Used Buffing for sale (233)

Condition: used, Year of construction: 1991, The machine has been in operation. The glue tank was overhauled approximately 2 years ago. The pressure rollers should be replaced. The units can be used well as spare parts. Used Manufacturer: Ott Type: Kantomat K 5 Year of manufacture: 1991 Machine no.: K 5200 Hnedjzkl H Uopfx Aitju Granule quick-heating tank Feed rate m/min: 12 / 18 Solid edges up to mm: Edge banding from roll up to mm: 3 Swiveling edge banding unit: Type K 14 Flush trimming Flush radius trimming Radius drawing blade controlled Edge buffing, oscillating Automatic edge magazine Large roll support Edge thickness mm: Workpiece height mm min / max: 10 - 60 Workpiece width mm min: 60 Workpiece length mm min: 160 Exhaust connection mm: 160 Space requirement approx. L x W x H mm: 5400x1100x1400 Weight approx. kg: 1800 Total connected load kW: Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without guarantee or warranty.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 1,174 h, product length (max.): 4,770 mm, This HOMAG KDF 230 edgebander was manufactured in 2014. It has processed a total of 65,428 workpieces and 108,908.92 meters of edge length. The machine features a digital touchscreen control panel and a multi-flexible overhead dust extraction system. If you are looking to get high-quality edgebanding capabilities, consider the HOMAG KDF 230 machine we have for sale. Contact us for further details. Hedpfozzwhfsx Aitonu - Total Operating Hours: 1174:30.12 h- Total Workpieces Processed: 65,428 Stck- Total Edge Length Processed: 108,908.92 m- Application Unit Temperature: 190 °C (Target), 76 °C (Actual)- Feed Speed: 11 m/min- Working Height: 950 mm- Pneumatic Connection: min. 6 bar- Overall Machine Length: 4,770 mm- Workpiece Width min.: 70 mm (at 8-22 mm thickness), 120 mm (at 23-40 mm thickness), 150 mm (at 41-60 mm thickness)- Workpiece Overhang: 38 mm- Workpiece Thickness: 8 - 60 mm- Edge Material Roll: 0.4 - 3 mm (max. cross section 135 mm² for PVC, 100 mm² for veneer, roll diameter max. 830 mm)- Edge Material Strip: 0.4 - 6 mm (max. cross section 165 mm²)- Control System: EasyTouch 2- Operating Voltage: 400 V / 3Ph / 50Hz- Joint Trimming Unit: 2 x 2.2 kW, 200 Hz with DIA cutter set (100 x 65 x 30 mm, Z=3, max. workpiece thickness 60 mm)- Gluing Unit: Standard A6 with workpiece pre-heater and quick-change application unit (suitable for Granulate / PU)- End Trimming Unit: 2 x 0.18 kW, 200 Hz, 12,000 rpm (swivel range 0-15 degrees) with pneumatic adjustment- Fine Trimming Unit: 2 x 0.27 kW, 200 Hz, 12,000 rpm with pneumatic adjustment (chamfer/radius/straight), DFC combination cutters, and multi-roller sensing - Corner Rounding / Form Trimming Unit: 1 x 0.35 kW, 200 Hz, 12,000 rpm (max. edge thickness 3 mm, max. workpiece thickness 60 mm, min. workpiece length 250 mm) with structural floor attachment- Profile Scraper Unit: Quick-change heads, pneumatic adjustment, and special multi-roller sensing- Glue Joint Scraper Unit: Included with top/bottom tracing and dust extraction- Buffing Unit: 2 motors x 0.09 kW, tilt and height adjustable- Pressure Line: Smooth PU top pressure rollers- Additional Features: Hood internal lighting, feed fence extension (+300 mm), automatic edge infeed (KDX 1210/1400) Technical Specification Feed Speed 11 m/min

