Used C Gestell Presse for sale (64,126)

Condition: used, Year of construction: 2021, machine/vehicle number: HB 2022-A-073, pressing force: 300 t, Portal straightening press with 300 T capacity a) idle and pressing speed up to 17 mm/sec. b) opening speed up to 55 mm/sec c) table size 2500x1600mm d) open height 700 mm e) total size approx. LBH 4500 x 2300 x 3700 mm f) Oil temperature indicator on the tank g) Lubrication via grease nipple h) table in grid construction,with T grooves according to customer's request, otherwise 22mm i) operation on swivel arm, mounted on the bridge j) pressure adjustment from 50 T to 300 T via MONITOR k) bridge moves by two gear motors, via racks l) Cylinder moves to the left and to the right via toothed racks m) Machine body double painted n) Cylinder induction hardened Type of construction Press design PORTAL PRESS Thermally neutral 80 - 120 °C Number of operating sides 3 side Forces Pressing force max. 3,000 kN Free ripping force max. 500 kN Pressure build-up time Closed die Steel to steel Max. 3 sec. Dimensions Max. Opening width 700 mm Stroke and min. opening 700 mm/ 0 mm Table height above floor approx. 9ß0 mm Height above floor (headroom) approx. 3700 mm Hall height min. 5.000 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.8 mm/m Weight Total weight of press without operating materials and table plate approx. 22 T Speeds Fast closing with 17 mm sec. Pressing speed 8 mm sec. Opening 55 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel after max. 78 db(A) DIN 45635-T16-KL3 Hydraulics Number of pressing cylinders 1 pc. Operating pressure max. 350 bar Pressing pressure build-up time 02. mz sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump Hedpfx Aoh Agnuegfoff BOSCHREXROTH approx. 93 L/min Oil volume approx. HLPD 46 MW 900 liters Ambient temperature max. 45 °C Oil temperature max. 55 °C Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Hydraulic connection Main motor IE3 22 kW Total connection Approx. 30 kW

Condition: as good as new (ex-display), Year of construction: 2021, pressing force: 400 t, Gantry straightening press with 400 T capacity a) idle and pressing speed up to 17 mm/sec. b) opening speed up to 60 mm/sec c) table size 6000x3000mm d) open height 1500 mm e) total size approx. LBH 6000 x 5000 x 4500 mm f) Oil temperature indicator on the tank g) Lubrication via grease nipple h) Table in grid construction, i) operation on swivel arm, mounted on the bridge j) pressure adjustment from 60 T to 400 T via MONITOR k) Bridge moves by two gear motors, via toothed racks l) Cylinder moves to the left and right via toothed racks m) Machine body powder coated, or double painted n) T-slots according to customer requirements o) cylinder induction hardened PORTAL PRESS Hfsdpfx Ashyc Nwogfsf Thermally neutral 80 - 120 °C Number of operating sides 3 side Forces Pressing force max. 4000 kN Free ripping force max. 600 kN Pressure build-up time Closed die Steel to steel Max. 3 sec. Dimensions Max. Opening width 1500 mm Stroke and min. opening 1500 mm/ 0 mm Table height above floor approx. 900 mm Height above floor (headroom) approx. 4500 mm Hall height min. 5500 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.8 mm/m Weight Total weight of press without operating materials and table plate approx. 52 T Speeds Fast closing with 17 mm sec. Sound pressure Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders 1 pc. Operating pressure max. 280 bar Pressing pressure build-up time 2-3 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH approx. 150 L/min Oil volume approx. HLPD 46 MW 900 liters Ambient temperature max. 45 °C Oil temperature max. 55 °C Electrical system Main supply 400 V AC Control voltage 24V DC Frequency 50 Hz Connection hydraulics Main motor IE3 30 kW Total connection Approx. 35 kW

Condition: new, pressing force: 400 t, pressure:400 t distance between columns:3400 mm stroke:500 mm total power requirement:55 kW weight of the machine ca.:49 t Hfodpfx Agefhcc Rjfof draw back pressure:26 t pump capacity:131 Lt./min dimensions:7.900 x 5.500 x 4.300 mm :5000 mm :2800 mm table height over floor:700 mm distance between table / ram:1000 mm :700 l traversing speed:0-33 mm/sec. down speed:0-10 mm/sec :0-25 mm/sec.

