Used Can Press for sale (27,884)

Condition: ready for operation (used), Year of construction: 1991, operating hours: 20,242 h, functionality: fully functional, machine/vehicle number: 6538, pressing force: 163 t, overall weight: 25,000 kg, retraction force: 22 t, stroke length: 500 mm, actuation type: hydraulic, TECHNICAL DETAILS Ram Pressing force: 1,600 kN Return force: 220 kN Stroke: 500 mm Drive power: 37 kW Drawing Device Drawing force: 400 kN Stroke: 100 mm Ejector in Ram Ejector force: 50 kN Stroke: 50 mm MACHINE DETAILS Weight: 25,000 kg Electrical Data Gkedpjxgt Tzofx Afioc Pump Unit Ram + Drawing Cushion Rated power: 37 kW Rated current: 72/66 A Voltage: 660/380 V Frequency: 50 Hz Protection class: IP 54 Pump Unit Control Circuit + Ejector Rated power: 7.5/15.5 kW Rated current: 15.5/26.5 A Voltage: 660/380 V Frequency: 50 Hz Protection class: IP 54 Cooling-Filter Circuit Rated power: 2.2 kW Rated current: 5 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Oil Cooler Rated power: 0.37 kW Rated current: 1.2 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Tool Clamping Rated power: 0.55 kW Rated current: 2.6 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Stop Spindle Rated power: 0.75 kW Rated current: 2.3 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Oil Circulation Lubrication Rated power: 0.3 kW Rated current: 1.3 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Operating hours: 20,242 h EQUIPMENT Decoiler (Year: 1999) Straightening machine (Year: 1999) Feed unit (Year: 2004) Tool breakage monitoring system Note: The seller strongly recommends a prior inspection of the machine, as the press cannot be removed from the hall in its assembled condition. If required, the seller can possibly arrange a specialized company for relocating the machine.

Condition: used, functionality: fully functional, operating hours: 15,000 h, machine/vehicle number: Model 0408, pressing force: 150 t, this is a mould clamp for Polyurethane RRIM moulding, Gedpfx Afewgkr Djiskc top and bottomPlatens tilt 35 degrees each, Platens open gap for mould is 2040mm, Platens closed gap is 650mm Platen size is

Condition: like new (used), functionality: fully functional, Year of construction: 2017, machine/vehicle number: Geo Knight Maxi - Press, Please see PDF for detailed secifications: Gkodpfev Dm Udsx Afisc The Maxi Press AIR is an Automatic large format heat transfer press intended for more automated and higher pressure needs than the Manual version. The Maxi- AIR provides an oversized platen & a better production-oriented press with a single front loading table and high pressure pneumatic lifting system. This pressure system is powered by a dual air-bag, 10-ton, 20,000 lbs max force self leveling mechanism. The press is activated with a push of a button, and automatically releases at the end of the timing cycle. The front console features the Digital Knight control, regulating digital temperature and digital automatic timing control, as well as full air pressure regulation. Ideal applications that the Maxi- AIR has performed flawlessly include: large fabrics & piece goods, full-bleed printed sportswear, banners, fl oor mats, carpets, mouse pads, plastics, sheet metal and much more. Most importantly, the 20,000 lbs of regulated applied force allow for deep embedding of materials such as TILES into nomex padding for full bleed wrap-around printing, as well as larger embossing applications. The Maxi- AIR strongly supports the sublimation transfer process, as well as digitally produced transfers, hot and cold peel plastisol transfers and large format laminating processes.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, KOMATSU TRANSFER PRESSES 2300 ton (1500 + 800 Ton) Gjdpoxmrzqofx Afiekc Year 2002 *E4T are the standard Komatsu transfer press machines loaded with the high speed servo feeder on the compact frame. *Large Transfer Presses E4T -Eco-friendly press machines -The high speed press machine pursuing high productivity Immediate Delivery

