Used Buffing for sale (235)

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, workpiece height (max.): 80 mm, edge thickness (max.): 15 mm, height adjustment type: electric, overall weight: 7,000 kg, year of last overhaul: 2023, compressed air connection: 6 bar, power of the milling unit: 3,000 W, space requirement length: 10,500 mm, Fully refurbished Topedge Duo-melt, year 2014 2 x 3Kw each Pre-milling motors 80 mm panel thickness 1 x Synchroflex top driven belt system 2 x Glue heads and tanks, Duo Melt system (For instant glue colour changes) 1 x rough trim station Ihjdpfox Nbprox Ahvsw 1 x Bevel fine trim (can also be used for fine finishing wood in “flat” setting - adjustable angle 1 x Radius trimming machine 1 x AKF station 1 x 4 position per side AZK4 radius scraper 1 x Flat scraper 1 x Cleaning spray, front, middle and back - LCM 1 x Buffing station 2 x free spaces Infeed fence alignment for narrow panels Nesting package LCM iRelease cleaning system BrushTec ES - not included

Condition: good (used), Year of construction: 1988, functionality: fully functional, PLC control Workpiece thickness max 60 mm Edging thickness for roll material 0.4 - 3 mm Edging thickness for strip material 0.6 - 20 mm Edging thickness for strip material (without flush trimming) 30 mm Minimum workpiece width 60 mm Minimum workpiece length 140 mm 1901 Automatic edge feed for strip/roll material 1907 Glue application for panel thickness up to 60 mm, "Ultra-Granu-Press" granulate heating time approx. 3 - 4 minutes Iedpfxjyntq Dj Ahvehw 1911 Pressure unit up to 30 mm edging thickness 1916 End trimming unit 2 x 1.1 kW up to 30 mm edging thickness 1920 Flush trimming unit 2 x 1.1 kW up to 20 mm edging thickness 1966 Profile trimming unit, flush/chamfer/radius up to R = 3 mm 1927 Scraper unit, pneumatically controlled 1944 Buffing unit 2 x 0.15 kW, automatically actuated Feed rate 8/16 m/min Length 5720 mm

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) mm 0.8 / 20 Panels thickness (min/max) mm 8 / 60 Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt Safety and sound-proof enclosures/cabins Ihodpfx Aheyk Tkvsvjw OPTIONAL: Panels in-feed system 63.152 (mm 500 x 500) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 08.379 (2 x Kw 4,0) adjustable by N.C. Glueing Unit (EVA Glue) 283.1513 Band Pressure zone + Edge coils supporting unit (No. 1+2 reels) Snipping (end-cutting) unit 08.42/30/B (Kw 0,66 x 2) speed 30 m/min (0°-25°) Fine Trimming unit 08.055 (Kw 1,85 x 2) 0°-25° Multi Function Unit (Profile contour Trimming unit) SKF-L (2 x Kw 0,18) + (2 x Kw 0,4) Profile edge scraping unit 08.519 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-2 (Kw 0,18 x 2)

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4650x2230x2135 mm Weight 5800 kg Ihodpfx Ahjvz Epujvjw Total power requirement 19,8 kw

