Used Bundle for sale (391)

Condition: excellent (used), Year of construction: 1995, FULLY AUTOMATIC INLINE MACHINE FOR FOLDING BOXES BOBST MIDLINE 924 Speed: up to 18000 boxes per hour Nominal machine width: 2400 mm Nominal plate cylinder circumference: 1000 mm Largest printing area: 920 x 2400 mm Maximum corrugated board thickness: 10 mm Standard slitting blade thickness: 6.35 mm Average connected load: 200 kVA The line consists of: 1) Feeder Serco 2) Main machine – Flexographic printing machine midline 924 Colors: 3 // Automatic washing device Cgodpfx Ajxrfrajbbon 3) Slotter (Riller) Longitudinal slots // Tool is installed in the machine. 4) Punching module (e.g. for punching handles) 5) Breakout vibrating station (Material – punching residues are disposed of using compressed air) 6) Glue station Robotech 7) Folding unit 8) Counting station & display The specified number of cartons will be bundled - up to here main unit - 9) Package binder / bundling machine CEMA Fully automatic strapping machine with weld seal and press for 5 mm plastic strapping, for binding corrugated cardboard bundles in the direction of travel of the flute 10) Palletizing system Martin Automatic layer formation. Roller tables receive the packages from the bundling machine. The packages are positioned using the ball bearing table according to their arrangement in the preselected position. If necessary, the package can be rotated 90° or 180° simultaneously with the lateral movement.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, year of last overhaul: 2022, A complete BSH production line is for sale. The plant consists of components from System TM (feeding section), Keilzinken Technik NKT, HIT automation (multi-level storage, transport, lamella feeding repair station, planing and Kallesoe, etc.). Planing machines from REX: pre-planer, lamella planer and finish planer. High-frequency press from Kallesoe. 2 silos. Cgjdpfx Aowgcchobben

Condition: used, Year of construction: 2020, Pre-feeder 1600 width /2000m Bottom printing Cjdpjv Ni I Rsfx Abbjgn Max sheet 1270x2032 mm Min sheet 400 x 600 mm Thickness max: 9mm Max height of bundle 250 mm Min height of bundle 20 mm Height pile: Standard 1900 mm with elevation of 300mm : 220 mm With elevation of 500mm : 2400 With elevation 700mm : 2600 Max weight pile : 1300kg

Condition: good (used), Year of construction: 2008, functionality: fully functional, For sale are several Mosca strapping machines which we used for bundling plastic sheets. - All machines are in perfect technical condition. - Maintenance and spare parts were always provided directly by Mosca service. - The strapping process can be operated manually via foot pedal or electronically by signal/impulse control. Available for sale: - RO-MP-4, Year: 2003, Machine No. 69998, Frame height 400mm - RO-MP-4, Year: 2007, Machine No. 86269, Frame height 400mm - RO-MP-5, Year: 2007, Machine No. 87391, Frame height 500mm Csdpfx Abjxd T Nqsbogn - RO-MP-5, Year: 2007, Machine No. 85653, Frame height 500mm - RO-MP-5, Year: 2008, Machine No. 92385, Frame height 500mm - RO-MP-5, Year: 2008, Machine No. 93496, Frame height 500mm Shipping is done securely strapped on Euro pallets. (Some machines feature mounting holes, as shown in the sample image, used for fixing our counter-holders. These holes in no way affect the functionality.) Please send inquiries by email; I can then provide detailed photos of the respective models.

Condition: used, Year of construction: 2009, For sale: Band-All BA32-102 Banding Tool The Band-All BA32-102 is a high-quality, durable banding tool designed for heavy-duty applications. It efficiently secures bundles with precision, offering ease of use and long-lasting performance. Perfect for industrial and commercial use, this tool ensures a tight and secure band every time. In excellent condition and ready for immediate use. Contact for more details or to arrange a viewing! For sale: Band-All BA32-102 Banding Tool Cgodpfx Asv Sq Hyebbjn