Condition: excellent (used), Year of construction: 2023, operating hours: 1,200 h, functionality: fully functional, machine/vehicle number: L36/150, product height (max.): 25,000 mm, input voltage: 380 V, L36/150/TC/CE Years: 2023 Flexografic Printing Press 3 colours - 150 mm. width -Automatic twin turret re-winders rotating at the pre-selected tape roll length. - The operator will cut the tape, discharge the printed rolls and load the empty -380V. 50Hz 3phase Cast Iron Support Frame MACHINE DESCRIPTION 3" i.d. frictioned un-winder for tape Noise reducer & Low Tape alarm pressure roller Corona Treatment unit - Corona Treatment proportionally adjusted on the tape speed - Ventilation & Suction system for Corona Treatment - Primer Station before printing for tape printing preparing - Ventilation & Suction system for Primer Station 3 Printing Stations complete with metal screened rollers and printing cylinders with gears for 150,7 mm print repeat -Release Station after printing - Ventilation & Suction system for Release Station -Pressure roller for Release Station - Slitting station with razor blades on the adhesive size - Twin furrets re-winders with 2 mandrels for 3" i.d. cores - Pneumatic pump for automatic Primer and Release feeding - 9 additional different cliché cylinders with gears 3 x 260 3 x 280 3x Z100 - Cliché mounting device - Set of spacers for slitting blade holders setting - 152 mm rubber roller for full coating - 50 mm. paper tab dispenser + 30.000 paper tabs - Set of spare parts Gjdpewq Ay Isfx Afiskc + Bonus Flexo plate Machine (water based) Price: €74.000

Condition: used, Year of construction: 2001, Technical details: pressure: 250 t throat: 360 mm distance table/ram: 800 mm max. ram stroke: 500 mm ram speed - reverse: 390 mm/sec. ram speed - forward: 450 mm/sec. hydraulic-pressure: 280 bar connected load: 43 kW work speed: 11....50 mm/s operating pressure: 20 MPa Gkjdpfexna Uzjx Afiec total power requirement: 20,5 kW weight of the machine ca.: 17 t dimension machine xH: 3,9 x 1,9 x 4,0 m

Condition: used, Year of construction: 1996, Press area: 3000mm x 2100mm Pressing depth: Press elements vertical: 6 Gjdpswv Ncmsfx Afiskc Pressure build-up: manual hydraulic Pressing pressure: Cylinder stroke: approx. 100mm Machine length: 3000mm Machine width: 800mm Machine height: 2500mm Weight: 2000kg

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical specifications: Fully equipped in standard version with: - Robust, torsion-free steel frame, welded and bolted construction - Lamella pressure beam TOP with 6 elements, lamella pressure beam SIDE with 5 elements - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly compressed carcass joints - Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates - Continuous pressing surface, height 95 mm, on lower vertical pressure beam - Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance ball nuts with grease reservoir - The pressing process is carried out electromotorically, via 2 independent worm gear motors (2 x 0.75 kW) - Pressing force of the pressure beams is infinitely variable and electronically controlled by 2 potentiometers, regulated via frequency inverter, ensuring absolutely wear-free force control - Pressing force for horizontal pressure beam: min. 500 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing force for vertical pressure beam: min. 300 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing and adjustment speed of the beams with fine positioning, using 3-stage selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcasses at 45° - Simplest operation via 6 separate push buttons, 8 movement cycles selectable via control panel - Freely adjustable press time preselection 0-30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressure beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm Including surcharge for rapid traverse speed, for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec, the sensors can be deactivated for pressing special components Including a set of machine feet for 500 mm working height Gkjdpjw Nafkofx Afisc Location: Flörsheim Availability: Short-term

Year of construction: 2006, condition: ready for operation (used), General Data Measurements width 2550 mm Measurements depth 5450 mm Measurements height 3150 mm Machine weight 24500 kg Main Drive Pressing force 400 t Stroke 300 mm This ERMAK CNC HAP 4100x400 was manufactured in 2006. It features a CYBELEC DNC 60 control system, a maximum working length of 4100 mm, and a press force of 400 t. The internal distance between columns is 3550 mm, and it includes a laser safety system. Consider the opportunity to buy this ERMAK CNC HAP 4100x400 hydraulic press. Contact us for more information about this machine. Gkodpfxjxnd Tho Afisc Application Types Bending

