Used Brush Machine for sale (91,727)

Year of construction: 2025, condition: new, Brush ageing machine Valmec 600 working width 600 mm feed speed 4-12 m/min motor power 2 x 4kw two brushes in set, wire + tynex independent height adjustment of brushes power supply 400V Iijdpfxsgk T Eto Afish machine new

Year of construction: 1997, condition: used, Brush deburring machine RSA RASAMAX MONO for brushes Ø 250 mm and approx. brush width 80 mm speed range 1500 / 3000 rpm operating voltage 380 volt total power requirement 2,0 / 3,0 kW Weight approx. 180 kg Isdpfx Asimbq Dofioih for deburring of sheet metal with contours for material thickness from approx. 1,0mm to 6,0mm. Brush speed 2-stage 1500 or 3000 rpm Machine is located in 71334 Waiblingen-Beinstein and can of course be inspected, please contact us.

Condition: new, GRATMAXX Bürstentgratmaschine The machine is suitable for the deburring of edges on: Round tubes, square tube, rectangular tube, full materials, profiles of all kinds. Materials: Steel non-ferrous metals, plastics, hard or soft. Work flow: After setting the workpiece support and dern side stops the Ridge-workpiece is easily kept on the brush rotating around its own axis, without rotating the workpiece, this movement is also the brush. The workpiece material, the Ridge strength, as well as the desired rounding of the edges determine the pressure and the duration of contact seconds, usually around 1-5. Technical data: Material: Steel, stainless steel and non-ferrous metals (engine speeds 700-1,900 rpm, infinitely variable) Min. workpiece-Ø: 5 mm Maximum work piece-Ø: 100 mm (150 mm) Brush dimensions: 2 piece Ø300 (250) x 50 or 3 piece Ø 300 (250) x 35 Isdpfxjd Hmnfe Afisih Power: 3,0 KW Power: 3.5 KW Operating voltage: 3 ~, 400Volt, 50 Hz Rated current: 8A Back-up fuse: max 16A Control voltage: 24V/DC Width: approx. 500 mm + Handwheel 74 mm, + dust spout 130 mm Altitude: 1.382 mm Working height: approx. 1.080 mm Depth: 1,209 mm Weight: 310 kg Sound pressure level: At speed 700 rpm 64 dB(A) at a speed 1500 rpm 74 dB(A), when machining a workpiece with maximum speed of 82 dB(A) Scope of delivery: Rotary head Bürstentgratmaschine GratMaxx with power socket without cable Workpiece support table with adjustable angle stop and

Year of construction: 1990, condition: good (used), used brushing machine with wacuum table Iedpfx Afed Tanyeioih

Year of construction: 2025, condition: new, functionality: fully functional, The DANIBRUM SIP series of brush sanders is a complete solution for the professional finishing of wood, MDF, milled or composite panels. Comprising the SIP610, SIP810, SIP813 and SIP1013 models, the range covers the varied requirements of processing workshops and medium and large industrial units SIP610 is an automatic brush sander, designed with state-of-the-art technology to perform finishing processes on flat and profiled surfaces with maximum precision. The equipment is ideal for rounding off sharp edges, cleaning the surface of fine dust, as well as preparing for painting or varnishing Whether used in a medium-sized workshop or in an industrial line, the SIP610 offers a constant output and a uniform quality of finish, with a minimum of manual interventions The high-quality brushes apply a controlled and adaptable pressure, which allows for the effective removal of imperfections without damaging the material Equipped with a PLC control system and a touch screen interface in Romanian, the SIP610 is easy to use, even for less experienced operators. Predefined programs allow rapid adaptation to different types of materials Thanks to SICK brand encoders and the electrical adjustment system of the working groups, extremely precise positioning can be achieved, with deviations of only 0.1 mm From solid wood to MDF or composite panels, the SIP610 can be successfully used for a variety of applications, offering consistent and superior results Individual electrical adjustment for each sanding group, which allows fine setting depending on the material Rotating discs with double direction of rotation and oscillation, for complete coverage of the workpiece Synchronized oscillation drums, which contribute to uniform contact with the workpiece surface Fast Release system for sanding discs The groups can be extracted laterally, making maintenance and brush changes easier Rubberized feed belt with increased grip, with milled profile for optimal traction Toothed belt transmission and oscillation reducer, which reduces vibrations and noise Linear guides with recirculating balls for smooth and precise movements Schneider electrical components and XINJE frequency converters, guaranteeing reliability and constant control Ergonomic swivel control panel, allowing intuitive operation from multiple positions LED light for increased visibility in the work area Built on a solid metal structure, the SIP610 is designed to withstand demanding industrial environments. The 4 vertical cylinders supporting each sanding group ensure evenly distributed pressure, which helps reduce wear While the SIP610 is recommended for medium-sized workshops or industrial spaces with constant production flow, the SIP810, 813 and 1013 are designed for complex requirements or large work volumes The models in the SIP range are equipped with similar digital control technologies, efficient exhaust systems and industrial-quality components Iodpfx Afowgw Tzeieih The SIP610 model, with automated functions, precision control and adaptability to various types of panels, is a reliable partner in any production environment. By expanding the range with the SIP810, SIP813 and SIP1013 models, the SIP series completely covers the needs of a modern wood industry Technical support in Romanian - English - German

