Used Butterfly Table for sale (17,188)

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, working width: 230 mm, planing height: 120 mm, spindle diameter: 40 mm, spindle speed (min.): 8,000 rpm, Weinig Powermat 400 4 Spindles 230 x 120 mm All Powerlock with 8000 rpm Feed speed 5–30 m/min Kdodpfez Dvh Hjx Ah Est Bottom 7,5 kW Right + Left combination motor 11,0 kW Top 11,0 kW Radiale CNC controlled setting of width and height in combination with Memory System Infeed table 2,5 m Automatic Waxilitpump Memory System

Condition: used, Year of construction: 2023, dimensions 0,70 x 0,50 x 0,10 m weight 200 kg In our assessment, the zero-point clamping system is in good used condition. Price per piece. 2 pieces available; see photos. Kdjdpfozhpayox Ah Eot Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2022, turning speeds 0,7-9,0 U/min Torque 2,5-10 Nm table load capacity - central/maximum 50 kg welding current 400 A Kedpfx Ahszip Iyj Eodt voltage 230 V

Condition: excellent (used), Altendorf F45 ElmoDrive panel saw Extensive equipment 320cm sliding table, Two-way tilting (+46 to -46 degrees) with motorized adjustment, Motorized up-and-down adjustment of the saw blade, Right-hand rip fence with motorized adjustment up to 1370mm, 2-axis scoring saw with electric adjustment Kjdpfszxc D Hsx Ah Esdt 5.5KW main motor, speed controlled by a frequency inverter, Max. blade diameter 450mm, Electronic display on the rip fence and sliding table, DIGIT-L Year of manufacture: 2023 Very good condition, barely differs from a new machine.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: AB0704, travel distance X-axis: 810 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Siemens Sinumerik 810D, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range X-axis: 810 mm Travel range Y-axis: 610 mm Travel range Z-axis: 610 mm Workpiece weight: max. 1,000 kg Table load: 1,000 kg Spindle speed: max. 8,000 RPM Number of tool positions in the tool magazine: 32 MACHINE DETAILS Control model: Siemens Sinumerik 810D Total weight: 5,000 kg Input voltage: 400 V Type of input current: Three-phase EQUIPMENT Kedpfx Ajzzx Hcoh Esdt CE marking Chip conveyor Spindle speed continuously adjustable 20 bar spindle cooling Paper filter Shopmill Note: The machine has been regularly maintained. One slot in the tool changer is defective.

Condition: used, Year of construction: 1996, machine/vehicle number: 354-0, Offer 26036 Approximate technical data: - Load capacity approx. 3000 kg - Platen diameter 1520 mm - Platen can be tilted by motor - Rotational movement can be continuously adjusted electrically - Welding current transmission 650 A - Power supply 400 V - Table height in horizontal position approx. 1450 mm - Right and left rotation - Hand-held remote control Kdjdpoz Df Hfofx Ah Est - Foot switch - Space requirement approx. W 1700 x H 1500 x D 2300 mm - Weight approx. 2800 kg

Condition: excellent (used), Altendorf F45 ProDrive panel saw 300cm carriage, Kodezypxmepfx Ah Eedt 0-45 degree tilt, and motor-driven blade height adjustment, right-hand rip fence with manual adjustment and electronic display, cutting width 1350mm 0.75KW scoring saw, 2-axis, electrically adjustable With parking function LED lighting during scoring saw operation 5.5KW main motor; 3 cutting speeds max. blade diameter 450mm, Left-hand rip fence on the carriage with angle adjustment Laser line indicator Very good condition