Condition: ready for operation (used), Year of construction: 2010, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2010 Press force: 532 kN Voltage: 400 V Max. bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening size: 119.5 cm × 65 cm Condition: Very good! Inspected and fully functional. FLITS Rental & Sales service: with every machine, we supply one bundle of tying wire (120 wires). Need more bundles of tying wire? Request a non-binding quote. At FLITS Rental & Sales, you choose speed, clarity, and reliability. We think along with you, respond immediately, and ensure you quickly receive the right machine. You are warmly welcome to view the machines at our location. We are located at: Schoterlandseweg 94, 8413NE Oudehorne. Visits are possible by appointment, allowing us ample time to inform you properly and show you the most suitable machines. Codjyap I Aepfx Abbsgn We are happy to assist you! Waste baler | Paper baler | Cardboard baler | Plastic baler | Waste compactor | Recycling | Textile baler | Waste processing

Condition: used, Year of construction: 2016, functionality: fully functional, USED COMPLETE BOTTLING LINE KHS 54,000 BPH Product: Still Water Speed: 54,000 BPH Year: 2016 KHS INNOPET BLOWFILL MONOBLOCK Preform Hopper Preform Elevator Preform Orientator PET Blow Molding Machine: Chiller Labeling Machine 2 stations with roll-fed PE modules Direction of rotation: counterclockwise Electronic cam plates Filler Capper Type of workable cap: pre-threaded plastic Distribution system: pick & place Caps Elevator Caps Orientator Bottle Inspector KHS Shrink Wrapper Model: Innopack Kisters SP Version: film launch 6 Lanes Bundle 6x4 Csdpfsx Urmxox Abbegn Only film KHS Palletizer Dual Robotic Arm Clamping, lifting Pallet storage Interlayer system KHS Pallet Wrapper Rotating arm Pre-stretch Code: NP 696