Condition: new, Year of construction: 2026, machine/vehicle number: -, functionality: fully functional, pressing force: 40 t, Portal Straightening Press – Manufacturer Hidrobrasil – 40 t Gantry Press – Table 635 × 555 mm For sale is a portal straightening press by Hidrobrasil, offering a pressing force of 40 t. This machine is based on a proven design, can be newly manufactured at short notice, and individually customized. It is ideal for straightening, assembly, pressing-in, and pushing-out operations. ==== Technical Data & Information: Portal Straightening Press Hidrobrasil – 40 t Gantry Press ==== General Information - Manufacturer: Hidrobrasil - Model: Portal Straightening Press - Design: Gantry / Frame Press - Pressing force: 40 t - Machine weight: approx. 1,500 kg - Dimensions (W × D × H): 1,880 × 900 × 2,300 mm ==== Working Area - Max. opening width: 500 mm - Table-to-floor distance: 1,200 mm - Column spacing: 900 mm ==== Table System - Table size: 635 × 555 mm - Table thickness: 70 mm - Versions: open, closed, or with T-slots (optional) ==== Hydraulic Cylinder - Stroke: 550 mm - Cylinder diameter: Ø 150 mm - Piston rod: Ø 90 mm - Operating pressure: max. 280 bar ==== Hydraulics - Pump: ASC - Flow rate: 12 l/min - Motor power: 4 kW - Return speed: 16 mm/s - Idle speed: 10 mm/s - Oil tank capacity: 120 l - Hydraulic block / valves: Hydropack - Pressure gauge: manometer - Pressure adjustment: adjustable - Pressure switch: included - Power unit: side-mounted ==== Operation - Hand lever operation - Sensitive speed control - Pressure setting via rotary knob ==== Electrical - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Connected load: approx. 5 kW ==== Control Cabinet - Protection class: IP54 Hsdpfoyia D Rex Agfsff - Reserve space: approx. 30 % - Operating mode selector switch: lockable - Components: Siemens, Allen-Bradley, Sick ==== Equipment and Features - Integrated tool holder in the press ram (up to Ø 250 mm) - Custom table versions available - Construction can be adapted to customer requirements ==== Standards and Documentation - CE documentation - Spare parts lists - Electrical diagrams and parts lists (digital) - Standards: - 2006/42/EC Machinery Directive - 2014/35/EU Low Voltage Directive - 2014/30/EU EMC Directive - EN ISO 16092-1 / -3 - EN 60204-1 - EN ISO 12100 - EN ISO 4413 ==== Straightening, assembly, pressing-in, pushing-out, workshop applications, maintenance, series production Gantry press, straightening press, hydraulic press, workshop press, assembly press, insert press, frame press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized quote. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety requirements. Additionally, our presses surpass Canadian and European safety requirements by fully complying with the national Brazilian safety directive NR 12, which builds upon these standards. Our major strengths are custom machine building and press automation. We offer tailor-made hydraulic presses at surprisingly affordable prices. The hydraulics of our presses predominantly feature components from leading European manufacturers.

Condition: new, Year of construction: 2025, pressing force: 20 t, Straightening Press – Manufacturer Durendus – DCS-20 – 5–20 t C-Frame Single-Column Press – Table 500 × 600 mm For sale is a compact single-column straightening press (C-frame) from Durendus, model DCS-20, equipped with an adjustable pressing force from 5 to 20 t. The machine features a table size of 500 × 600 mm, a maximum installation height of 700 mm, and boasts a robust, low-maintenance design, making it ideal for straightening, assembly, and press-fit operations. ===== Technical Data & Information: Straightening Press Durendus DCS-20 – 5–20 t Single-Column Press ==== General Information - Manufacturer: Durendus - Model: DCS-20 - Design: Single-column press / C-frame - Pressing force: 5 – 20 t (adjustable) - Machine weight: approx. 1,900 kg - Dimensions (W × D × H): 1,150 × 1,250 × 2,469 mm ==== Working Area - Installation height: max. 700 mm - Stroke: 0 – 500 mm (adjustable) - Table height: 800 mm ==== Table and Ram - Table size: 500 × 600 mm - Ram size: 500 × 600 mm - T-slots: DIN 650 – 18 mm (or per customer specification) ==== Hydraulic Cylinder - Cylinder diameter: Ø 100 mm - Piston rod diameter: Ø 60 mm Hfjdpfxoyghvfe Agfsf - Operating pressure: max. 250 bar - Return speed: 50 mm/s - Idle speed: 25 mm/s - Pressure build-up time: max. 2 s (steel on steel) ==== Hydraulics - Hydraulic pump: Rexroth, 11 l/min - Motor power: 4 kW - Oil tank volume: 150 l - Hydraulic block / valves: Hydropack - Filter: Filtrec - Oil level monitoring: electronic oil level switch - Hydraulic unit: mounted top rear - Pressure accuracy: ± 5 bar ==== Electrical - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Connected load: approx. 4 kW ===== Straightening work, assembly work, press-fit operations, workshop applications, maintenance, small-batch production Straightening press, single-column press, C-frame press, hydraulic press, workshop press, assembly press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured in compliance with German machinery guidelines, as well as European Machinery Directive 2006/42/EC, EC standards, and EU safety regulations. Additionally, our presses exceed Canadian and European safety requirements by fully complying with Brazil's national safety standard NR 12, which is based on these requirements. Our greatest strength is special-purpose machine construction and press automation. We offer tailor-made hydraulic presses at surprisingly attractive prices. For the hydraulics, we predominantly use components from leading European manufacturers.