Year of construction: 2021, condition: excellent (used), For sale: Metal Stamping Press ALP-25J (25T, 2021) Condition: Virtually unused, like new. Manufacturer: JINAOLAN Machinery (China) Model: ALP-25J Year of manufacture: 2021-04 A compact and reliable mechanical eccentric stamping press designed for forming, punching, and stamping a wide range of metal components. Technical specifications: Nominal capacity: 25 T Stroke: 100 mm Stroke rate: 100 strokes/min (SPM) Max. die height: 260 mm Height adjustment: 55 mm Ram working area: 560 × 370 mm Bolster area: 250 × 220 mm Country of origin: China Gjdpfoxm U S Sex Afijkc Applications: The ALP-25J press is suitable for: - Stamping, cutting, bending, and forming metal components - Small press operations in tool, metal structure, and automotive part manufacturing - Working with thin and medium-thickness sheet metal If you have any further questions, we will be happy to answer them.

Condition: excellent (used), Year of manufacture: 2005 Serial number: 8293 Press force: 120 t Bending length: 3100 mm Max. stroke: 260 mm Operating pressure: 240 bar Gedpfoxna S Hex Afiokc Motor power: 11 kW Power supply: 400 V / 50 Hz / 3 phases Machine weight: 7,500 kg Machine dimensions (L x W x H): 3550 x 1800 x 2800 mm

Condition: used, Year of construction: 2016, Assembly in 2017, consisting of: unwinding and rewinding unit (unwinder/rewinder), each with SIEMENS control system including touch panel, FANUC R2000ic 210f loading robot, control unit (for print unit setup), 8 color printing units (left tower, central tower, right tower). Weight: 16/35/18 t, BST edge guiding system, AHLBRANDT surface treatment (corona station), extraction unit, 5 web tension units, web break sensor, inspection table, BST eltromat register control, serial no.: WA18911, RITTAL control cabinet, PSI electron beam unit with switching and cooling system, pressure vessel, oxygen analysis, BST eltromat web monitoring system, BST eltromat visual defect detection system, year of manufacture: 2017, platform, staircase, mounted control cabinet (for corona station), serial no.: 513783, power: 8 kW, control center (container design), various MITSUBISHI climate control units, specialized media supply (water, electricity, nitrogen, compressed air), central SIEMENS control system, safety fencing, light barriers, total weight approx. 110 t. Gkodpfxoxnafas Afiec

Condition: used, Year of construction: 2012, operating hours: 25,000 h, total length: 5,250 mm, total width: 2,350 mm, total height: 2,750 mm, Weight: 12.500 kg Price: On request - Year: 2012 - Documentation available: No - CE marking present: Yes - Serial number: 7336127126 - Operating hours: 25000 - Distance between columns: 3600mm - Number of axes: 4 - Back gauge: 0 - Power: 175.0ton - Max. working width: 4050mm - Max. stroke: 255mm - Control type: DNC 880S - Motor power: 18.5kW - Transport dimensions: 5250mm x 2350mm x 2750mm (l x w x h) - Transport weight [kg]: 12500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Gksdpfxowmf Efj Afiec Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: Z293-068, overall weight: 32,000 kg, table width: 1,500 mm, table length: 2,500 mm, pressing force: 407 t, control type: CNC control, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Table width: 1,500 mm Table length: 2,500 mm MACHINE DETAILS Hydraulic pressure: 320 bar Nominal force: 2 x 2,000 kN Electrical data Operating voltage: 400 V Frequency: 50 Hz Control voltage: 230 V Connection: 240 kW Rated current: 100 A Gedpfxjxm R S Is Afiokc Dimensions & weight Dimensions: 5,000 x 4,000 x 3,800 mm Weight: 32,000 kg EQUIPMENT CNC control Cooling unit Filter extraction HILMA console extension (1,600 mm)