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 22,500 h, control type: CNC control, degree of automation: automatic, controller manufacturer: Siemens, controller model: Sinumerik 840D, laser type: CO₂ laser, laser source manufacturer: Rofin, laser source model: DC 025, laser power: 2,500 W, pipe diameter (max.): 140 mm, pipe length (max.): 8,500 mm, table length: 8,500 mm, working length: 8,500 mm, travel distance X-axis: 8,500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 95 mm, workpiece weight (max.): 4,000 kg, type of input current: three-phase, compressed air connection: 6 bar, overall weight: 10,000 kg, total length: 17,536 mm, total width: 4,604 mm, total height: 2,237 mm, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, 2006 BLM Adige LT712D Tube Laser Machine Manufacturer: BLM Adige Machine Model: LT712D Laser: Rofin Sinar series DC K 2.5kW Laser source. Year: 2006 Infeed: 8,500mm Outfeed: 6,500mm Condition: Very Good Hours: 22,500hrs Available February or March 2026 This 2006 BLM Adige LT712D is a high-performance CNC tube laser cutting system designed for precision processing of mild steel, stainless steel, and aluminium tube profiles. Known for its reliability and accuracy, the LT712D is one of the most capable mid-range tube laser platforms, delivering clean, repeatable cuts with full automation from loading to unloading. With only 22,500 operating hours, this machine is in very good condition and has been maintained to OEM standards. It offers exceptional value for fabrication companies, structural steel specialists, subcontractors and manufacturers looking for a high-precision tube laser with proven durability. ⭐ Key Machine Specifications Working Capacity & Tube Dimensions Csdpfx Abjx Ddagsbjgn Minimum tube length: 3,200 mm Maximum tube length: 8,500 mm Round tube diameter: Ø12 – Ø140 mm Square tube: 12 – 120 mm side dimension Rectangular / flat-oval: up to 170 mm circumscribed circle, min. side 10 mm, max. side 140–150 mm Max bar weight: Linear: 15 kg/m Total (L=8500 loader): 130 kg Machine Dimensions & Weight System footprint (L=8500 version): 17,536 × 4,604 × 2,237 mm (complete system) 13,595 × 4,604 × 2,237 mm (machine body) Machine weight: approx.10000 daN (= 10 tonnes) Laser, CNC & Automation CNC Control: Siemens Sinumerik 840D Laser Source: Rofin DC-K Series Cutting Head: Autofocus head with capacitance sensor + collision protection Working Axes: X travel: 8,500 mm Y travel: 400 mm Z travel: 95 mm A-axis: spindle rotation A1-axis: steady rest rotation V-axis: Bar support on the machining line (90mm) W-axis: Unload piece support (85mm) X1-axis: steady rest travel (610 mm) Loader & Unloader Automatic bundle loader with alignment, measuring & singularisation system Scimitar-style tube transfer system for smooth transition to machining line CNC-controlled tube support system with 5 active support groups Intelligent cut-piece unloader with conveyor belt for short parts up to 300 mm Extraction & Cooling Systems Fume extraction: 2,000 m³/hr with high-efficiency filtration system Cooling: MTA TAE 121 chiller, 260-litre cooling circuit reserve Hydraulics: 25-litre tank, 25 L/min pump, 70 bar system pressure 🟢 Condition & Availability Year: 2006 Hours: 22,500 (very low for a tube laser) Condition: Very Good – well maintained, clean, fully operational Availability: February–March 2026 Includes: Full machine, loader, unloader, chiller, documentation supplied. Why the LT712D Is a Top Choice The BLM Adige LT series is widely regarded as the benchmark for tube laser systems. This LT712D stands out thanks to: ✔ Exceptional tube cutting accuracy ✔ Reliable automatic loading & unloading ✔ High-quality Rofin laser source ✔ Full CNC control of every movement ✔ Capability to handle a wide range of profiles ✔ Heavy-duty industrial build quality (10 tonnes of rigidity) For fabricators looking to increase productivity, quality, and automation, the LT712D is an ideal investment. Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, NET WEIGHING FILLING SYSTEM TYPE TOPLINE 1200 Reaching hourly capacities of 1200 bags (ONE THOUSAND TWO HUNDRED BAGS/HOUR), the TOPLINE has been designed to meet the requirements of high-speed filling of open mouth bags. In combination with our high-capacity NET WEIGHER, the TOPLINE 1200 is the perfect machine for fully automatic filling of granulated products. The bags are singled and opened by rotating grid singling system. After filling through flap-filling spout, the bags are transferred to the bag closing system by upper belt guiding. For clean and dust-reduced transport of the bags, the bags are kept shut until they reach the bag closing system. The machine was purchased directly from Behn + Bates in 2023 used for about months. The machines construction is 2015-17 but was UNUSED/NEW idle at another customer and returned to Behn + Bates. In the Year 2023, the nearly new machine was fully upgraded to current and latest technology at Behn + Bates factory in Germany then put in production in France. New machine costs EUR 400,000+ with 9-18 months lead time. This is a great opportunity to buy at discounted price and available immediately! Video in operation available upon request. Machine Technical Data: - Electric power 17 kW - Compressed air 160 ltr./bag plus 18 m³/h at 5 bar overpressure - Dedusting air 1.750 m³/h at 10 mbar under pressure - Weighing range 10 - 52 kg adjustable in 50 gm steps - Operation 1 person for the operation of the plant and for manual supply of the bags into the magazine - Output up to 1,200 bags/h Bag - Product Specifications: - Bag type flat open mouth bags AND gusseted open mouth bags - Flat Open Mouth Bag width 400 mm – 600 mm & Bag length 550 mm – 1000 mm - Gusseted Open Mouth Bags 380 mm – 600 mm (min. 320 mm between gussets) & Bag Length 550 mm – 1000 mm - Product examples crystal sugar, rice & grain, seed, dehydrated vegetables, animal feed & pet food, etc. Characteristics Cgjdsyah R Aepfx Abbjn
Diagnosis and functional test of the inputs and outputs
Touch panel with integrated troubleshooting
Electronic weighing system MEC
Dosing time regulator
Product contacting parts made of stainless steel
Central dedusting connections
Empty bag magazine with space for 5 bag bundles
Rotating grid singling system
Bag singling and opening by vacuum
Radial inlet flap with servo drive
Double bottom flaps
Three load cells
Flap-filling spout with internal deaeration
Liftable bag bottom vibrator
Full bag transfer by upper belt guiding Your benefits
High capacity
High weighing accuracy
Easy cleaning
Compact filling system
Easy palletizing due to perfectly shaped bag bottom
High filling degree and good product compaction due to bag vibrator
Intermittent bag transfer at the top of the bag = bags kept shut
Integrated electric control panel = quick assembly
Clean packaging area due to the encapsulated system
Lockable inspection doors on both the weigher and flap inlet
Easy product change