Condition: new, Year of construction: 2025, pressing force: 20 t, Forging Press – Manufacturer Durendus – DCS-20 – 5–20 t C-Frame Press – Table 500 × 600 mm For sale is a compact single-column forging press (C-frame) from the manufacturer Durendus, model DCS-20, with an adjustable pressing force of 5 to 20 t. This machine features a table size of 500 × 600 mm, a maximum installation height of 700 mm, high traverse speeds, and is ideally suited for small-scale forging, forming, and assembly work. ===== Technical Data & Information: Forging Press Durendus DCS-20 – 5–20 t Single-Column Press ==== General Information - Manufacturer: Durendus - Model: DCS-20 - Design: Single-column press / C-frame - Pressing force: 5 – 20 t (adjustable) - Machine weight: approx. 1,900 kg - Dimensions (W × D × H): 1,450 × 1,500 × 2,400 mm ==== Working Area - Max. installation height: 700 mm - Stroke: 0 – 500 mm (adjustable) - Table height: 800 mm ==== Table and Ram - Table size: 500 × 600 mm - Ram size: 500 × 600 mm - T-slots: DIN 650 – 18 mm (or as per customer specification) ==== Hydraulic Cylinder - Cylinder diameter: Ø 90 mm - Piston rod diameter: Ø 60 mm - Rapid traverse cylinder: Ø 40 mm - Rapid traverse piston rod: Ø 25 mm - Operating pressure: max. 250 bar (adjustable) ==== Speeds - Return speed: 140 mm/s - Idle speed: 140 mm/s - Pressing speed: 4 – 10 mm/s (adjustable) - Pressure build-up time: max. 2 s (steel on steel) ==== Hydraulics - Hydraulic pump: Rexroth, 22 l/min - Motor power: 7.5 kW - Oil tank capacity: 150 l - Hydraulic block / valves: Hydropack - Filter: Filtrec - Oil level monitoring: electronic oil level switch - Hydraulic power unit: mounted at the upper rear ==== Electrical - Main power supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Connected load: approx. 10 kW ===== Forging, forming technology, assembly work, small batch production, workshop applications, metalworking Forging press, single-column press, C-frame press, hydraulic press, forming press, workshop press, small press Are you looking for a hydraulic press tailored to your application? Contact us for a customized quote. Our hydraulic presses are manufactured according to German machinery directives, as well as European machine guidelines (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety requirements as they fully comply with the Brazilian national safety directive NR 12, which is based on these standards. Our key strengths are special machine construction and press automation. We supply custom-made hydraulic presses at surprisingly affordable prices. The hydraulic systems of our presses are predominantly equipped with components from leading European manufacturers. Hsdpoyght Rsfx Agfoff