Condition: excellent (used), functionality: fully functional, Premium Sale – Altendorf F 90 Sliding Table Saw (Germany) Industrial Precision. German Engineering. Proven Reliability. For sale: Altendorf F 90 professional sliding table saw, manufactured in Germany in 1994 by Wilhelm Altendorf Maschinenbau – a globally respected name in high-precision woodworking machinery. This is a heavy-duty industrial machine, engineered for continuous operation in furniture manufacturing, carpentry workshops, and joinery plants. ⸻ Kdsdpfx Aoyn Ir Neh Ejt ⚙ Technical Specifications: • Model: F 90 • Year of Manufacture: 1994 • Maximum Blade Diameter: 450 mm • Voltage: 400V / 3-Phase • Current: 11.5 A • Frequency: 50 Hz • Main Motor Power: 5.5 kW • Main Motor Manufacturer: EMOD • Country of Origin: Germany ⸻ ✨ Why Choose This Machine? ✔ Outstanding cutting accuracy ✔ Exceptionally robust industrial design ✔ Smooth and stable sliding table operation ✔ Powerful 5.5 kW motor for demanding tasks ✔ Optimized for high-volume production ✔ Long service life – built to withstand decades of intensive use Altendorf machines are recognized worldwide for their precision, reliability, and strong resale values. This model is a reliable investment for demanding woodworking professionals. ⸻ 🪵 Ideal Applications: • Furniture manufacturing • Cabinetmaking • Custom interior solutions • Panel processing (MDF, particleboard, plywood, solid wood, laminated panels)

Condition: ready for operation (used), Year of construction: 1991, Hofmann TFS 1200 tilting table milling machine Year of manufacture: 1991 Machine no.: P127-91-194-695 Motor: 54.7 / 5.7 - 11 / 13.5 Tilting range: -5° to +45° Motor brake Motor: 2 speeds / pole-reversing 6 speed stages: 3 / 4 / 5 / 6 / 8 / 10,000 rpm Right-hand and left-hand rotation Table size: 2000 x 830 mm Milling arbor diameter: 30 mm Kjdezmcz Iepfx Ah Eodt Milling fence with fine adjustment Height adjustment: manual, with handwheel Tilting adjustment: manual, with handwheel Lateral sliding table for slot and tenon machining Feed device: 3-roller Elu, infinitely adjustable Dust extraction connection: D 2 x 120 mm Space requirement: approx. 2000 x 1600 x 1400 mm Weight: approx. 1000 kg

Condition: used, Year of construction: 2010, functionality: fully functional, The round table with 6 segments is for sale. Kdodpfxjzvux Re Ah Eot

Condition: used, Year of construction: 1984, power: 5.5 kW (7.48 HP), cutting height (max.): 150 mm, cutting width (max.): 1,200 mm, saw blade diameter: 450 mm, tilt adjustment saw blade: 45 °, height adjustment type: hydraulic, saw blade bore: 30 mm, actuation type: hydraulic, overall weight: 1,200 kg, Equipment: saw blade guard, scorer, Cutting length / carriage length 2800 mm Cutting length according to scale 2850 mm Kodpfx Aez At Rleh Eedt Cutting width at parallel fence 1200 mm, manual adjustment Drive motor 5.5 kW, 400 V, 50 Hz Saw blade speed 3/4/5/6000 rpm Max. tool diameter 450 mm Cutting height at 90° = 0-150 mm Cutting height at 45° = 0-107 mm Saw blade swivel with optical angle indicator Speed indicator with optical display Hydraulic height and swivel adjustment via foot pedal Parallel parallelogram guard with narrow and wide guard Dust extraction connection on top 80 mm, dust extraction connection on bottom 120 mm Scoring unit

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Equipment: saw blade guard, scorer, Used panel saw Manufacturer: Altendorf Type: F45 Kdedpfxeztwvaj Ah Eet Year of manufacture: 2010 Cutting length 3200mm. Cutting width 1300mm Maximum cutting height 130mm (saw blade diameter 500mm) Saw blade and scoring saw swivel 0-45° digitally adjustable Saw blade and scoring saw height adjustment digital Parallel fence manually adjustable Double roller carriage, safety guard Switching on the main saw blade and scoring saw from the control panel and/or the machine table Main motor, panel saw 5.5KW (7.5 HP) (adjustable at 3500/4500/5500 rpm) Scoring saw motor, panel saw Duplex miter fence