Condition: used, Year of construction: 2014, For inquiries: Zoltán Utasi +36 30 205 7380 • motorized pressure bridge adjustment • Electrical system for stepless feed 400 V / 50 Hz, 2.2 kW • “Control PPC 221 – with 8.4'' VGA color display” High-performance control with very simple operation • Edging pre-milling unit 1802, 400 V (2 x 2.0 kW, 200 Hz, 12,000 rpm) with 2 milling units for pre-milling the panel edge • Cutter, diamond Ø 70 x 64 x 30 mm, Z2, left-hand rotation For pre-milling unit 1801 / 1802 • Cutter, diamond Ø 70 x 64 x 30 mm, Z2, right-hand rotation For pre-milling unit 1801 / 1802 • Edge feeding unit 1903 SYNCHRO automatic transport of rolls and strip material • Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) • Pressure unit 1913 pneumatic first roller driven, 2 additional pressure rollers with pneumatic individual control Hnodpfxex Huhco Aiteu • Cut-off unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12,000 rpm) pneumatically swivelable 0/10° • Multifunction milling unit 1827 pneumatic (2 x 0.65 kW, 200 Hz, 12,000 rpm) • Vertical tracing rollers manual manual adjustment of the vertical tracing roller by 0.1 mm for milling edge overhang, e.g. for plastic edges • Cutter, diamond Ø 56 / 60 mm, Z = 2, R = 2.0 mm, left-hand rotation Diamond-coated, solid tool with CM technology (LEUCO system) with integrated chip extraction, patented ProLock-E • Cutter, diamond Ø 56 / 60 mm, Z = 2, R = 2.0 mm, right-hand rotation Diamond-coated, solid tool with CM technology (LEUCO system) with integrated chip extraction, patented ProLock-E • Corner copying unit 1832 (1 x 0.35 kW, 200 Hz, 12,000 rpm), for edge thickness up to 3 mm • Cutter, diamond Ø 53 mm x 10 mm x 16 mm, Z = 3, R = 2 mm, with CM technology (LEUCO system) with integrated chip extraction, for profiling unit 1832 • Scraper unit 1929 pneumatic including pneumatic adjustment (separately for top and bottom) • HW reversible knives for scraper holder 1929 / 1927 R = 2.0 mm (2 pcs required) • Flat scraper unit 1964 Removing glue residue for a clean glue joint. • Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) For final cleaning and edge polishing. With 2 textile discs, swivel range 0–5°

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 22 (ca.) Panels thickness (min/max) mm 10 / 45 (60) Numerical Control Eye-M Feeding speed (adjustable) m/min 30 max (ca.) Top pressure system with rubber belt In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) RT/H (2 x kW 4 ca.) Dual-Mode Glueing Unit (Hot Melt Glue + Quick Melt system) VC600 + QMS-P Band Pressure zone (N.C. adjustment) Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) unit YU/SP (2 x kW 0,55 ca.) Rough Trimming unit R-E (2 x kW 1 ca.) Fine Trimming unit RSU/E (2 x kW 0,55 ca.) Multi-Profile? Hodpfx Aez Nyp Hjitjnu Corners Rounding (contour trimming) Unit C1 + C2 (4 x kW 0,35 ca.) with micro-adjustments? Profile edge scraping unit RCS (IN-OUT) Multi-Profile? Free space Glue scraping unit RCA (In-Out) Hot Air Heater (to reactivate the color of plastic tape) PH 1600 Buffing unit (2 x kW 0,3 ca.) OPTION: Automatic Return System (fastBack)