Condition: new, Year of construction: 2025, pressing force: 110 t, Hidrobrasil Spotting Press – 110 t – Tryout Press – Table 1,200 × 1,000 mm Available for sale is a hydraulic spotting press from the manufacturer Hidrobrasil, offering 110 t pressing force and a versatile table and ram system. The machine features a swiveling and tilting table, a rotatable ram, as well as a maximum opening of 1,300 mm, making it especially suitable for spotting, die tuning, and tryout operations in tool and mold making. ==== Technical Data & Information: Spotting Press Hidrobrasil – Tryout Press – 110 t Hjdpfxev N D Ncs Agfeff ==== General Information - Manufacturer: Hidrobrasil - Model: Spotting Press - Type: Tryout Press / Spotting Press - Pressing Force: 110 t - Machine Weight: approx. 11.5 t - Dimensions (W × H): approx. 2,900 × 3,000 mm ==== Working Area - Maximum Open Height: 1,300 mm - Stroke: 800 mm ==== Table System - Table Size: 1,200 × 1,000 mm - Table extendable: up to 1,000 mm - Table rotatable: 180° - Table tiltable: up to 75° - Table travel speed: 30 mm/sec ==== Tool Mounting - Ram rotatable: up to 180° ==== Speeds - Downstroke speed: 1–10 mm/sec - Upstroke speed: 25 mm/sec ==== Hydraulics - Hydraulic system: Bosch Rexroth ==== Control and Electrics - Control: Siemens S7-1200 - Control cabinet technology: Siemens ==== Features - Manufactured under German supervision in Brazil - CE-compliant design ===== Spotting operations, tool tuning, die tryout, mold making, toolmaking, tryout operations, adjustment processes, flexible tool machining Hydraulic press, spotting press, die trial press, tryout press, production press, industrial press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are built according to German and European machinery directives (Directive 2006/42/EC), conforming to EC standards and EU safety regulations. Furthermore, our presses surpass Canadian and European safety standards, as they fully comply with the Brazilian national safety guideline NR 12, which builds upon these requirements. Our core competence is in custom machine construction and press automation. We supply custom-made hydraulic presses at surprisingly competitive prices. For the hydraulic systems of our presses, we predominantly use components from leading European manufacturers.

Condition: new, Year of construction: 2019, pressing force: 275 t, pressure:275 t distance between columns:3000 mm Hfodpfofxyigsx Agfsf total power requirement:30 kW weight of the machine ca.:40 t draw back pressure:27 t pump capacity:Axialpumpe mit Proportionalventil :6000 mm :max. 3000 mm Table dimensions:6000 x 3000 mm table height over floor:700 mm distance between table / ram:1100 mm :450 l traversing speed:auf X und Y, 30-33 mm/sec. down speed:2-10 mm/sec :2-50 mm/sec. Cylinder hub:900 mm Cylinder diameter:440 mm Stestle extension:200 / 200 mm / Ø :40 mm Siemens Control System:S7 1200 Monitor Siemens 9":Touch Panel Tax desk:tragbar

Condition: new, machine/vehicle number: DF0178, pressing force: 500 t, pressure:500 t table length:3500 mm table width:3500 mm stroke max.:3600 mm dimensions:8500 x 3700 x 8500 mm return capacity:50 t weight:250 t Fold-down upper tool:180 Grad :max. 33 mm/sec table extendable:3800 mm :33 mm/sec table load:100 t power capacity:65 kW voltage:400 V control voltage:24 kW frequency:50 Hz work speed:0 - 10 mm/sec. pre-running speed:0 - 10 mm/sec return speed:0 - 25 mm/sec :0 - 10 mm/sec :800 l Ram Height:1300 mm table height:700 mm :inklusiv ? :inklusiv ? Hodjfxyh Uopfx Agfjff :inklusiv ? :inklusiv ?

Condition: new, Year of construction: 2019, machine/vehicle number: DF0309, pressing force: 200 t, pressure:200 t table length:2500 mm table width:2000 mm stroke max.:2050 mm dimensions:ca. 9200 x 4700 x 5800 mm draw back pressure:25 t Hodpfxefxyi Ds Agfsff Approx. weight (w/o operational materials):50 t column diameter:210 mm table speed:25 mm/sec table extendable:2000 mm table speed:30 mm/sec table load:15 t power capacity:20 kW work speed:1 - 10 mm/sec. pre-running speed:10 mm/sec :25 mm/sec :10 mm/sec. Oil Tank Capacity:400 l Oil cooling (electric):1,5 kW (max) Podestal height:650 mm Table Height:800 mm Ram Height:850 mm Control System by Siemens:S7 1200 Monitor:WEG 12 Zoll :10200 ? Maintenance Balcony:5000 ? :4.000,-- ? :1.000,-- ? :18000 ? :1.500,-- ? :12000 ? Upper Tool Folding:170 Grad Swivel table:75 Grad Table tiltable:75 Grad Ajecters with 60T in the pestle centre:12000 ? Blessed plate folding by 180 degrees:14000 ?