Condition: new, cutting diameter 410 mm saw band length 5800 x 41 x 1,3 mm table height 750 mm capacity 90 degrees: flat 700 x 410 mm capacity 45 degrees: round 410 mm capacity 45 degrees: flat 500 x 410 mm capacity 45 degrees: round links 410 mm capacity 45 degrees: flat links 430 x 410 mm capacity 30 degrees: round 320 capacity 30 degrees: flat 320 x 410 15 - 150 m/min workpiece weight max. 250 kg/m kg 5,5 kW 3200 kg 4500 x 2800 x 2000 mm - The ergonomic panel control can be networked and offers various options Option packages * Teleservice for remote maintenance * Setting sawing programs in the AV * Import of sawing programs from CAD with DSTV interface and data export - Automatic material feed: - In a compact design for shorter sections or with flexible insertion tongs Cedsx Sr Drspfx Abbegn Available in almost all lengths - Exact positioning of the material using servo positioning technology - Pioneering electric saw feed with ball screw: - highest cutting performance and quality, while being gentle on the saw band - Consistent use of the most modern recirculating ball bearing systems: - smooth-running, highly resilient, low-maintenance and play-free - Unique and patented double miter system: - Material is always clamped at right angles Furnishing: - Automatic cutting pressure and feed monitoring - Frequency-controlled AC drive 15-150 m/min, 5.5 kW - Hydraulic material full stroke clamping - Automatic movement of the vices - Saw frame height adjustment automatically - Minimum speed and saw band monitoring - Electric miter tilting via servo motor - Visualized program input with CNC control - Integrated MEBA pliers insertion system from 5-2300 mm per stroke with integrated roller conveyor *Special equipment: - Laser light for cutting line display/marking saws - Chip brush driven - Micro dosing system - Clamping pressure regulation - Material bundle tension - Job menu - Material database - Zero stop - Scraper belt conveyor for optimal chip disposal, 2000 mm long - Cutting progress control

Condition: new, functionality: fully functional, 2 speeds 35/75 m/min Saw blade speed 15-150 m/min Saw blade dimensions 4200x34x1.1 mm Cutting range at 90 degrees: round 325 mm Cutting range at 90 degrees: flat 500x300 mm Cutting range at 45 degrees right: round 300 mm Cutting range at 45 degrees right: flat 300x300 mm Cutting range at 30 degrees right: round 200 mm Cutting range at 30 degrees right: flat 200x200 mm Cutting range at 45 degrees left: round 300 mm Cutting range at 45 degrees left: flat 300x300 mm Minimum remnant length without bundle clamping – manual 85 mm Minimum remnant length with bundle clamping – manual 260 mm Smallest diameter 5 mm Working height 750 mm Total power requirement 3.0 kW Dimensions 1450x2200x1400 mm Cedpfxex Sq Tfe Abbsgn Equipment/Accessories: - Rapid mitre adjustment from 30° to 150° stepless, digital mitre display to 0.1° - Quick material clamping: Material is clamped parallel at 90° in every saw frame angle - MEBA high-performance package version “HSS” – Hydraulic lifting and lowering of the saw frame and hydraulic clamping of the material Stepless hydraulic cutting pressure and feed regulation Display of lowering speed via scale. Cut-through display via manometer. Rapid saw frame lowering via push button to material edge - Frequency-controlled AC drive 15–150 m/min – 3 kW - Full-stroke hydraulic material clamping - Machine base with chip collection tray - Saw blade drive with limit switch - Precision saw blade carbide roller guides, saw blade brush - Complete coolant system with electric immersion pump - 1 saw blade on the machine, 4-6 TPI

