Used Briquetting for sale (160)

Condition: new, Year of construction: 2026, Production time of the machine approx. 3.5 months Very robust machine with high pressing force - is also suitable for producing a saleable briquette quality *depending on the material. The large press cylinder and the 65 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to faults + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Good price-performance ratio Options: Surcharge for cooling unit + € 3,995 net, (can also be retrofitted later) * cools the press tongs (important from 3.5 hours) and the hydraulic oil * Cooling unit recommended for regular operation of more than 3.5 hours at a time. Bsdpfxoffh Atj Ak Eolg Large pre-compressor chamber + € 1,975 net recommended for light starting materials such as wood shavings Product code: 84793010 Briquette diameter: 65 mm Front bush: 65 mm Briquette stroke max.: 50 mm Briquette stroke opt.: 50 mm Output (depending on material): up to 110 kg/h* approx. 87 kg/h in the last test. *depending on the bulk density *based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0.7 qbm Pump: 37 liters Hydraulic pre-compressor Cooling press tongs option: yes, with special accessory Coolable press tongs Cooling of the pressing tongs via water tank (to be procured on site) Hydraulic oil cooling option: yes Fill level monitoring option: yes Briquette option: yes (depending on material) CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18 % - Chip length maximum 15 mm - Installation temperature: tempered room at a minimum of +5°C - The feed must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and / or increased wear may result

Condition: good (used), Refurbished machine Basic machine starts at a price of 147.700 € net *Options at additional cost, see below with a full 1 year warranty Ready for delivery approx. 16 weeks after ordering Technical specifications: Throughput up to 1200 kg / h depending on the material (e.g. sawdust with a bulk weight of 150/180 kg / qbm) Briquette Ø 75 mm including 2 m press channel Main motor power 45 kW Feed screw gear motor 2 x 2.2 kw Compressor screw 2 x 5.5 kw Distribution auger 2.2 kw Hydraulic pump motor 0.37 kW Total connected load 65 KW Control panel with plain text display for operating states and utilization display for main drive and feed screws PLC control Siemens S7 / 300 with operating hours counter in the control cabinet Machine hat CE mark Automatic start / stop function of the machine Dimensions 3100x860x1800 mm lxwxh Weight 4500 kg Options: -Silo for MAP series Storage silo above the machine - Contents approx. 6 square meters, stable steel construction with agitator discharge and level indicator. 19,700 € net plus VAT. *only possible for one presse MAP 1200 below the silo if you need to place two machines MAP 1200 below one silo it needs to be build completely different. the price for this silo is 37.900 € net -Temperature control device for the pressing tools to maintain the temperature for optimal briquette size. Temperature controller for pump, cooling unit, fan, pressostat Wired ready for connection - must be left for operation including corresponding control € 7.850 net Oil heater Blsdpfo E Dqujx Ak Ejg 1.950 € net -Guillotine, to cut the briquettes to length Create a compressed air connection on site € 6,940 net plus VAT -Transport line / cooling section (nominal value: 4x2m) 990 euros net per 2 meters - Control System 4.995 € net Assembly / commissioning (nominal value approx. 2-3 days on site to install one press) based on effort and upon proof against separate invoice. The following sentences apply: Service technician/mechatronics technician per assembly and hour of travel: €129.00 Overtime: 25% surcharge 50% surcharge per Saturday and night hour 100% surcharge for every Sunday and public holiday hour Release per fitter per day: country dependent Per car, van and driving kilometer: €0.98 / km Arrival and overnight stay against receipt or flat rate bill at the client's expense. . Test with the respective customer material: (up to a maximum of 750 kg) - €1,970 net flat rate --- Recognition from the raw material: - The moisture content must be between a minimum of 6 and a maximum of 18% - Maximum span 20 mm - Excessive temperature: temperate room at at least + 5 ° C. - The loading must be free of metals and mineral impurities. This and the pressing tools and / or responsible wear can be the result