Condition: used, Year of construction: 2025, New display machine! List price €60,140 net Edgebanding machine #F5/00/11 with PLC control (including touchscreen) and hot-melt adhesive application to the workpiece for edge material up to 3 mm: - Jointing cutter (incl. DIA tool) up to 2 mm cutting depth - Maintenance-free glue pot with quick-change setup, incl. glue discharge device - HF end trimming saw station (approx. 12,000 rpm) - HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable insert cutter (combination type) - Corner rounding cutter - Radius scraper blade - Surface scraper blade (incl. pneumatic lift) - Buffing station - Robust chain feed - Ball-bearing mounted double roller top pressure - Viewing window on the rear of the machine - Extendable workpiece support - Feed rate approx. 10 m/min Ijdpoym Dvbofx Ahvehw Optional extras: - F5/08/4 Quick-change device for corner cutter - F5/08/5 Additional interchangeable motor for corner cutter with tool assembly - F5/09/4 Multi-radius scraper blade (R2/R1) - F5/10 Undercarriage - F5/14 Additional interchangeable glue pot - F5/24/1 Spray unit for separating agent - F5/24/2 Spray unit for cleaning agent - F5/30 Pneumatic 3-point adjustment (radius, chamfer, flush milling) - F5/31 Jointing up to 50 mm workpiece thickness (2) - F5/32 LED interior lighting 1) Max. jointing thickness 1 mm with special materials such as multiplex 2) Max. jointing thickness 1 mm for 40–50 mm workpiece thickness Location: Rieth

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: CE marking, DEMO MACHINE EX WAREHOUSE DENMARK NB7CJ – Single-Sided Edge Banding Machine Selected Standard Equipment and Features: • Panel length: min. 120 mm • Panel width: min. 80 mm (200 mm for corner rounding) • Panel thickness: 10 – 60 mm • Edge tape thickness: 0.4 – 3 mm • Edge tape width: 15 – 65 mm • Track speed: 16 / 20 / 24 m/min • Installed power: 27.5 kW • Machine weight: 2460 kg • Machine dimensions: 7700 × 1450 × 1650 mm • Quick-release glue pot for fast change and easy cleaning Iodpfx Ahsymn D Nevehw • Full edge banding cycle: pre-milling, pre-heating, trimming, corner rounding, scraping and buffing • Touchscreen control with intuitive interface • Compact design with nesting kit – suitable for pre-drilled panels • Dust extraction: 4 × Ø125 mm outlets • Optional return system for increased efficiency • Stable steel construction with long service life • CE certified and 3 years warranty

Condition: used, Year of construction: 2008, IDM Level HD is an industrial single-sided edgebanding center designed for edge processing in standard furniture manufacturing. Ihedpfx Aexztmdshvow The HD model features a more robust construction, making it suitable wherever consistent edge quality is required at higher feed speeds. This machine enables complete workpiece processing in a single pass—from pre-milling and adhesive application to the final edge refinement. Owing to its modular arrangement of working units, the machine can process ABS/PVC edges as well as veneer. The machine is pre-owned, fully cleaned, inspected, and ready for installation. Technical specification: • Pre-milling unit: 2 counter-rotating motors to trim the leading edge before edgebanding • Gluing unit: EVA glue pot, electronic temperature control • Pressure zone: main pressure roller + additional pressure rollers • End trimming saws: 2 motors, clean trimming of edge ends • Top and bottom trimming units: profiling, precise trimming of ABS/PVC edge • Front corner rounding unit: radius machining of panel corners • Rear corner rounding unit: finishing of corners at workpiece outfeed • Radius scrapers: final smoothing of edge radius • Flat scrapers: finishing of edge surfaces • Buffing unit: 2 discs for final polishing of the edge • Complete extraction system: connection points for all working units • Pneumatic pressures and adjustments: secure workpiece hold and precise regulation • Manual fine adjustment: analog readout wheels and micrometric adjustments for precision set-up

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: CE marking, documentation/manual, DEMO MACHINE EX WAREHOUSE DENMARK: • Panel length (corner trim): 120 mm (200 mm) • Panel width: 80 mm • Min panel size: 120 mm × 80 mm Ijdpfx Aheymny Rjvohw • Min panel size (corner trim): 200 mm × 80 mm • Panel thickness: 9 mm – 60 mm • Edge tape: 0.4 mm – 3 mm • Edge tape width: 15 mm – 65 mm • Feeding speed: 18 / 22 / 26 m/min • Feeding speed with corner trim: 22 m/min • Dust outlet: 8 × 125 mm dia • Weight: 6110 kg • Dimensions: 11200 × 1450 × 1650 mm Process steps: 1. Pre-milling 2. Pre-heating 3. Pre-melt 1 4. Pre-melt 5. Dual rail end trimming 6. Pneumatic control fine trimming 1 7. Pneumatic control fine trimming 2 8. 4 motors corner trimming 9. Pneumatic control scraping 1 10. Pneumatic control scraping 2 11. Off-cut 12. Flat scraping 13. Oscillating buffing 1 14. Oscillating buffing 2