Year of construction: 2011, condition: used, functionality: fully functional, Finger jointing line for cross sections up to 200 cm² (80/240 mm or 100/200 mm), with the following. components: 1. HOWIAL tilt unstacking - SH/4t - 1,75x1,75x6,00m - 4t - short. Length 2,50 m, semi-automatic separation of the package. For tilting the wood pile up to 45°. Electric motor drive. stack dim. max. 1,75 x 1,75 x 6,00 m max. stacking load 4 t shortest wood length 2,5 m 2. HOWIAL - VE 1 lamella separator for crosscut saw. With pneum. controlled tongues, on which the material is marked for defects, deposited on the roller conveyor below. 3. HOWIAL - evaluation roller conveyor RO-1 digital wood moisture measuring, control and recording system for autom. recording and control of wood moisture in cycle measuring method according to electric resistance principle. 4. gann DMT-8 dig. Wood moisture measuring, control and recording system for automatic detection and control of wood moisture in the cycle measuring method according to the electrical resistance principle. Plant in large switchboard complete with ink jet printer. 5. HOWIAL - crosscut saw AS-30 B pneum. Under table crosscut, with 2 autom. feed units, autom. crosscut. Special photocell control for detection of fluorescent line markings. Automatic waste disposal possible. Saw motor power 7,5 kW saw blade diameter 700 mm feed drive approx. 2 x 1,5 kW Air pressure 8 bar feed speed max. approx. 60 m/min. 6. HOWIAL - conveyor belt cut off waste, with studded belt and guide plates belt width 350 mm belt 2000 mm long belt speed 0,4 m/sec. 7. HOWIAL - double roller conveyor RO-2 6,00 m long incl. transversal transport, drive by round belt, all rollers driven. Cross transport chain conveyor. Ejection ± moisture right Transport speed adjustable 100 m/min. length approx. 6,00 m Width of rollers approx. 400 mm Diameter 112 mm 8. compact finger jointing machine Cook Bolinder The technical data are original from Cook Bolinder: wood width from 75 to 245 mm Timber thickness from 20 to 105 mm Input lengths from 1m to 6 m Cross sections from 30 cm² to 200 cm² Pressing force 5 - 22 to Spindle diameter 50 mm tine profile 15/15 spindle speed approx. 6000 upm Total electrical connected load approx. 62 kW Machine weight approx. 9 to. Gluing OEST comb system for PU Modern Telemechanique SPS control. 9. HOWIAL - Roller conveyor with destacking system Driven roller conveyor with autom. ejector and hydr. driven destacking arms. Technical data: H: 920 mm L: approx. 12.000 mm 10. safety fences incl. circuit breaker 11. finger joint testing machine BSPLT-100 Testing machine for finger joint bending test according to DIN 1052-1/A1 and EN 385 Support distances freely adjustable, attached dimension scale, autom. calculation of support distances in the software. Fully automatic test procedure by mouse click on PC (not included). Alternatively, the test procedure can be started by key operation on the front panel. Connection of any commercially available PC or laptop (Win 2000/XP) via the supplied RS232 serial cable. Fully automatic measured value logging as well as automatic logging in MS-Excel with graphical display. Representation max. wood width: 300 mm max. wood thickness: 140 mm max. compression force: < 100 kN max. support length: 2100 mm Measuring accuracy Csdpji Ezx Djfx Abbegn WITHOUT DISMANTLING

Condition: used, Year of construction: 2009, functionality: fully functional, COMPLETE PET BOTTLING LINE KHS Product: Still Water Speed: 32,000 BPH Year: 2009 Cap: Corvaglia 29/26 Preform Hopper Preform Elevator Preform Orientator PET Blower KHS Model: Blowmax 16S Series IV Compressor Chiller Filling Monoblock: Filler 50 mechanical valves Type of filling: gravity Capper including elevator and orientator Cedpfx Absx Tpygebjgn Type of cap: pre-threaded plastic Cap size: Corvaglia 29/26 Distribution system: pick & place Labeller PE 1 roll-fed station Mechanical cam plates Bottle inspector Shrink Wrapper Version: film launch Bundle 6x4 Palletizer Alvey 881 Type: push system Pallet Storage Pallet Wrapper Lantech Model: S1500 Type of wrapping: Rotating arm Pre-stretch Code: NP 695

Condition: excellent (used), Year of construction: 1995, loading capacity: max. 40 Kg. disc outside diam. 650 mm bundle outer diam. max. 600 mm bundle innert diam. 170 - 310 mm bundle width: max. 200 mm Cgjdpfoi T Ir Aex Abbon