Condition: new, Year of construction: 2024, operating hours: 2 h, functionality: fully functional, working width: 400 mm, brushing unit diameter: 210 mm, total length: 1,350 mm, total width: 900 mm, total height: 1,540 mm, height adjustment type: mechanical, overall weight: 500 kg, extraction nozzle diameter: 100 mm, workpiece height (max.): 315 mm, workpiece width (max.): 400 mm, VALMEC Master 400 Aging Machine, Brushing Machine Specification: • condition - new • manufacturer - VAL.MEC • model - Master 400 • working width - 400 mm • max working height - 315 mm • brush diameter - 210 mm • first brush - steel • second brush - tynex • engine power - 2 x 3.0 kW + feed 0.37 kW • engine starting - 0-1 • conveyor speed smoothly regulated by an inverter in the range of 4-12 m / min • possibility of changing the direction of rotation of the rear brush • independently adjustable height of both units • output for sawdust extraction - fi 100 mm • 2024 year of production • weight - 500 kg • complete sets of documents from the manufacturer • overall dimensions 135 x 90 x 154 cm (length x width x height) ) Iedeuwdb Ejpfx Afijih Additional information: • new machine, in factory condition • presented photos show the actual condition of the item for sale • possibility of switching on and checking the device on site. • price given in the auction does not include VAT

Condition: ready for operation (used), working width 1300mm rotor with 4 brushes edge brush additional outfeed brush variable regulated feeder variable regulated rotor speed variable regulated brushes speed Ijdotzllropfx Afieih electric regulation of rotor connection 380v

Condition: new, Year of construction: 2025, functionality: fully functional, MODEL KD-BR Minimum size of part 50mm Function Deburring , chamfering Electronic component schneide Bearing NSK Max working width 450mm 800mm 1000mm 1300mm 1600mm Max thickness 80mm transferred speed 1~10m/min power of lift motor 0.37kw/2 power of propeller motor 7.5kw/1 brush roll motor power 2.2kw/2 Iisdpfsvx Tllex Afish transferred motor power 1.5kw/1 Total power 26.64kw Diameter of brush roll 300mm NO. of brush roll 4 / 6 / 8 Machine size 2350*1450*2200mm Weight 2600kg

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 5 h, functionality: fully functional, Brush Sander Manufacturer: Cosma Type 300 H4 C Year of manufacture: 2023 (demonstration machine with warranty!) Brush sander for 4-sided sanding of strips, scaffolding boards, profiled timber, etc. Working height: 900 mm Working width for 4-sided sanding: 300 mm 2 cylindrical brush units (top and bottom), each 2.2 kW, 1000 rpm. 2 side disc brush units, each 0.37 kW, 750 rpm. Manual height adjustment of the units Adjustable feed rate, approx. 2 - 10 m/min. Control panel: Iodowkqmpopfx Afioih -Brush on/off -Transport speed Product dimensions: Minimum product length: 800 mm Maximum product width: 300 mm Height: 20 - 100 mm

Condition: good (used), Year of construction: 2001, total width: 700 mm, total length: 1,050 mm, total height: 1,400 mm, disc diameter: 250 mm, overall weight: 100 kg, Double brush polishing machine, with 2 exhauster stands, Motor 2-speed, 1,3 / 1,7 KW, speed 1400/2800 rpm., Dia brushes 250 x 25 x 60 mm, dimension 1050x700x1400 mm, weight 100 kg Iiedpfxowhzh Ej Afioh