Condition: like new (used), Year of construction: 2024, operating hours: 29 h, *one machine is ready for delivery and ready produced Press can only be supplied with a system component such as a chipper, cutting mill, hammer mill, screw conveyor, conveyor belt with overbelt magnet or suction RUF briquetting press for rectangular briquettes Very robust and established machine The ideal machine for professional, industrial briquette sellers. Classic type - throughput up to 425 kg / h * depending on the material Options for an extra charge: Plant construction / mütek system technology: - mütek shredder MRZ shredding technology - conveyor belts - Overbelt magnets - Extraction systems, optionally with rotary valve - screw conveyors - silos - Control links of all kinds - semi-automatic packaging technology Press: - Packing table with drawer - Top-mounted silo with discharge Your advantages: Most important point: + Very established, well-engineered die press thanks to 25 years of experience. The difficulty and the know-how lies in the detail. For example, valves and cylinder seals of the highest quality. + 24h operation possible + Longevity + Low maintenance costs + Compact structure + High energy efficiency thanks to innovative hydraulics Technical data briquetting press: Throughput: up to 425 kg / h * * depending on the bulk weight of your raw material * based on a bulk weight of 200 kg per cubic meter Detailed information after a successful test with your material. If no test material is made available to us, we cannot make any statements about the briquette quality and throughput. Briquette dimensions: 150 x 60 mm Briquette length: 40 to 105 mm (adjustable) Hydraulic pre-compressor Main hydraulic compressor Pressing pressure: up to approx. 1700 kg / cm² Hydraulic system with 260 liter oil tank Pump motor: 30 kW / 400V / 50Hz / 3 ph Manual operation of all cylinders "Dustproof" switch cabinet with PLC control and touch display Total power consumption of the briquette press: approx. 33 KW Bledpfx Asfhql Tek Eeg Muxzr8 Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 15% - Maximum chip length: 20 x 2 x 2 mm - temperature where machine is placed + 8 degrees - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2000x1600x1500 mm Bledpfx Akevz Efvs Eog Weight 1550 kg Total power requirement 11,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1700x1170x1510 mm Weight 650 kg Blodpfxovz Eqfe Ak Ejg Total power requirement 6 kw

Condition: used, Year of construction: 2019, Used machine Identical in construction to Weima C 150 Year of manufacture: 2019 1845 operating hours Equipment and technical data: Blsdew Rhk Dopfx Ak Eeg Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil capacity: 160 l Throughput capacity: up to 50 kg/h (depending on material) Connection rating: 400 V +/- 5% / 50 Hz Includes: Press mechanism with filling cylinder, main cylinder, clamping cylinder Connection part for transport line Chromed clamp Hydraulic tank 160 l with pump motor + valve control Safety switch for oil temperature Control cabinet and electrical control system Briquette length monitoring Automatic end position for all cylinders Manual control Automatic "On/Off" with level limit switch Material: shavings, sawdust from solid wood, loose, clean and free from contaminants* Maximum dimensions: 10 mm Throughput performance: approx. 50 m³/year/ * Contaminant specification: Everything except wood, wood pieces larger than 15 mm. The throughput capacity is highly dependent on the material. Stated values are averages. May vary depending on mix ratio, moisture content, and material characteristics! Application case not known or not fully specified. Machine is being sold appropriately and solution-oriented by a specialist dealer. With oil cooler or water cooling; ensure adequate ventilation for the press/unit/oil cooler. In case of heat build-up, operating time may be drastically reduced due to increased temperature. With new press clamp Availability: by arrangement Location: Flörsheim

Condition: good (used), Technical data: Briquetting press RUF RB 440 Bljdpfjt H D Ezjx Ak Esg Press capacity when pressing wood: up to a maximum of 440 kg/hour Material moisture: maximum 15 % Motor power: approx. 30 kW Briquette size; rectangular: 150 x 60 mm Length: 40 - 110 mm Dimensions approx. 1680 x 1800 x 2000 mm Weight: 3000 kg

Condition: good (used), Technical specifications: Briquetting press in good condition Year of manufacture: 2007 Bedowtdk Tspfx Ak Eelg Technically inspected in 06 / 2025 Cylindrical briquette: 80 mm Throughput up to max. 150 kg/h *only approx. 3,949 operating hours - Hydraulic press: briquetting press with discharge chute - Hydraulic unit: 4 kW - Pressure: max. 300 bar - Transport dimensions: 1585/2140/H1940 mm - Weight: 1,370 kg Functional guarantee upon handover We are happy to arrange a free test run!