Condition: used, Year of construction: 2014, Manufacturer : Smipack Cgjdpjx R At Isfx Abbjn Model: BP800AR 280ST Year : 2014 Type : Automatic monobloc shrinkwrapper   Power : 17,2 KW Output capacity : 17 units / min Pneumatic stacker for rigid products Variable speed 90° infeed conveyor Multilingual menu   Width of infeed conveyor belt: 280 mm Product infeed height : 165 mm Maximum bundle height: 380 mm Sealing bar: 760 mm  

Condition: used, Vacuum lifting and transport system. Handling equipment for easy transport of boxes, crates, bags, packs, bundles, … without effort. Gripping tool with 4 suction cups. Maximum weight: 35 kg Vacuum pump with insulating box. Cjdpfxox R Alqj Abbsgn Jib crane Liftop brand. Height : 300 cm Maximum lift diameter: 400 cm

Condition: used, Year of construction: 1997, Continuous Heat shrink tunnel of BFB Packaging S. R. L. model M32N. Adjustable manual damper Codpfox Rz S Nox Abbogn Internal circulation fan Exit cooling fan 380 V / 50 Hz Control panel with digital temperature regulation, emergency stop, painted steel construction and mounted on four adjustable feet. Material used to apply heat shrinkable film to bundles, packages, packs.

Condition: new, cutting diameter 350 mm saw band length 4640 x 34 x 1,1 mm table height -- mm 350 mm 15 - 100 m/min 4,0 kW 2800 kg 2200 x 3200 x 2200 mm Fully automatic band saws with two-column guide for series cuts in particular materials that are difficult to machine and solid material. With this machine, MEP offers you a machine that is technically on the highest level and by using the highest quality materials one is not has an unbeatable, robust and torsion-resistant structure. An extreme Robust saw bow made of gray cast iron ensures the necessary stability impressive cutting results and the strong cast iron columns which the saw arch slides by means of pre-stressed linear guides take care of themselves at maximum load for the highest cutting precision. The modern Machine control (MEP NC 5.0) offers the user maximum ease of use and ensures trouble-free operation. (Check/evaluation/correction in real time) HIGHEST PERFORMANCE > The 2 operating modes (semi-automatic and automatic) make this possible efficient cutting in all conditions. Cjdpfelf Tu Uox Abbsgn > The control allows up to 100 cutting programs with each different quantities and lengths and minimizes the Programming time for frequently executed jobs. > The automatically detected start position of the saw head reduces the setting time. > The feed of the saw head via driven hydraulic cylinders Linear guides with preloaded recirculating ball bearings ensures the Reduction of mechanical vibrations during cutting and higher Stability. > The automatic alignment of the front saw blade guide head depends on the dimensions of the bars to be cut reduces the processing time. > The saw blade is tensioned by the brushless motor and is constantly controlled and automatically adjusted to the set minimum value. EXTREMELY FLEXIBLE > The feed system with 600 mm stroke is repeatable and cuts all lengths. > The vertical pair of rollers allows any type of bar or bundle that to be fed, to hold and to align. > The vector converter for stepless adjustment of the blade speed from 15 to 100 m/min allows cutting of any material. > The motorized chip conveyor can be positioned to the right or left of the cutting area to be assembled. CHARACTERISTICS: Fully automatic control - NC 5.0 -Innovative (Windows CE based) touch screen control with additional software Touch buttons for common operating functions -USB port -Joystick for manual control of the axes (X-Y) -Controlled head descent with automatic compensation via an in cylinder mounted servo valve, constant monitoring of the preselected torque 4 and with precise feed adjustment in millimeters/minute 5 -Setting / pre-selection of the stepless belt speed in m/min. -Saw band tension with band tension control and indication on the display by means electronic converter -Automatic detection of the beginning of the cut -Large 7" color touch screen to display and select all Machine functions and parameters and programming in a matter of seconds. Advertisement detailed alarm and error messages -Numerous special functions including different lengths + quantities (10 Run programs) as a sequence, clean cut, step execution and much more. -Stable, torsion-resistant and low-vibration cast steel saw frame -Carbide band guides for maximum cutting precision, hinged for easy saw blade change -Largely dimensioned deflection pulleys, adjustable, made of cast steel integrated belt circulation contro...