Condition: used, Year of construction: 2010, - Application of release agent, top/bottom - Joint milling unit - Gluing unit - Trimming unit - Copy milling unit SKF-L - Profile trimming blade unit - Spray cleaning agent - Self-adjusting trimming blade unit - Buffing unit Single-sided edge banding machine Manufacturer: IMA Type: Advantage 310 Year of construction: 2010 Technical data Workpiece - Workpiece length: min. 150 mm - Workpiece width: min. 65* / 150 mm *at a max. workpiece thickness of 25 mm - Workpiece thickness: min. 8 mm, 12 mm with profile trimming blades max. 40 mm (with MFA 08.346), 60 mm (with SKF) Hjdpfxezuyp Ej Aitsnu - Smallest workpiece: 65 x 300 / 150 x 150 x 19 mm - Machining allowance per workpiece edge: 0 - 5 mm (observe max. chip cross-section) - Workpiece shape: right-angled - Material: chipboard, MDF - Surface material: direct coating (melamine resin paper), paper, film, veneer Edge material - Roll material without film: Paper edges & plastic edges: 0.3 - 3.0 mm Veneer edges: 0.5 - 3.0 mm - max. edge cross-section: 150 - 180 mm² - Cut edge strips: Strips: 3.0 - 8.0 mm - max. strip cross-section: 520 mm² - Edge height: min. 12 mm, max. 65 mm - max. upper edge overhang: 2 mm - Edge profiles Paper edge: approx. 0.4 mm, chamfer 15 Plastic edge up to 3.0 mm, radius depending on the tool Strip up to 8 mm flush milling (with interchangeable motor on MFA) Machine - Constant workpiece projection from the chain track: 35 mm + edge thickness - max. trimming cross-section 520 mm² - Throughput width: min. 65 mm (with projection of 35 mm) - min. workpiece length in feed direction: 150 mm - Overall height (top edge of chain track): 940 mm - Unit side: on the left in feed direction - Pneumatic connection: approx. 7 - 8 bar Application of release agent, top/bottom Joint milling unit 08.379 and blowing nozzle - with 2 motors, each 4 kW, 9000 RPM, 150 Hz Gluing unit 283.1513 with oil bath gearbox - Adhesive output 0.8 l, 60 mm high, with quick-lock system - can be used for hot melt adhesive or PU adhesive - with single roll / strip magazine, roll diameter 800 mm - with 3 main pressure rollers and 3 counter pressure rollers Trimming unit 08.415 - pneumatically swiveling to 0 or 8 degrees - with 2 motors 660 kW, 400 V, 200 Hz, 12000 RPM - 2 HM trimming saw blades 160 x 3.5 x 22, Z=36 Copy milling unit SKF-L - with 2 motors 180 W, 400 V, 200 Hz, 12000 RPM - and 2 motors 400 W, 400 V, 200 Hz, 12000 RPM - 1 set of DP profile milling cutter I 80x12xHSK25-R, Z = 4, with HSK25 shank - Profile length in the feed direction: max. approx. 50 mm - Workpiece thickness: max. 60 mm - Working speed: max. approx. 20 m/min - Distance between 2 workpieces: min. approx. 400 mm - min. workpiece projection = 35 mm + profile depth Profile trimming blade unit 08.519 - For finishing a top and bottom milled quarter-circle profile Spray cleaning agent Self-adjusting trimming blade unit 08.521 - for removing hot melt adhesive residue from the edge area of the top and bottom of the workpiece Buffing unit 08.617-2 - with an upper and lower motor: 180 W, 50 Hz, 1400 RPM - 2 polishing pads 50 x 160 x 19 mm

Condition: used, Year of construction: 1988, machine/vehicle number: 387/8-84, functionality: fully functional, type of input current: three-phase, workpiece height (max.): 45 mm, edge thickness (max.): 51 mm, height adjustment type: mechanical, feed rate X-axis: 11 m/min, actuation type: electric, total height: 1,280 mm, total length: 3,750 mm, total width: 850 mm, overall weight: 756 kg, Equipment: CE marking, documentation/manual, Mode of operation: hot/cold process, one-sided left Edge band thickness: 0.4 - 8 mm Maximum edge band height: 51 mm Workpiece dimensions: width min. 50 mm, length min. 180 mm, thickness min. 6 mm Feed speed approx. 11 m/min Glue application via blade nozzle Hnjdpfx Aijy Dh D Estju End trimming Flush trimming – tiltable up to 15 degrees Radius trimming – tiltable up to 15 degrees Buffing unit Compressed air requirement: 6 bar

Condition: excellent (used), Year of construction: 2005, Edgebanding Machine Manufacturer: Brandt Model: KDF 540 Profiline Year of manufacture: 2005 Operating hours: approx. 7,718 h Edge thickness: 0.3-3 mm (roll), 8 mm (magazine) Workpiece thickness: 8 - 50 mm Total length: 5,360 mm Connected load: 7 kW Feed speed: 11 m/min Height adjustment: Electric Joint adjustment: Electric Equipment: Hodpfoyvr H Isx Aitjnu Jointing unit: Yes End trimming unit: Yes Radius flush milling unit: Yes Corner copying unit: Yes Radius scraper: Yes Surface scraper: Yes Buffing unit: Yes Spraying device: Yes