Condition: new, Year of construction: 2025, functionality: fully functional, Specialised press built from the ground up for briquetting of iron, steel and similar alloys. Includes integrated oil collection pads. Does not include packing table – only briquette guides (slides). Comes with see through bunker doors & oil heating elements as standard. Machines are controlled by Siemens KTP-400 touchscreens. 2nd generation available for purchase from February 2024. For this press please first contact us! Technical Data : Throughput: Up to 600 briq/h* Main motor: 30kW Infeed motors: 2.6kW Cooling system: 1.6kW Total power: 34.2kW Oil tank: 260l Filters: 4 Length: 2000mm Bodpstmugcjfx Ak Eolg Width: 2000mm Height: 2200mm Weight: 3500kg Briquette size: 40-110, D80mm Warranty: 2 years / 2 000 workhours

Condition: new, Year of construction: 2025, Dimensions: length 1800 mm, width 1800 mm, height 1900 mm . Blodpfxjc Nb Rfo Ak Eeg Weight netto 3000 kg. Eletric power of the press: 380 V 50 Hz 33 kW 70-100 A Capacity of the press: 450-500 kg/h Pressure: minimum 1000 kg/cm², maximum 1700 kg/cm2 Dimensions of the briquette: length 150 mm width 60 mm height 40 – 105 mm

Condition: new, 20-26-537/1 FALACH hydraulic briquetting press (new) Type 50 Briquette diameter 50mm Press capacity 40 - 60 kg / hour Briquette length approx. adjustable 35 mm Hopper volume 0.38 m3 Pump motor input 5.5 kW Power consumption 3.8 kW / hour Required input voltage and current 3x400V, 16 A Oil cooler yes Blodexrn R Eopfx Ak Ejg Operation continuous Automatic reverse of support wheels yes Automatic switching-out yes Maximum percentage of moisture 15 % Specific weight of briquettes 900 kg / m3 Maximum noise level 68 dB Transport dimensions 1860 - 890 - 1100 mm Weight 390 kg Price 13 030 Eur (EXW Jonava, Lithuania)

Condition: new, 20-26-537/4 FALACH hydraulic briquetting press (new) Type CUBE 20 Briquette diameter 30 x 30 mm Press capacity 10-25 kg/hour Briquette length approx. 6-50 mm Hopper volume 0,28 m3 Pump motor input 2,2 kW Power consumption 1,1 kW/hour Required input voltage and current 3x400V, 16 A Oil cooler no Operation continuous Bsdpfoxrn Uwox Ak Eslg Automatic reverse of support wheels no Automatic switching-out no Maximum percentage of moisture 15 % Specific weight of briquettes 900-1100 kg/m3 Maximum noise level 62 dB Transport dimensions 1300-740-1120 mm Weight 233 kg Price 8190 Eur (EXW Jonava, Lithuania)

Condition: new, 20-26-537 FALACH hydraulic briquetting press (new) Type Falach 35 Briquette diameter 50mm Press capacity 25 - 40 kg / hour Briquette length approx. 20-40 mm Hopper volume 0.38 m3 Pump motor input 4 kW Power consumption 2.2 kW / hour Bedpfxsxrn Dxs Ak Eolg Required input voltage 3x400V, 16 A Oil cooler no Operation continuous Automatic reverse of support wheels yes Automatic switching-out yes Maximum percentage of moisture 15 % Specific weight of briquettes 900 kg / m3 Maximum noise level 68 dB Transport dimensions 1860 - 890 - 1100 mm Weight 400 kg Price 11 160 Eur (EXW Jonava, Lithuania)

Condition: new, 20-26-537/3 FALACH hydraulic briquetting press (new) Type 100 Briquette diameter 70 mm Press capacity 90 - 120 kg / hour Briquette length approx. adjustable 45 mm Hopper volume 0,75 m3 Pump motor input 11 kW Power consumption 8,2 kW/ hour Required input voltage and current 3x400V, 32 A Oil cooler yes Operation continuous Automatic reverse of support wheels yes Automatic switching-out yes Maximum percentage of moisture 15 % Specific weight of briquettes 900-1100 kg/m3 Maximum noise level 68 dB Bodpfjxrn Ukox Ak Eolg Transport dimensions 2220 - 1200 – 1510 mm Weight 810 kg Price 26 230 Eur (EXW Jonava, Lithuania)