Condition: defective spare-parts repository (used), Year of construction: 1980, Machine: Type: BFT 90/3at Manufacturer: UNION Year of manufacture: 1980 Control: NC control, HEIDENHAIN TNC 131 Electrical cabinet: by Reliance Machine group: Table-type boring mill Customs tariff number: 84592100 Technical data: Spindle diameter: 102 mm X-axis travel: 1000 mm Y-axis travel: 1250 mm Z-axis travel: 1600 mm Tool holder: ISO 50 DIN 2048 Spindle stroke: 710 mm Spindle speeds: 8 – 1600 rpm Table size: 1000 x 1120 mm Table rotation: 360° Max. workpiece weight: 2,500 kg Feed ranges: 0.8 – 2,000 mm/min Rapid traverse: 3.15 m/min Feed force: 16,000 N Kdodpjygarlofx Ah Ejt Spindle motor: 11 kW Total power requirement: 23 kW Machine weight: approx. 9.3 t Space requirement: approx. 5.3 x 3.8 x 3.14 m Special features and notes: Electronic issue: There is an electronic problem (control board needs to be replaced). The price has been adjusted accordingly (€10,500.00) to account for the necessary repair work. The HEIDENHAIN contouring control and the mechanical components of the machine are in good condition. Inspection is possible by appointment to assess the machine's condition and the extent of the electronic issue. For further technical details, please refer to the attached data sheet. Important information: All information is subject to confirmation, prior sale, errors, and availability. Technical data and all information provided are non-binding and only for orientation purposes. Contact: If interested or to arrange a viewing, please send a message or make an appointment. Disclaimer: The item is sold as described. Returns, warranty, and guarantee are excluded. The buyer agrees that the item is purchased in its current condition, "as seen," with no right of return. No liability is assumed for the accuracy of the information provided in the text or photos. By purchasing this item, you agree to the above-mentioned terms and conditions.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: AB1052, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 410 mm, controller model: Siemens Sinumerik 840D, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 560 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 410 mm Table length: 650 mm Table width: 450 mm Table load capacity: 250 kg Workpiece length: max. 650 mm Workpiece width: max. 450 mm Workpiece height: max. 450 mm Workpiece weight: max. 250 kg Feed rate, X-axis: 30 m/min Feed rate, Y-axis: 30 m/min Feed rate, Z-axis: 30 m/min Accuracy: ±0.015 mm Spindle speed: max. 12,000 rpm MACHINE DETAILS Control system: Siemens Sinumerik 840D Input voltage: 400 V Kdsdpezzx H Ajfx Ah Eet Input current type: Three-phase Dimensions & Weight Dimensions (L x W x H): 2,000 x 3,000 x 2,500 mm Total weight: 4,000 kg EQUIPMENT Oil mist separator Spindle cooling (20 bar) Documentation ShopMill function Note: The machine has been regularly maintained electronically and mechanically. New ball screws and linear guides were installed approximately 2 years ago.