Condition: excellent (used), Year of construction: 2010, Stock number: 2982 Manufacturer: RSA Year of manufacture: 2010 Type / Model: RASA DUO Machine number: R-III-07-2684 Workpiece diameter: up to 90 mm Workpiece length: from 100 mm Deburring time: 1 - 5 seconds Iodswdvtnspfx Afioih Speed: 1,500 / 3,000 rpm Workpiece shapes: round tubes, shaped profiles; solid material, sheet metal Material: steel, stainless steel, non-ferrous metal Support: mm Height adjustment: mm Brush diameter: 250 mm Brush width: 80 mm Power supply: 2.6 / 3.1 kW Accessories/equipment: spare brush, support, operating instructions Condition: very good Weight: kg Dimensions: 910 x 440 x 1,200 mm

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 1503, working width: 1,000 mm, workpiece width (max.): 800 mm, workpiece height (max.): 100 mm, workpiece length (max.): 4,000 mm, TECHNICAL DETAILS Working width: 1,000 mm Brushes: Fladder, grit 100 Maximum workpiece width: 800 mm Maximum workpiece height: 100 mm Maximum workpiece length: 4,000 mm Ijdowa T Saspfx Afioih MACHINE DETAILS Voltage: 3 × 400 V Frequency: 50 Hz Current: 50 A Protection class: IP54 EQUIPMENT - Vacuum carpet - Vacuum pump - Additional brush set, grit 100

Condition: new, Machine for grinding, deburring, rounding and polishing, manual, mobile use with vacuum system, alternatively also with magnetic system, starter kit and 1 brush CE-certified, designed with double emergency stop circuit and reset system Weight 445 kg Dimensions 1435x1100x1510mm high Working height 950 mm Work surface 1280x780 mm Minimum workpiece dimensions 20x20mm Maximum workpiece height 120 mm Maximum width of workpiece: unlimited length, with maximum width 780 mm Maximum workbench load 100 kg Operation: Double manual operation Number of work stations 1 Quick holder for brush M14x2 left-hand thread M14x2 right-hand thread for abrasives Brush design Disk brush Ø150mm with quick-change system Various brush variants possible, depending on material, we will be happy to advise you. Bia2Qk2S2I Brush power 0.75kW frequency-controlled motors Isdpfx Aet Dpxbjfijih Brush motor speed 150 - 1500 r.p.m. Workbench Carpet / Special friction design Vacuum system fixation in the workbench (standard) Vacuum system kW 2.2 kW Also available with additional magnets as an option (available from stock) Electrical values Voltage V 400 V (3L+N+PE) Frequency Hz 50 Hz Current A 10 A Power kW 6 kW Plug-in device CEE 400 V / 16 A (5-pole)

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, working width: 800 mm, pass-through width: 850 mm, rotational speed (max.): 900 rpm, rotational speed (min.): 350 rpm, Equipment: rotational speed infinitely variable, Brush Grinding and Distributor / Universal Brushing Machine Manufacturer: Leif Lorentz / Universal Finishing Systems Type B 4 1000 Universally applicable as a distributor, dust collector, and workpiece cleaning unit, or for grinding. Iiodpfjvyh Uqex Afieh Year of manufacture: 2005 Working width: 800 mm Belt width: approx. 850 mm Passage height: approx. 60 mm 2 brushing units from above, each 1.1 kW, continuously adjustable speed, 350-900 rpm Brushes as supplied. Machine dimensions: approx. 2400 x 1300 x 1700 mm

Condition: new, Type 300 Brush roll width 320 mm Brush roll diametre 300 mm Working part 300 mm Drum diameter 180mm Iiodpfx Afjfhnx Seieh Spindle 35 mm Transport dimensions 330x300x300 mm Weight 5,2 kg

Condition: like new (used), Year of construction: 2020, For Sale: Brushing Machine CR24 Manufacturer: ELDRUT SYSTEM, Kielce, Poland Model: Brushing Machine CR24 Serial Number: 9/2020 Year of Manufacture: January 2020 Iiodpfx Afowu Di Esioh Power Supply: 400V, 50 Hz Certification: CE The machine is in very good condition, ideal for industrial brushing applications. Reliable construction according to European standards.