Condition: new, 20-26-537/2 FALACH hydraulic briquetting press (new) Type 70 Briquette diameter 70 mm Press capacity 60 - 80 kg / hour Briquette length approx. 40 – 60 mm Hopper volume 0,75 m3 Pump motor input 7,5 kW Power consumption 4,9 kW/ hour Required input voltage and current 3x400V, 25 A Oil cooler no Operation continuous Automatic reverse of support wheels yes Automatic switching-out yes Maximum percentage of moisture 15 % Specific weight of briquettes 900-1100 kg/m3 Maximum noise level 68 dB Transport dimensions 2220 - 1200 – 1510 mm Weight 840 kg Bjdpexrn Tgjfx Ak Eolg Price 20 270 Eur (EXW Jonava, Lithuania)

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, A used briquette press C.F. Nielsen BP 5000 in very good condition Bsdpfx Aswiw Rxsk Eelg

Condition: ready for operation (used), Year of construction: 1996, Used Comafer 50/40 briquetting press. The briquetting press has undergone a complete overhaul. Bljdpfxsxzu Rdj Ak Ejg

Condition: refurbished (used), Year of construction: 2025, I sell the heavy duty briquetting press RUF RB440. Year 11/2002, Fully reconditioned with warranty 2025 Motor power 30kW Bedpjwun I Eefx Ak Eelg Productivity Amount 440 pcs. wood briquettes / hr. Wood briquette RUF 150 x 60 x 40-110mm (depends on material) Material humidity up to 15% Nominal pressing power 14200 N/cm2 Oil cooler included. Dimensions 3000 x 1800 x 2000 mm Total power 3000kg Composition right - right side input Condition after full recondition / 500 working hours warranty like new. Available immediately. Including full documentation and CE.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Amis ZBP 50 S Duo sawdust briquetting machine Year of production 2019 Blodpfjumwm Sox Ak Eeg Load capacity up to 140 kg depending on material 3.800 working hours Briquettes Ø 50 mm Tank with a capacity of 1.2 m³ Roller with feeder Pre-ironing Screw conveyor Hydraulic pump motors, 7.5 kW each Fan cooling Sawdust level sensor in the tank Hydraulic oil tank 100 l SIEMENS control system Dimensions length x width x height 3000 x 2400 x 1700 mm Weight 2000 kg The price of the new machine is 39.800 Euro

Condition: used, Year of construction: 2006, functionality: fully functional, Complete briquetting line 2 x RUF 330. Boiler room, drum dryer, conveyors. Bodpoxazhtefx Ak Eolg

Condition: new, Year of construction: 2025, Small hydraulic briquetting press. Main motor is 4 kW, briquette diameter is 50mm. Capacity of the press is 30-50 kg/hour. The machine is new, and has CE certificate. Customer can order it with oil cooler. For more information visit our YouTube channel, webpage or Facebook site. Blodpfxefk N Tpj Ak Eog

Condition: good (used), Year of construction: 2012, functionality: fully functional, BRIQUETTING and PELLETING technology: Machine type: BS70 Briquetting equipment The BS70 type BRIQUETTING PRESS equipment can be versatilely used for the processing of naturally renewable raw materials for the production of new, processed commercial goods. The equipment is used for processing and pressing materials such as straw, legumes, hay, paper, wood and other natural materials and their mixtures. The manufacturer designs the equipment according to the product to be processed. The moisture content of the raw materials to be processed is max. 10-12% and must not contain foreign matter (metal, gravel, sand, etc.). Pressing takes place without the addition of any additives or binders, only as a result of pressing, during which (depending on the base material) a density of over 1 kg/dm3 can be achieved. The resulting end product is automatically placed in the storage bags without manual handling, suitable for continuous operation. This can be ensured with 4 briquette presses (briquette diameter 70 mm) and 1 pelletizing machine (pellet diameter 6 mm), which can be installed in a 15x20x6.3 meter hall. The equipment is suitable for 16 hours of work per day, with 2 x 7 hours of continuous operation within that. The system consists of the following units: KSD900 Straw Grinder (2 Pcs): AVSZ70 Automatic control for material preparation (2 Pcs): Screw conveyors (3Pcs): Trough screw conveyor (2Pcs): CSV70 Pipeline (2Pcs): PFK70 Dust selection and dust filter (1 Pc): PF70 Dust filter (1Pc): ST70 Silo tank (6 m³) (2 Pcs): BS70 Briquette press (4 Pcs): The press piston presses the material into a conical tube, which creates a continuous rod with a diameter of 70 mm. The pressure is adjustable and the feed of the conveyor screw can be controlled in the same way. The exchangeability of the press tools enables the control of the quality and density of the manufactured briquettes. As an option for the various raw materials, we deliver various press scopes, which undergo testing before delivery, if the customer provides a raw material sample. By changing the press tool, the machine is also suitable for the production of litter and loose briquetting of feed, or even for making a mixture as an option. The material is pressed without binders or chemical additives. Depending on the density of the processed material, we obtain different products, the specific gravity of which can exceed 1 kg/dm3. The performance of the pelletizing and briquetting system is 1.5 tons/hour based on wheat straw. The performance of the production and the quality of the product are determined by the adjustable speed of the screw and the adjustable press pressure depending on the quality of the raw material. Electricity Demand 37+10 kW. Press pipe (4Pcs): Ribbed conveyor belt (1Pc) HF70 Cooling-heating operating temperature controller (4Pc): AVP70 Control (4Pcs): PELLETING technology for biomass: The manufactured finished product is a 6 mm pellet, 10-40 mm long. Raw material to be processed: hay, straws. Moisture content: max. 10%. To produce the pellets, the technology incl.:pre-shredding (drying), grinding, dosing unit ,moistening, pelletizing equipment, cooling system, screen, filter and a pellet bagger (manual) The type of the machine: MiniPell (1Pc) Bledpfx Akjubb Ubj Ejg machine performance: 50-120 kg/hour press engine: 10 kW dosing unit: 0,37 kW weight: 750 kg Grinder (1Pc): Control grid and Manual bagger (1Pc)