Condition: used, Year of construction: 2013, power: 9.5 kW (12.92 HP), input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,250 mm, number of axes: 3, actuation type: electric, total height: 2,244 mm, total length: 5,240 mm, total width: 2,500 mm, overall weight: 2,700 kg, Equipment: CE marking, We offer this used SCM TECH Z1 machining centre, year of manufacture 2013. Type designation: FORA-FRESATRICE CN Manufacturer: SCM Serial number: AA1/017424 Type: TECH Z1 Model: TECH Z1 Year of manufacture: 2013 Weight: 2,700 kg Rated voltage: 400 V Kedpjyvpp Hefx Ah Ejdt Rated current: 31 A Frequency: 50 Hz Short-circuit current: 10 kA If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: AA1/015841, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 6,050 mm, travel distance Y-axis: 1,240 mm, travel distance Z-axis: 200 mm, number of slots in tool magazine: 12, total length: 7,250 mm, total width: 2,420 mm, overall weight: 4,800 kg, table length: 6,050 mm, table width: 1,240 mm, Equipment: CE marking, SCM RECORD 100 AL XL CNC machining center, manufactured in 2006. A machine from the renowned Italian manufacturer, SCM Group, designed for professional processing of wood, MDF, plywood, chipboard, and other wood-based materials. Model: RECORD 100 AL XL Year of manufacture: 2006 Weight: 4800 kg Power supply: 400 V / 3 phases / 50–60 Hz Rated current: 62 A Technical specifications Working area / axes: X-axis: 6050 mm Y-axis: 1240 mm Z-axis: 200 mm Rapid traverse X: 60 m/min Rapid traverse Y: 45 m/min Rapid traverse Z: 30 m/min Electrospindle: manufacturer: SCM power: 8.5 kW maximum speed: 24,000 rpm tool holder: HSK-F63 automatic tool changer automatic magazine: 12 HSK-F63 tools Drilling unit: 7 vertical spindles 5 horizontal/angled spindles capability for vertical and side drilling Vacuum system: 2 × Becker VTLF 250 vacuum pump Kdsdpfx Ahezynkhs Eet performance of one pump: 248 m³/h at 50 Hz total rated performance: 496 m³/h power of one pump: 5 kW vacuum: 200 mbar Other equipment manual manipulator for machine operation table with vacuum clamping system capability for processing parts with a length of over 6 meters central chip extraction system from the machining head brush guard for the machining head safety mats complete enclosure of the working area CE marking The machine has a large working area of 6050 × 1240 mm, making it suitable for both standard panels and the processing of very long parts. The powerful 8.5 kW / 24,000 rpm / HSK-F63 electrospindle, automatic tool changer, and 12-position HSK magazine allow for the performance of various operations without manual tool changes. An additional advantage is the drilling head equipped with 7 vertical and 5 horizontal spindles, as well as a highly efficient vacuum system with two Becker VTLF 250 pumps with a total rated performance of approximately 496 m³/h. The machine has a solid, industrial-grade construction – weight 4800 kg.

Condition: good (used), Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table, low-profile lift table, scissor lift truck -Manufacturer: Gruse, hydraulic scissor lift table trolley, scissor lift trolley, Hebefix type HF 2 C Kedpfez Ayi Isx Ah Eodt -Load capacity: 500 kg -Platform: 970 x 500 mm -Dimension when retracted: Height 360 mm -Extended dimension: Height 970 mm -Push bars: not included in the scope of delivery -Number: 2x scissor lift trucks available -Price: per piece -Transport dimensions: 1230/600/H360 mm -Weight: 100 kg/unit

Condition: good (used), Year of construction: 2008, functionality: fully functional, overall weight: 1,900 kg, For sale: a very well-maintained Martin T74 panel saw. Features a touch-screen control panel, 5.7 inches. Cutting angle, height, and width are controlled electronically. Motor: 5.5 kW. Saw blade change: quick-change system PRO Lock. No scoring saw. Slider length: 3000 mm. Max. saw blade diameter: 500 mm. Max. cutting height: 170 mm. Cutting width with fence: up to 1,100 mm. Saw blades up to 400 mm in diameter can be fully lowered below the table surface. Weight: 1,900 kg. Technical data sheet is available in the machine images (last image). Kedpfx Ahezrmhie Esdt

Condition: excellent (used), functionality: fully functional, overall weight: 400 kg, We sell directly. Make-Ready Table for Bobst 106 E/ER We offer a professional table for the pre-preparation and alignment of die-cutting tools, as well as a cleaning section located outside the die-cutting machine. This device reduces the machine setup time (make-ready) of the Bobst machine by up to 30-40%. Technical data and specifications: Compatibility: BOBST 106 E /ER (SP / Novacut / Visioncut / SPeria series) Working format: Max. sheet format 1060 x 760 mm. Basing system: Fully compatible with the Centerline II system (fast and precise tool centering) Construction: Stable, steel frame with an ergonomic work surface and shelves for accessories/frames Included equipment: Basing strips and millimeter scales Kdodpfx Ajzuwazeh Eot Clamping system Additional elements - additional frames (without the tools visible in the pictures, i.e., pins and telescopes) Technical condition: Condition: Excellent, 100% technically sound, locking mechanisms operate smoothly. Location of the device: Dąbrówka / Poznań, Poland Logistics and delivery Delivery terms: EXW (self-collection by the Buyer) / Possibility of arranging transport at the Buyer's expense. Availability: Immediate (the table is secured and ready for loading).