Condition: new, WMD25LV - 230V / 1F Drilling capacity steel ----- 25 mm Milling capacity steel ----- 20 mm Flute cutters ----- 63 mm Motor ----- Brushless 750W Spindle speed stepless 50 - 3000 rpm Spindle stroke ----- 50 mm Spindle mounting ----- MK3 Work table ----- 700 x 180 mm Cross travel ----- 150 mm Longitudinal displacement ----- 490 mm T-slots ----- 3x12 mm Iisdpega T Eiefx Afish Unloading ----- 170 mm Distance spindle - table ----- 325 mm Weight ----- 160 KG STANDARD ACCESSORIES * Drill head incl. drill chuck * Digital depth stop * Digital spindle display * Fine adjustment * Left / Right switch * Milling head left / right 90 degrees rotatable * Box with various tools OPTION * Support box € 249,00 ex vat

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4650x2230x2135 mm Weight 5800 kg Total power requirement 19,8 kw Ijdpfxjvz Epuo Afioih

Condition: used, Year of construction: 1989, total width: 1,600 mm, Lisec max 1600-6mm Iiodpovy D Akjfx Afioh Year: 1989 Working width - 1600mm. Glass thicknesses 2 – 26mm. Minimum glass size 350 x 180mm. Pre-spray over 1200mm long driven in feed conveyor. 3 wash sets each with a pair of cylindrical brushes, recycling tank, heaters. Tank withdrawal to left side, p S-WSH-383

Condition: new, WMD20LV - 230V / 1F Drilling capacity steel ----- 20 mm Milling capacity steel ----- 20 mm Flute cutters ----- 63 mm Motor ----- Brushless 750W Iiodpfx Ash S E Sbofieh Spindle speed stepless 50 - 3000 rpm Spindle stroke ----- 50 mm Spindle mounting ----- MK2 Work table ----- 700 x 180 mm Cross travel ----- 150 mm Longitudinal displacement ----- 490 mm T-slots ----- 3x12 mm Unloading ----- 170 mm Distance spindle - table ----- 325 mm Weight ----- 150 KG STANDARD ACCESSORIES * Drill head incl. drill chuck * Digital depth stop * Digital spindle display * Fine adjustment * Left / Right switch * Milling head left / right 90 degrees rotatable * Box with various tools OPTION * Support box € 249,00 ex vat

Condition: new, WMD30LV - 230V / 1F Drilling capacity steel ----- 32 mm Milling capacity steel ----- 20 mm Flute cutters ----- 76 mm Motor ----- brushless 1.5 KW Spindle speed stepless 50 - 3000 rpm Spindle stroke ----- 70 mm Spindle mounting ----- ISO 30 Worktable ----- 840 x 210 mm Cross travel ----- 220 mm Longitudinal displacement ----- 565 mm T-slots ----- 3x14 mm Unloading ----- 240 mm Distance spindle - table ----- 470 mm Weight ----- 230 KG STANDARD ACCESSORIES Iisdpfxsga T Ago Afieh * Drill head incl. drill chuck * Digital depth stop * Digital spindle display * Fine adjustment * Left / Right switch * Milling head left / right 90 degrees rotatable * Toolbox OPTIONS * 3-axis digital readout * Base cabinet * Automatic longitudinal feed * Milling clamp * ISO30 Collet holder & 12 collets in case * Milling set

Condition: good (used), Single-shaft polishing machine, movable table 2500x1000 mm with oscillation, motor controlled by frequency inverter. Iedexmh Nkjpfx Afieih