Condition: like new (used), Year of construction: 2025, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 1630, overall weight: 7,800 kg, warranty duration: 6 months, power: 85 kW (115.57 HP), Complete production line for sale, based on a Di Più BRIK MB100 briquetting press (complete production line). Fully refurbished DI PIU BRIK MB100 machine (factory-refurbished in 2025), ready for immediate operation. The machine is designed for high-capacity briquetting and is suitable for demanding industrial applications. The machine has approximately 2,000 operating hours. It has been newly refurbished at the Di Più factory: all vital components have been replaced, including all cables, electrical wiring, and required electrical equipment. The machine is brought to as-new condition and comes with a 6-month Di Più factory warranty. The machine can produce briquettes with or without a hole, with a diameter of 90mm to 110mm, using soft or hard wood, in either round or square shapes. Machine inspection is possible at the factory in Italy: Di Più Systems Srl, Via dell’Innovazione 11, 36042 Breganze (VI), Italy. The Di Più BRIK MB100 mechanical briquetting press is an automatic machine for compacting wood, sawdust, and other waste materials into wooden briquettes. The ideal humidity of the input material is between 8% and 12%, and the particle size between 1mm and 12mm. Technical data: - Production capacity: 1,300 – 2,300 kg/h (for sawdust density 160–200 kg/m³) - Briquette diameter: 90 – 110 mm - Main motor power: 75 kW - Total installed power: 98 kW - Piston compression pressure: 2,000 – 2,500 kg/cm² - Vertical screw with gearbox: 5.5 kW - Oil pump: 1.5 kW - Oil pump for extruder head closure: 1.5 kW - Feeder with screw and adjustable speed: 1.5 kW - Oil system for bronze bearing lubrication: 100 liters - Briquette output monitoring sensor (automatic shutdown when material supply runs out) - Safety covers for moving parts Bsdpfjwrp Emex Ak Eslg - Oil pressure sensor - Control cabinet - Input material storage hopper (buffer) - Level sensor for feed system monitoring - Machine weight: approx. 7,800 kg The machine is equipped with all necessary accessories for complete operation and integration into a briquetting line: ACCESSORIES – MB100: - Dosing silo: Made of heavy-duty steel. Diameter: 1,500 mm, height: 1,000 mm. Equipped with a rotary cutter with 2.2 kW gearbox, mounted on a robust steel frame. Material supply is monitored by a level sensor. - Briquette cooling line after extrusion, total length 20 meters - Automatic briquette cutting saw - The saw automatically cuts briquettes to the operator's preset lengths - Device for producing briquettes with a hole - Machine head cooling system with ice water - The system produces 50 liters/min of ice water for effective briquetting head cooling. - Air-cooled water chiller with hermetic scroll compressors, microprocessor control, and a large energy storage tank with an immersed water-to-refrigerant heat exchanger. - The heat exchanger is a high-efficiency fin-pack type, made of copper pipes and aluminum fins. - Water tank with a capacity of 800 liters - Water feed pump (50 l/min – 20 m.w.c. – 0.55 kW) with three-circuit DN25 valves for regulating cooling water temperature at the briquetting head - Digital electronic temperature controller connected to an NTC sensor (measuring element d.6 × 52 mm, IP68, AISI 316) OPTIONAL: NOVAPAC packaging machine Possibility to purchase an additional NOVAPAC packaging machine, fully compatible with the Di Più BRIK MB100 and other machines. An ideal solution for automatic packaging immediately after briquetting. Year: 2013 Price for Novapac: €19,000 Equipment visible in the las