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Condition: currently still in production Features and technical specifications: Edgebanding max. 8-55 mm Incl. swiveling control panel HF jointing unit with 2 motors Incl. quick-heating, exchangeable, Teflon-coated glue pot Incl. electronic positioning of pressure rollers Incl. tilting double end-trim saw unit Incl. flush milling unit Incl. application-controlled chamfer, radius, and corner copying unit with nesting package Incl. radius scraper with nesting package Incl. surface scraper Incl. grooving unit Incl. buffing unit Isdow Nadgjpfx Ahvehw Incl. spraying unit Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2008, functionality: fully functional, Well-maintained and refurbished SCM OLIMPIC K203 edgebander available in our warehouse. The machine is in very good working condition and ready for immediate operation. Machine equipment: DIA pre-milling cutters Pair of end trimming units Pair of rough straight milling cutters Rounding unit (Rondomat) – 2 motors Radius scrapers Ijdpfx Asyl Tvzohvjhw Buffing brushes The machine is fully equipped and ready for production.

Condition: used, Holz Her Sprint 1329 Power Heavy-duty design – edge thickness 0.4 – 8 mm (15 mm with tool change) 21.5" PPC 332 touchscreen control fa.s.t. setting technology “Set-up on the fly” Motorized, CNC-controlled bridge height adjustment Fully automatic edge magazine for roll and strip material (MOT) Pre-milling unit for jointing before the gluing station GLU-JET glue application station – for cartridge, granulate & PU adhesive, thin film technology Maximum edge height: 60 mm Adjustable glue height / sensing nozzle Pressure unit 1913, motor-driven and pneumatic NC servo axis End trimming unit for roll and strip material up to 15 mm edge thickness With electro-pneumatic adjustment of the end saw angle from 0-10° MOT6 multi-function milling unit – 6 NC-controlled axes: Flush trimming 8 mm (15 mm) Radius milling Bevel milling 0–15° pneumatically MOT4 copying milling unit – 4 NC axes, corner copying, postforming corners: for machining the upper and lower longitudinal edge, and copying the front and rear vertical edges; working height 60 mm, includes shelf program MOT4 scraper unit Flat scraper unit – finish with pre- and post-sensing Ihsdpsyi Algjfx Ahvow Buffing unit for final cleaning and edge polishing with 2 textile discs, tiltable by 5° Spray units for entry and exit section as well as antistatic agent at the pressure unit Entry section: electronically controlled separating agent spraying system Pressure unit: electronically controlled antistatic spraying system Exit section: electronically controlled cleaning agent spraying system with detergent Air cushion table at feeding side / L = 1800 mm, W = 600 mm First delivery in 2022 Machine is WORKSHOP TESTED and in TOP CONDITION Available ex stock Lieboch

