Used Cans Seaming Machine for sale (73,925)

Condition: new, plate thickness 2,5 mm roll diameter 98 mm throat 160 mm total power requirement 1,5 kW Dkjdpfx Ajfv H Ehjh Ion weight of the machine ca. 0,35 t dimensions of the machine ca. 550x1400x1500 m Delivered with: • manual version • 4 set of wheels • Foot control • Brake motor • Emergency stop

Condition: new, plate thickness 1,25 mm throat 130 mm total power requirement 0,75 kW weight of the machine ca. 180 kg dimensions of the machine ca. 1,1 x 0,6 x 1,2 m Flanging machine is equipped with: - Emergency switch Dksdpfovn U Dnex Ah Ijn - Footswitch - 8 pcs. Roll sets

Condition: refurbished (used), DALEX roller seam welding machine, cross seam version Projection: 350 mm Nominal power: 160 kVA Sec. short circuit current: 38.5 kA Sec. no-load voltage: 4.8-9.6 V Electrode force: 140-2,040 daN with 2-step switch and auxiliary control with thyristor power stage and Synchronous welding control MPS 100 multi SPECIAL NOTE - PLEASE NOTE The above performance data are taken from the machine's rating plate. When the machine was inspected, it was found that a 200 kVA welding transformer was installed by the previous owner. Dededx Suhspfx Ah Iekn This changes the performance data. .

Condition: new, Year of construction: 2025, Machine to close cans by seaming the lid onto the can - Specifications: max. speed of the machine in neutral: of the machine in neutral: 40 cycles/min; spin speed for sealing: 340 spins/minute; range for can: diameter: 50-160mm, height: 50-200mm; power: 1.1kW; machine dimensions: L2050×W1000×H1800mm; weight: 1100kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Dkjdpfx Ajv Nk Tush Ijn Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, Year of construction: 1971, nominal power at 50% duty cycle: 100 kVA, Manufacturer: Nimak Type: NMP 7/100 Year of manufacture: 1971 Machine No.: 71059 Rated power: 100 kVA at 50% duty cycle Connected load: 175 kVA Primary voltage: 380V Open-circuit voltage: 7.3V Secondary current dd/max.: 8/33 kA Electrode force: 750 kp Frequency: 50 Hz Up to 8.8 V At 6 bar Dkjdpfsw S Exusx Ah Ien Please submit inquiries only by email. All information has been provided to the best of our knowledge. Errors excepted. This offer is exclusively aimed at entrepreneurs as defined in § 14 BGB. Sale is made to the exclusion of all warranties. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of duty by the seller, as well as for injury to life, limb, or health. For further information, please visit the website of Witzenmann GmbH under the keywords "Imprint," "Terms and Conditions," and "Data Protection."

Year of construction: 2025, condition: new, Machine to close cans by seaming the lid onto the can. - Range for can: diameter: 35-130mm, height: 50-200mm; max. speed of the machine in neutral: 30 cycles/min; power: 220/380V, 1.1kW; machine dimensions and weight: L3000×W900×H900mm; wieght: 450kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Dkedpov Nk Tnefx Ah Isn Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: excellent (used), Roller seam welding machine in longitudinal seam design Make DALEX Type PMS 11-4 Nl throat depth: 350 mm Rated power at 50 % duty cycle: 80 kVA Sec. short-circuit current: 23 kA sec. open-circuit voltage: 3.5 - 4.26 V Djdpfstxl Ivox Ah Ijkn with 2-step switch (high/low range) Electrode force: 80-600 daN with add-on switch cabinet according to VDE 0100 Main switch Synchronous welding control unit 8036 Weight: 635 kg Example photo Machine is still being refurbished

Condition: used, Year of construction: 1984, machine/vehicle number: 220-3, Ref. No. 25304 Technical Data: - Machine for producing longitudinal seams on the edges of square or rectangular long ducts - Number of roller shafts with seam rolls: 15 pcs - Material thickness: from 0.5 to 0.63 mm - Duct dimensions: from 80 x 80 mm up to 100 x 100 mm - For duct dimensions from 100 x 100 mm - Material thickness: 0.5 to 1.0 mm - Feed speed: 15 m/min - Pneumatic connection - Drive: 400 V / 3 kW - Includes: - Foot switch Dsdpfx Ahew U Rb Hj Iskn - Duct guide plates - Separate lubrication system - Space requirements: approx. W 5400 x H 1200 x D 800 mm - Weight: approx. 950 kg

