Used Bridgeport Series 1 for sale (41)

Condition: ready for operation (used), Year of construction: 2000, Control Unit Brand HEIDENHAIN Model TNC 426 Main Drive Number of axis 3 This 3-axis Bridgeport VMC600 22 digital was manufactured in 2000. It's a vertical machining center equipped with the Heidenhain T.N C 426 control system, ensuring precise and efficient milling operations. Ideal for a variety of milling applications, this machine represents a valuable addition to any workshop. If you are looking to get high-quality milling capabilities, consider the Bridgeport VMC600 22 digital machine we have for sale. Contact us for further details regarding this machine. Kodpfxsx D Huts Ad Newt Application Types Milling

Condition: used, Year of construction: 2002, Technical details: x-travel: 600 mm y-travel: 410 mm z-travel: 520 mm tool change unit: 16 turning speeds: 8000 1/min control: SIEMENS 810 shopmill table surface area: 840 x 420 mm rapid traverse X- and Y-axis: 36 m/min rapid traverse Z-axis: 20 m/min taper ISO: SK 40 Ksdsviwg Uepfx Ad Newt spindle drive: 15 kW weight of the machine ca.: 2,5 t space requirements approx. LxWxH: 2,2 x 2,3 x 2,3 m vertical machining center, el. handwheel, no chipconveyor, approx. h "machine on", approx. h "spindle on" *

Year of construction: 2003, condition: good (used), Traverses X Y Z: 810 x 610 x 500mm, Table 350mm diameter, C axis (rotary) 360o, A axis (Tilt) +30o/-120o, Spindle speed 12000 rpm, Spindle taper BT40, Spindle Motor 13kW, Rapid feedrates 43m/minute, Heidenhain TNC530, 30 Station side arm ATC, Coolant, Low Volt light Kwjdpfx Adek Shihs Not

Condition: ready for operation (used), Year of construction: 2000, operating hours: 6,173 h, functionality: limited functionality, machine/vehicle number: 822003, travel distance X-axis: 600 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 20 m/min, feed length X-axis: 600 mm, feed length Y-axis: 410 mm, feed length Z-axis: 520 mm, nominal power (apparent): 15 kVA, controller manufacturer: Heidenhain, controller model: TNC 426PB, total height: 2,535 mm, total length: 2,020 mm, total width: 2,000 mm, table width: 840 mm, table length: 420 mm, table load: 500 kg, overall weight: 2,500 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 6,000 rpm, spindle motor power: 8,500 W, number of spindles: 1, number of slots in tool magazine: 22, tool length: 250 mm, tool diameter: 130 mm, tool weight: 6,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, The milling machine is still running, while I'm writing this description, which proves it’s in good condition. We purchased the machine used, and it has had one defect from the beginning — when entering drilling cycles from the operator panel, the machine freezes and needs to be restarted. However, if a program containing drilling cycles is uploaded to the machine via the RS232 port, those cycles run correctly. Apart from that, all other components of the mill operate flawlessly. We’re also including a table-mounted rotary table (fourth axis) Magerl Rotamatik 120. The machine is for sale, because Heidenhain operators are hard to find in our area, and we want to buy something with HAAS controls instead. Kodpfjxrca Uex Ad Nswt

Condition: ready for operation (used), Year of construction: 2000, - USED - 3-AXIS VERTICAL MACHINING CENTRE   X-AXIS TRAVEL: 800 mm Y-AXIS TRAVEL: 510 mm Z-AXIS TRAVEL: 600 mm SPINDLE: 8000 rpm; BT 40 TABLE SIZE: 1000 x 490 mm Kwodpfx Adsxvfvms Nst MAX ADMITTED LOAD: 750 Kg TOOL MAGAZINE: BASKET-TYPE ; 20 POS CONTROL UNIT: HEIDENHAIN TNC 410 WEIGHT: 3600 Kg OVERALL DIMENSIONS: 3160 x 2160 x 2740 mm