Condition: used, Year of construction: 2021, 0 0,4 - 3mm mm Workingpiece thickness from to 10-50 mm Total length , mm Feed speed 9 m/min. Weight ca. 1500 kg BI-MATIC edge banding machine type PRIMA 7.3 r.a. PLUS MAN Partnership Edition One-man operation, very little use, from business closure ----- - Technical manufacturer's description: Units: Jointing unit including AIGNER diamond jointing cutter heads, with DIA Konstantin interchangeable cutter system and controlled edge blow-off nozzle behind the 2nd jointing cutter head. Crosscut saw unit with extraction device including pneumatically swivelling saw blades, adjustable and programmable from the control panel. Radius milling unit Rounding unit (copying milling unit) with insertable base function and 2-position turret. The entire unit can be inserted and removed pneumatically. Radius scraper unit can be inserted and removed, including extraction device with chip collection box for scraper chips. Flat scraper unit with 4-way scraper blades. The entire unit can be inserted and removed. Flat scraper blade unit with 4-way scraper blade. The entire unit can be inserted and removed. Removed glue residue is extracted. Buffing unit with 2 fabric buffing discs arranged at an angle. Equipment: - High-gloss package: roller scanning for radius milling unit, radius scraper unit and flat scraper unit Ihodpoyif Tdofx Ahvsw - Large viewing, noise and protective cabin for all units and for the glue pot - Interior lighting - Control panel with 12" touchscreen and self-explanatory user guidance - USB port for data backup and data transfer - Network connection for online support - Controlled pneumatic cylinder for workpiece distance control - Teflon-coated glue pot with quick-change system and energy-saving mode in standby - Glue roller with screw conveyor for long and tall workpieces (especially for PUR adhesive) - Pressure zone with motor-driven 1st pressure roller - Heavy roller cap shear for edges 54 x 3 mm - Feed guide adjustable via hand wheel (joint thickness adjustment) with numerical display - Upper roller pressure bar with numerical workpiece thickness display and hand wheel adjustment - Pressure zone with numerical display and handwheel adjustment - Manual 2-position turret for radius milling unit - Manual 2-position turret for rounding unit - Manual 2-position turret for radius scraper unit Technical data: Edge thickness: 0.4 - 3 mm Min. panel width (without rounding unit): 80 mm Min. panel width (with rounding unit): 130 mm Min. panel length (without rounding unit): 100 mm Min. panel length (with rounding unit): 300 mm Min. panel thickness: 10 mm Max. panel thickness: 50 mm Feed speed: 9 m/min Suction nozzle: 2 x 150 mm Connection: 9 kW - 400 V Compressed air: 6 bar ----- Price of the above machine on request! ----- (Technical data according to manufacturer - no guarantee!) All prices quoted are net. Plus statutory VAT.

Condition: used, Holz Her Auriga 1308 XL Compact design – Edge thickness 0.4 - 8 mm SPS screen control Edge-Control, PPC 319W, 18.5" touchscreen monitor iTronic adaptive pressure and glue quantity control with flushing routine Pre-milling unit for jointing before gluing Fully automatic edge magazine for coil and strip material Glue application station GLU JET cartridges + PU gluing, with tracing nozzle Workpiece height 8-60 mm High gloss package Pneumatic pressure unit Pneumatic end trimming unit for coil and strip material up to 8 mm edge thickness, with pneumatic swivel from 0-10° angle of the end trimming saws Multifunctional milling unit 1827 MOT4 for flush trimming up to 8 mm, radius milling and 15° chamfer milling via NC axes Corner rounding unit – rounding corners up to 3 mm edge thickness, working height 12–60 mm, postforming possible Scraper unit 1929 MOT4, for chamfers and radii with 2 scraper holders via NC axes Ijdpfsyh Ilyox Ahvjhw Surface scraper unit FK701 with pre- and post-sensing – finish Buffing unit – polishing Spraying device at infeed and outfeed Spraying unit with lubricant for high-gloss edges Complete DIA tool set included First delivery in 2021 Machine is in TOP CONDITION from business closure – small company Available from stock in Lieboch