Condition: new, machine/vehicle number: DF0261 - Rev.00, pressing force: 63 t, pressure:63 t table length:1200 mm table width:1000 mm stroke max.:1050 mm dimensions:ca. 3350 x 1800 x 4700 mm Hsdpfsfhcc Sex Agfoff draw back pressure:6 t Approx. weight (w/o operational materials):10 t column diameter:120 mm Fold-down upper tool:180 Grad Swivable Table:75 Grad table speed:25 mm/sec Table tilting:75 Grad table extendable:1100 mm table load:5 t Engine Output:10 kW Oil Tank Capacity:200 l Oil cooling (electric):1,5 kW (max) Monitor:(WEG) 12 Zoll

Condition: as good as new (ex-display), Year of construction: 2015, pressing force: 63 t, pressure:63 t table length:700 mm table width:1000 mm weight of the machine ca.:ca. 9 t dimensions of the machine ca.:4500 x 4300 x 2700 m :1 Stück stroke length max.:1200 mm Hjdsffamqopfx Agfeff daylight dimension : table/slide up:1200 mm table height:700 mm :um 1200 mm :um 45 Grad :um 170 Grad :1250 x 1000 mm table load:5 t :25 mm/sec pre-running speed:95 mm/sec return speed:80 mm/sec work speed:von 0 bis 10 mm/sec.

Condition: new, Year of construction: 2019, pressing force: 400 t, pressure:400 t distance between columns:2500 mm stroke:600 mm Hfsdpsd Ttydefx Agfsf Table dimensions:2500 x 2000 mm distance table - lower edge of ram:600 mm total power requirement:18 kW speed of forward flow:9 mm/sec Return Speed:19 mm/sec :67 Lt./min. Total weight, approx.:26 t

Condition: used, Year of construction: 2015, machine/vehicle number: 4273, pressing force: 110 t, pressure:110 t table length:1200 mm table width:1000 mm stroke max.:1150 mm dimensions:4200 x 2400 x 4800 mm draw back pressure:11 t stroke max.:1150 mm weight:16 t stroke of the table:1200 mm swivable table::45 Grad table load:12 t table speed:25 mm/sec Hfodpfjd Ap Ugsx Agfjf table speed:10 mm/sec power capacity:23 kW voltage:400 V control voltage:24 V DC frequency:50 Hz work speed:0 - 10 mm/sec. :130 mm/sec :195 mm/sec. Colour:Grau 7035 RAL Colour:Orange 2009 RAL Colour:Dunkelgrau 7021 RAL Oil tank capacity:400 l Recommended oil:DIN HLP / ISO VG 46

Condition: new, Year of construction: 2018, machine/vehicle number: DF0163, pressing force: 800 t, pressure:800 t distance between columns:1200 mm Hfodpfx Agjdxvfpjfjf stroke:500 mm total power requirement:85 kW weight of the machine ca.:40 t dimensions:4100 x 3500 x 6650 mm draw back pressure:80 t Master cylinder:1 Stück column diameter:250 mm dayligth:1000 mm Table dimensions:1300 x 1100 mm ram surface:1300 x 1100 mm :800 mm table height over floor:950 mm table load:5 t pre-running speed:250 mm/sec return speed:150 mm/sec :1000 l :10 mm/sec :inbegriffen ? :inbegriffen ? :inbegriffen ? :inbegriffen ? :inbegriffen (800 x 530mm) ? :inbegriffen (800 x 530mm) ?

Condition: used, Year of construction: 2019, pressing force: 200 t, pressure:200 t stroke:800 mm total power requirement:25 kW draw back pressure:16 t :1 Stück Column-Diameter:150 mm dayligth:1200 mm Hfsdpfx Aod E Irlogfof Ram Height:1000 mm Ram size:1300 x 2220 mm table surface area:1500 x 1300 mm :1300 x 2220 mm :820 mm table surface area:1500 x 1300 mm table height:800 mm table load:8 t pre-running speed:1 - 9,8 mm/sec return speed:2,5 - 25 mm mm/sec quantity of oil:300 l weight of the machine ca.:17 t Dimensions (L/W/H):2420 x 1300 x 4782 mm :0 - 200 T :1 - 10 mm :elektrisch