Condition: used, PCB handling equipment from E-Flex SMT microsystems: WHM-106SD3TM-Al (2022) price: €6,878 WHM-330SD0TXL-AIR(UXL)C (2023) price: €5,367 WHM-201SDNTM-I (2022) price: €3,832 WHM-201SDNTM-I (2022) price: €3,832 WHM-200SD3TM-I (2022) price: €3,338 WHM-201SDNTM-I (2022) price: €2,899 WHM-201SDNTXL-IA(SD2) (2023) price: €5,739 WHM-200SD3TM-IA (2022) price: €3,439 Hnedsx Tzn Aopfx Aitsu WHM-200SD3TM-l (2022) price: €3,738

Condition: used, This listing is for a Qiagen QX Buffer Tray. The unit is in full working condition and is ready for immediate release. The Qiagen QX Buffer Tray is an essential component of the QIAxcel DNA Kits, specifically engineered for streamlined automated DNA fragment analysis using the QIAxcel instrument. Key Features: Pre-Filled Buffers: The buffer tray comes pre-filled with all necessary buffers required for DNA fragment analysis, including the proprietary QX Buffer essential for optimal performance. Compatibility: Specifically designed to be compatible with the QIAxcel instruments, ensuring seamless integration and operation. Part of QIAxcel DNA Kits: It is a fundamental part of the QIAxcel DNA Kits, facilitating automated processes for reliable and consistent DNA analysis. Proprietary QX Buffer: The QX Buffer enhances the analytical capabilities of the QIAxcel System, improving resolution and accuracy in DNA fragment sizing. Usage Instructions: Loading: Begin by loading the gel cartridge along with the pre-filled buffer tray into the QIAxcel instrument. Filling: Hnedpfx Aoxxyitsitsu Follow the manufacturer’s instructions to ensure the buffer tray is filled and loaded properly, which is crucial for accurate results. Process Selection: Select the desired process profile on the instrument for the type of analysis you wish to conduct. Analysis Run: The QIAxcel instrument will automatically dispense the buffers from the tray and perform the DNA fragment analysis, streamlining the workflow.

Condition: ready for operation (used), Year of construction: 2008, Brandt Optimat KDF 420 Edge Banding Machine Hnodpfxox Dzw Nj Aiteu Powercontrol PC 20 control system Edging thickness: 0.4–8 mm Edging height: 8–60 mm Joint trimming with DIA cutter End trimming Flush and radius trimming Radius scraper blade Flat scraper blade Buffing unit Machine length: 4360 mm Operating manual and tools included Year of manufacture: 2008 Price: 15,000.-

