be used for door framing, notching of roof bearers and for log cabin manufacture.As standard the machine is fitted with horizontal pneumatic workpiece clamps and also a hydrocheck damper control to give a smooth stroke action to the cutterhead movement. Precision ball bearing movement on hardened steel runners. Sturdy cast iron construction with steel base stand. 3kw motor. Max tool dia 250mm Bore of tool 40mm. Handwheel rise and fall of cutter motor arm. Max depth of trench / notch 60mm. Width of trench / notch 60mm - in one pass. Max. length of travel of tool 250mm. 2 x horizontal workpiece clamps. Hydrocheck damper to movement of cross cut arm. Hodpfx Asdy Hm Dog Ienl Dust extraction outlet 100mm. Machine stand

Condition: used, Various cantilever racks 4x rack: Dimensions: 6,125 x 2,400 x 3,000 mm Weight approx.: 8,000 kg Hnsdpfx Aoyrq Nlog Iol 2x rack: Dimensions: 5,650 x 2,400 x 3,000 mm Weight approx.: 7,380 kg Structural analysis certificates available !! Photo 1 shows the rack in assembled condition !! ä12526

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf stands, height 4,160 mm with foot section 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 stands in stock) Detailed description: Hnsdpfx Ash Ek Dajg Iel - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilever arms per stand and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels one above the other per side of the stand - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, 04P-023-LF 04P-023-RF 004P014-L-A2 004P014-R-A2 004P023-LF-A2 004P023-RF-A2 04P033-LF-A2 04P033-RF-A2 044P-023-011LF 044P-023-011RF 044P049-021-LF-A2 044P049-021-RF-A2 044P049-033-LF-A2 044P049-033-RF-A2 06P-094-LF-A2 06P-094-RF-A2 064P-079-025-LF 064P-079-025-RF 064P118-017-LF-A2 064P118-017-RF-A2 064P135–049–L-M1268 064P135–049–R-M1268 064P-135-049-LF 064P-135-049-RF 064P-148-034-LF 064P-148-034-RF 066P079-L-A1-M1077 066P079-R-A1-M1077 066P094-L-A1 066P094-R-A1 066P-104-031-LF 066P-104-031-RF 066P-118-035-LF 066P-118-035-RF 066P104-056-LF-A1 066P104-056-RF-A1 066P135-L-A1-M1077 066P135-R-A1-M1077 644P 079-037-014-LF-A2 (M1239) 644P 079-037-014-RF-A2 (M1239) 066P135-063-L-A1, 066P135-063-R-A1 644P-069-026-014-LF-A2-M1239 644P-069-026-014-RF-A2-M1239 664P118-056-017-L-A2- M929 M1256 664P118-056-017-R-A2- M929 M1256 08P-197-LF Hnjdpfx Aef Ddzqjg Iol 08P-197-RF 086P-197-056-LF 086P-197-056-RF 886P-226-226-104-LF 886P-226-226-104-RF and other types, as one package

Condition: new, Year of construction: 2020, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm lock stroke 230 mm ejector stroke 70 mm capacity of ejector 40 kN height of form 120-350 mm Hnodpfxsiu Smbs Ag Iel Column diameter 56 mm casting capacity 54 kN Injection stroke 130 mm injection piston diameter 45, 50, 55 mm Casting volum 109. 150, 194 cm³ volume cast pressure 339. 274, 226 daN/cm² Casting area 176, 218, 264 cm² weight of the machine ca. 3,5 t Equipment of the machine 1.0.1 Cover for drop through area at the subframe 1.0.2 Cover for drop through area at the subframe with scale/chute 1.1.0 Motorized guard in casting direction left 1.4.0 Machine positioning mounting pads 1.5.4 Machine interior illumination 1.11.0 Convenience package energy efficiency 2.0.1 Ejector assistance packages 2.4.2 Securing of ejector platen 2.6.4 Machine assistance system SensiLock 2.8.0 Hydraulic adjustment of locking unit for shot positioning 3.1.1 Nitrogen pressure control for piston accumulator 3.2.4 Multi-Chamber furnace with pump 3.2.5 Isolated Cover for Crucible Multi-chamber-furnace 3.4.4 Prefilling process 3.4.5 Simplified piston removal 3.4.6 Piston stop during return stroke 3.5.2 Electric nozzle and gooseneck heating (extended version) 4.5.0 Shut-off facility for hydraulic locking and injection unit 4.6.1.2 Integrated water circuit 2+4 circuits 5.1.0 Machine control DATADIALOG - Realtime Control (RC) 5.1.2 Convenience Package – Casting – 5.2.1 Ejector Pressure graphics in DATADIALOG control 5.4.1 Data logging Scope 5.4.2 Configurable In- and Outputs 5.6.0 Special cable lengths 6.1.3.1 Digital interface for Non-FRECH extractor (Dispo 10) 6.1.4 Serial interface for 4 heating-cooling circuits ROBAMAT 3.1 6.3.1.1 Hanging operating desk with monitor 6.5.2 Service Package RSD with Switch for each additional machine 7.2.2.2 Spraymotion 611 E with servo drive, 1-circuit 7.2.10 Extended spraying program for spraymotion 7.3.1 Lubricant container TD 20 7.4.0.2 Spray rail CR 245 7.12.3 Low noise chute

Condition: used, Year of construction: 1996, functionality: fully functional, Graule ZS 170 saw, year 1996, Hsdpfx Aewp Stzsg Ijnl 2,000 EUR Graule 6/250 - 160 spindle moulder, year 2008 2,700 EUR Rotary rack for sashes and frames 500 EUR Roller conveyor 7.5 m as buffer for windows before glazing station 600 EUR

Condition: excellent (used), Year of construction: 1988, Krauss Maffei KM 250-900B Closing 250 TO Year 1987 sprayed : 470 g Tie bars wide 63x56 Hnsdpfx Asfp U Hvjg Iel

Condition: good (used), Year of construction: 2020, Foundry machine for aluminum, IDRA 320PRP Refurbished Ontogepszerviz in year 2020 Hodpfxjwpr Ufo Ag Ionl Good working condition AVAILABLE FOR SALE STARTING WITH 1ST OF SEPT 2025 SALE CONDITION IS EXW - DISMATLING AND TRANSPORT NOT INCLUDED IN THE SALE PRICE