Condition: like new (used), Year of construction: 2012, Bridgeport VMC 600 ECO Machining Center Bridgeport VMC 600 EC with Heidenhain ITNC 530 Control, Year of manufacture 2012, in excellent original condition. The machine comes from the training workshop of a renowned German engineering company. Tjbqsxqc Iceuwlfwjd CE compliant!! Technical Data: Year of manufacture: 2012 Condition: Good Kwsdpfxjxtxk So Ad Not Control system: HEIDENHAIN ITNC 530 Travel in the X/Y/Z axes: 600/410/520 mm Rapid traverse in X/Y/Z axes: 40/40/20 m/min Table dimensions (L x W): 840 x 420 mm Maximum workpiece weight: 500 kg Maximum spindle speed: 8,000 rpm Minimum spindle speed: 40 rpm Spindle taper: BT 40 Spindle drive power: 8.5 kW Maximum tool length: 250 mm Maximum tool weight: 6 kg T-slot width: 18 mm T-slot spacing: 112 mm Positioning accuracy: ± 0.005 mm Repeat accuracy: ± 0.002 mm Power supply: 3x 400 V; 50 Hz Dimensions (L x W x H): 2000 x 2050 x 2535 mm About the machine: Offered here is a Bridgeport VMC 600 EC machining center equipped with a Heidenhain ITNC 530 control system. This machining center is in excellent original condition. It comes from a facility where it was used sparingly for training purposes only. The control system is very user-friendly. The guides are lubricated regularly via the central lubrication system. The Bridgeport VMC 600 EC has been mechanically and electrically inspected by us. Take the opportunity to view and test the Bridgeport VMC 600 EC under power on site. You can find further milling machines from well-known manufacturers on our website.

Year of construction: 2001, condition: excellent (used), Description Universal CNC Turning Lathe from Bridgeport apply for toolmaker , mold maker, education and Locksmith Turning diameter : 430mm Control : Fanuc 20 T Technical data Turning diameter 430mm Turning lenght 1000mm Control Fanuc 20 T Tailstock MK 4 Tools Multifix Speeds 1-4000U/min Kwedpfx Adjfglx Ro Net Power supply 380V - 7,5 KW Contact person: AWM GmbH Herr Mario Wurm

Year of construction: 1995, condition: ready for operation (used), machine/vehicle number: 20910, table mounting size: 1000 x 490 mm movements x/y/z: 800/510/500 mm spindle taper: ISO 40 ISA min./max. distance table/spindle: 120/620 mm spindle turning speed range: 40 - 6000 rpm number of tool positions: 22 pieces carriages: x/y 1 - 3200 / z 1 - 2000 mm/min Kwedpfedt Ttkjx Ad Net rapid move: x/y 1 - 3,2, z 1 - 2 m/min electrical connection: 380 V, 19 kW space needed: 2850 x 2150 x 2600 mm weight: 3800 kg

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 710 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, workpiece weight (max.): 500 kg, spindle speed (max.): 12,000 rpm, A set of 3 Bridgeport XR 700 HMCHP machines is up for auction: 1. Machine Serial number: 460P367 Year of manufacture: 2007 2. Machine Serial number: 460P389 Year of manufacture: 2007 Kedoxgn T Nopfx Ad Nowt 3. Machine Serial number: 460P394 Year of manufacture: 2007 TECHNICAL DETAILS Travels X-axis: 710 mm Y-axis: 610 mm Z-axis: 610 mm Pallet size: 500 mm x 500 mm Maximum workpiece weight: 500 kg Number of pallets: 2 Spindle taper: BT-40 Spindle speed: 12,000 rpm Spindle motor power: 30 kW MACHINE DETAILS Control system: Fanuc Series 18iMB Dimensions & Weight Dimensions: 4,650 x 3,675 x 2,400 mm Weight: 13,000 kg Note: The machine requires transportation with oversize width.

