BRUSHING MACHINE + SANDING MACHINE

WANDRES

Condition: used, machine/vehicle number: 007307, Max. working width: 3200 mm Fgsdpfjuaq D Aex Akyjh Max. working thickness: 60 mm

Condition: used, functionality: fully functional, Performance for 6 mm diameter pellets 2.5-3 t/h We used it for about 5 years. It was purchased used but in very good condition. All bearings were replaced 1 year ago. It was working very well before it was disassembled. A new die with rollers has been manufactured for it and is available for an additional price. For additional information, please write on Whatsapp. Fgedpfox S Ibgsx Akyjh

Condition: excellent (used), Machine suitable for the polishing and the cleaning process (top & bottom) of panels. To be positioned on a motorised roller conveyor following a drilling machine, a double-sided edge bander or double-end tenoner - Top cleaning system (motorized rubbered cross belt with brushes) Motor power: Kw 0.19 - Bottom cleaning system (motorized rubbered cross belt with brushes) Motor power: Kw 0.19 - Max useful working width mm 3500 Fodpfxjyw Rnyo Akyegh

Condition: excellent (used), Machine suitable for the polishing and the cleaning process (top & bottom) of panels. - Top cleaning system (motorized rubbered cross belt with brushes) Motor power: Kw 0.75 - Bottom cleaning system (motorized rubbered cross belt with brushes) Motor power: Kw 0.75 - Upper (top) section lifting motor: 0.25 kW - Max working width mm 1300 ca. Fgodpjyw Rqhefx Akyoh - Built-in control panel

Condition: good (used), Year of construction: 2004, Peripheral devices Brand: Tool - Temp Type: TT - 157E Fgjdoh Hbpwopfx Akyoh Available: 14 pieces

Condition: excellent (used), Machine suitable for the polishing and the cleaning process (top & bottom) of panels. - Upper cleaning system (with 2 motorized rubbered cross belts with brushes) Motor power: Kw 0.19 Fgjdpfsyw Rqzsx Akyoh - Lower cleaning system (with 2 motorized rubbered cross belts with brushes) Motor power: Kw 0.19 - Max working width mm 2000

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 06 08 20, compressed air connection: 6 bar, power: 3.5 kW (4.76 HP), input voltage: 400 V, input frequency: 50 Hz, We are offering this used WANDRES CF 05/2750 brush machine, manufactured in 2006. Type: CF 05/2750 Year of manufacture: 2006 Machine no.: 06 08 20 Voltage: 400 V Frequency: 50 Hz Power: 3.5 kW Compressed air connection: 3/4" Pressure: 6 bar Residual oil content: ≤ 1.5 mg/m³ Filter fineness: ≤ 40 µm The machine is sold including 2 new spare belts, with a value of approximately €1,000. If you have any questions or require further information, please feel free to send us a message or call us. Fgjdpozfprdefx Akyoh The machine is disassembled and ready for loading.

Condition: excellent (used), Year of construction: 2015, I sell the 2-head UV-drying tunnel Superfici Essiccatoio UV Model: Poliedra S.Cure 1650x2 + TT1 3500. Year 2015. Available immediately. Repairs needed: Display, Energy power units for each two UV-units Fedpeffk Etefx Akysgh

Condition: new, • Usable width A (mm): 3200 • Order number: 6732601 • Available: 2 units Fgsdpjfrux Ajfx Akyoh

Year of construction: 2004, condition: used, - working width (mm): 400 - Brush: top and bottom - Spraying device Fgedpjnl D U Iofx Akyjh

Year of construction: 2017, condition: used, Used machine Year of manufacture: 2017 The Barbaric TSRET04 return system is a workpiece return unit for edge banding machines. It is the most basic version in the TSRET series and serves the following functions: - Transfers the workpiece at the end of the edge banding machine - Returns the workpiece to the height of the infeed of the edge banding machine Functionality After passing through the edge banding machine, the workpiece moves onto a roller table. The transfer is carried out by belt conveyors moving perpendicularly to the conveying direction, which rise from the roller table, lift the workpiece, transport it sideways, and set it down on a slightly lower roller table. This roller table conveys the workpiece to a belt conveyor. At the end of the belt conveyor, a non-driven, slightly inclined roller conveyor toward the edge banding machine’s infeed is connected. A stopper halts the workpiece at the end of the roller conveyor. Technical data - Max. load capacity: 60 kg - Max. panel size: 2,800 x 1,300 mm - Cycle time: max. 11 pieces/min Dimensions: Fsdpfxox Rpgbs Akyjgh - Return: 2,293 x 1,961 mm - Conveyor belt (L x W): 2,500 x 800 mm - Roller conveyor (L x W): 2,000 x 800 mm - Total length: approx. 6,943 mm - Total width: approx. 2,239 mm Availability: short-term Location: Flörsheim