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, power: 8 kW (10.88 HP), input voltage: 400 V, input current: 18 A, input frequency: 60 Hz, type of input current: three-phase, cutting height (max.): 140 mm, cutting width (max.): 1,500 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 45 °, height adjustment type: electric, saw blade bore: 30 mm, actuation type: electric, rotational speed (max.): 3,000 rpm, rotational speed (min.): 5,000 rpm, total length: 7,250 mm, total width: 4,460 mm, total height: 1,770 mm, overall weight: 923 kg, table height: 900 mm, Equipment: documentation/manual, saw blade guard, scorer, • Electronically programmable circular panel saw for professional woodworking, combining the highest precision and user-friendliness. • Sliding table with aluminum roller table and hardened precision guides for consistently accurate cuts. • Flexibility: Manual, semi-automatic, and fully automatic operation possible. • Rip fence carriage with CompeX device, anodized aluminum profile with guide made of hardened, ground, and dovetailed steel guides. Kdedszvd T Djpfx Ah Est • Scoring unit with independent motorization, adjustable from the outside, and stops for easy saw blade positioning. • “SCM Thundercut” optimizer/sequencing control app for tablets. • Electronic 2-axis control: Vertical adjustment and tilting of the saw unit. • Eccentric clamping device. • Electronic display of the parallel fence position.

Condition: used, Log table with elevator and log scanner Rema Control - logs up to 6 m - between rails 1100/1050/ 1050/1250 mm - log table length: 10 m - Rema Scanner Ksdpeu Smq Ssfx Ah Eodt - log infeed conveyor

Condition: good (used), Rotary table Kdedpozy Rm Eofx Ah Ejt Storage location: 3135 Diameter: 380 mm Graduation on the table: 360° rotatable Height: 110 mm Center hole: 40 mm Number of clamping slots: 7 Condition: very good Weight: 50 kg Dimensions: 500 x 380 x 140 mm

Condition: used, well-maintained universal milling table for DECKEL milling machine. Kdsdpfxez A Hlye Ah Est

Condition: like new (used), Year of construction: 2026, operating hours: 22 h, overall weight: 1,500 kg, We offer a demonstration table-type shot blasting machine – high-quality Czech production, using quality materials in its manufacture. Type – TSM1. Number of operating hours – 22. - Turntable diameter – 1000 mm - Maximum height of the blasted part – 550 mm - Overall machine height – 2750 mm Kdsdpjztvclsfx Ah Eet - 1x blasting turbine – power consumption – 5.5 kW, turbine with a frequency converter for regulating the turbine rotation speed. The turbine has both left and right rotation directions, as needed. - Abrasive conveying system – power consumption – 0.75 kW. - Table rotation – power consumption – 0.75 kW - Total machine power consumption – 7 kW. The cabinet is lined with manganese steel. We also manufacture table-type shot blasting machines with a table diameter of 1500 mm. A significant advantage of the machine is the ability to change the turbine rotation direction to either right or left. Shot blasting equipment with CE certification. Another advantage of the equipment is its high efficiency during shot blasting, quiet operation, low energy consumption, and the requirement for a small space for installation. In its category, this table-type shot blasting machine can be considered very well-designed. (Sandblaster, sandblasting, shot blasting, sandblasting equipment, shot blasting equipment, shot blasting machine). Blast machine.

Condition: good (used), Altendorf WA8 sliding table saw Main motor: 5.5 kW, 3 cutting speeds Scoring saw: 0.75 kW, Kdodoznw Dyepfx Ah Eot Table length: 320 cm, Tilt: 0-45 degrees, electrically adjustable Blade height adjustment: electrically adjustable Max. blade diameter: 400 mm, Cutting width on the right side: 1370 mm. Good condition, fully functional.