Condition: new, Year of construction: 2025, x-travel 580 mm y-travel 200 mm z-travel 340 mm speeds 115 - 1750 U/min table surface area 1000 x 240 mm tool taper ISO 40 total power requirement 4,5 kW weight of the machine ca. 820 kg dimensions of the machine ca. 1290 x 1090 x 2170 mm Universal precision drilling and milling machine for horizontal and vertical milling work with digital 3-axis position display DPA 31 Plus Description: - Heavy, solid design made of high-quality, vibration-absorbing gray cast iron Cedpfx Abstv Riaebegn - Oil bath gear with ground, hardened gear wheels - Coolant system - Halogen machine lamp with bundled beam - Solid and large cross table, precisely surface-machined with T-slots and adjustable wedge strips - Milling head can be tilted ± 45° - Right/left rotation - X-axis moves either with the handwheel or via the table feed device - Automatic limit switch on the X-axis - Height-adjustable protective screen with microswitch, against flying chips and parts, for the greatest possible protection of the user Scope of delivery: - Gear rim drill chuck 1 - 16 mm / B 18 - Arbor drill chuck ISO40 / B18 - Horizontal milling spindle with counter bearing, disc milling cutter holder Ø22 mm, Ø27 mm - Adapter ISO 40/MK3 - Adapter ISO 40/MK2 - Vertical and horizontal drawbar - T-slot nuts - Drifter - Operating tool

Condition: new, cutting diameter 230 mm capacity 90 degrees: flat 230 x 230 mm capacity 90 degrees: square 230 x 230 mm vice 235 mm turning speed range: 15 - 100 m/min dimensions of saw-band 2950 x 27 x 0.9 mm Control MEP CNC total power requirement 3.18 kW weight of the machine ca. 1175 kg dimensions of the machine ca. 1980 x 1105 mm * Automatic two-column band saw with a footprint of only 2.5 square meters * * Highest performance in the smallest space * Features : - powerful CNC automatic band saw in two-column design * for cuts at 0° - with Windows-CE based touch screen control * 5.0 - 180° tiltable control panel * Up to 100 cutting programs, each with different quantities and lengths * Minimizes programming time for frequently executed jobs - 2x operating modes (semi-automatic and automatic) * enable efficient cutting under all conditions - Saw head feed via linear guides driven by hydraulic cylinders . with preloaded recirculating ball bearings * Reduction of mechanical vibrations during cutting - Automatic alignment of the front saw blade guide head Csdpfx Aexabq Ujbbsgn * Reduces processing time - feed system with 600 mm stroke is repeatable and cuts all lengths - vertical pair of rollers can cut any type of bar or bundle material - infinitely variable blade speed adjustment from 15 to 100 m/min - robust cast iron structure (G25) to compensate for vibrations - Safety housing in accordance with the latest safety regulations . the Machinery Directive EN 13898/2007

Condition: used, Stacking tongs, box lifter, bundle clamp, gripper -Manufacturer: Müller Martini, pneumatic stacking tongs type 0277.0401 -Load load: max. 250 kg Cedpfx Aberz Szlobjgn -Clamping range: 850 to 1350 mm -Quantity: 2x grippers available -Price per piece -Transport dimensions: 940/250/H530 mm -Town weight: 87 kg/pc.

Condition: like new (used), For sale is a lot of high-quality aluminum industrial profiles with large cross-sections. The profiles are as new & unused, making them ideal for applications in mechanical and plant engineering, fixture construction, frame building, or hall construction. Technical data: Quantity: 30 pieces of 5.27 m each + 1 piece of 4.04 m Cross-section: 130 mm x 50 mm Total length: 161.14 m Material: aluminum extruded profiles Total weight: approx. 725 kg Profile type: T-slot profile / construction profile / industrial profile (solid, multi-chamber) Features: Highly stable and torsion-resistant Lightweight and easy to process Corrosion-resistant Ideal for load-bearing structures Condition: As new / unused Minor storage marks possible Logistics: Goods bundled on pallets Collection by arrangement possible Cgodpexbyx Hofx Abbsn Shipping available on request for an additional charge