Condition: used, functionality: fully functional, The can seamer is the machine used for hermetically sealing the lid to the can body prior to sterilization. Depending on the product, sterilization can also be done before filling. The sealing of the can is achieved by deformation and subsequent overlapping by compression of the metal layers of the can body and the lid. The result is a kind of hook between the two that achieves its hermetic union and, consequently, the tightness of the container. This sealing requires a rubber (sealing gasket) inserted in the rim of the lid to achieve the most effective bonding of the metal layers. * Production may vary depending on the format and product to be closed. * Incorporates steam injection. Features FMC 652 Seamer: -Almospheric/Steam injection. -Geared rotary can seamer. -Integrated head. -Normal lid / Easy open lid. -Can feeding by straight infeed. -Cans diameter min/max: 52.4 - 108 mm. -Cans height min/max: 28-190 mm. Djdpfx Ahjwn Dmds Iekn

Condition: good (used), functionality: fully functional, Lubeca LW792 filler and LW303 seamer Diameter range: 50 - 160 mm Height range: 65 - 300 mm Production capacity: up to 70 c.p.m. Tooling for approx.: 160 x 90 mm Dkjdpfstqmwgox Ah Ijn Lubeca LW792 can filler Lubeca LW303 can seamer

Year of construction: 2005, condition: used, Sewing machine Meccanotecnica Aster 220 SAO Year: 2005 Description: - Colour monitor with touch screen - Pre-loader - Feeder - Optical sheet control Dodpfx Ahjzbqv De Iokn - 4 + 4 opening possibilities - Book block separator - Book stacker: Plus stacker - Excluding pump Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 2005, Sewing machine Meccanotecnica Aster 220 SAO Year: 2005 Dedszbbm Topfx Ah Ijkn Description: - Colour monitor with touch screen - Pre-loader - Feeder - Optical sheet control - 4 + 4 opening possibilities - Book block separator - Book stacker: Plus stacker - Excluding pump Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: like new (used), The can seamer is the machine used to hermetically seal the lid to the can body before sterilization. Depending on the product, sterilization can also be performed before filling. The can is sealed by deforming and subsequently overlapping the metal layers of the can body and the lid through compression. The result is a type of hook between the two, which achieves a hermetic seal and, consequently, the airtightness of the container. This sealing requires a rubber gasket (sealing gasket) inserted into the rim of the lid to achieve the most effective bonding of the metal layers. Production will depend on the format and the product to be sealed. Djdpfx Ahszbi Nie Iekn

Year of construction: 2004, condition: used, Technical details: candle diameter: 21 mm candle length: 300 mm capacity: 1872 Stück/h heating-up temprerature: 70-120 °C Djdpfx Ahsu Nw S Is Iokn cycle time: 13 sec candle material: Paraffin/Stearin control: Siemens S 5 space requirement of the machine approx.: ca.L:24 xB: 2 xH: 5,2 m Candle Production Plant / Candle Molding Machine - This plant is applied for the production of parafin/stearin candles according to the casting process with a high degree of automation. - Multicoloured candles can be produced and equipped with various mould boxes (e.g. cylindrical board candles or pointed candles). - production capacity: for max. theoretical maximum performance of 1872 pieces / h with a minimum cycle time of 23 seconds per mould box with 12 candles with 300 mm pointed candles and board candles with diameter of 21 mm, continuous operation approx. 1200 pieces / h Documentation available Price on a negotiable basis! *

Condition: like new (used), Make: IMC Type: 1 head automatic Dedpfx Ajh I Nr Roh Iekn Model: 478 Capacity: Up to 3,600cph Direction: Left right Frame: Mild steel, paint-coated Dimensions: L x H x W = 1200 x 1300 x 2100mm Weight: 1000Kg Power-supply: 380V+N+E, 2Kw Tooling: 1 set for 153mm tin-can, Features: With Stainless steel infeed conveyor / infeed screw on Stainless steel support Make: Ocim Type: semiautomatic table model ROPP closing machine Model: Super Ermetica Capacity: up to 600 per hour depending on operator Frame: steel painted Dimensions: L x B x H = 1.000 x 700 x 1.700 mm Weight: 150 kg Power-supply: 380 Volt – 50 Hz – 0,37 KW Tooling: 28,5 mm as-is or adjusted to customer needs

Condition: good (used), Semi-automatic can seamer for rectangular cans, in good condition. Djdpfxoxupygj Ah Iskn