Condition: used, Year of construction: 2011, Edge processing line HOMAG, consisting of: - Infeed system for longitudinal and transverse parts - One HOMAG edge banding machine with LASER GLUING - Transfer station for longitudinal and transverse output - Return conveyor for automatic circulation Pos. 1 Vacuum infeed system TBP 410 Max. workpiece size 2,800 x 1,200 x 40 mm Max. workpiece weight 50 kg Small parts down to min. 250 x 85 mm (longitudinal and transverse) Narrow parts 2,800 x 69 mm (longitudinal only) Servo-controlled lifting drive for max. 18 cycles/minute With servo-controlled rotary device -90/+180 degrees Pos. 2 Single-sided laser edge banding machine HOMAG KFL610/21/PU/L/25/SI14 For automatic 4-sided processing in 4 passes With SI 14 feeding system for automatic feeding of longitudinal and transverse parts Equipment: - Release agent application top and bottom - Trimming cutters 4.5 KW / Double-trimming cutter 2 x 6.6 KW - Stepless axis adjustment vertical and horizontal - Mortising unit 2 x 4 KW - LASERTAC activation unit 3 KW / optionally PU gluing - Max. edge thickness 3 mm - 24-position roller magazine with servo-controlled edge feeding - Release agent spray device top/bottom - Trimming unit bevel/straight HL 84 / 0.8 KW with 2 motors - Pre-milling unit with 2 motors, each 1.5 KW (pneumatically adjustable to 2 positions) - Release agent spray device top - Profile milling unit FK 23 with 2x8-position tool changer for 20 cycles/minute - Multi-scraper unit MN 21 automatic - Finishing unit FA 11 top/bottom (flat scraper and buffing unit) - Milling unit with 6.6 KW motor, pivotable 90 degrees, stepless axis adjustment vertical and horizontal. With HSK 63 F tool holder - Machine is designed for tool changes in the gap Hnjdpfozvmx Ajx Aitou Pos. 3 Workpiece return with chain lifting buffer To decouple processing machines by temporarily buffering. Return via approx. 6 belt conveyors Pos. 4 Vacuum transfer device TBP 410 Max. workpiece weight 50 kg Small parts down to min. 250 x 85 mm (longitudinal and transverse) Narrow parts 2,800 x 69 mm (longitudinal only) Servo-controlled lifting drive for max. 18 cycles/minute With servo-controlled rotary device -90/+180 degrees

Condition: ready for operation (used), A Baader Lino poultry buffer system is available. Hjdpfjt Nhmujx Aitonu

Condition: reconditioned (used), Year of construction: 2013, Used machine Year of manufacture: 2013 Equipment and technical data: - machine has been completely overhauled: - new Glue Jet 301 glue system (top part 1 mm) - all units inspected - all cutters sharpened - all knives replaced - feed speed: 10 - 18 m/min - workpiece length: min. 160 mm - workpiece width: min. 60 mm - workpiece thickness: 8 - 60 mm Hedpjzlbpzjfx Aitsnu - edge thickness: 0.4 - 8 mm - electrics for infinitely variable feed: 400 V / 50 Hz, 2.2 kW - motorised pressure beam adjustment - automatic chain lubrication - PPC 315 control with 15" touchscreen - ECO MODE energy-saving mode - infeed fence 1350 mm, motor-adjustable - jointing/trimming unit 1802: - 2 x 2.0 kW, 200 Hz, 12000 rpm with 2 milling units for jointing the panel edge - cutter, diamond Ø 70 x 64 x 30 mm, Z2, counter-clockwise for jointing unit - cutter, diamond Ø 70 x 64 x 30 mm, Z2, clockwise for jointing unit - edge feed 1901 fully automatic - adhesive application station Glu Jet GJ301 automatic: - 2.3 kW; 50 Hz - storage hopper for granulate - pressure unit 1913 MOT - end-trimming unit 1918 (60 mm) pneumatic - multifunction milling unit 1826 MOT4 (2 x 0.65 kW): - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm counter-clockwise - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm clockwise - profile milling unit 1833 MOT4: - cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, counter-clockwise with CM technology - cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, clockwise with CM technology - scraper unit 1929 MOT2: - carbide indexable inserts for scraper holder R = 2.5 mm (2 pcs. required) - flat scraper 1964 - buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Availability: at short notice Location: 63934 Röllbach

Condition: excellent (used), Year of construction: 2014, Polishing Machine for Furniture Fronts – Emme Elle Model 1350 For sale: Industrial polishing and buffing machine by Emme Elle, model 1350, ideal for furniture manufacturing plants, joineries, and spray shops. The machine is designed for the automatic processing and finishing of furniture fronts, lacquered panels, polyurethane coatings, and other surfaces, ensuring a smooth, even, and high-quality finish. — 📌 Key Product Features • Manufacturer: Emme Elle – a renowned brand in the Italian and European woodworking machinery sector. • Model: 1350 – working width up to 1350 mm, ideal for furniture fronts and large panels. • Condition: negotiable (used, in working order) – detailed information available upon request. • CE compliance: yes. — 🛠️ Technical Specifications • Working width: approx. 1350 mm – suitable for wide fronts and panels. • Table dimensions: approx. 1350 × 3200 mm. • Polishing components: – 4 rotating shafts with Ø 350 mm cotton discs, – 4 polishing drums Ø 180 mm. • Wax distribution system: automatic module for the application of polish/wax compound. • Motors: multimotor configuration ensuring power and stable operation. • Suction/de-dusting system: efficient extraction unit for dust and debris, improving finish quality. — Hnjdpfoyk Dfwsx Aiteu ✅ Applications The machine is dedicated to polishing and finishing furniture fronts, lacquered and veneered panels in production lines. Suitable for: • joinery and furniture manufacturing plants, • spray shops and finishing departments, • serial production as well as individual elements. It ensures uniform, high-quality surface finishes, reducing operator time and increasing production efficiency.