Condition: new, Year of construction: 2026, functionality: fully functional, Edge banding machine – NB860EC - Machine with 6 edge band magazines and servo feed • Robust machine structure and most of the machine's mechanical parts are machined with advanced CNC machines for greater stability and longer life without deformation; • Combines multiple functions in one machine, including pre-milling, pre-heating, pre-melting, end trimming, servo fine cutting, servo scraping, surface scraping and polishing, spraying, all in one process. • Intelligent PC control, feed guide, belt pressing rollers, fine cutting and scraping are controlled by a servo motor. Corner rounding is adjusted pneumatically. Machine speed 16/20/24 m/min; • Nesting kit design • Fine refilling and corner rounding via HSK25 TECHNICAL DATA Panel length: ≥120 mm; ≥200 mm with rounded corners Panel width: ≥60 mm Min. Panel size: 120× 120mm; 120× 60mm long edge; 200*80 mm short edge Panel thickness: 9-60 mm Thickness C=edge: 0.4-3 mm Feed speed: 16/20/24 m/min Power supply: 380 V; 50 Hz Required air pressure: 0.7 MPa Distance between panels ≥50 Console 2 Dust collection outlet Φ 125 mm*5 Total power: 28 Kw Approximate weight: 3,000 kg Overall dimensions: 5,930*1,050*1,850 mm 6-sided drilling CNC and double workstation ND712DTL The ND712D is designed to have 2 independent workstations of 1200+650 mm, integrating 2 machines into one, thus doubling efficiency with less space required. The integrated, high-rigidity machine body structure gives the entire machine a longer service life and fast, stable machining. The optimized drill layout makes drilling more efficient. TECHNICAL DATA Total power: 52.36 kW Machine size: 7400 * 4,620 * 2,650 mm Power supply: 380V/50Hz 3 phases Air supply: 0.6-0.7MPa Total weight: 7,850 kg Control system: SYNTEC Panel size: Length: 250-2,800 mm / Width: 250-650/1200 mm / Thickness 10-60 mm Maximum travel speed: ( X) Axis /U ) - 135 m/min Y axis - 75 m/min Z axis - 30 m/min Transmission mode X axis - Rack and pinion Y axis - Rack and pinion Z axis - Ball screw Drilling blocks: Top 2+2; Bottom 1+1 Vertical drills (top): 19*4 Horizontal drills (top): X: 3 × 8 + Y: 2 × 8 Vertical drills (bottom): 9 × 2 Maximum drilling diameter: Φ35mm Distance between holes: 32 mm Cedpfx Asx Uplxjbbogn Rotation speed: 5000 rpm Shank diameter: Φ10mm Main shaft: 4* ER25 Power: 2*3.5kw; 2*5.5kw max. 18000rpm

Year of construction: 2001, condition: used, functionality: fully functional, machine/vehicle number: 11090, We are offering this used CemeCon CC 800/9 SINOX magnetron sputtering PVD coating system, year of manufacture 2001. Manufacturer: CemeCon Type: CC 800/9 SINOX Serial number: 11090 Year of manufacture: 2001, last upgrade in 2023 Power requirement: 140 kW Evaporators: 4 Voltage: 3×400V/N/PE Frequency: 50/60 Hz Codpfx Abex Tup Hsbjgn CemeCon CC800/9 SINOX features: - 4 cathodes - All cathodes DC or MF-pulsed - Anodes - 5 gas lines, 1 flammable gas - BIAS: DC or MF-pulsed - Heating system - 2 turbopumps - 6-position substrate carrier - Multiple targets - Extensive accessories including loading hardware, spare parts, and consumables - In 07/2023, the system controls were upgraded to the latest standard and the unit underwent manufacturer service. A bundle deal including a chiller, precision substrate cleaning unit, and lapping/polishing machine can also be offered. If you have any questions or require further information, please feel free to send us a message or give us a call.

Year of construction: 2012, condition: ready for operation (used), An FMB bar feeder including a bundle loader is available. Bar diameter range: 8mm-80mm, max. bar length: 3200mm, feed speed: 1000mm/s, return speed: 1400mm/s, max. remnant length: 580mm. Machine dimensions X/Y: approx. 4700mm/1500mm, weight: approx. 1300kg. Documentation available. On-site inspection is possible. Csdpfxjx Tumlo Abbegn