Condition: excellent (used), Make: Lanico Type: semi-automatic can seaming machine Model: VA10 Capacity: up to 600 cans / hour Frame: steel, painted Range: can-diameter Ø 53 – 99 mm can-height H = 25 - 300 mm Dimensions: L x W x H = 500 x 600 x 1.900 mm Weight: 200 Kg Power-supply: 380 Volt – 50Hz – 0,75KW Pneumatic: > 6 bar Features: on- off switch with thermal motor protection Dkodpfx Aeg D E T Uoh Ien pneumatic two-hand operation

Condition: excellent (used), Make: Lubeca Type: semi-automatic 1 head can-seaming machine Model: LW210 Range: diameter 99 – 235 mm Dedpfxsibc Eae Ah Iekn height 15 – 320 mm Speed: up to 300 cph Frame: mild steel, paint-coated Dimensions: L x W x H = 700 x 800 x 2.000 mm Power-supply: 380 Volt – 50 Hz – 1,1 kW Control: on-off switch with overload-protection security pneumatic double-hand operation Tooling: 1 set tooling round can, customer choice

Condition: used, functionality: fully functional, Lanico DT 265 Automatic can seamer Dedpfoxupn Rex Ah Ijkn 153 mm complete

Condition: excellent (used), ITALMECCANICA PROFILWOOD MAK6B Automatic Grinder / Sanding machine 6 sanding units, each 1.5 kW, max. working width 250 mm, Depth 0-250 mm, min. Dimensions in mm: approx. 4700 x 2000 x 2300, Weight in kg: approx. 3000, (Makor, Delle Vedove, Venjakob, Flader) Djdpfx Ajdykwleh Iokn

Year of construction: 2005, condition: ready for operation (used), A Makat depositing and cooling line for hard candies is available. Working width: 530mm, mold cavity arrangement: 2 rows, cavities per row: 19, total cavities per mold: 38, max. stroke rate: 25/min, production capacity 4.5g: approx. 400kg/h, product weight: 2.5g/4.5g, total line dimensions X/Y/Z: approx. 10500mm/1500mm/2300mm. Documentation available. An on-site inspection is possible. Djdpfxoy Equms Ah Iokn

Condition: used, Year of construction: 2011, Sewing machine with inline end sheet tipper Meccanotecnica Universe Year: 2011 For high quality digital print finishing. The UNIVERSE SEWING performs 3 operations in standard mode: Sheet feeding, creasing, folding and collating and stitching. The UNIVERSE performs 2 operations: Nipping and end sheet gluing. Configuration: • flat sheet feeder • pc Siemens with touchscreen • GigaLynx sheet control • folding and collating station • thread sewing machine • belt delivery • transfer to the end sheet feeder • nipping press • end sheet feeder with Hotmelt nozzle gluing and ROBATECH premelter Dksdpfx Aou Utzyjh Ion • belt delivery (counter approx. 9.700.000 mio. stitches) Technical specifications: speed plano sheet feeder: up to 300 plano sheet(A4)/min mechanical stitching speed: up to 50 folded sheets/min size range plano sheet max.: 420 x 640 mm size range plano sheet min.: 150 x 200 mm size range folded sheet max.: 420 x 320 mm size range folded sheet min.: 150 x 100 mm number of stitches max.: 10

Condition: like new (used), functionality: fully functional, Features: - Automatic can feeding with synchronised auger. - Lid feeding from both sides (right and left). - Rotary clinching system using guides and inverted ramp with smooth approach, allowing for 10-20 mm overfills. - Upper transmission unit in oil bath supported by production and consistency in closure quality. - Closure technology with progressive closure system and stainless steel head. - Stainless steel protection and safety guards. - Maximum production: 100 cans/min. Dsdpeyrfbvofx Ah Iokn - Production with the current format (127 mm) carried by the machine is approximately 80 cans/minute. Technical data: Max. diameter 160 mm Min-max height 20-175 mm Rotary clincher with guides * Production may vary depending on the format and product to be sealed.

Condition: used, functionality: fully functional, The SOMME 444 Milenium is a high speed automatic rotary seamer, designed for the hermetic seaming of cylindrical metal containers (cans) in continuous production lines. This model is specially conceived for the food industry, offering precision, robustness and reliability in can seaming, complying with international food safety and productivity standards. CAN DIMENSIONS: MINIMUM WIDTH: 45mm MAXIMUM WIDTH: 90mm MINIMUM HEIGHT: 20mm MAXIMUM HEIGHT: 75mm Dodpfx Ajwn Dkcsh Ijkn

Condition: excellent (used), Year of construction: 2008, Top finish brushing machine Italmeccanica TOP FINISH Dkedpfx Ahek Iu Hvo Isn 6T -2M brushing machine one horizontal shaft two edge pin two rotary