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 109, briquette diameter: 80 mm, overall weight: 1,450 kg, TECHNICAL DETAILS Briquette type Briquette diameter: 80 mm Motor power: 11 kW Production output: 80 - 210 kg/h Machine performance Cycles per minute: 7 Number of cylinders: 3 Max. discharge length: 70 mm Container Ring diameter: 1,200 mm Container capacity: 1 m³ MACHINE DETAILS Dimensions and Weight Dimensions (L x W x H): 2,100 x 1,350 x 1,600 mm Weight: 1,450 kg Electrical Data Supply voltage: 400 V Frequency: 50 Hz Max. material moisture: 15 % EQUIPMENT Hydraulic oil machine Monoblock clamping system Capacitive sensor for automatic operation Viewing window End-of-cycle system Electronic pressure gauges for pump and clamping pressure Siemens touchscreen PLC Siemens display Operating hours counter Inductive limit switches LED machine position indicator Stamping unit Preheating system Oil level and temperature sensor Preparation for oil cooling in tank and material outlet Bsdpfx Aoxyi Ihek Eelg Power stabilizer Service tools

Condition: good (used), Year of construction: 2013, operating hours: 37,400 h, functionality: fully functional, machine/vehicle number: 2110, total width: 2,000 mm, total height: 2,100 mm, total length: 3,000 mm, overall weight: 5,500 kg, Hydraulic system: - Power-regulated axial piston double pump  Maximum operating pressure: 300 bar  Drive motor: 55 kW, 400 V, 50 Hz, 3-phase AC, 1,500 rpm  Motor designed as an energy-efficient motor, efficiency class EFF1  Protection class: IP 54 - Valve voltage: 24 Volt DC - Hydraulic tank (950 liters) with additional cooling and fine filter circuit, 5µm filter unit, drive 2.2 kW - Large double return filter integrated in the tank, 10µm filter unit - Hydraulic tank integrated into the supporting frame Electrical configuration: - Machine control cabinet according to DIN EN60204-VDE 0113, protection class IP 54 - Input voltage: 400 Volt, 50 Hz - With lockable main switch inside the enclosure - Emergency stop button in the control cabinet - Control voltage: 24 Volt DC - Freely programmable control (PLC) SIEMENS S7-200 - with Siemens TP 177B operation and display panel  Display and modify operational states and values  Perform operations  Display error messages Blodpfx Ajxwiziek Eeg - Automatic start/stop via light barrier integrated in the feed hopper - All initiators with contactless switching - Gear motors and pump motor with thermal winding protection contacts Material feed: - Feed hopper with fill opening of 800 x 400 mm - Robust sheet steel construction with reinforcements - Hopper volume approx. 150 liters - Agitator to prevent bridging, powered by 0.55 kW drive - Feed screw with 1.5 kW drive - Feed time automatically controlled by PLC Pre-compactor: Vertically arranged, hydraulically operated. - Pre-compactor pressure adjustable via TP 177B - Dust-tight control enabled by the distance measurement system developed and patented by RUF Main compactor: Horizontally arranged, hydraulically operated. - Press pressure adjustable via TP 177B up to 300 bar - Hydraulic cylinder 350, with a pressing force up to 300 tons Press output: - Depending on settings and material, up to 600 pieces per hour (approx. 800 - 1,000 kg/h) Briquette dimensions: - 240 x 70 mm - Briquette length 70 - 110 mm; depending on settings and the type and bulk density of the material to be briquetted - Max. specific pressing pressure approx. 1,776 kg/cm²