Condition: ready for operation (used), Year of construction: 2003, operating hours: 5,117 h, functionality: fully functional, machine/vehicle number: 723503, travel distance X-axis: 710 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, table width: 500 mm, table length: 500 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 60, TECHNICAL DETAILS Kwsdpfx Ajvn Rf Ied Not Control: Fanuc 18i-MB Pallet size: 500 x 500 mm X-travel: 710 mm Y-travel: 610 mm Z-travel: 610 mm B-axis: 360° (steps of 0.001°) Max. pallet load: 500 kg Spindle Spindle mount: ISO 40 (large-area spindle) Spindle speed: max. 10,000 rpm Number of tool positions: 60 pieces MACHINE DETAILS Dimensions: 3,675 x 4,510 x 3,100 mm Weight: 13,000 kg Operating hours: 730 h Cutting time: 5117 h Part counter: 55,588 pieces

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 080026B, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, workpiece weight (max.): 272 kg, spindle speed (max.): 30,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Kedpowzx A Hsfx Ad Nswt Travel Paths X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Feed and Spindle Feed rates: 15 m/min Spindle speed: 30,000 rpm Spindle power: 9 kW Spindle taper: HSK 40 Work Table Table size: 600 × 500 mm T-slots: 4 at 110 mm Max. table load: 272 kg Tool Changer Tool changer: 16 positions Max. tool weight: 1 kg Max. tool length: 90 mm Max. tool diameter: 16 mm Control Control unit: Heidenhain iTNC 530 MACHINE DETAILS Electrical Data Voltage: 400 V Phases: 3 Ø Frequency: 50/60 Hz Full load current: 50 A Dimensions & Weight Dimensions: 220 × 215 × 280 cm Net weight: 3,200 kg

Condition: refurbished (used), Year of construction: 1996, Bridgeport Milling Machine 2HP Variable Speed Rebuilt Machine Table has been reground on 3 Sides Kjdpfxsgvqkue Ad Nswt Excellent Condition Chrome Bed ways Ball Screw Leadscrews X & Y Axis Table Size 48” X 9” Spindle Speeds 50-4200rpm Brand New X Axis Powered Traverse Brand New 3 Axis Digital Readout ( X & Y & Quill Axis ) Brand New Coolant Pump Brand New LED Worklight Hand Pump Lubricated Ways ( Re piped) Reground R8 Spindle Taper Coolant Tray 3 Phase 400v Fully Serviced Ready For Work Head has been fully stripped down and rebuilt new bearings , belts & Super Precision Spindle Bearings Replaced Warranty Included

Year of construction: 2000, condition: ready for operation (used), Travel X/Y/Z: 600mm/410mm/520mm, table dimensions X/Y: 840mm/420mm, spindle speed: 6000rpm, spindle power: 8.5kW, tool holder: SK40, tool positions: 22, rapid traverse X/Y/Z: 36m/36m/20m/min. Machine dimensions X/Y/Z: approx. 2200mm/2300mm/2300mm, weight: approx. 2500kg, control: Heidenhain TNC 426. An on-site inspection is possible. Kwsdpfx Adov Uqb Ns Not

Condition: reconditioned (used), Year of construction: 2025, functionality: fully functional, travel distance X-axis: 838 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 406 mm, spindle speed (min.): 50 rpm, quill travel distance: 127 mm, table width: 299 mm, table length: 1,245 mm, overall weight: 1,000 kg, input voltage: 400 V, warranty duration: 6 months, Rebuilt Bridgeport Milling Machine 2HP Variable Speed Fully Rebuilt Head And Machine Table has been reground on 3 Sides Bed ways have been reground and re scrapped in Brand New Lead Screws imperial X & Y & Z New Lead screw bushes imperial X, Y & Z Table Size 42” X 9” 50-4200rpm Brand New X Axis Powered Traverse Brand New Y Axis Powered Traverse Brand New 2 Axis Digital Readout ( X & Y Axis ) Kwjdpfx Adsw Id U Hs Njt Brand New Coolant Pump & System Brand New LED Worklight Hand Pump Lubricated Ways ( Re piped) Reground R8 Spindle Taper Coolant Tray Power - 3 Phase 400v (original wiring & Motor Pre CE) Comes with a techno piu machine safety guard fitted as shown in the photo which is interlocked Fully Serviced Ready For Work Head has been fully stripped down and rebuilt new shafts, new bearings , belts & Super Precision Spindle Bearings Replaced Warranty Included