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Condition: well-maintained, serviced regularly (last service by Homag in 11/2024) Features and technical specifications: Iodpfx Ahjwx Aaqevehw Minimum workpiece thickness: 12 mm Maximum workpiece thickness: 60 mm Minimum workpiece size (L×W): 240 × 55 mm (with 22 mm thickness) / 100 mm (with 60 mm thickness) Minimum edge thickness: 0.3 mm (roll material) / 0.4 mm (strip material) Maximum edge thickness: 3 mm (roll material) / 20 mm (strip material) Feed speed: infinitely variable, 18–25 m/min (frequency-controlled) Type of glue: EVA hot-melt adhesive Glue application (pot / cartridge / nozzle): melting unit with granulate hopper Glue volume / cartridge size: granulate hopper, melting capacity 18–35 kg/h, level-controlled Heat-up time: approx. 8–10 min Edge magazine (slots): 2 rolls (automatic roll change) Automatic edge change: yes (automatic via PC22, can be switched manually) Pre-milling: 2 × 1.5 kW, 200 Hz, 12,000 rpm, pneumatically adjustable Pressure zone: 1 pre-press roller Ø 150 mm + 6 post-press rollers Ø 70 mm, automatic adjustment End trimming: HL84 trimming unit, 2 × 0.8 kW, pneumatically adjustable (bevel / straight) Flush milling: via pre-milling unit, pneumatically adjustable Radius milling: FK13 contour routing unit, automatic 8-position tool changer (R = 2 mm) Bevel/profile milling: yes, via FK13, pneumatically adjustable Scraper: integrated in multi-finishing unit MN21 Polishing: buffing unit in finishing module FA11 Jointing unit: jointing milling unit KAL310/A20/S2, 2 × 3 kW Workpiece pre-heating: available Release agent spraying device: top / bottom, type 2929 (F.01) Extraction ports: multiple Ø 100 mm (individual extraction per unit) Control: power control PC22 (industrial PC, woodCommander on Win XP embedded) Operating voltage: 400 V, 50 / 60 Hz CE / Standards: CE-compliant according to EU Directive 98/37/EC Dimensions / required space: approx. 8,000 × 1,400 × 1,600 mm Weight: approx. 3,000 kg The return conveyor system visible in the pictures is not included in the scope of supply! Availability: short-term Location: 63934 Röllbach

Condition: new, Year of construction: 2026, A universal belt grinding machine for rough grinding and metal buffing. Suitable for various shapes and materials. The machine is by default equipped with a suction connector for extraction. 75×2000 mm grinding belt, powerful 3 kW motor. SM 75 model is additionally equipped with 2 belt speeds: 14,5 and 29 m/s. 2 rubberised wheels ensure good grip of the grinding belt. Machine features Universal area of application for edges, surfaces and round grinding Graphite coating on the surface for grinding surfaces increases the grinding belt's slippage Spring device ensures constant belt tension Easy and quick belt replacement Optimum grinding efficiency due to the high speed of the belt Can be quickly adjusted to horizontal or inclined grinding Universal area of application in iron working shops and industrial areas Large grinding surface with a protection guard Equipped with an additional precise adjustment of the belt inclination angle By default equipped with 2 belt speeds Technical data Ihjdpfjvu Uhasx Ahvow Wheel contact surface (H×W) 250×150 mm Grinding belt dimensions (L×W) 2000×75 mm Belt speed 14,5/29m/s Motor power 3 kW Weight 72 kg Dimensions (L×W×H) 1070 x 560 x 980 mm Warranty 12 months

Condition: new, Year of construction: 2026, A universal belt grinding machine for rough grinding and metal buffing. Suitable for various shapes and materials. The machine is by default equipped with a suction connector for extraction. 75×2000 mm grinding belt, powerful 3 kW motor. SM 75 model is additionally equipped with 2 belt speeds: 14,5 and 29 m/s. 2 rubberised wheels ensure good grip of the grinding belt. Machine features Universal area of application for edges, surfaces and round grinding Graphite coating on the surface for grinding surfaces increases the grinding belt's slippage Spring device ensures constant belt tension Easy and quick belt replacement Optimum grinding efficiency due to the high speed of the belt Can be quickly adjusted to horizontal or inclined grinding Universal area of application in iron working shops and industrial areas Large grinding surface with a protection guard Equipped with an additional precise adjustment of the belt inclination angle By default equipped with 2 belt speeds Technical data Wheel contact surface (H×W) 250×150 mm Grinding belt dimensions (L×W) 2000×75 mm Belt speed 14,5/29m/s Motor power 3 kW Weight 72 kg Dimensions (L×W×H) 1070 x 560 x 980 mm Isdpfsvu Uh Tjx Ahvehw Warranty 12 months