Condition: used, Holz Her Sprint 1329 Multi Heavy-duty version - Edge thickness 0.4 - 8 mm (15 mm with tool change) Edge Control 19 control system, 18.5" touchscreen color display 16:9 ECO mode - energy-saving mode fa.s.t. setting technology "Tool change in the gap" Hsdez Rl Tmopfx Aitsnu iTronic - adaptive pressure and adhesive application control and cleaning routine Motorized, position-controlled bridge height adjustment Long infeed guide rail, motorized, controlled via PLC Pre-milling unit for attachment before the gluing station Edge magazine, fully automatic for coil and strip material Gluing unit GLU-JET GJ301 automatic, cartridge system - granulate + PU adhesive, thin-film technology Edge height max. 65 mm Pressure unit DW 501, motorized-pneumatic, NC servo axis Cutting unit for coil and strip material up to 15 mm edge thickness With electro-pneumatic adjustment for 0-10° bevel of the cutting saw Multi-function milling unit MOT6 – 6 NC control axes, including air blow nozzles Flush trimming 8 mm (15 mm) Radius trimming Chamfer trimming 45° Copy milling unit MOT 6 Multi, corner copying, postforming corners with 6 NC control axes, for milling the upper and lower longitudinal edge and copy milling the front and rear end face, vertical edge, working height 60 mm with shelving program, including air blow nozzles Scraping unit MOT6 Multi, including air blow nozzles and chip scraper Surface scraping unit - finishing with pre- and post-scanning, including air blow nozzles Buffing unit for final polishing and edge polishing with 2 textile discs, swiveling 5° Spray device for infeed and outfeed area as well as antistatic agent and lubricant at the pressure unit Infeed area - electronically controlled release agent spray device Before the pressure unit - electronically controlled antistatic spray device After the pressure unit - electronically controlled lubricant spray device Outfeed area - electronically controlled cleaning agent spray device with cleaning agent First delivery 2022, very few running meters, from a craft business Machine is WORKSHOP INSPECTED in TOP CONDITION / Leasing possible Ex works

Condition: used, Year of construction: 2014, Modell: Brandt Optimat KDF 430 C Production year: 2014 Feed speed: 11m/min Workpiece thickness: 8-60mm. Edge thickness: 0,4-8mm. Premilling unit: Yes Hjdpfx Aiszkd Nzstonu Gluing unit: Yes, EVA End trimming unit: Yes Fine trimming unit: Yes Corner rounding unit: Yes Profile/Glue srapper: Yes Buffing unit: Yes

Condition: excellent (used), functionality: fully functional, Buffer belt, stainless steel dryer 3-piece buffer belt Belt width: 1500 mm Stainless steel Length: approx. 17.5 meters Width: 2500 mm Hnsdpswb Sqwsfx Aitsu Height: 3050 mm Weight according to specification: approx. 8000 KG Elements under the belt are not included