Condition: good (used), travel distance X-axis: 745 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 300 mm, Bridgeport milling machine Type: Interact 4 Control: Heidenhain TNC 155 Kwjdpjqgcdtjfx Ad Net X-path: 745 mm Y-path: 370 mm Z-path: 300 mm Bed: 960 x 380 mm Spindle: ISO 40 Dimensions: 185x180x235 cm LxWxH

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 0500071, SPECIFICATION Table Size 600 x 320mm X axis traverse 450mm Y axis traverse 350mm Z axis traverse 380mm Spindle BT40 Spindle Speeds 0-8000rpm Spindle Motor 10kW Rapid feed rates all axes 30m/min Toolchanger capacity 12 Tools Toolchanger change time 8 Seconds Approximate Weight 2000Kg   Machine equipped with:- Siemens 810D Shopmill CNC Control 4th axis unit Swarf auger Lighting Kwsdpfjtylazjx Ad Net Coolant system Enclosed guarding

Condition: used, Milling machine with Heidenhain control Bridgeport Interact 1. Runs perfectly. Kodexiwkcopfx Ad Nowt

Condition: good (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 500 mm, CNC control Heidenhain iTNC 530 Kedpfxex U Rxye Ad Newt electronical hand wheel 20-fold automatic tool changer chip tank Technische Daten / technical details: Verfahrweg X / X-Travel 1000 mm Verfahrweg Y / Y-Travel 510 mm Verfahrweg Z / Z-Travel 500 mm Tischgröße / table size 1150x540 mm Werkzeugschaft / spindle taper BT40 Drehzahlbereich / spindle speed 8000 UpM /rpm Anzahl der Werkzeugplätze / tool places in ATC 20 Gewicht der Maschine ca. / weight ca. 5000 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), Year of construction: 2001, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 43,000 m/min, feed rate Y-axis: 43,000 m/min, feed rate Z-axis: 30,000 m/min, table width: 580 mm, table length: 1,150 mm, table load: 900 kg, X - Travel: 1020mm Y - Travel: 610mm Z - Travel: 600mm Table Length: 1150mm Table Width: 580mm Table load: 900 Feed rate X-Axis: 43000mm/min. Feed rate Y-Axis: 43000mm/min. Feed rate Z-Axis: 30000mm/min. Spindle Taper: 40ISO/Bt/Mk Kwjdpsx Tfuaefx Ad Not Power on spindle: 13kW Speeds / ranges: 8000Rpm ATC / revolver: 30 Number of controlled axis:3 Chip conveyor: yes Coolantsystem: yes Length: 2830mm Width: 2340mm Height: 2683mm Weight: 3600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, table width: 900 mm, table length: 500 mm, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Travels x-axis travel: 600 mm y-axis travel: 500 mm z-axis travel: 600 mm Spindle Spindle speed – infinitely variable: 0–12,000 rpm Spindle motor: 10 kW Tool holder: SK40 DIN 69871 Table Clamping surface: 900 × 500 mm Control Control system: iTNC 530 Heidenhain Tool Magazine Number of tool positions in magazine: 24 MACHINE DETAILS Electrical Data Total power requirement: 22 kW Weight and Dimensions Machine weight: approx. 6,4 t Space requirements: approx. 5.3 × 3.5 × 3.5 m EQUIPMENT Scraper-belt chip conveyor Coolant system with 3 pumps and cartridge filter High-pressure pump Grundfoss type CRK2-220/22 A-W-A-AUUV Kwodpjwynrzjfx Ad Nst

Condition: ready for operation (used), Year of construction: 2006, General Data Measurements width 5500 mm Measurements depth 4400 mm Measurements height 2900 mm Kwjdpfx Asx D Hk Ijd Not Control Unit Brand SIEMENS Model 810T Main Drive Number of axis 3 Movement X-Axis Movement 1250 mm This 3-axis Hardinge Bridgeport MMD VMC1250 P3 vertical machining centre was manufactured in 2006. It features a Siemens 810T control system and offers an impressive X-axis travel of 1250 mm, making it suitable for various milling applications. The machine's transport dimensions are approximately 4400 mm in width, 5500 mm in depth, and 2900 mm in height. Consider the opportunity to buy this Hardinge Bridgeport MMD VMC1250 P3 machine we have for sale. Contact us for further details. Application Types Milling