Condition: new, Year of construction: 2026, This lathe can be used for many tasks such as internal and external surfaces turning, tapers turning, buffing, modular and DP threading, drilling and internal broaching. This series lathes can be used for many tasks such as internal and external surfaces turning, tapers turning, buffing, modular and DP threading, drilling and internal broaching By default equipped with a 3 axes digital readout Modern and precise spindle bearings 80 mm large spindle bore Heavy bed made of cast iron, ground and inductively hardened Gear wheels strengthened through hardening and precise grinding Removable bridge allows for greater machining capabilities Protection guards compliant with the newest regulations Equipped with a foot mechanical brake Possibility of equipping the lathe with a ruler for turning tapers Technical data Swing over bed 460 mm Swing over cross slide 270 mm Swing over gap bridge 690 mm Turning length in gap bridge 165 mm Centres distance 1500 mm Bed inductively hardened Bed width 300 mm Spindle bore diameter 80 mm Spindle tip D1-8 Spindle mount MK7 Ijdpfxoriczio Ahvehw Spindle speed (12) 25–1700 rpm Maximum tool dimensions 25×25 mm Longitudinal feed range (42) 0.031–1.7 mm/turn Transverse feed range (42) 0.014 – 0.784 mm/turn Metric thread (41) 0.1–14 mm Inch thread (60) 2–112 T.P.I. Modular thread 0.1–7 M.P (34) D.P. thread 4–112 D.P. (50) Tailstock quill diameter 60 mm Tailstock quill extension 130 mm Tailstock quill tip MK4 Digital readout in 3 axes Main motor power 5.5 kW Flood coolant pump power 0.1 kW Dimensions 2750×1080×1370 mm Net weight 1820 kg

Condition: excellent (used), Year of construction: 2014, Polishing Machine for Furniture Fronts – Emme Elle Model 1350 For sale: Industrial polishing and buffing machine by Emme Elle, model 1350, ideal for furniture manufacturing plants, joineries, and spray shops. The machine is designed for the automatic processing and finishing of furniture fronts, lacquered panels, polyurethane coatings, and other surfaces, ensuring a smooth, even, and high-quality finish. — 📌 Key Product Features • Manufacturer: Emme Elle – a renowned brand in the Italian and European woodworking machinery sector. • Model: 1350 – working width up to 1350 mm, ideal for furniture fronts and large panels. • Condition: negotiable (used, in working order) – detailed information available upon request. • CE compliance: yes. — 🛠️ Technical Specifications • Working width: approx. 1350 mm – suitable for wide fronts and panels. Iodpeyk Dfwofx Ahvohw • Table dimensions: approx. 1350 × 3200 mm. • Polishing components: – 4 rotating shafts with Ø 350 mm cotton discs, – 4 polishing drums Ø 180 mm. • Wax distribution system: automatic module for the application of polish/wax compound. • Motors: multimotor configuration ensuring power and stable operation. • Suction/de-dusting system: efficient extraction unit for dust and debris, improving finish quality. — ✅ Applications The machine is dedicated to polishing and finishing furniture fronts, lacquered and veneered panels in production lines. Suitable for: • joinery and furniture manufacturing plants, • spray shops and finishing departments, • serial production as well as individual elements. It ensures uniform, high-quality surface finishes, reducing operator time and increasing production efficiency.