Condition: as good as new (ex-display), Year of construction: 2015, machine/vehicle number: 4293, pressing force: 40 t, pressure:40 t table length:1000 mm table width:700 mm daylight opening:1200 mm No. of Cylinders:1 St. stroke length max.:1200 mm table height over floor:700 mm table extendable:1200 mm Speed of table:25 mm/sec Table tilting:45 Grad table load:5 t Fold-down upper tool:170 Grad Hfjdedxrqxepfx Agfef :1250 x 1000 mm :95 mm/sec speed of return flow:80 mm/sec working speed:0 - 10 / 10 - 155 mm/sec dimensions:4300 x 2700 x 4500 mm total weight:8,5 t Monitor Siemens:9 Zoll :1200 mm

Condition: used, mileage: 21,500 km, power: 290 kW (394.29 HP), first registration: 09/2020, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 7,450 mm, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, ACTROS 1840 L 6-Seater BDF Swap Body Chassis * L-cab StreamSpace, 2.30 m wide, 170 mm tunnel * ORIGINAL mileage approx. 21,500 km * Vehicle number for customer inquiries: 4635 * MirrorCam * Predictive Powertrain Control * Turn Assist * Automatic high/low beam and cornering light * Rear axle differential lock * Air conditioning * L-cab StreamSpace, 2.30 m, 170 mm tunnel * Engine: EURO VI, D * Navigation system * Seat-bed combination, 1 bunk * Lane Keeping Assist * Emissions sticker (green) * Traffic Sign Assist * Towing hitch standard, D40, Ringfeder * Attention Assist * Electric sunroof * High performance engine brake Hsdeyt Tqhspfx Agfsff * L-cab * Light sensor * Rear axle air suspension * Multimedia Cockpit, interactive * Rain sensor * Full service history * Stability Control Assist (ESP) * Tank 500 l, left, 650 x 565 x 1600 mm, aluminium * Front axle air suspension * Additional hot-water heater, cab * Swap body frame, 715/745 cm, height = 132 cm * Active Brake Assist 5 * Actros * Actros Model Generation 5 * Trailer brake, 2-line, brake connections left * Trailer socket 24 V, 15-pin * Chrome package, interior * Air horn * Electronic braking system with ABS and ASR * Comfort driver's suspension seat * Electronic parking brake * Transmission G 211-12/14.93-1.0 * Mercedes PowerShift 3 * Reversing warning system integrated with hazard lights * Central locking system * Six-seater * Exterior sun visor, transparent * Cruise control * Pre-installation for Mercedes-Benz Truck App Portal * Overhead storage flaps above windscreen * AdBlue tank 60 l, left * Heater, electronic air supply unit * Engine OM470, R6, 10.7 l, 290 kW (394 hp), 1,900 Nm * Wheelbase 5500 mm * Tubeless tyres, 315/70 R 22.5 rear axle * Tubeless tyres, 315/70 R 22.5 front/leading/non-driven axle * CB radio pre-fit, 12 V, DIN slot * Weight option 18.0 t (8.0/13.0) * Comfort telephony, wireless charging * Digital tachograph, 2nd generation * 2/3 doors No liability for printing or typing errors Sale to commercial customers only Subject to errors and prior sale. Modifications, prior sale and errors expressly reserved. The description is for vehicle identification only and does not represent a warranty in the sense of sales law. The description in the purchase contract is binding. * TOP SERVICE + QUALITY * We are happy to offer you LEASE–FINANCE–HIRE PURCHASE deals Warranty insurance available on request from the insurer * TÜV / UVV LBW / tachograph inspection and OBU installation through our local partners * 30-day export plates All export documentation possible upon request, but must be requested individually * Toll-Collect toll payment available on site * Free transfer from Stuttgart airport or Metzingen station (Württ) * ARRIVAL TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * * ---- Visit us on our website * Constantly over 200 vehicles in stock