Condition: good (used), Year of construction: 2009, XYZ: 1020 x 540 x 540mm, Table 1120 x 540mm, 15kW, Heidenhain tnc 530 , 10,000 rpm, 24 station ATC, BT40 taper, low volt light, swarf conveyor, coolant. Kodpfoxfvnrox Ad Nowt

Condition: used, Year of construction: 2005, CNC Machining Center HARDINGE BRIDGEPORT XP610 (Year 2005) Condition: Good, technically sound. Manufacturer: Hardinge / Bridgeport (USA / UK) Model: XP610 Year of manufacture: 2005 A compact and reliable CNC vertical machining center designed for precise milling, drilling, and tapping of metal parts. The Bridgeport XP series is known for its high accuracy, robust construction, and reliable control system, making it an excellent solution for manufacturing processes where precision and repeatability are crucial. Main technical specifications: (according to Hardinge Bridgeport XP610 model specifications) Control system: Heidenhain iTNC 530 Travel (X / Y / Z): 610 × 510 × 510 mm Table size: 800 × 520 mm Max. table load: 500 kg Spindle speed: up to 10,000 rpm Spindle taper: BT40 Tool changer: 20 positions (automatic) Spindle motor: 11–15 kW Cooling: integrated coolant system Power supply: 400 V / 50 Hz Machine weight: approx. 6,000 kg Application: Kwsdpfx Adjxqp Ene Nst The Hardinge Bridgeport XP610 is designed for precision machining of components and parts: - Metal, aluminum, copper, and brass workpieces - Tool and die manufacturing - Production of mechanical components and industrial parts Suitable for both small batch and series production where a precise, stable, and repeatable result is required. If you have any further questions, please feel free to contact us.

Condition: used, Year of construction: 2005, functionality: fully functional, Manufacturer: Hardinge / Bridgeport (USA / UK) Model: XP1000 Year of Manufacture: 2005 Reliable and efficient CNC vertical machining center designed for milling, drilling, and tapping a wide range of metal components. The Bridgeport XP series is renowned for its robust construction, high precision, and fast processing capabilities, making it ideal for both job shop and series production. Main technical specifications: (based on Hardinge Bridgeport XP1000 specification) Control: Heidenhain iTNC 530 Travel: X = 1020 mm / Y = 510 mm / Z = 635 mm Table size: 1200 × 520 mm Max. table load: 700 kg Spindle speed: up to 10,000 rpm Spindle taper: BT40 Tool changer: 20 positions (automatic) Spindle motor: 15 kW Machine weight: approx. 7,000 kg Power supply: 400 V / 50 Hz Cooling system: integrated Application: The Hardinge Bridgeport XP1000 is designed for precision metalworking—milling, drilling, tapping, and contour machining. Kwjdsxqpruspfx Ad Not Ideally suited for: - Tool, mold, and component manufacturing - Automotive, equipment, and industrial sectors - Situations requiring accuracy, reliability, and consistent performance If you have any further questions, we will be happy to assist you.

Condition: good (used), Year of construction: 2002, travel distance X-axis: 1,050 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain, 3-Axis Machining Center Manufacturer: Bridgeport Model: VMC-1000 XP Year of manufacture: 10-2002 Control type: Heidenhain iTNC-530 Operating hours: n/a S/N: 82XXXX Technical Data: ----- - Travel X-Y-Z: 1,050 x 610 x 600 mm - Spindle: max. 8,000 rpm - Tool holder: SK40 - Tool magazine: 22 positions - Coolant system - Through-spindle coolant (IKZ) - Glass scales on all axes X-Y-Z - Central lubrication - Weight: approx. 4.2 t - Dimensions LxWxH: 3,000 x 2,350 x 2,400 mm Accessories: ----- - Manuals - Tool holder package Special features: ----- Kjdow Nyfdspfx Ad Nowt - Through-spindle coolant (IKZ) deactivated due to defective flow tube in spindle - Spindle replaced in 2023, few hours of operation, precise concentricity