Condition: used, Year of construction: 2003, Used Machine Year of Manufacture: 2003 Features and Technical Specifications: Hnedpfszk Nwwex Aiteu - Control system with LCD display - Swiveling control panel - Program memory - Manual pressure bridge adjustment - Feed via conveyor chain - Extendable workpiece support - Joining milling unit 1961: - 2 x 2.0 kW - Diamond jointing cutters in synchronous and counter-rotating operation, Edge magazine 1903: - Support plate 820 mm, max. loading capacity 40 mm - Automatic feeding of roll and strip material Adhesive application system 1906: - Cartridge system with sensing nozzle - With automatic reloading - Compatible with PUR adhesives Press Unit 1816: - With driven roller - Pneumatic control of the press unit Trimming Unit 1918: - 2 x 0.22 kW - swivels from 0 to 10°, pneumatically adjustable Milling Unit 1942 MOT 2: - for flush, radius, and chamfer milling - motor-driven adjustment - Air nozzle on the milling unit Corner Copying Unit 1832: - Corner copying up to r = 3 mm, postforming up to r = 6 mm Radius Skiving Unit 1929 MOT 2: - Plastic edges up to 3 mm - Chip collection box for radius skiving blade Surface Skiving Blade 1964: - Insert-controlled surface scraper - Air nozzle on the surface scraper Buffing Unit 1940: - Edge thickness for roll stock: 3 mm - Edge thickness for strip material: 5 mm - Max. edge thickness for corner copying: 3 mm - Workpiece thickness: 6–45 mm - Workpiece thickness for corner copying: 45 mm - Min. workpiece length: 180 mm - Feed speed: 8 m/min - Workpiece support spacing: 470 mm - Support plate diameter for edge banding material: 800 mm - Trimming blade for roll material up to: 3 mm - Heating time: 3.5 min - Power of jointing cutter: 2 x 2 kW - Power of trimming saw: 2 x 0.22 kW - Power of the milling station: 2 x 0.6 kW - Power of the corner copying unit: 0.22 kW - Exhaust port for the jointing milling unit: 120 mm - Exhaust port for the milling unit: 70 mm - Exhaust port for planer unit: 70 mm - Dimensions: 5,350 x 1,669 x 1,940 mm - Weight: 1,200 kg

Condition: good (used), Used stainless steel pressure vessel / buffer tank Last use: Food industry Item number: 10732 Hnodpfxeimwc He Aitsu Volume: 900 liters Type: Standing, supported by 3 feet Material (in contact with the medium): 1.4571 / AISI316 Max. operating pressure: +2 bar Design: Single-walled Vessel dimensions: Outer diameter: 900 mm Cylindrical height: 1300 mm Overall width: 900 mm Overall length: 990 mm Overall height: 1870 mm Materials: Inside: 1.4571 / AISI316 External parts: 1.4301 / AISI 304 Features: Outlet diameter: 35 mm Distance from outlet to bottom: 65 mm Outlet valve: Ball valve Foot height: 270 mm, adjustable Nameplate: no Sight glass Spray nozzle