Condition: ready for operation (used), Year of construction: 2001, Main Drive Number of axis 5 Additional Equipment Top drive concept in two-cylinder design y1/y2 Electro-hydraulic ram drive with proportional valve technology Ram travel measuring system with spring deflection compensation via glass scales Modern block hydraulics Cnc backgauge system Safe finger adjustment from the front Self-centring, manual, hardened upper tool holder for vertical tool change Hardened, manual lower tool holder Programme-controlled lower tool displacement (i-axis) for 2 positions Modern protective cover Main Drive Number of axis 5 Additional Equipment Top drive concept in two-cylinder design y1/y2 Electro-hydraulic ram drive with proportional valve technology Ram travel measuring system with spring deflection compensation via glass scales Modern block hydraulics Cnc backgauge system Safe finger adjustment from the front Self-centring, manual, hardened upper tool holder for vertical tool change Hardened, manual lower tool holder Programme-controlled lower tool displacement (i-axis) for 2 positions Modern protective cover Gjdpfx Afow Nb Ndoiekc This 5-axis TRUMPF TrumaBend V85 press brake was manufactured in 2001. It features an electro-hydraulic ram drive, CNC backgauge system, and a modern protective cover. The machine includes a 4-axis back gauge system and both hydraulic upper and lower tool clamping. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V85 machine we have for sale. Contact us for more information about this machine. Application Types Bending

Condition: used, Year of construction: 2020, functionality: fully functional, For sale: Metal Stamping Press ALP-25C (25T, 2020) Condition: Virtually unused, like new. Manufacturer: JINAOLAN Machinery (China) Model: ALP-25C Year of manufacture: 2020-11 A compact and reliable mechanical eccentric stamping press designed for forming, punching, and stamping various metal parts. Technical specifications: Nominal capacity: 25 T Stroke: 45 mm Stroke rate: 145 strokes/min (SPM) Max. die height: 180 mm Height adjustment: 35 mm Ram working area: 170 × 150 mm Bolster area: 370 × 240 mm Country of origin: China Applications: Gjdoxmwnispfx Afijkc The ALP-25C press is suitable for: stamping, cutting, bending, and forming metal parts; small pressing operations in tool, metal structure, and automotive parts manufacturing; working with thin and medium-gauge sheet metal. If you have any further questions, please feel free to contact us.

Condition: excellent (used), Year of manufacture: 2007 Pressing force: 150 tons Bending length: 3100 mm Maximum stroke: 260 mm Gksdpewczxaofx Afisc Working pressure: 240 bar Motor power: 11 kW Power supply: 400 V / 50 Hz / 3 phase Machine weight: 10,000 kg

Year of construction: 2009, condition: used, comprising: 1 vacuum press with heating BÜRKLE type: M8, year of manufacture: 2009, serial no.: , dimensions (WxHxD): approx. 300x180x200 cm, 2 loading tables dimensions (WxHxD): approx. 300x100x180 cm, for alternating loading, 2 film cutters, dimensions (WxHxD): approx. 50x100x200 cm, 2 paternoster racks, dimensions (WxHxD): approx. 100x250x200 cm, with mandrels for film rolls, 1 vacuum pump Gkjdoxnam Rspfx Afioc

Condition: ready for operation (used), Year of construction: 2000, operating hours: 99,800 h, General Data Measurements height 2200 mm Control Unit Gsdpfx Aswfiifofiekc Model TRUMPF CNC TRUMAGRAPH CC220S Main Drive Punching force 220 kN Number of axis 2 Media Main electronic connection 17 kVA / 50 Hz This TRUMPF Trumatic 500 was manufactured in 2000. A robust CNC punch press, it offers reliable performance for your punching needs. Consider the opportunity to buy this TRUMPF Trumatic 500 CNC punch press. Contact us for more information about this machine. Application Types Punching

Condition: excellent (used), Year of manufacture: 2007 Pressing force: 150 tons Bending length: 3100 mm Godpfxoxna Ize Afiokc Maximum stroke: 260 mm Working pressure: 240 bar Motor power: 11 kW Power supply: 400 V / 50 Hz / 3 phase Machine weight: 10,000 kg