Condition: new, Year of construction: 2026, One of our best-selling conventional lathes, this lathe can be used for many tasks such as turning internal and external surfaces as well as tapers, polishing, modular and DP threading, drilling and internal broaching. Machine features Lathes from this series can be used for many tasks such as turning internal and external surfaces, tapers turning, buffing, modular and DP threading, drilling and internal broaching By default equipped with a 3 axes digital readout Modern and precise spindle bearings 52 mm large spindle bore Heavy bed made of cast iron, ground and inductively hardened Gear wheels strengthened through hardening and precise grinding Removable bridge allows for greater machining capabilities Protection guards compliant with the newest regulations Machining accuracy: circularity deviation below 0.01 mm, cylindricality deviation no more than 0.02 mm for 200 mm long measurement, perfect surface finish Equipped with a mechanical foot mechanical brake Possibility of equipping the lathe with a ruler for turning tapers Optional VARIO model with a smooth spindle speed adjustment and a digital indicator Technical data Swing over bed 410 mm Swing over cross slide 255 mm Swing over gap bridge 580 mm Turning length in gap bridge 190 mm Centres distance 1000 mm Centres height 205 mm Bed inductively hardened Bed width 250 mm Spindle bore diameter 52 mm Spindle tip D1-6 Spindle mount MK6 Spindle speed (16) 45–1800 rpm Maximum tool dimensions 20 mm×20 mm Longitudinal feed range (17) 0.05–1.7 mm/turn Transverse feed range (17) 0.025 – 0.85 mm/turn Metric thread (42) 0.2–14 mm Inch thread (45) 2–72 T.P.I. Modular thread 0.3–3.5 M.P (18) D.P. thread 8–44 D.P. (21) Tailstock quill diameter 50 mm Tailstock quill extension 120 mm Tailstock quill tip MK 4 Digital readout in 3 axes Main motor power (S1/S6) 2.2/3.3 kW Flood coolant pump power 0.1 kW Dimensions 1940×850×1320 mm Weight 1590 kg Default equipment 200 mm 3-jaw lathe chuck 250 mm 4-jaw lathe chuck 3 axes digital readout Ihsdoiz Tf Sepfx Ahvsw Face plate Steady rest Follow rest Spindle reducing sleeve Dead centre Change gears for the swing-frame of the gear train Cooling system Lighting installation Thread indicator (gauge) Lathe equipped with an electromechanical foot brake compliant with EC regulations Chips container Set of handling tools Protective guards compliant with the newest EC regulation User manual EC declaration of conformity Factory new machine under full warranty Factory new machine, under warranty For more information you can visit our web page.

Condition: used, Year of construction: 1985, edge thickness 0,4 - 12 mm work piece thickness 10 - 55 mm work piece length min 160 mm work piece width min 65 mm feed speed 13 m/ min compressed air 7 bar machine length 5420 mm weight 1950 kg glue pot with quick melt system glue application roller wit left and right turning edge magazine for PVC and strips motor height adjustment for pressure beam pneumatic pressure rollers for edge magazine control panel, rotatable all aggregates in-line controlled cutting milling combination with 2 aggregates, 1st aggregate straight, 2nd aggregate radius and phase milling tool draw blade buffing unit central lubrication for transport chain quick change system edge control system with error msg IR heater Ijdpoc Tmygefx Ahvshw CE Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: good (used), Year of construction: 1988, Work piece thickness 0,4 - 8 mm Work piece height max. 51 mm Min. work piece width 50 mm min work piece length 180 mm edge magazine for PVC and strips pneumatic pressure rollers for edge magazine edge snipping unit cutting unit with 2 saws milling aggregate buffing unit Feed speed 11 m/ min Ihjdpjbahd Ejfx Ahvow Glue application with fin nozzle Air pressure 6 bar length 3750 mm