Condition: used, Year of construction: 2005, Edge banding machine Manufacturer: IMA Type: Advantage 600 Year of manufacture: 2005 Technical data Hodpfezuyirsx Aitjnu - Joint milling - Gluing unit for thin and thick edges - Imprint zone - 2x edge trimmers - Flush trimming - Multi-function trimming unit (MFA) - Profile trimming blade - Surface trimming blade - Buffing - Return system at the upper pressure roller Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 1996, - Double-sided IMA COMBIMA for longitudinal machining - Swiveling device - Double-sided IMA COMBIMA for transverse machining 1 used edge processing line IMA COMBIMA / K/ II/ R75 / 1075 / V / R3 Year of manufacture: 1996 Consisting of: - Double-sided IMA COMBIMA for longitudinal machining: Double edging unit 2 x milling units Gluing unit with granular pre-melting device Hjdjzuypxopfx Aitenu 6-position roller magazine for edge material 1 x main pressure roller and 4 x follow-up pressure rollers Cutting unit Flush trimming 2 x fine milling units Profile trimming blade Surface trimming blade Buffing unit Smoothing unit - Swiveling device from longitudinal to transverse - Double-sided IMA COMBIMA for transverse machining Protective milling Double edging Grooving milling unit Gluing unit with granular pre-melting device 6-position roller magazine for edge material 1 x main pressure roller and 4 x follow-up pressure rollers Capping at the top pressure (retrofit to current model) Flush trimming Fine milling 2 x MFA milling units Grooving milling unit Profile trimming blade Surface trimming blade Copy buffing (4 motors) Buffing (2 motors) Smoothing unit Note: The technical data and descriptions are a transcript of the order confirmation at the time. Data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2018, Used machine Used edge banding machine from Holz-Her, model Sprint 1329 Performance, with Return system from Barbaric, type RTS 01 Edge banding machine: Year of manufacture: 2018 Motorized roller bridge 1329 PERFORMANCE iTronic - Adaptive pressure and glue quantity control, automatic fine adjustment depending on the program Infeed fence, standard B20 mm Infeed fence for precise feeding of the workpiece Edge Control 19 control system with 18.5" touchscreen color display 16:9 Jointing cutter unit 1802 (2 x 2.0 kW, 200 Hz, 12000 min-1) with 2 cutter units for jointing the edge of the panel (1x forward rotation, 1 x reverse rotation) Edge feeder 1901 SYNCHRO, automatic transport of coil and strip material Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) Pressure unit 1913, motorized, 1 roller driven, 2 follower rollers Spray device (release agent) after the pressure unit with 2 spray nozzles for coverage up to 60mm working height Trimming unit 1918 (60 mm), pneumatic (2 x 0.45 kW, 12000 min-1), pneumatically swiveling 0/10° Cutter unit FR701, 100% repeat accuracy at the push of a button thanks to play-free mechanics Shaping cutter unit FF701, 100% repeat accuracy at the push of a button thanks to play-free mechanics Scraping unit 1929 MOT4 incl. high-gloss package with motorized adjustment of the feeler rollers Surface scraping blade FK701 with pre- and post-sensing for removing glue residue Motorized adjustment of the infeed fence for precise feeding of the workpiece to the jointing cutter unit Automatic chain lubrication / intelligent automatic transport chain lubrication GLU JET collection container Spray device 1856 for the infeed and outfeed area: Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 min-1) For final polishing and edge polishing. With 2 textile discs, swivel range 0 - 5° RETURN system connection (emergency stop interlocking) Connection of a workpiece return system to the control system from HOLZ-HER Machine dimensions approx. 5600 x 1010 x 1900 mm Machine weight approx. 2100 kg Return system: Year of manufacture: 2018 Machine number: 2180122-206 Further details can be found in the PDF Hedpfxozt Twte Aitonu Availability: by arrangement Location: Röllbach

Condition: new, Year of construction: 2020, functionality: fully functional, empty load weight: 135 kg, tank capacity: 500 l, pressure (max.): 6 bar, NEW! Packed!!! Dimplex standing buffer tank PSW 500, Universal buffer tank for sale in several pieces Nominal capacity 500 l, PU insulation (2.4 kWh/24h = 100 W), with three 1.5" sleeves for immersion heaters (up to CTHK 635) with two 2.5" heating water connections with DN 180 flange for installing RWT 500 finned tube heat exchanger with three adjustable feet Inclination angle 2.08 m Operating pressure 6 bar Height: 1950 mm Inclination size: 2045 mm Diameter: 700 mm Hnodsw Hcdlepfx Aitju Weight 135 kg Visszajelzés küldése Oldalsó panelek Előzmények Mentve

Condition: used, Technical details: wheel diameter: 780 mm table height above floor: 800 mm Table dimensions: 890x190 mm Hodpfxsu Ng Rto Aitonu grinding table: inclination: neigbar Grad total power requirement: ca. 2,0 kW weight of the machine ca.: 0,2 t space requirements of the machine approx.: L:1,2xB:1,05xH:1,3 m Double Disc Grinding Machine - Its based on a molding machine body foundation as a whole. - application range: metal, wood, plastic - ginding disc surface diameter:680mm - grinding disc material: sand paper - sucction noozle: 80x120mm *

Condition: used, Year of construction: 2020, Used machine Year of manufacture: 2020 Features: - Aggregate control via touch-screen - Joint milling unit - Glue pot - End trimming unit - Radius milling unit Hnodpfox Enquex Aitju - Radius scraper unit - Flat scraper unit - Buffing unit - Spraying unit (front and rear) Location: Rhineland-Palatinate Availability: By arrangement Sale on behalf of customer. Details provided without guarantee.