Condition: used, mileage: 21,500 km, power: 290 kW (394.29 HP), first registration: 09/2020, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 7,450 mm, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, ACTROS 1840 L 6-Seater BDF Swap Body Chassis * L-Cab StreamSpace, 2.30 m, tunnel 170 mm * ORIGINAL mileage approx. 21,500 km * Vehicle number for customer inquiries: 4635 * MirrorCam * Predictive Powertrain Control * Turning Assist * Automatic high/low beam and cornering lights * Rear axle differential lock * Air conditioning * L-Cab StreamSpace, 2.30 m, tunnel 170 mm * Engine version EURO VI, D * Navigation system * Seat/bed combination, 1 bed * Lane Keeping Assist * Environmental badge (green) * Traffic Sign Assist * Standard trailer coupling, D40, Ringfeder * Attention Assist * Electrically operated sunroof * High Performance Engine Brake * L-Cab * Light sensor * Air suspension, rear axle * Interactive multimedia cockpit * Rain sensor * Full service history * Electronic Stability Program (ESP) * Tank 500 l, left side, 650 x 565 x 1600 mm, aluminum * Front axle air suspended * Additional hot water heater, cab * Swap body frame, 715/745 cm H=132 cm * Active Brake Assist 5 * Actros * Actros model generation 5 * Trailer brake, dual-line, left brake couplings * 24 V trailer socket, 15-pin * Interior chrome package * Air horn * Electronic braking system with ABS and ASR * Comfort driver's suspension seat * Electronic parking brake * Transmission G 211-12/14.93-1.0 * Mercedes PowerShift 3 * Reverse warning system combined with hazard flasher * Central locking system * Six-seater * Exterior sun visor, transparent * Cruise control * Pre-installed Mercedes-Benz Truck App Portal * Over-windshield storage compartments * AdBlue tank 60 l, left * Electronic air supply unit for heating * Engine: OM470, R6, 10.7 l, 290 kW (394 hp), 1900 Nm * Wheelbase 5500 mm * Tubeless tires, 315/70 R 22.5 rear axle * Tubeless tires, 315/70 R 22.5 front axle/mid axle/leading axle * CB radio preparation, 12 V, DIN slot * Weight variant 18.0 t (8.0/13.0) * Comfort telephony, wireless charging * Digital tachograph, 2nd generation * 2/3 doors No liability for typographical or transcription errors Sale only to commercial customers Errors and prior sale excepted - subject to change. The description serves to identify the vehicle and does not constitute a guarantee in the legal sense of a sales warranty. The description in the purchase contract is decisive. * TOP SERVICE + QUALITY * We are happy to make you a LEASING-FINANCING-HIRE PURCHASE offer Guarantee insurance possible on request from insurer * TÜV / UVV tail lift / tachograph inspection and installation of OBU device by our local partners * Export license plates for 30 days Hfodpfx Aoyt Tqbogfjf All export documentation possible, but must be requested individually * Toll-Collect toll registration can be arranged in-house * Free transfer from Stuttgart Airport or Metzingen (Württ) train station * ARRIVAL TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * * --- Visit us on our website at * Over 200 vehicles in stock at all times

Year of construction: 2015, condition: excellent (used), functionality: fully functional, machine/vehicle number: ODW 2687/20, CONTINUOUS PRESS FOR SANDWICH PANELS The installation is part of a larger production line; please refer to our other listings for additional components. The plant is fully enclosed and equipped with a walk-on operating platform above the press. WORKPIECE DIMENSIONS (as previously manufactured): Length: 2,000 mm – 8,500 mm Width: 1,500 mm – 2,500 mm Thickness: 12 mm – 60 mm Maximum batch weight: 60 kg (potentially increasable, subject to confirmation with the manufacturer) TECHNICAL DATA: Total pressing force: 4,250 kN Specific pressure: 10 – 20 N/cm² Number of hydraulic cylinders: 16 Hydraulic cylinder diameter: 110 mm Individual cylinder control: Yes Hydraulic operating pressure: 20 – 280 bar Multi-deck opening: 150 mm Maximum operating temperature: 80°C Hfjdpfoyt Rhkex Agfjf Approx. press weight: 57,000 kg Required air pressure: 6 – 10 bar Required extraction volume at air velocity v = 30 m/s: 3,400 m³/h Heat output: 2 x 110,000 kcal/h Heating medium: Hot water Customer-side supply temperature: 85 – 95°C Separate heating for top and bottom heating plates Cooling unit for reheating plates during product changeover INSTALLATION DIMENSIONS: Width: 5,066 mm Length: 9,604 mm Height approx.: 5,013 mm

Condition: used, functionality: fully functional, mileage: 564,000 km, power: 375 kW (509.86 HP), first registration: 08/2010, fuel type: diesel, overall weight: 32,000 kg, axle configuration: 8x4, wheelbase: 3,800 mm, fuel: diesel, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, loading space length: 7,400 mm, Year of construction: 2010, VOLVO FM-510 Tridem 8x4 Euro5 Leaf/air suspension Wheelbase: 3,80m Length loading area : 7,40m 6 cylinders Manual gearbox YV2JG30G9AA695983 Technically in good condition and ready to drive! Hsdpfx Agsix E Azjfjff Tel. 44