Condition: excellent (used), Year of construction: 2007, Edge thickness 0.2 - 12 mm Workpiece thickness 8 - 52 mm Workpiece width min. 70 mm Workpiece length min. 150 mm Automatic edge magazine milling unit 2 x 1.5 kW, application-controlled Cut-off unit 2 x 0.3 kW Flush trimming unit 2 x 0.7 kW, scanning on one side Fine trimming unit 2 x 0.35 kW, tiltable 15/ 30/ 45 degrees Fine trimming unit 2 x 0.3 kW, R=2, scanning on both sides Corner copying unit 2 x 0.3 kW Scraper unit, autom. in/ out Flat scraper unit Buffing unit 2 x 0.2 kW, oscillating 5 x spray device (2 x release agent, 1 x lubricant, 2 x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Feed 10 - 14 m/min COMBI MELT gluing part for EVA/ PUR, volume 1.5 l CE mark Total connection 12.6 kW Iedslc Ewispfx Ahvjhw Dimensions L x W x H approx. = 6120 x 840 x 1500 mm Weight approx. 2,900 kg

Condition: good (used), Year of construction: 2005, functionality: fully functional, Single-sided edge banding machine with jointing cutters and coping unit, designed for processing EVA hot-melt adhesives Technical data: Edge thickness: 0.4 - 12 mm Workpiece thickness: 8 - 60 mm Coil separation: 3 x 45 mm or 0.8 x 65 mm Machine length: approx. 6,860 mm Top pressure manually height-adjustable Equipment: Manually adjustable infeed fence Jointing unit with 2 motors, 2.2 kW (each) both motors pneumatically controlled Hot-melt adhesive application Pressure zone with 1 primary pressure roller and 3 subsequent pressure rollers Isdpfx Aoygg Nkehvjhw End trimming unit with 2 motors, each 0.35 kW automatically adjustable via program from chamfered to straight trim cuts Edge trimming unit with 2 motors, each 0.55 kW, for flush trimming, chamfer trimming, or radius trimming with 4-position fixed-point adjustment for side tracing Grooving unit with horizontal shaft, e.g., for back panel grooves Copy milling unit with 2 motors, each 0.35 kW Pneumatic infeed and outfeed control Profile scraping unit with pneumatic infeed/outfeed control Flat scraper unit Buffing unit Additional equipment: * Release agent application at infeed Control system PC 16 with color graphic user interface Attached return system LIGMATECH BOOMERANG ZHR 11 Return system currently not operational, in need of repair

Condition: excellent (used), Year of construction: 1998, For sale is this beautiful Brandt edge banding machine. It can be inspected and tested on site. About the machine: Ihjdsykindepfx Ahvjw - End trimming unit - Edge preheating - Flush trimming saw unit - Profile milling unit top/bottom - Scraper top/bottom - Buffing unit

Condition: new, Year of construction: 2026, Compact machine with pre-milling unit. Technical data: • Feeding speed – 7 m/min. • Panel Thickness - 12-45 mm • Edge Thickness – 0,4 – 3 mm • Mini. Panel width – 90 mm • Mini panel length – 90 mm • Working table height - 856 mm • Extensible support width - 560 mm • Extraction connector Ø in mm - Ø4" • Total Motor Power - 6,0 kw-1PH ; 5,75 kw-3PH • Overall Size (LxWxH) – 3200 x 1200 x 1200 mm • Weight, kg (with standard equipment) – 500 kg / 632 kg (N.W./G.W.) • Packing size (LxWxH) – 2820 x 720 x 1320 mm • Pre-milling – 9000 rpm • Up/down – 10500 rpm • Front/rear – 8800 rpm • Buffing – 2800 rpm • Power (kW) of each motor : • Feeding motor – 0,75 kW • Glue spindle motor - 0,25 kW • Front/rear trimming motor - 0,18 kW Isdpfxsd H Elkj Ahvehw • Flush trimming motor - 0,55 kW • Upper buffing motor – 3 ph-0,12 kW; 1ph-0,18 kW • Lower buffing motor – 3 ph-0,12 kW; 1ph-0,18 kW • Pre-heating – 0,4 kW • Glue pot heating (5 elements) – 1,315 kW