Condition: as good as new (ex-display), functionality: fully functional, overall weight: 850 kg, power: 5.52 kW (7.51 HP), input voltage: 400 V, input frequency: 50 Hz, grinding width: 650 mm, Further technical data Grinding height: 3 mm - 200 mm (250 mm) Grinding width: 650 mm Extraction connection: 2 x 120 mm Feed speed: infinitely adjustable 2.5 - 10 m/min Iiedpfx Ajw Axi Asfieh Standard equipment - Maintenance interval control - Plain text error messages - Constant infeed height – fixed table, 900 mm - Electric height adjustment incl. fine adjustment from the control panel - Feed speed steplessly adjustable from 2.5 to 10 m/min via inverter at the control panel - Endless belt conveyor - Automatic feed mat centering - 1st brush unit with selectable steel brush, counter-rotating operation, mechanically preloaded rubber pressure rollers, 1 motor with 4 kW and cutting speed of 1000 rpm - 2nd brush unit with Tynex brush K60 D=200mm, counter-rotating operation, mechanically preloaded rubber pressure rollers, 1 motor with 4 kW and cutting speed of 1000 rpm - Dimensions: 1455 x 1070 x 1250 mm - Required air pressure: 6 bar Optional equipment 022 7.5 HP (5.5 kW) motor power, 1st unit 024 7.5 HP (5.5 kW) motor power, 2nd unit 027 Oscillation control for 1st and 2nd brush units 028 Opening height 250 mm instead of 200 mm

Condition: new, Year of construction: 2024, functionality: fully functional, working width: 600 mm, brushing unit diameter: 150 mm, height adjustment type: electric, working height: 300 mm, power: 5.5 kW (7.48 HP), Brushing machine Houfek Twingo 600 BB 400V/50Hz, 2x5.5 HP (4 kW), width 600 mm Basic equipment: 1.1 Motor 4 kW (5.5 HP) per B-unit 1.2 Tool turning diameter 120-300 mm, working length 600 mm 1.3 Independent height adjustment of the working units 0 - 300 mm 1.4 Fixed table h=900 mm 1.5 Expansion shaft D=40 mm Iisdpfx Afeu Rnb Nsijh 1.6 Two rubberized pressure rollers on the work unit, height-adjustable 1.7 Electric stroke of the work unit(s) + scale with unit height indicator 1.8 Two feed belt speeds 4.5/9 m/min - replaced by P81 10 1.9 Brush protection cover 1.10 Suction nozzle diameter for unit B and Q D=120 mm 1.11 Machine is not equipped with the tool for 2nd unit 1.12 Voltage 400V/50Hz 1.13 Packed in PE film as standard 1.14 Machine built according to CE power and safety standards Additional equipment installed in this machine: - 2x motor 5.5 kW 7.5 HP - Automatic feed belt centering - Frequency converter for feed belt speed 3 - 15 m/min - Oscillation for one brush unit with the possibility of switching off - 2x return of the main motor (1 unit) (synchronous and counter-rotation possible on both units)

Condition: used, Year of construction: 1995, functionality: fully functional, machine/vehicle number: 15514, This used wood brushing machine, RUSTIK MASTER 400, is designed for final surface finishing — fine sanding, structuring, smoothing, and other finishing operations. The specific surface treatment depends on the type of tool used — the brush. The machine is suitable for small and medium-sized wooden workpieces, including composite materials based on wood and certain plastics. 1. Independent unit with 1 orbital brush — 3 kW motor 2. Independent unit with 1 orbital brush — 3 kW motor 3. Independent unit with 2 rotary brushes — 0.37 kW motor Surface finishing, structuring, and grain enhancement. These processes are primarily intended for treating the surfaces of solid wood workpieces. The aim is to create or accentuate the natural wood grain. Brushes of various hardness are supplied for this purpose. The appropriate tool selection depends on the production process and the desired structure. The working parts of the tools are made from both synthetic and metallic fibers with different properties. If non-original brushes are fitted, the machine can be used for additional operations such as surface cleaning, polishing, fine finishing sanding, and more. Features: - Open design allows brushing of workpieces up to 800 mm wide - Infinitely adjustable feed speed - Independent height adjustment of each working unit - Manual lift of working units with height indicator - Precision linear guides for maximum accuracy and rigidity - Infeed and outfeed spring-loaded, adjustable pressure rollers at each head for optimal workpiece stability - CE electrical and safety standards - Manufactured in EU - Equipped with tools + option to buy additional brushes: Steel, TYNEX P46, P80, and P120 - Year of manufacture: 2015 Technical data: Working width: 400 mm Brush motors: 3 kW + 3 kW + 0.37 kW Feed motor: 0.55 kW Brush diameter / rotation speed: 210 mm / 1,000 rpm Minimum workpiece length: 250 mm Maximum workpiece height: 300 mm Feed speed (frequency converter): 4–12 m/min Iodpfxoxhhxne Afijih Dimensions: 2,120 x 910 x H 1,530 mm Total weight MASTER 400: 700 kg