Year of construction: 2007, condition: used, comprising: 1 heated vacuum press BÜRKLE Type: BTF 1528-1400 Year of manufacture: 2007 Serial No.: 11507-20, dimensions (WxHxD): approx. 350x200x200 cm, table surface approx. 280x170 cm; 1 lifting platen table BÜRKLE Serial No.: 11507-30, with 2 support plates, dimensions (WxHxD): approx. 300x140x200 cm; 1 turning table BÜRKLE, for support plates, Serial No.: 11507-10, dimensions (WxHxD): approx. 400x320x200 cm; 1 BÜRKLE film unwinder Serial No.: 8669-71 with cutting device; 1 KRAFT paternoster storage rack Type: 810-41-00001 Year: 1991 Serial No.: 19603016, dimensions (WxHxD): approx. 220x380x150 cm; 1 BÜRKLE panel table for shaped parts, dimensions (WxHxD): approx. 350x120x180 cm; 1 film unwinder stand; 2 safety light barriers; control cabinets; 1 pressure/vacuum tank approx. 1,500 ltr.; 1 BÜRKLE terminal; 1 HP flat screen, keyboard and mouse. Supply does not include stock of coating film, the remaining material stock is to be properly decommissioned by the buyer as instructed. Gsdpfoxnam Dox Afijkc

Condition: ready for operation (used), Year of construction: 2000, operating hours: 39,700 h, Control Unit Brand DELEM Model DA 65 Additional Equipment Gkedpfx Aoxnd Ufofiec CNC electro-hydraulic press brake / CNC Control Model: DELEM CNC control model DA 65 / Swivel control panel, front left / 2D graphic programming & product display / Tool & program library / CNC Controlled Axes: Y1 + Y2 / X / R / Z1 + Z2 / I axis / CNC Controlled Backgauge (X axis) / CNC-Controlled Height Adjustment of the Backgauge (R axis) / CNC-Controlled Adjustment of the Fence Fingers (Z axis) / CNC-Controlled, Pneumatic Die Adjustment (I axis) / WILA Manual Table Crowning, incl. Analog Value Display / TRUMPF Hydraulic Upper Tool Clamping / TRUMPF Manual Lower Die Clamping / 1x Free-Moving 2-Hand / Foot Control / Rear Safety Device (Sliding Door) This 4-axis TRUMPF TrumaBend V130 press brake was manufactured in 2000. It features a CNC electro-hydraulic system with DELEM CNC control, offering precise bending with a pressure of 130 tons and a folding length of 3060 mm. The machine includes multiple CNC-controlled axes for enhanced flexibility and accuracy in operation. Consider the opportunity to buy this TRUMPF TrumaBend V130 press brake. Contact us for more information about this machine. Application Types Bending

Condition: ready for operation (used), Year of construction: 2012, operating hours: 4,000 h, General Data Machine weight 19200 KG This 4-axis TRUMPF TruBend 5230 press brake was manufactured in 2012. It features a maximum press force of 2,300 kN, a bending length of 4,250 mm, and a stroke of up to 445.0 mm. Equipped with TASC 6000 control and hydraulic upper tool clamping, it's ideal for precise bending operations. Consider the opportunity to buy this TRUMPF TruBend 5230 press brake. Contact us for more information about this machine. Application Types Gedpjxnd S Djfx Afijkc Bending

Condition: ready for operation (used), Year of construction: 1998, operating hours: 34,327 h, This 5-axis TRUMPF TrumaBend V130 press brake was manufactured in 1998. It features a 3-meter bending length and a 130-ton capacity, with a stroke of 215mm. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V130 machine we have for sale. Contact us for more information about this machine. Gsdpoxnd Tbjfx Afiskc Application Types Bending

Year of construction: 2018, condition: ready for operation (used), This MILLUTENSIL MIL 163 was manufactured in 2018. A robust hydraulic press with a table size of 2000 mm by 1200 mm, it can handle a maximum load of 5000 kg and exerts up to 163 tons of pressure. Ideal for applications like mold adjustment, injection molding, and die casting. Control is manual or semi-automatic. Contact us for more information. Gksdpfx Afoxnd Sdjijc Application Types Bending