Condition: used, length: 2750width: 1100heigth: 2050weight approx.: 3500pressure: 50bending length: 2550 CNC Bending Press 3 Axes Y1, Y2, and Z Hydraulic Tool Clamping for the Upper Tool Darley System Technical Details: Machine Type: EHP 50.25/20 Max. Pressing Force: 500 kN Bending Length: 2550 mm Downward Speed: 100 mm/s Max. Pressing Speed: 13.5 mm/s Return Speed: 75 mm/s Hfedpfxjwiatpe Agfsf Stroke Length: 120 mm Cylinders: 2 pcs Motor Power: 5.5 kW Oil Tank: 100 Liters

Condition: used, mileage: 600,000 km, power: 330 kW (448.67 HP), first registration: 03/2018, fuel type: diesel, empty load weight: 8,259 kg, maximum load weight: 17,741 kg, overall weight: 26,000 kg, axle configuration: 6x2, next inspection (TÜV): 03/2025, fuel: diesel, brakes: retarder, color: blue, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, number of beds: 1, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electronic stability program (ESP), hydraulics, immobilizer system, low noise, navigation system, onboard computer, soot filter, traction control, trailer coupling, truck registration, * very well-maintained German vehicle from 1st hand Hfodpfx Asytg Efsgfef * Vehicle IDNT NR: XLRASM4100G185887 * Tipper body was converted to a new vehicle Technical data: * Total length 7900mm * Total width 2550mm * Total height 3400mm * Gross vehicle weight 26000KG * Empty weight 8259KG Wheelbase: * Axle 1 to 3 = 5200mm * Axle 1 to 2 = 3800mm * Axle 3 to 4 = 1400mm Tires: * 1st axle 385 / 65 R 22.5 approx. 40% * 2nd axle 385 / 65 R 22.5 approx. 50% * 3rd axle 315 / 80 R 22.5 approx. 50% Delivery possible throughout Germany!!! Trade-in possible!!! Leasing and financing also possible without a deposit Subject to errors, misprints and prior sale

Condition: used, mileage: 689,060 km, power: 210 kW (285.52 HP), first registration: 07/2016, fuel type: diesel, empty load weight: 7,700 kg, maximum load weight: 8,300 kg, overall weight: 16,000 kg, axle configuration: 4x2, wheelbase: 5,350 mm, next inspection (TÜV): 07/2025, fuel: diesel, brakes: engine braking, color: blue, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, air conditioning, central locking, cruise control, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, soot filter, spoiler, traction control, trailer coupling, truck registration, * German vehicle from 1st hand * Vehicle IDNT NR: XLRAEL2700L456336 * HU up to * Wheelbase 5350mm Hfsdpfxsytg D Ie Agfjf * Gross vehicle weight 16000KG   Delivery possible throughout Germany !!! Trade-in possible !!! Leasing and financing also possible without a deposit  Subject to errors, misprints and prior sale

Condition: used, mileage: 600,000 km, power: 330 kW (448.67 HP), first registration: 03/2018, fuel type: diesel, empty load weight: 8,259 kg, maximum load weight: 17,741 kg, overall weight: 26,000 kg, axle configuration: 6x2, next inspection (TÜV): 03/2025, fuel: diesel, brakes: retarder, color: blue, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, number of beds: 1, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electronic stability program (ESP), hydraulics, immobilizer system, low noise, navigation system, onboard computer, soot filter, traction control, trailer coupling, truck registration, * very well-maintained German vehicle from 1st hand * Vehicle IDNT NR: XLRASM4100G185887 * Tipper body was converted to a new vehicle Technical data: * Total length 7900mm * Total width 2550mm * Total height 3400mm * Gross vehicle weight 26000KG * Empty weight 8259KG Wheelbase: * Axle 1 to 3 = 5200mm * Axle 1 to 2 = 3800mm * Axle 3 to 4 = 1400mm Tires: * 1st axle 385 / 65 R 22.5 approx. 40% * 2nd axle 385 / 65 R 22.5 approx. 50% * 3rd axle 315 / 80 R 22.5 approx. 50% Delivery possible throughout Germany!!! Trade-in possible!!! Leasing and financing also possible without a deposit Hfedpfx Agoytg D Usfef Subject to errors, misprints and prior sale